SQUARE Digital Shift Registers 625

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
MC10EP142FAR2	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	9	3.3	+-3.3/+-5		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.8 ns	Shift Registers	.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	3000 MHz	S-PQFP-G32		5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE	e0		235	7 mm	10E
MC100E141FNG	Onsemi	PARALLEL IN PARALLEL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	700000000 Hz	ECL	8	5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.975 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE	e3		260	11.505 mm	100E
MC10EP445MNG	Onsemi	SERIAL IN PARALLEL OUT	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1		ECL	8	3.3			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.795 ns		.5 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN	QUAD	2800 MHz	S-PQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	5 mm	10E
MC100E241FNR2	Onsemi	PARALLEL IN PARALLEL OUT	MILITARY	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	700000000 Hz	ECL	8	5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.975 ns	Shift Registers	1.27 mm	125 Cel	RIGHT	OPEN-EMITTER	POSITIVE EDGE	-55 Cel	TIN LEAD	QUAD	700 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE	e0		235	11.505 mm	100E
MC10EP142FAG	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	9	3.3	+-3.3/+-5		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.8 ns	Shift Registers	.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN	QUAD	3000 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE	e3		260	7 mm	10E
MC100E142FN	Onsemi	PARALLEL IN PARALLEL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	700000000 Hz	ECL	9	5	-4.5		CHIP CARRIER	LDCC28,.5SQ	1 ns	Shift Registers	1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	700 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE	e0		235	11.505 mm	100E
MC10EP142MNR4G	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	9	3.3	+-3.3/+-5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.8 ns	Shift Registers	.5 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN	QUAD		S-PQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE	e3	30	260	5 mm	10E
MC100E142FNG	Onsemi	PARALLEL IN PARALLEL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	700000000 Hz	ECL	9	5	-4.5		CHIP CARRIER	LDCC28,.5SQ	1 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE	e3		260	11.505 mm	100E
T74LS95BC1	STMicroelectronics	PARALLEL IN PARALLEL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	4	5		15 pF	CHIP CARRIER		32 ns		1.27 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		QUAD	25 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	21 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD				8.9662 mm	LS
T74LS299C1	STMicroelectronics		COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	4	25000000 Hz		8	5	5		CHIP CARRIER	LDCC20,.4SQ		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL			0 Cel		QUAD		S-PQCC-J20					Not Qualified
T74LS166C1	STMicroelectronics	PARALLEL IN SERIAL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	25000000 Hz	TTL	8	5	5	15 pF	CHIP CARRIER	LDCC20,.4SQ	35 ns	Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	25 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	38 mA	CLOCK INHIBIT	e0			8.9662 mm	LS
T74LS195AC1	STMicroelectronics	PARALLEL IN PARALLEL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	4	5		15 pF	CHIP CARRIER		26 ns		1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		QUAD	30 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	21 mA	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT				8.9662 mm	LS
T74LS91C1	STMicroelectronics	SERIAL IN SERIAL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	8	5			CHIP CARRIER		40 ns		1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		QUAD	18 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.75 V						8.9662 mm	LS
T74LS395AC1	STMicroelectronics	PARALLEL IN PARALLEL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	4	5		45 pF	CHIP CARRIER		30 ns		1.27 mm	70 Cel	RIGHT	3-STATE	NEGATIVE EDGE	0 Cel		QUAD	30 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	34 mA	TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT				8.9662 mm	LS
T74LS398C1	STMicroelectronics		COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	4		TTL	4	5	5		CHIP CARRIER	LDCC20,.4SQ		Shift Registers	1.27 mm	70 Cel	RIGHT			0 Cel		QUAD		S-PQCC-J20					Not Qualified
T74LS295AC1	STMicroelectronics	PARALLEL IN PARALLEL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	4	5		15 pF	CHIP CARRIER		26 ns		1.27 mm	70 Cel	RIGHT	3-STATE	NEGATIVE EDGE	0 Cel		QUAD	30 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	25 mA					8.9662 mm	LS
T74LS164C1	STMicroelectronics	SERIAL IN PARALLEL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	8	5		15 pF	CHIP CARRIER		32 ns		1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		QUAD	25 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	27 mA					8.9662 mm	LS
