PARALLEL IN SERIAL OUT Digital Shift Registers 1,427

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
HD74HC166FPEL	Renesas Electronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	4.5	2/6	SMALL OUTLINE	SOP16,.3	220 ns	Shift Registers	1.27 mm	85 Cel	RIGHT	POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G16	1	6 V	2.2 mm	5.5 mm	Not Qualified	TRUE	2 V			20	260	10.06 mm	HC/UH
HD74LS166AP	Renesas Electronics	PARALLEL IN SERIAL OUT	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	1	25000000 Hz	TTL		8	5	5	IN-LINE	DIP16,.3	25 ns	Shift Registers	2.54 mm	75 Cel	RIGHT	POSITIVE EDGE	-20 Cel		DUAL	25 MHz	R-PDIP-T16	1	5.25 V	5.06 mm	7.62 mm	Not Qualified	TRUE	4.75 V	SISO OPERATION ALSO AVAILABLE				19.2 mm	LS
HD74LV166AT	Renesas Electronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	1		CMOS		8	2.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		26 ns		.65 mm	85 Cel	RIGHT	POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V					5 mm	LV/LV-A/LVX/H
HD74AC166P	Renesas Electronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	1		CMOS		8	3.3		IN-LINE		15.5 ns		2.54 mm	85 Cel	RIGHT	POSITIVE EDGE	-40 Cel		DUAL	80 MHz	R-PDIP-T16		3.6 V	5.06 mm	7.62 mm	Not Qualified	TRUE	3 V	ALSO OPRATES AT 5V VCC NOMINAL; CLOCK INHIBIT				19.2 mm	AC
HD74HC165RP-EL	Renesas Electronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1		CMOS		8	5		SMALL OUTLINE		38 ns		1.27 mm	85 Cel	RIGHT	POSITIVE EDGE	-40 Cel		DUAL	21 MHz	R-PDSO-G16		6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V	CLOCK INHIBIT				9.9 mm	HC/UH
HD74LS166AFP-E	Renesas Electronics	PARALLEL IN SERIAL OUT	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1		TTL		8	5		SMALL OUTLINE		25 ns		1.27 mm	75 Cel	RIGHT	POSITIVE EDGE	-20 Cel	TIN BISMUTH	DUAL	25 MHz	R-PDSO-G16	1		2.2 mm	5.5 mm	Not Qualified	TRUE			e6			10.06 mm	LS
HD74AC166T	Renesas Electronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	1		CMOS		8	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		15.5 ns		.65 mm	85 Cel	RIGHT	POSITIVE EDGE	-40 Cel		DUAL	80 MHz	R-PDSO-G16		3.6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	3 V	ALSO OPRATES AT 5V VCC NOMINAL; CLOCK INHIBIT				5 mm	AC
5962R9662302VEX	Renesas Electronics	PARALLEL IN SERIAL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, METAL-SEALED COFIRED	NO	1		CMOS		8			IN-LINE				2.54 mm	125 Cel	RIGHT	POSITIVE EDGE	-55 Cel		DUAL	12 MHz	R-CDIP-T16			5.08 mm	7.62 mm	Qualified	TRUE						19.05 mm	4000/14000/40000
HD74LV165AFP-EL	Renesas Electronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1		CMOS		8	2.5		SMALL OUTLINE		28 ns		1.27 mm	85 Cel	RIGHT	POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G16		5.5 V	2.2 mm	5.5 mm	Not Qualified	COMPLEMENTARY	2 V	CLOCK INHIBIT				10.06 mm	LV/LV-A/LVX/H
HCS165DMSR	Renesas Electronics	PARALLEL IN SERIAL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	200k Rad(Si)	CERAMIC, METAL-SEALED COFIRED	NO	1		CMOS	MIL-PRF-38535 Class V	8	5	5	IN-LINE	DIP16,.3	41 ns	Shift Registers	2.54 mm	125 Cel	RIGHT	POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL	20 MHz	R-CDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V		e3				HC/UH
