COMMERCIAL Digital Shift Registers 1,172

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74194J-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	4		5		15 pF	IN-LINE		26 ns			2.54 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE		DUAL	36 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	63 mA	HOLD MODE				19.56 mm	TTL/H/L
SN74LS166ADG4	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	TTL	8		5	5	15 pF	SMALL OUTLINE	SOP16,.25	25 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	32 mA	CLOCK INHIBIT	e4	30	260	9.9 mm	LS
SN74179N	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5	5	15 pF	IN-LINE	DIP16,.3	35 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE		DUAL	25 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	75 mA	HOLD MODE; COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	TTL/H/L
SN74AS395FN-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL	4		5			CHIP CARRIER					1.27 mm	70 Cel	RIGHT	3-STATE	NEGATIVE EDGE		QUAD		S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.5 V		TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT				8.9662 mm	AS
SN74LS673DW3	Texas Instruments		COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	16					SMALL OUTLINE	SOP24,.4			Shift Registers	1.27 mm	70 Cel					DUAL		R-PDSO-G24											NOT SPECIFIED	NOT SPECIFIED
SN74AS95FN-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL	4		5			CHIP CARRIER					1.27 mm	70 Cel	RIGHT		NEGATIVE EDGE		QUAD		S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.5 V		SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD				8.9662 mm	AS
SN74LS166N-00	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5		15 pF	IN-LINE		35 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE		DUAL	35 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	38 mA	CLOCK INHIBIT				19.305 mm	LS
SN74F166AD	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	110000000 Hz	TTL	8		5	5	50 pF	SMALL OUTLINE	SOP16,.25	8 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE		DUAL	110 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	70 mA	CLOCK INHIBIT		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	F/FAST
SN74LS673NE4	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	16		5		45 pF	IN-LINE	DIP24,.6	40 ns		Shift Registers	2.54 mm	70 Cel	RIGHT	3-STATE	NEGATIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDIP-T24		5.25 V	5.08 mm	15.24 mm	Not Qualified	TRUE	4.75 V	80 mA	PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER; COMMON SERIAL I/O PIN	e4			31.75 mm	LS
SN74ALS964DWR	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5		50 pF	SMALL OUTLINE					1.27 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE		DUAL	30 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED; DUAL RANK SHIFT REGISTER				12.8 mm	ALS
SN74194NP1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL				DUAL		R-PDIP-T16					Not Qualified
SN74ALS166NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-PDIP-T16											NOT SPECIFIED	NOT SPECIFIED
SN74AS195N1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-PDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74ALS964DWP3	Texas Instruments		COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8					SMALL OUTLINE	SOP20,.4			Shift Registers	1.27 mm	70 Cel					DUAL		R-PDSO-G20
SN74166N-10	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5		15 pF	IN-LINE		30 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE		DUAL	35 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	127 mA	CLOCK INHIBIT				19.305 mm	TTL/H/L
SN74LS589D	Texas Instruments		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8					SMALL OUTLINE	SOP16,.25			Shift Registers	1.27 mm	70 Cel					DUAL		R-PDSO-G16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74S195N3	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5	5		IN-LINE	DIP16,.3	16.5 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE		DUAL	70 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V		COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND K(BAR) SERIAL INPUT		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	S
SN74ALS323NSR	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	17000000 Hz	TTL	8		5	5		SMALL OUTLINE	SOP20,.3	19 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE		DUAL	17 MHz	R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		COMMON I/O PINS; GATED OUTPUT ENABLE INPUT		NOT SPECIFIED	NOT SPECIFIED	12.6 mm	ALS
SN74S299FN3	Texas Instruments		COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL	8		5	5		CHIP CARRIER	LDCC20,.4SQ			Shift Registers	1.27 mm	70 Cel					QUAD		S-PQCC-J20											NOT SPECIFIED	NOT SPECIFIED
SN74LS672N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4					IN-LINE	DIP20,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-PDIP-T20											NOT SPECIFIED	NOT SPECIFIED
SN74S299DW3	Texas Instruments		COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5	5		SMALL OUTLINE	SOP20,.4			Shift Registers	1.27 mm	70 Cel					DUAL		R-PDSO-G20											NOT SPECIFIED	NOT SPECIFIED
SN74LS295AN	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	20000000 Hz	TTL	4		5	5		IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-PDIP-T14					Not Qualified
SN74LS322N	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	35000000 Hz	TTL	8		5	5		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-PDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74F299DW	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	70000000 Hz	TTL	8	TUBE	5	5	50 pF	SMALL OUTLINE	SOP20,.4	12 ns	24 Amp	Shift Register	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	70 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	95 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e4	30	260	12.8 mm	F/FAST
