14 Digital Shift Registers 1,117

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74LS91N1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5	5		IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel	RIGHT			0 Cel		DUAL		R-PDIP-T14					Not Qualified
SN74178NP1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4					IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel	RIGHT			0 Cel		DUAL		R-PDIP-T14					Not Qualified
SN74AS95D3	Texas Instruments		COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	4					SMALL OUTLINE	SOP14,.25			Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL			0 Cel		DUAL		R-PDSO-G14
SN74LS95N	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5	5		IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T14					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74L164J-00	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	8		5		50 pF	IN-LINE		74 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	18 MHz	R-GDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	27 mA					19.56 mm	TTL/H/L
SN74HCS264PWR	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1	50000000 Hz	CMOS	8	TR	5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	42 ns	7.8 Amp		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	62 MHz	R-PDSO-G14	1	6 V	1.2 mm	4.4 mm		INVERTED	2 V	.002 mA		e4	30	260	5 mm	HC
SN74LS164N-10	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5		15 pF	IN-LINE		32 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	36 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	27 mA					19.305 mm	LS
SN74AS95NP1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4					IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL			0 Cel		DUAL		R-PDIP-T14					Not Qualified
CD74HCT164MTG4	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	18000000 Hz	CMOS	8		5	5		SMALL OUTLINE	SOP14,.25	54 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	18 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V			e4	30	260	8.65 mm	HCT
SN74LV164APWLE	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	45000000 Hz	CMOS	8		2.5	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	24 ns		Shift Registers	.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	50 MHz	R-PDSO-G14		5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V				NOT SPECIFIED	NOT SPECIFIED	5 mm	LV/LV-A/LVX/H
SN74AS95J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	4					IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL			0 Cel		DUAL		R-XDIP-T14
SN74LV164PWLE	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	35000000 Hz	CMOS	8		3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	32 ns		Shift Registers	.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G14		5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2.7 V		AND-GATED SERIAL INPUTS (A AND B)		NOT SPECIFIED	NOT SPECIFIED	5 mm	LV/LV-A/LVX/H
CD74AC164M96	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	54000000 Hz	CMOS	8	TR	3	3.3/5	50 pF	SMALL OUTLINE	SOP14,.25	157 ns	24 Amp	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	75 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	1.5 V	.16 mA		e4	NOT SPECIFIED	260	8.65 mm	AC
SN74ALS164J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	8		5	5		IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-XDIP-T14											NOT SPECIFIED	NOT SPECIFIED
SN74LS295BN-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5		45 pF	IN-LINE		30 ns			2.54 mm	70 Cel	RIGHT	3-STATE	NEGATIVE EDGE	0 Cel		DUAL	45 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	29 mA					19.305 mm	LS
SN7491AJ	Texas Instruments	SERIAL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1	10000000 Hz	TTL	8		5	5	15 pF	IN-LINE	DIP14,.3	40 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	10 MHz	R-GDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	58 mA			NOT SPECIFIED	NOT SPECIFIED	19.56 mm	TTL/H/L
SN74HC164DE4	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS	8	TUBE	5	2/6	50 pF	SMALL OUTLINE	SOP14,.25	220 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	28 MHz	R-PDSO-G14	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		AND-GATED SERIAL INPUTS (A AND B)	e4	30	260	8.65 mm	HC/UH
SN7491AJP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	8		5	5		IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel	RIGHT			0 Cel		DUAL		R-XDIP-T14
SN74L95N1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5	5		IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T14					Not Qualified
CD4006BF	Texas Instruments	SERIAL IN SERIAL OUT	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED		NO	4		CMOS	5		5			IN-LINE		400 ns				125 Cel	RIGHT			-55 Cel		DUAL	14 MHz	R-CDIP-T14		18 V			Not Qualified	TRUE	3 V		SHARED CLOCK BETWEEN 4 SHIFT REGISTERS; TWO 4 BIT & TWO 5 BIT SHIFT REGISTERS					4000/14000/40000
SN74LS95BJ-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	4		5		15 pF	IN-LINE		32 ns			2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	36 MHz	R-GDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	21 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD				19.56 mm	LS
SN74178N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4					IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel	RIGHT			0 Cel		DUAL		R-PDIP-T14
SN74LS164JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	8		5	5		IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel	RIGHT			0 Cel		DUAL		R-XDIP-T14
CD74AC164M	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	54000000 Hz	CMOS	8	TUBE	3	3.3/5	50 pF	SMALL OUTLINE	SOP14,.25	157 ns	24 Amp	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	75 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	1.5 V	.16 mA		e4	30	260	8.65 mm	AC
