SOP Digital Shift Registers 1,958

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74HC595DWR-00	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		8		5		50 pF	SMALL OUTLINE		40 ns			1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDSO-G16		6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED				10.3 mm	HC/UH
SN74ALS299DW	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	30000000 Hz	TTL		8	TUBE	5	5	50 pF	SMALL OUTLINE	SOP20,.4	19 ns	24 Amp	Shift Register	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	30 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	38 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e4	30	260	12.8 mm	ALS
TPIC6A595DWR	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1				8	TR	5		30 pF	SMALL OUTLINE		125 ns			1.27 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G24	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	5 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4	30	260	15.4 mm	6A
SN74HCS264QDRQ1	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1		CMOS	AEC-Q100	8	TR	5		50 pF	SMALL OUTLINE	SOP14,.25	42 ns	7.8 Amp		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	62 MHz	R-PDSO-G14	1	6 V	1.75 mm	3.9 mm		INVERTED	2 V	.002 mA		e4	30	260	8.65 mm	HC
CD74AC323M	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	68000000 Hz	CMOS		8	TUBE	3.3	3.3/5	50 pF	SMALL OUTLINE	SOP20,.4	169 ns	24 Amp	Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	95 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	1.5 V	.16 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e4	30	260	12.8 mm	AC
SN74HC595QDRQ1	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	21000000 Hz	CMOS	AEC-Q100	8	TR	5		50 pF	SMALL OUTLINE	SOP16,.25	240 ns	7.8 Amp		1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm		TRUE	2 V	.08 mA		e4	30	260	9.9 mm	HC/UH
SN74LS594D	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5			SMALL OUTLINE		30 ns			1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	20 MHz	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V						9.9 mm	LS
SN74HC194DW-00R	Texas Instruments	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		4		5		50 pF	SMALL OUTLINE		180 ns			1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel		DUAL	36 MHz	R-PDSO-G16		6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V						10.3 mm	HC/UH
SN74LV166ADRG4	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	35000000 Hz	CMOS		8		2.5	3.3		SMALL OUTLINE	SOP16,.25	26 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		SISO OPERATION ALSO AVAILABLE	e4	30	260	9.9 mm	LV/LV-A/LVX/H
SN74LV165ANSRG4	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	CMOS		8		2.5	3.3		SMALL OUTLINE	SOP16,.3	26 ns		Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	45 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V		SISO OPERATION ALSO AVAILABLE	e4	30	260	10.2 mm	LV/LV-A/LVX/H
CD74HC4094NSRG4	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		8		4.5	2/6		SMALL OUTLINE	SOP16,.3	295 ns		Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE	e4	30	260	10.2 mm	HC/UH
SN74AHCT595NSRG4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	85000000 Hz	CMOS		8		5	5		SMALL OUTLINE	SOP16,.3	11.4 ns		Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	115 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	AHCT/VHCT/VT
SN74AHCT595D	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	85000000 Hz	CMOS		8	TUBE	5	5	50 pF	SMALL OUTLINE	SOP16,.25	11.4 ns	8 Amp	Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	.04 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE	e4	30	260	9.9 mm	AHCT/VHCT/VT
SN74ALS164D3	Texas Instruments		COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5	5		SMALL OUTLINE	SOP14,.25			Shift Registers	1.27 mm	70 Cel				0 Cel		DUAL		R-PDSO-G14											NOT SPECIFIED	NOT SPECIFIED
SN74ALS323DW3	Texas Instruments		COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5	5		SMALL OUTLINE	SOP20,.4			Shift Registers	1.27 mm	70 Cel				0 Cel		DUAL		R-PDSO-G20
TPIC6A596DWG4	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	10000000 Hz			8	TUBE	5		30 pF	SMALL OUTLINE				Shift Register	1.27 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	10 MHz	R-PDSO-G24	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	5 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4	30	260	15.4 mm	6A
CD74HC194MTG4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		4		4.5	2/6		SMALL OUTLINE	SOP16,.25	265 ns		Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		HOLD MODE	e4	30	260	9.9 mm	HC/UH
SN74ALS323DWRE4	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5	5	50 pF	SMALL OUTLINE	SOP20,.4	19 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	17 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	38 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	ALS
SN74LS673DW	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	20000000 Hz	TTL		8	TUBE	5		45 pF	SMALL OUTLINE	SOP24,.4	40 ns	24 Amp	Shift Registers	1.27 mm	70 Cel	RIGHT	3-STATE	NEGATIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDSO-G24	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	80 mA	PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER; COMMON SERIAL I/O PIN	e4	30	260	15.4 mm	LS
SN74LS671DW3	Texas Instruments		COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		4					SMALL OUTLINE	SOP20,.4			Shift Registers	1.27 mm	70 Cel				0 Cel		DUAL		R-PDSO-G20											NOT SPECIFIED	NOT SPECIFIED
SN74LS195AD3	Texas Instruments		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		4		5	5		SMALL OUTLINE	SOP16,.25			Shift Registers	1.27 mm	70 Cel				0 Cel		DUAL		R-PDSO-G16
SN74AS323DWP3	Texas Instruments		COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8					SMALL OUTLINE	SOP20,.4			Shift Registers	1.27 mm	70 Cel				0 Cel		DUAL		R-PDSO-G20											NOT SPECIFIED	NOT SPECIFIED
TPIC6A595DWRG4	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1				8	TR	5		30 pF	SMALL OUTLINE					1.27 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G24	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	5 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4	30	260	15.4 mm	6A
SN74LS395AD	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		4		5	5	45 pF	SMALL OUTLINE	SOP16,.25	30 ns		Shift Registers	1.27 mm	70 Cel	RIGHT	3-STATE	NEGATIVE EDGE	0 Cel		DUAL	30 MHz	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	31 mA	TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	LS
SN74LV166AD	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	35000000 Hz	CMOS		8	TUBE	2.5	3.3	50 pF	SMALL OUTLINE	SOP16,.25	26 ns	12 Amp	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V	.02 mA	SISO OPERATION ALSO AVAILABLE	e4	NOT SPECIFIED	260	9.9 mm	LV/LV-A/LVX/H