5962R9662302VEC	Renesas Electronics	PARALLEL IN SERIAL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	100k Rad(Si)	CERAMIC, METAL-SEALED COFIRED	NO	1		CMOS	MIL-PRF-38535 Class V	8	5		IN-LINE		432 ns		2.54 mm	125 Cel	RIGHT	POSITIVE EDGE	-55 Cel	GOLD	DUAL	8.5 MHz	R-CDIP-T16		18 V	5.08 mm	7.62 mm	Qualified	TRUE	3 V		e4			19.05 mm	4000/14000/40000
HD14021BP	Renesas Electronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	1				8	5		IN-LINE		1000 ns		2.54 mm	85 Cel	RIGHT	POSITIVE EDGE	-40 Cel		DUAL	3 MHz	R-PDIP-T16		18 V	5.06 mm	7.62 mm	Not Qualified	TRUE	3 V					19.2 mm	4000/14000/40000
HD74LS165AFP-E	Renesas Electronics	PARALLEL IN SERIAL OUT	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1		TTL		8	5		SMALL OUTLINE		25 ns		1.27 mm	75 Cel	RIGHT	POSITIVE EDGE	-20 Cel	TIN BISMUTH	DUAL	25 MHz	R-PDSO-G16	1		2.2 mm	5.5 mm	Not Qualified	COMPLEMENTARY			e6			10.06 mm	LS
HD74HC165RP	Renesas Electronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1		CMOS		8	4.5		SMALL OUTLINE		190 ns		1.27 mm	85 Cel	RIGHT	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		R-PDSO-G16		6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V		e0			9.9 mm	HC/UH
HD74AC165T	Renesas Electronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	1		CMOS		8	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		21.5 ns		.65 mm	85 Cel	RIGHT	POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G16		3.6 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	3 V	ALSO OPRATES AT 5V VCC NOMINAL; CLOCK INHIBIT				5 mm	AC
HD74LS166AP-E	Renesas Electronics	PARALLEL IN SERIAL OUT	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	1		TTL		8	5		IN-LINE		25 ns		2.54 mm	75 Cel	RIGHT	POSITIVE EDGE	-20 Cel		DUAL	25 MHz	R-PDIP-T16	1	5.25 V	5.06 mm	7.62 mm	Not Qualified	TRUE	4.75 V	SISO OPERATION ALSO AVAILABLE				19.2 mm	LS
HD74AC165T-ELL	Renesas Electronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	1		CMOS		8	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		21.5 ns		.65 mm	85 Cel	RIGHT	POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G16		3.6 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	3 V	ALSO OPRATES AT 5V VCC NOMINAL; CLOCK INHIBIT				5 mm	AC
HD74AC166FP-EL	Renesas Electronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1		CMOS		8	3.3		SMALL OUTLINE		15.5 ns		1.27 mm	85 Cel	RIGHT	POSITIVE EDGE	-40 Cel		DUAL	80 MHz	R-PDSO-G16		3.6 V	2.2 mm	5.5 mm	Not Qualified	TRUE	3 V	ALSO OPRATES AT 5V VCC NOMINAL; CLOCK INHIBIT				10.06 mm	AC
HD74AC165FP	Renesas Electronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1		CMOS		8	3.3		SMALL OUTLINE		21.5 ns		1.27 mm	85 Cel	RIGHT	POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G16		3.6 V	2.2 mm	5.5 mm	Not Qualified	COMPLEMENTARY	3 V	ALSO OPRATES AT 5V VCC NOMINAL; CLOCK INHIBIT				10.06 mm	AC
HD74LS165AFPEL	Renesas Electronics	PARALLEL IN SERIAL OUT	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1		TTL		8	5		SMALL OUTLINE		25 ns		1.27 mm	75 Cel	RIGHT	POSITIVE EDGE	-20 Cel		DUAL	35 MHz	R-PDSO-G16		5.25 V	2.2 mm	5.5 mm	Not Qualified	COMPLEMENTARY	4.75 V					10.06 mm	LS
HD74HC165P-E	Renesas Electronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	1		CMOS		8	4.5		IN-LINE		190 ns		2.54 mm	85 Cel	RIGHT	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDIP-T16	1	6 V	5.06 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V		e4			19.2 mm	HC/UH