SN74LS91J-00	Texas Instruments	SERIAL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	8		5		15 pF	IN-LINE		40 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE		DUAL	18 MHz	R-GDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	20 mA					19.56 mm	LS
SN74ALS323DWE4	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5	5	50 pF	SMALL OUTLINE	SOP20,.4	19 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE		DUAL	17 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	38 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	ALS
SN74LS96N	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	10000000 Hz	TTL	5		5	5	15 pF	IN-LINE	DIP16,.3	40 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE		DUAL	25 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	20 mA	CLEAR FOLLOWED BY SELECTIVE PRESET IMITATES LOAD		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	LS
SN74198NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8					IN-LINE	DIP24,.6			Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL				DUAL		R-PDIP-T24
SN74ALS299DWG4	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5	5	50 pF	SMALL OUTLINE	SOP20,.4	19 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	30 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	38 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e4	30	260	12.8 mm	ALS
SN74AS395NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-PDIP-T16											NOT SPECIFIED	NOT SPECIFIED
SN74L95J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	4		5	5		IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-XDIP-T14
SN74165J	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	8		5	5	15 pF	IN-LINE	DIP16,.3	31 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE		DUAL	20 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	63 mA	CLOCK INHIBIT		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	TTL/H/L
SN74LS165JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	8		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-XDIP-T16
SN74LS165ADRG4	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	TTL	8		5	5		SMALL OUTLINE	SOP16,.25	25 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V		SISO OPERATION ALSO AVAILABLE	e4	30	260	9.9 mm	LS
SN74LS671NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4					IN-LINE	DIP20,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-PDIP-T20											NOT SPECIFIED	NOT SPECIFIED
SN74LS95BFN3	Texas Instruments		COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL	4		5	5		CHIP CARRIER	LDCC20,.4SQ			Shift Registers	1.27 mm	70 Cel					QUAD		S-PQCC-J20
SN74LS299J	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	8		5	5	15 pF	IN-LINE	DIP20,.3	39 ns		Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE		DUAL	20 MHz	R-GDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	53 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	24.195 mm	LS
SN74S299N	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	50000000 Hz	TTL	8		5	5	45 pF	IN-LINE	DIP20,.3	21 ns		Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE		DUAL	50 MHz	R-PDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	225 mA	HOLD MODE; COMMON I/O PINS		NOT SPECIFIED	NOT SPECIFIED	25.4 mm	S
SN74ALS323DWRG4	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	17000000 Hz	TTL	8		5	5		SMALL OUTLINE	SOP20,.4	19 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE		DUAL	17 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V		HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	ALS
SN74AS395FN	Texas Instruments		COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL	4					CHIP CARRIER	LDCC20,.4SQ			Shift Registers	1.27 mm	70 Cel					QUAD		S-PQCC-J20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74F323DW	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	70000000 Hz	TTL	8		5	5	50 pF	SMALL OUTLINE	SOP20,.4	12 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE		DUAL	70 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	95 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	F/FAST
SN74ALS299J	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	8		5	5		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-XDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74L164N-00	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5		50 pF	IN-LINE		74 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE		DUAL	18 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	27 mA					19.305 mm	TTL/H/L
SN74LS166AN1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-PDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74LS597J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	8					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-XDIP-T16											NOT SPECIFIED	NOT SPECIFIED
SN74LS299NP1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5	5		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-PDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74LS164DE4	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	TTL	8		5	5	15 pF	SMALL OUTLINE	SOP14,.25	32 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDSO-G14	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	27 mA	GATED SERIAL INPUTS (A AND B)	e4	30	260	8.65 mm	LS
SN74ALS166JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	8					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel					DUAL		R-XDIP-T16											NOT SPECIFIED	NOT SPECIFIED

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.