SERIAL IN PARALLEL OUT Digital Shift Registers 2,135

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74AHCT594NSRE4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	95000000 Hz	CMOS		8		5	5		SMALL OUTLINE	SOP16,.3	10.1 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED	e4	30	260	10.2 mm	AHCT/VHCT/VT
SN74AHCT595PWLE	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	85000000 Hz	CMOS		8		5	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	11.4 ns		Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	115 MHz	R-PDSO-G16		5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED		NOT SPECIFIED	NOT SPECIFIED	5 mm	AHCT/VHCT
SN74HC594N-00	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		8		5		50 pF	IN-LINE		37 ns			2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER				19.305 mm	HC/UH
SN74LS164DRG4	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	TTL		8		5	5		SMALL OUTLINE	SOP14,.25	32 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	36 MHz	R-PDSO-G14	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V		GATED SERIAL INPUTS (A AND B)	e4	30	260	8.65 mm	LS
SN74AHC595NSRG4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	85000000 Hz	CMOS		8		3.3	2/5.5		SMALL OUTLINE	SOP16,.3	18.5 ns		Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	115 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	AHC/VHC/H/U/V
SN74AHCT595DRE4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	85000000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	11.4 ns	8 Amp	Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	.04 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE	e4	NOT SPECIFIED	260	9.9 mm	AHCT/VHCT/VT
SN74LV164ADBRG4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	45000000 Hz	CMOS		8		2.5	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP14,.3	24 ns		Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	105 MHz	R-PDSO-G14	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V			e4	30	260	6.2 mm	LV/LV-A/LVX/H
CD74AC164M96E4	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	54000000 Hz	CMOS		8		3	3.3/5		SMALL OUTLINE	SOP14,.25	157 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	75 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	1.5 V			e4	30	260	8.65 mm	AC
SN74HCS594QWBQBRQ1	Texas Instruments	SERIAL IN PARALLEL OUT		NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1	54000000 Hz	CMOS	AEC-Q100	8		5		50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.1X.14,20	45 ns	7.8 Amp		.5 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	68 MHz	R-PQCC-N16	1	6 V	.8 mm	2.5 mm		TRUE	2 V	.002 mA		e4		260	3.5 mm	HC
CD4015BNSRE4	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	3000000 Hz	CMOS		4		5	5/15		SMALL OUTLINE	SOP16,.3	320 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	8.5 MHz	R-PDSO-G16		18 V	2 mm	5.3 mm	Not Qualified	TRUE	3 V		INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	4000/14000/40000
SN74LS596J	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		8		5	5	30 pF	IN-LINE	DIP16,.3	30 ns		Shift Registers	2.54 mm	70 Cel	RIGHT	OPEN-COLLECTOR	POSITIVE EDGE	0 Cel		DUAL	20 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	55 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	LS
TPIC6C595N	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		8	TUBE	5	5	30 pF	IN-LINE	DIP16,.3			Shift Registers	2.54 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4			19.305 mm	6C
SN74AHCT595N	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	1	85000000 Hz	CMOS		8	TUBE	5	5	50 pF	IN-LINE	DIP16,.3	11.4 ns	8 Amp	Shift Registers	2.54 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	115 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	.04 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	AHCT/VHCT/VT
SN74HCS164BQAR	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	14		RECTANGULAR	UNSPECIFIED	YES	YES	1		CMOS		8	TR	5		50 pF			42 ns	7.8 Amp			125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	62 MHz	R-XQCC-N14	1	6 V				TRUE	2 V	.002 mA		e4	30	260		HC
CD4015BNSRG4	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		CMOS		4		5	5/15		SMALL OUTLINE	SOP16,.3	320 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	8.5 MHz	R-PDSO-G16		18 V	2 mm	5.3 mm	Not Qualified	TRUE	3 V		INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	4000/14000/40000
SN74HCS596QDRQ1	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16		RECTANGULAR	PLASTIC/EPOXY	YES	YES	1		CMOS	AEC-Q100	8	TR	5		50 pF			45 ns	7.8 Amp			125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	75 MHz	R-PDSO-G16	1	6 V				TRUE	2 V	.002 mA		e4	30	260		HC
