14 Digital Shift Registers 1,117

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
74HCT164DB-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5		50 pF	SMALL OUTLINE, SHRINK PITCH		54 ns		.65 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	18 MHz	R-PDSO-G14	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		e4			6.2 mm	HCT
74HCT164D-Q100J	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	18000000 Hz	CMOS	AEC-Q100	8	5	5		SMALL OUTLINE	SOP14,.25	54 ns	Shift Registers	1.27 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel		DUAL	18 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V					8.65 mm	HCT
HEF4006BPB	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	4		CMOS		5	5		50 pF	IN-LINE		180 ns		2.54 mm	85 Cel	RIGHT	NEGATIVE EDGE	-40 Cel		DUAL	9 MHz	R-PDIP-T14		15 V	4.2 mm	7.62 mm	Not Qualified	TRUE	3 V	SHARED CLOCK BETWEEN 4 SHIFT REGISTERS; TWO 4 BIT & TWO 5 BIT SHIFT REGISTERS				19.025 mm	4000/14000/40000
74HC164BQ-Q100X	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	14	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	4000000 Hz	CMOS	AEC-Q100	8	5	2/6		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC14,.1X.12,20	255 ns	Shift Registers	.5 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel		QUAD	24 MHz	R-PQCC-N14		6 V	1 mm	2.5 mm	Not Qualified	TRUE	2 V					3 mm	HC/UH
74HCT164DB,112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	18000000 Hz	CMOS		8	5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3	54 ns	Shift Registers	.65 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	18 MHz	R-PDSO-G14	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		e4	30	260	6.2 mm	HCT
74HC164DB,118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		8	5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3	255 ns	Shift Registers	.65 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G14	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		e4	30	260	6.2 mm	HC/UH
74HC164BQ-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	14	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		255 ns		.5 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel		QUAD	24 MHz	R-PQCC-N14		6 V	1 mm	2.5 mm		TRUE	2 V					3 mm	HC/UH
HEF4006BDB	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	4		CMOS		5	5		50 pF	IN-LINE		180 ns		2.54 mm	85 Cel	RIGHT	NEGATIVE EDGE	-40 Cel		DUAL	9 MHz	R-GDIP-T14		15 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V	SHARED CLOCK BETWEEN 4 SHIFT REGISTERS; TWO 4 BIT & TWO 5 BIT SHIFT REGISTERS					4000/14000/40000
74HCT164PW-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		54 ns		.65 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	18 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V		e4		260	5 mm	HCT
74HCT164PW-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		54 ns		.65 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel		DUAL	18 MHz	R-PDSO-G14		5.5 V	1.1 mm	4.4 mm		TRUE	4.5 V					5 mm	HCT
74HC164BQ	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	14	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		255 ns		.5 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	24 MHz	R-PQCC-N14	1	6 V	1 mm	2.5 mm	Not Qualified	TRUE	2 V		e4			3 mm	HC/UH
HEF4731BDF	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	4		CMOS		64	5		50 pF	IN-LINE		230 ns		2.54 mm	85 Cel	RIGHT	NEGATIVE EDGE	-40 Cel		DUAL	2.25 MHz	R-GDIP-T14		15 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V	INDIVIDUAL CLOCK FOR EACH SHIFT REGISTER					4000/14000/40000
74HCT164PW,112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	18000000 Hz	CMOS		8	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	54 ns	Shift Registers	.65 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	18 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V		e4	30	260	5 mm	HCT
74LV164DB,118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	12000000 Hz	CMOS		8	3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3	49 ns	Shift Registers	.65 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	30 MHz	R-PDSO-G14	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	1 V		e4	30	260	6.2 mm	LV/LV-A/LVX/H
74AHCT164D,118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	65000000 Hz	CMOS		8	5	5		SMALL OUTLINE	SOP14,.25	14 ns	Shift Registers	1.27 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	85 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		e4	30	260	8.65 mm	AHCT/VHCT/VT
74HC164N,652	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	24000000 Hz	CMOS		8	5	2/6	50 pF	IN-LINE	DIP14,.3	255 ns	Shift Registers	2.54 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDIP-T14		6 V	4.2 mm	7.62 mm	Not Qualified	TRUE	2 V		e4			19.025 mm	HC/UH