SN74ALS164ANSRE4	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	TTL	8		5	5		SMALL OUTLINE	SOP14,.3	17 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	75 MHz	R-PDSO-G14	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		AND-GATED SERIAL (A AND B) INPUTS	e4	30	260	10.2 mm	ALS
SN74164N3	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5	5	15 pF	IN-LINE	DIP14,.3	32 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	25 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	54 mA			NOT SPECIFIED	NOT SPECIFIED	19.305 mm	TTL/H/L
SN74L95N-10	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5		50 pF	IN-LINE		200 ns			2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	5 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	9 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD				19.305 mm	TTL/H/L
SN74178N-10	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5		15 pF	IN-LINE		35 ns			2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	39 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	75 mA	HOLD MODE				19.305 mm	TTL/H/L
SN74178N	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5		15 pF	IN-LINE	DIP14,.3	35 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	25 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	75 mA	HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	TTL/H/L
SN74HCS164PWR	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1		CMOS	8	TR	5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	42 ns	7.8 Amp		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	62 MHz	R-PDSO-G14	1	6 V	1.2 mm	4.4 mm		TRUE	2 V	.002 mA		e4	30	260	5 mm	HC
SN74LS295BNP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5	5		IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T14
SN74L91N-10	Texas Instruments	SERIAL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5		50 pF	IN-LINE		150 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	6.5 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	6.6 mA					19.305 mm	TTL/H/L
SN74LS164N-00	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5		15 pF	IN-LINE		32 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	36 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	27 mA					19.305 mm	LS
CD74AC164E	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	1	54000000 Hz	CMOS	8	TUBE	3	3.3/5	50 pF	IN-LINE	DIP14,.3	157 ns	24 Amp	Shift Registers	2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	75 MHz	R-PDIP-T14		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	1.5 V	.16 mA		e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	AC
SN74178N1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4					IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel	RIGHT			0 Cel		DUAL		R-PDIP-T14					Not Qualified
SN74LS295AJ	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC		NO	1	20000000 Hz	TTL	4		5	5		IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-XDIP-T14					Not Qualified
SN74ALS164N	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5	5	50 pF	IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL		R-PDIP-T14		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V				NOT SPECIFIED	NOT SPECIFIED	18.9 mm	ALS
SN74L91J	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC		NO	1	3000000 Hz	TTL	8					IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-XDIP-T14					Not Qualified
SN74LS164N1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5	5		IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel	RIGHT			0 Cel		DUAL		R-PDIP-T14					Not Qualified
SN74LS91J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	8		5	5		IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel	RIGHT			0 Cel		DUAL		R-XDIP-T14
SN74LS95BN	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	25000000 Hz	TTL	4		5	5	15 pF	IN-LINE	DIP14,.3	32 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	25 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	21 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	LS
SN74LS91D	Texas Instruments	SERIAL IN SERIAL OUT	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5	5	15 pF	SMALL OUTLINE	SOP14,.25	40 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	10 MHz	R-PDSO-G14		5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V	20 mA			NOT SPECIFIED	NOT SPECIFIED	8.65 mm	LS
SN74LS95BD3	Texas Instruments		COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	4		5	5		SMALL OUTLINE	SOP14,.25			Shift Registers	1.27 mm	70 Cel				0 Cel		DUAL		R-PDSO-G14
CD74HCT164E	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	1	18000000 Hz	CMOS	8	TUBE	5	5	50 pF	IN-LINE	DIP14,.3	54 ns	4 Amp	Shift Registers	2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	18 MHz	R-PDIP-T14		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	.16 mA		e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	HCT
SN74164J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	8		5	5		IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel	RIGHT			0 Cel		DUAL		R-XDIP-T14
SN74ALS164ADRG4	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	TTL	8		5	5	50 pF	SMALL OUTLINE	SOP14,.25	17 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	50 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	24 mA	AND-GATED SERIAL (A AND B) INPUTS	e4	30	260	8.65 mm	ALS
SN7495AN3	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5	5	15 pF	IN-LINE	DIP14,.3	32 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	36 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	63 mA			NOT SPECIFIED	NOT SPECIFIED	19.305 mm	TTL/H/L
SN7495AJ	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1	25000000 Hz	TTL	4		5	5	15 pF	IN-LINE	DIP14,.3	32 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	36 MHz	R-GDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	63 mA	SEPARATE CLOCKS FOR SHIFT RIGHT AND LOAD		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	7495

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.