CD74HCT4094MTE4	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		8		5	5		SMALL OUTLINE	SOP16,.25	43 ns		Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	60 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE	e4	30	260	9.9 mm	HCT
SN74HC595BRWN	Texas Instruments	SERIAL IN PARALLEL OUT
CD74AC164EE4	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	54000000 Hz	CMOS		8		3	3.3/5		IN-LINE	DIP14,.3	157 ns		Shift Registers	2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	75 MHz	R-PDIP-T14		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	1.5 V			e4			19.305 mm	AC
TPIC6B596N	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	10000000 Hz			8	TUBE	5	5	30 pF	IN-LINE	DIP20,.3			Shift Registers	2.54 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	10 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4			25.4 mm	6B
SN74LV164ADGVRG4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	45000000 Hz	CMOS		8		2.5	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	24 ns		Shift Registers	.4 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	105 MHz	R-PDSO-G14	1	5.5 V	1.2 mm	3.6 mm	Not Qualified	TRUE	2 V			e4	30	260	4.4 mm	LV/LV-A/LVX/H
SN74HCS164QBQARQ1	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	14	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1	50 Hz	CMOS	AEC-Q100	8	TR	5		50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC14,.1X.12,20	42 ns	7.8 Amp		.5 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	62 MHz	R-PQCC-N14	1	6 V	.8 mm	2.5 mm		TRUE	2 V	.002 mA		e4	30	260	3 mm	HC
SN74LS673DWR	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		16		5		45 pF	SMALL OUTLINE		40 ns			1.27 mm	70 Cel	RIGHT	3-STATE	NEGATIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G24		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	80 mA	PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER; COMMON SERIAL I/O PIN	e4			15.4 mm	LS
CD74HC595NSRE4	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS		8		5	2/6		SMALL OUTLINE	SOP16,.3	300 ns		Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V			e4	30	260	10.2 mm	HC/UH
TPIC6A596NE	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	10000000 Hz			8	TUBE	5		30 pF	IN-LINE					2.54 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	10 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	5 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4			24.51 mm	6A
SN74164N-10	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5		50 pF	IN-LINE		37 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	36 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	54 mA					19.305 mm	TTL/H/L
SN74LV594ANSRE4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	CMOS		8		2.5	3.3		SMALL OUTLINE	SOP16,.3	18.6 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	115 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	LV/LV-A/LVX/H
SN74164J-00	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		8		5		50 pF	IN-LINE		37 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	36 MHz	R-GDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	54 mA					19.56 mm	TTL/H/L
SN74AHCT595PWR	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	85000000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	11.4 ns	8 Amp	Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	4.5 V	.04 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE	e4	NOT SPECIFIED	260	5 mm	AHCT/VHCT/VT
SN74LS673FN	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL		16		5		45 pF	CHIP CARRIER	LDCC28,.5SQ	40 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		QUAD	20 MHz	S-PQCC-J28		5.25 V	4.57 mm	11.5062 mm	Not Qualified	TRUE	4.75 V	80 mA	PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER; COMMON SERIAL I/O PIN		NOT SPECIFIED	NOT SPECIFIED	11.5062 mm	LS
SN74ALS164D	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5	5	50 pF	SMALL OUTLINE	SOP14,.25	17 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	75 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	24 mA			NOT SPECIFIED	NOT SPECIFIED	8.65 mm	ALS
SN74LS595N	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	1		TTL		8	TUBE	5	5	30 pF	IN-LINE	DIP16,.3	25 ns	24 Amp	Shift Register	2.54 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	65 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4			19.305 mm	LS