74LV164BQ-Q100X	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	14	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	3.3			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		49 ns		.5 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel		QUAD	30 MHz	R-PQCC-N14		5.5 V	1 mm	2.5 mm		TRUE	1 V					3 mm	LV/LV-A/LVX/H
74HC164PW-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		255 ns		.65 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G14	1	6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V		e4			5 mm	HC/UH
HEF4006BTD	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	4		CMOS		5	5		50 pF	SMALL OUTLINE		180 ns		1.27 mm	85 Cel	RIGHT	NEGATIVE EDGE	-40 Cel		DUAL	9 MHz	R-PDSO-G14		15 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V	SHARED CLOCK BETWEEN 4 SHIFT REGISTERS; TWO 4 BIT & TWO 5 BIT SHIFT REGISTERS				8.65 mm	4000/14000/40000
74LV164D-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	3.3		50 pF	SMALL OUTLINE		49 ns		1.27 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	30 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	1 V		e4			8.65 mm	LV/LV-A/LVX/H
74LV164PW,118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	12000000 Hz	CMOS		8	3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	49 ns	Shift Registers	.65 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	30 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1 V		e4	30	260	5 mm	LV/LV-A/LVX/H
74AHC164PW/T3	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		20.5 ns		.65 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	85 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V		e4			5 mm	AHC/VHC/H/U/V
HEF4731BD	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	4	2250000 Hz	CMOS		64	5	5/15	50 pF	IN-LINE	DIP14,.3	230 ns	Shift Registers	2.54 mm	85 Cel	RIGHT	NEGATIVE EDGE	-40 Cel		DUAL	2.25 MHz	R-GDIP-T14		15 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V	INDIVIDUAL CLOCK FOR EACH SHIFT REGISTER					4000/14000/40000
HEF4006BPN	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	4		CMOS		5	5		50 pF	IN-LINE		180 ns		2.54 mm	85 Cel	RIGHT	NEGATIVE EDGE	-40 Cel		DUAL	9 MHz	R-PDIP-T14		15 V	4.2 mm	7.62 mm	Not Qualified	TRUE	3 V	SHARED CLOCK BETWEEN 4 SHIFT REGISTERS; TWO 4 BIT & TWO 5 BIT SHIFT REGISTERS				19.025 mm	4000/14000/40000
HEF4731BPB	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	4		CMOS		64	5		50 pF	IN-LINE		260 ns		2.54 mm	85 Cel	RIGHT	NEGATIVE EDGE	-40 Cel		DUAL	9 MHz	R-PDIP-T14		15 V	4.2 mm	7.62 mm	Not Qualified	TRUE	3 V	INDIVIDUAL CLOCK FOR EACH SHIFT REGISTER				19.025 mm	4000/14000/40000
74AHC164BQ-G	NXP Semiconductors		AUTOMOTIVE	NO LEAD	14	QCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	65000000 Hz	CMOS		8		2/5.5		CHIP CARRIER	LCC14,.1X.12,20		Shift Registers	.5 mm	125 Cel			-40 Cel		QUAD		R-PQCC-N14					Not Qualified
74AHC164PW,112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	35000000 Hz	CMOS		8	5	2/5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	20.5 ns	Shift Registers	.65 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	85 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V		e4	30	260	5 mm	AHC/VHC/H/U/V
HEF4006BTD-T	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	4		CMOS		5	5		50 pF	SMALL OUTLINE		180 ns		1.27 mm	85 Cel	RIGHT	NEGATIVE EDGE	-40 Cel		DUAL	9 MHz	R-PDSO-G14		15 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V	SHARED CLOCK BETWEEN 4 SHIFT REGISTERS; TWO 4 BIT & TWO 5 BIT SHIFT REGISTERS				8.65 mm	4000/14000/40000
74AHC164PW	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	35000000 Hz	CMOS		8	5	2/5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	20.5 ns	Shift Registers	.65 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	85 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V		e4	30	260	5 mm	AHC/VHC/H/U/V
74AHCT164BQ-Q100X	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	14	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		14 ns		.5 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel		QUAD	85 MHz	R-PQCC-N14		5.5 V	1 mm	2.5 mm		TRUE	4.5 V					3 mm	AHCT/VHCT/VT
74HCT164BQ-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	14	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		54 ns		.5 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel		QUAD	18 MHz	R-PQCC-N14		5.5 V	1 mm	2.5 mm		TRUE	4.5 V					3 mm	HCT
HEF4006BP	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	4	9000000 Hz	CMOS		5	5	5/15	50 pF	IN-LINE	DIP14,.3	180 ns	Shift Registers	2.54 mm	85 Cel	RIGHT	NEGATIVE EDGE	-40 Cel		DUAL	9 MHz	R-PDIP-T14		15 V	4.2 mm	7.62 mm	Not Qualified	TRUE	3 V	SHARED CLOCK BETWEEN 4 SHIFT REGISTERS; TWO 4 BIT & TWO 5 BIT SHIFT REGISTERS				19.025 mm	4000/14000/40000