HD74ACT165T-ELL	Renesas Electronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	1		CMOS		8	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		16.5 ns		.65 mm	85 Cel	RIGHT	POSITIVE EDGE	-40 Cel		DUAL	60 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V	CLOCK INHIBIT				5 mm	ACT
HD74ACT166FP-E	Renesas Electronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1		CMOS		8	5		SMALL OUTLINE		13.5 ns		1.27 mm	85 Cel	RIGHT	POSITIVE EDGE	-40 Cel	TIN BISMUTH	DUAL	80 MHz	R-PDSO-G16	1	5.5 V	2.2 mm	5.5 mm	Not Qualified	TRUE	4.5 V		e6			10.06 mm	ACT
HD74LV166AFP-E	Renesas Electronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1		CMOS		8	2.5		SMALL OUTLINE		26 ns		1.27 mm	85 Cel	RIGHT	POSITIVE EDGE	-40 Cel	TIN BISMUTH	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	2.2 mm	5.5 mm	Not Qualified	TRUE	2 V		e6			10.06 mm	LV/LV-A/LVX/H
HD74HC674RP	Renesas Electronics	PARALLEL IN SERIAL OUT		GULL WING	24	SOP	RECTANGULAR		PLASTIC/EPOXY	YES								SMALL OUTLINE				1.27 mm						DUAL		R-PDSO-G24			2.5 mm	8.4 mm	Not Qualified							15.8 mm	HC/UH
HD74AC165P	Renesas Electronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	1		CMOS		8	3.3		IN-LINE		21.5 ns		2.54 mm	85 Cel	RIGHT	POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDIP-T16		3.6 V	5.06 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V	ALSO OPRATES AT 5V VCC NOMINAL; CLOCK INHIBIT				19.2 mm	AC
74HC166FPEL-E	Renesas Electronics	PARALLEL IN SERIAL OUT																																						NOT SPECIFIED	NOT SPECIFIED
CD4014BMS	Renesas Electronics	PARALLEL IN SERIAL OUT
74HC597FPEL-E	Renesas Electronics	PARALLEL IN SERIAL OUT																																						NOT SPECIFIED	NOT SPECIFIED
CD4021BMS	Renesas Electronics	PARALLEL IN SERIAL OUT
CD74HCT165H	Renesas Electronics	PARALLEL IN SERIAL OUT	MILITARY								1	18000000 Hz	CMOS		8	5	5		DIE OR CHIP	50 ns	Shift Registers		125 Cel	RIGHT	POSITIVE EDGE	-55 Cel						5.5 V			Not Qualified	COMPLEMENTARY	4.5 V						HCT
CD4021BKMSR	Renesas Electronics	PARALLEL IN SERIAL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR	100k Rad(Si)	CERAMIC, METAL-SEALED COFIRED	YES	1		CMOS	MIL-PRF-38535 Class V	8	5		FLATPACK		432 ns		1.27 mm	125 Cel	RIGHT	POSITIVE EDGE	-55 Cel	GOLD	DUAL	2.22 MHz	R-CDFP-F16			2.92 mm	6.73 mm	Not Qualified	TRUE			e4				4000/14000/40000
CD74HCT166H	Renesas Electronics	PARALLEL IN SERIAL OUT	MILITARY								1	16000000 Hz	CMOS		8	5	5		DIE OR CHIP	50 ns	Shift Registers		125 Cel	RIGHT	POSITIVE EDGE	-55 Cel						5.5 V			Not Qualified	TRUE	4.5 V						HCT
CD4021BDMSR	Renesas Electronics	PARALLEL IN SERIAL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	100k Rad(Si)	CERAMIC, METAL-SEALED COFIRED	NO	1		CMOS	MIL-PRF-38535 Class V	8	5		IN-LINE		432 ns		2.54 mm	125 Cel	RIGHT	POSITIVE EDGE	-55 Cel	GOLD	DUAL	2.22 MHz	R-CDIP-T16			5.33 mm	7.62 mm	Not Qualified	TRUE			e4			9.585 mm	4000/14000/40000
CD74HCT597H	Renesas Electronics	PARALLEL IN SERIAL OUT	MILITARY								1	16000000 Hz	CMOS		8	5	5		DIE OR CHIP	48 ns	Shift Registers		125 Cel	RIGHT	POSITIVE EDGE	-55 Cel						5.5 V			Not Qualified	TRUE	4.5 V						HCT

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.