M74HC299C1	STMicroelectronics	PARALLEL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	16000000 Hz	CMOS	8	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	59 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	16 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V		HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e0			8.9662 mm	HC/UH
M74HC166C1	STMicroelectronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS	8	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	38 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	24 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V		CLOCK INHIBIT	e0			8.9662 mm	HC/UH
HCF4014BC1	STMicroelectronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		CMOS	8	5	3/15	50 pF	CHIP CARRIER	LDCC20,.4SQ	320 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Matte Tin (Sn)	QUAD	3 MHz	S-PQCC-J20		15 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	3 V		OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER	e3			8.9662 mm	4000/14000/40000
HCF40100BC1	STMicroelectronics	SERIAL IN SERIAL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		CMOS	32	5	3/15	50 pF	CHIP CARRIER	LDCC20,.4SQ	720 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	1 MHz	S-PQCC-J20		15 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	3 V		WRAP AROUND; CLOCK INHIBIT; OUTPUT CHANGES WITH THE FALLING EDGE OF SHIFT CLOCK	e3			8.9662 mm	4000/14000/40000
HCF4006BC1	STMicroelectronics	SERIAL IN SERIAL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	4		CMOS	5	5	3/15	50 pF	CHIP CARRIER	LDCC20,.4SQ		Shift Registers	1.27 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	MATTE TIN	QUAD		S-PQCC-J20		15 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	3 V		SHARED CLOCK BETWEEN 4 SHIFT REGISTERS; TWO 4 BIT & TWO 5 BIT SHIFT REGISTERS	e3			8.9662 mm	4000/14000/40000
M74HC195C1	STMicroelectronics	PARALLEL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	26000000 Hz	CMOS	4	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	36 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	26 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V		COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT	e0			8.9662 mm	HC/UH
M74HC323C1R	STMicroelectronics	PARALLEL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS	8	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	43 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	24 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V		HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e3			8.9662 mm	HC/UH
M74HC166C1R	STMicroelectronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	25000000 Hz	CMOS	8	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	38 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	25 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V		CLOCK INHIBIT	e3			8.9662 mm	HC/UH
M74HC597C1R	STMicroelectronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS	8	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	36 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	24 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V			e3			8.9662 mm	HC/UH
M74HC595C1	STMicroelectronics	SERIAL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	25000000 Hz	CMOS	8	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	40 ns	Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	25 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e0			8.9662 mm	HC/UH
M74HC595C1R	STMicroelectronics	SERIAL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS	8	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	31 ns	Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	24 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e3			8.9662 mm	HC/UH
M74HC165C1	STMicroelectronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS	8	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	48 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	20 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	2 V		CLOCK INHIBIT	e0			8.9662 mm	HC/UH
M74HCT165C1R	STMicroelectronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS	8	5	5	50 pF	CHIP CARRIER	LDCC20,.4SQ	46 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	24 MHz	S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.5 V		CLOCK INHIBIT	e3			8.9662 mm	HCT
M74HC194C1	STMicroelectronics	PARALLEL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS	4	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	33 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	24 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V		HOLD MODE	e0			8.9662 mm	HC/UH
HCF4021BC1	STMicroelectronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		CMOS	8	5	3/15	50 pF	CHIP CARRIER	LDCC20,.4SQ	320 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Matte Tin (Sn)	QUAD	3 MHz	S-PQCC-J20		15 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	3 V		OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER	e3			8.9662 mm	4000/14000/40000
M74HC194C1R	STMicroelectronics	PARALLEL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	25000000 Hz	CMOS	4	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	29 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	25 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V		HOLD MODE	e3			8.9662 mm	HC/UH