74AHCT164BQ,115	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	14	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	65000000 Hz	CMOS		8	5	5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC14,.1X.12,20	14 ns	Shift Registers	.5 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	85 MHz	R-PQCC-N14	1	5.5 V	1 mm	2.5 mm	Not Qualified	TRUE	4.5 V		e4	30	260	3 mm	AHCT/VHCT/VT
74AHCT164D-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	65000000 Hz	CMOS		8	5	5		SMALL OUTLINE	SOP14,.25	14 ns	Shift Registers	1.27 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	85 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		e4			8.65 mm	AHCT/VHCT/VT
74HCT164PW-Q100J	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	18000000 Hz	CMOS	AEC-Q100	8	5	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	54 ns	Shift Registers	.65 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel		DUAL	18 MHz	R-PDSO-G14		5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V					5 mm	HCT
74AHC164PW-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		20.5 ns		.65 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel		DUAL	85 MHz	R-PDSO-G14		5.5 V	1.1 mm	4.4 mm		TRUE	2 V					5 mm	AHC/VHC/H/U/V
74AHC164D-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE		20.5 ns		1.27 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel		DUAL	85 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm		TRUE	2 V					8.65 mm	AHC/VHC/H/U/V
HEF4731VP	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	4	2250000 Hz	CMOS		64	5		50 pF	IN-LINE	DIP14,.3	230 ns	Shift Registers	2.54 mm	85 Cel	RIGHT	NEGATIVE EDGE	-40 Cel		DUAL	2.25 MHz	R-PDIP-T14		12.5 V	4.2 mm	7.62 mm	Not Qualified	TRUE	4.5 V	INDIVIDUAL CLOCK FOR EACH SHIFT REGISTER				19.025 mm	4000/14000/40000
74LV164DB-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	3.3		50 pF	SMALL OUTLINE, SHRINK PITCH		49 ns		.65 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	30 MHz	R-PDSO-G14	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	1 V		e4			6.2 mm	LV/LV-A/LVX/H
74AHCT164D-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE		14 ns		1.27 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel		DUAL	85 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm		TRUE	4.5 V					8.65 mm	AHCT/VHCT/VT
HEF4006BD	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	4	9000000 Hz	CMOS		5	5	5/15	50 pF	IN-LINE	DIP14,.3	180 ns	Shift Registers	2.54 mm	85 Cel	RIGHT	NEGATIVE EDGE	-40 Cel		DUAL	9 MHz	R-GDIP-T14		15 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V	SHARED CLOCK BETWEEN 4 SHIFT REGISTERS; TWO 4 BIT & TWO 5 BIT SHIFT REGISTERS					4000/14000/40000
74HC164DB-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5		50 pF	SMALL OUTLINE, SHRINK PITCH		255 ns		.65 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G14	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		e4			6.2 mm	HC/UH
HEF4731VDF	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	4		CMOS		64	5		50 pF	IN-LINE		230 ns		2.54 mm	85 Cel	RIGHT	NEGATIVE EDGE	-40 Cel		DUAL	2.25 MHz	R-GDIP-T14		12.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	INDIVIDUAL CLOCK FOR EACH SHIFT REGISTER					4000/14000/40000
74LV164D-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	3.3			SMALL OUTLINE		49 ns		1.27 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel		DUAL	30 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm		TRUE	1 V					8.65 mm	LV/LV-A/LVX/H
74AHC164D,118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	65000000 Hz	CMOS		8	5	2/5.5		SMALL OUTLINE	SOP14,.25	20.5 ns	Shift Registers	1.27 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	85 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		e4	30	260	8.65 mm	AHC/VHC/H/U/V
74AHC164D-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	65000000 Hz	CMOS		8	5	2/5.5		SMALL OUTLINE	SOP14,.25	20.5 ns	Shift Registers	1.27 mm	125 Cel	RIGHT	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	85 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		e4			8.65 mm	AHC/VHC/H/U/V
HEF4731VD	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	4	2250000 Hz	CMOS		64	5		50 pF	IN-LINE	DIP14,.3	230 ns	Shift Registers	2.54 mm	85 Cel	RIGHT	NEGATIVE EDGE	-40 Cel		DUAL	2.25 MHz	R-GDIP-T14		12.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	INDIVIDUAL CLOCK FOR EACH SHIFT REGISTER					4000/14000/40000
HEF4731VPN	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	4		CMOS		64	5		50 pF	IN-LINE		230 ns		2.54 mm	85 Cel	RIGHT	NEGATIVE EDGE	-40 Cel		DUAL	2.25 MHz	R-PDIP-T14		12.5 V	4.2 mm	7.62 mm	Not Qualified	TRUE	4.5 V	INDIVIDUAL CLOCK FOR EACH SHIFT REGISTER				19.025 mm	4000/14000/40000

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.