SN74LV594ADE4	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1		CMOS		8	TUBE	2.5	3.3	50 pF	SMALL OUTLINE	SOP16,.25	18.6 ns	12 Amp	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V	.02 mA	PARALLEL OUTPUT IS REGISTERED	e4	NOT SPECIFIED	260	9.9 mm	LV/LV-A/LVX/H
SN74AHC595PWLE	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	85000000 Hz	CMOS		8		3.3	2/5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	18.5 ns		Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	115 MHz	R-PDSO-G16		5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED		NOT SPECIFIED	NOT SPECIFIED	5 mm	AHC
CD4015BPWG4	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		CMOS		4		5	5/15		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	320 ns		Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	8.5 MHz	R-PDSO-G16	1	18 V	1.2 mm	4.4 mm	Not Qualified	TRUE	3 V		INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER	e4	30	260	5 mm	4000/14000/40000
SN74LS596NE4	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5	5	30 pF	IN-LINE	DIP16,.3	30 ns		Shift Registers	2.54 mm	70 Cel	RIGHT	OPEN-COLLECTOR	POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	55 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4			19.305 mm	LS
SN74HC164N-00	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		8		5		50 pF	IN-LINE		44 ns			2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDIP-T14		6 V	5.08 mm	7.62 mm	Not Qualified	TRUE	2 V						19.305 mm	HC/UH
SN74AHCT595DBR	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	85000000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	11.4 ns	8 Amp	Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	.04 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE	e4	NOT SPECIFIED	260	6.2 mm	AHCT/VHCT/VT
SN74HCS595QPWRQ1	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1		CMOS	AEC-Q100	8		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		28 ns	7.8 Amp		.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	75 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm		TRUE	2 V	.002 mA		e4	30	260	5 mm	HC
SN74LS596N	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	1		TTL		8	TUBE	5	5	30 pF	IN-LINE	DIP16,.3	30 ns	24 Amp	Shift Registers	2.54 mm	70 Cel	RIGHT	OPEN-COLLECTOR	POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	55 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4			19.305 mm	LS
SN74LS164N3	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5	5	15 pF	IN-LINE	DIP14,.3	32 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	25 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	27 mA	GATED SERIAL INPUTS (A AND B)		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	LS
CD74HCT164ME4	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	18000000 Hz	CMOS		8		5	5		SMALL OUTLINE	SOP14,.25	54 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	18 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V			e4	30	260	8.65 mm	HCT
SN74HCS264DR	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1	50000000 Hz	CMOS		8	TR	5		50 pF	SMALL OUTLINE	SOP14,.25	42 ns	7.8 Amp		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	62 MHz	R-PDSO-G14	1	6 V	1.75 mm	3.9 mm		INVERTED	2 V	.002 mA		e4	30	260	8.65 mm	HC
SN74ALS164ADG4	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	TTL		8		5	5	50 pF	SMALL OUTLINE	SOP14,.25	17 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	50 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	24 mA	AND-GATED SERIAL (A AND B) INPUTS	e4	30	260	8.65 mm	ALS
CD4015BH	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	NO LEAD	16	DIE	RECTANGULAR	UNSPECIFIED		YES	2		CMOS		4		5			UNCASED CHIP		320 ns				125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		UPPER	8.5 MHz	R-XUUC-N16		18 V			Not Qualified	TRUE	3 V		INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER					4000/14000/40000
TPIC6A596DWR	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1				8		5			SMALL OUTLINE				Shift Register	1.27 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	10 MHz	R-PDSO-G24	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4	30	260	15.4 mm	6A
SN74AHCT595DBRE4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	85000000 Hz	CMOS		8		5	5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	11.4 ns		Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE	e4	30	260	6.2 mm	AHCT/VHCT/VT
SN74LV595ADG3	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		8		2.5			SMALL OUTLINE		25.5 ns			1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	45 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V						9.9 mm	LV/LV-A/LVX/H

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.