M74HCT164C1R	STMicroelectronics	SERIAL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS	8	5	5	50 pF	CHIP CARRIER	LDCC20,.4SQ	45 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	24 MHz	S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.5 V			e3			8.9662 mm	HCT
M74HC4094C1	STMicroelectronics	SERIAL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	16000000 Hz	CMOS	8	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	68 ns	Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	16 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS LATCHED; UNLATCHED SERIAL SHIFT RIGHT OUTPUT	e0			8.9662 mm	HC/UH
M74HC299C1R	STMicroelectronics	PARALLEL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS	8	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	43 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	24 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V		HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e3			8.9662 mm	HC/UH
HCF4035BC1	STMicroelectronics	PARALLEL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	2000000 Hz	CMOS	4	5	3/15	50 pF	CHIP CARRIER	LDCC20,.4SQ	500 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	2 MHz	S-PQCC-J20		15 V	4.57 mm	8.9662 mm	Not Qualified	CONFIGURABLE	3 V		J AND KBAR SERIAL INPUT	e3			8.9662 mm	4000/14000/40000
M74HC195C1R	STMicroelectronics	PARALLEL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	30000000 Hz	CMOS	4	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	31 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	30 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V		COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT	e3			8.9662 mm	HC/UH
HCF40194BC1	STMicroelectronics	PARALLEL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	3000000 Hz	CMOS	4	5	3/15	50 pF	CHIP CARRIER	LDCC20,.4SQ	440 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	3 MHz	S-PQCC-J20		15 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	3 V		HOLD MODE	e3			8.9662 mm	4000/14000/40000
HCF4094BC1	STMicroelectronics	SERIAL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1250000 Hz	CMOS	8	5	3/15	50 pF	CHIP CARRIER	LDCC20,.4SQ	840 ns	Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	1.25 MHz	S-PQCC-J20		15 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	3 V		PARALLEL OUTPUT IS LATCHED; UNLATCHED SERIAL SHIFT RIGHT OUTPUT	e3			8.9662 mm	4000/14000/40000
M74HC164C1R	STMicroelectronics	SERIAL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	25000000 Hz	CMOS	8	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	40 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	25 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V			e3			8.9662 mm	HC/UH
HCF4031BC1	STMicroelectronics	SERIAL IN SERIAL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	2000000 Hz	CMOS	64	5	3/15	50 pF	CHIP CARRIER	LDCC20,.4SQ	500 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	2 MHz	S-PQCC-J20		15 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	3 V		DELAYED BUFFERED CLOCK OUTPUT FOR CASCADING	e3			8.9662 mm	4000/14000/40000
M74HC165C1R	STMicroelectronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	30000000 Hz	CMOS	8	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	38 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	30 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	2 V		CLOCK INHIBIT	e0			8.9662 mm	HC/UH
M74HC597C1	STMicroelectronics	PARALLEL IN SERIAL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS	8	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	36 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	24 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V			e0			8.9662 mm	HC/UH
HCF40104BC1	STMicroelectronics	PARALLEL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	3000000 Hz	CMOS	4	5	3/15	50 pF	CHIP CARRIER	LDCC20,.4SQ	440 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	3 MHz	S-PQCC-J20		15 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	3 V			e3			8.9662 mm	4000/14000/40000
HCF4015BC1	STMicroelectronics	SERIAL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2	3000000 Hz	CMOS	4	5	3/15	50 pF	CHIP CARRIER	LDCC20,.4SQ	320 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	3 MHz	S-PQCC-J20		15 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	3 V		INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER	e3			8.9662 mm	4000/14000/40000
M74HC164C1	STMicroelectronics	SERIAL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	22000000 Hz	CMOS	8	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	44 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	22 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V			e0			8.9662 mm	HC/UH
M74HC4094C1R	STMicroelectronics	SERIAL IN PARALLEL OUT	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS	8	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	50 ns	Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	24 MHz	S-PQCC-J20		6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS LATCHED; UNLATCHED SERIAL SHIFT RIGHT OUTPUT	e3			8.9662 mm	HC/UH

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.