SN74HC166D3	Texas Instruments		INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		8			2/6		SMALL OUTLINE	SOP16,.25			Shift Registers	1.27 mm	85 Cel				-40 Cel		DUAL		R-PDSO-G16											NOT SPECIFIED	NOT SPECIFIED
CD74HC4094NSRE4	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	4000000 Hz	CMOS		8	TR	6	2/6	50 pF	SMALL OUTLINE	SOP16,.3	295 ns	5.2 Amp	Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V	.16 mA	PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE	e4	30	260	10.3 mm	HC
SN74ALS299DWRE4	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5	5	50 pF	SMALL OUTLINE	SOP20,.4	19 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	30 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	38 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	ALS
SN74F299DWG4	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	70000000 Hz	TTL		8		5	5	50 pF	SMALL OUTLINE	SOP20,.4	12 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	70 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	95 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e4	30	260	12.8 mm	F/FAST
SN74LV166ADG4	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	35000000 Hz	CMOS		8	TUBE	2.5	3.3	50 pF	SMALL OUTLINE	SOP16,.25	26 ns	12 Amp	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V	.02 mA	SISO OPERATION ALSO AVAILABLE	e4	NOT SPECIFIED	260	9.9 mm	LV/LV-A/LVX/H
CD74HCT299MG4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	16000000 Hz	CMOS		8		5	2/6		SMALL OUTLINE	SOP20,.4	68 ns		Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	16 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V		COMMON I/O PINS; GATED OUTPUT CONTROL	e4	30	260	12.8 mm	HCT
SN74LS96D	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		5		5	5	15 pF	SMALL OUTLINE	SOP16,.25	40 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	25 MHz	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	20 mA	CLEAR FOLLOWED BY SELECTIVE PRESET IMITATES LOAD		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	LS
SN74ALS323DWG4	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	17000000 Hz	TTL		8		5	5		SMALL OUTLINE	SOP20,.4	19 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	17 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V		HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	ALS
SN74HC166DTG4	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS		8		5	2/6		SMALL OUTLINE	SOP16,.25	190 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		SISO OPERATION ALSO AVAILABLE	e4	40	260	9.9 mm	HC/UH
SN74ALS166DRE4	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5		50 pF	SMALL OUTLINE	SOP16,.25	13 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	45 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	24 mA	SISO OPERATION ALSO AVAILABLE	e4	30	260	9.9 mm	ALS
SN74LS195ADR	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	30000000 Hz	TTL		4		5	5	15 pF	SMALL OUTLINE	SOP16,.25	26 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	30 MHz	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	21 mA	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	LS
SN74HC164DTG4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	5000000 Hz	CMOS		8		5	2/6		SMALL OUTLINE	SOP14,.25	220 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	28 MHz	R-PDSO-G14	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		AND-GATED SERIAL INPUTS (A AND B)	e4	30	260	8.65 mm	HC/UH
SN74LS165ADE4	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	TTL		8		5	5	15 pF	SMALL OUTLINE	SOP16,.25	25 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V	30 mA	SISO OPERATION ALSO AVAILABLE	e4	30	260	9.9 mm	LS
CD4015BMG4	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		CMOS		4		5	5/15		SMALL OUTLINE	SOP16,.25	320 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	8.5 MHz	R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V		INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER	e4	30	260	9.9 mm	4000/14000/40000
CD74HC194NSR	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		4		4.5	2/6		SMALL OUTLINE	SOP16,.3	265 ns		Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	23 MHz	R-PDSO-G16		6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	HC/UH
SN74LS322ADW	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	TTL		8		5	5	15 pF	SMALL OUTLINE	SOP20,.4	35 ns		Shift Registers	1.27 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE	0 Cel		DUAL	35 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	60 mA	COMMON I/O PINS; SIGN EXTEND FUNCTION; TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	LS
CD4014BNSR	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	3000000 Hz	CMOS		8		5	5/15		SMALL OUTLINE	SOP16,.3	320 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	8.5 MHz	R-PDSO-G16		18 V	2 mm	5.3 mm	Not Qualified	TRUE	3 V		OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER; ALSO OPERATES AS SISO		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	4000/14000/40000
CD74HC164ME4	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	20000000 Hz	CMOS		8	TUBE	4.5	2/6	50 pF	SMALL OUTLINE	SOP14,.25	255 ns	5.2 Amp	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G14	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V	.16 mA		e4	NOT SPECIFIED	260	8.65 mm	HC/UH
TPIC6A595DW	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1				8	TUBE	5		30 pF	SMALL OUTLINE		125 ns			1.27 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G24	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	5 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4	30	260	15.4 mm	6A
SN74S195D	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	70000000 Hz	TTL		4		5	5	15 pF	SMALL OUTLINE	SOP16,.25	16.5 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	70 MHz	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	109 mA	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	S
SN74AHC165DR	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		8					SMALL OUTLINE					1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V						9.9 mm	AHC
SN74HC595DR-00	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		8		5		50 pF	SMALL OUTLINE		40 ns			1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDSO-G16		6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT				9.9 mm	HC/UH
CD74HC194M96G4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		4		4.5	2/6		SMALL OUTLINE	SOP16,.25	265 ns		Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		HOLD MODE	e4	30	260	9.9 mm	HC/UH

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.