INDUSTRIAL Digital Shift Registers 1,482

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74AHCT595PWRG4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	85000000 Hz	CMOS	8		5	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	11.4 ns		Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE	e4	30	260	5 mm	AHCT/VHCT/VT
SN74LV594ANSRG4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	CMOS	8		2.5	3.3		SMALL OUTLINE	SOP16,.3	18.6 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	115 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V				NOT SPECIFIED	NOT SPECIFIED	10.2 mm	LV/LV-A/LVX/H
SN74LV594ADB	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	8		2.5			SMALL OUTLINE, SHRINK PITCH		18.6 ns			.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V			e4			6.2 mm	LV/LV-A/LVX/H
SN74LV165APWLE	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	CMOS	8		2.5	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	26 ns		Shift Registers	.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G16		5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V		CLOCK INHIBIT		NOT SPECIFIED	NOT SPECIFIED	5 mm	LV/LV-A/LVX/H
SN74AHCT595DBLE	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	85000000 Hz	CMOS	8		5	5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	11.4 ns		Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	115 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED		NOT SPECIFIED	NOT SPECIFIED	6.2 mm	AHCT/VHCT
SN74HC165N-10	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS	8		5		50 pF	IN-LINE		38 ns			2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V		CLOCK INHIBIT				19.305 mm	HC/UH
MM74HC299N/A+	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS	8			2/6		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T20										e0
SN74HC673NT	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS	16					IN-LINE	DIP24,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-PDIP-T24					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74AHC165DBLE	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	8					SMALL OUTLINE, SHRINK PITCH					.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V						6.2 mm	AHC
SN74HC595DW3	Texas Instruments		INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	8			2/6		SMALL OUTLINE	SOP16,.4			Shift Registers	1.27 mm	85 Cel				-40 Cel		DUAL		R-PDSO-G16											NOT SPECIFIED	NOT SPECIFIED
SN74HC322NP1	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS	8			2/6		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-PDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74LV166ADBE4	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	8		2.5			SMALL OUTLINE, SHRINK PITCH		26 ns			.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		SISO OPERATION ALSO AVAILABLE	e4			6.2 mm	LV/LV-A/LVX/H
SN74HC166AIPWREP	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS	8		5	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	190 ns		Shift Registers	.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	29 MHz	R-PDSO-G16		6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		SISO OPERATION ALSO AVAILABLE				5 mm	HC/UH
SN74LV166ADRE4	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	35000000 Hz	CMOS	8		2.5	3.3		SMALL OUTLINE	SOP16,.25	26 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		SISO OPERATION ALSO AVAILABLE	e4	30	260	9.9 mm	LV/LV-A/LVX/H
CD74ACT323M	Texas Instruments	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	90000000 Hz	CMOS	8		5	5		SMALL OUTLINE	SOP20,.4	11.7 ns		Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	103 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V		HOLD MODE; COMMON I/O PINS; GATED OUTPUT CONTROL				12.8 mm	ACT
SN74LV166ANSR	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	35000000 Hz	CMOS	8	TR	2.5	3.3	50 pF	SMALL OUTLINE	SOP16,.3	26 ns	12 Amp	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V	.02 mA	SISO OPERATION ALSO AVAILABLE	e4	NOT SPECIFIED	260	10.2 mm	LV/LV-A/LVX/H
SN74LV165DBR	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	8		3.3			SMALL OUTLINE, SHRINK PITCH		47 ns			.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	50 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2.7 V						6.2 mm	LV/LV-A/LVX/H
SN74HC166J	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		CMOS	8			2/6		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-XDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74AHCT594DRG4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	95000000 Hz	CMOS	8		5	5		SMALL OUTLINE	SOP16,.25	10.1 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED	e4	30	260	9.9 mm	AHCT/VHCT/VT
SN74AHC165D	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	8					SMALL OUTLINE					1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V						9.9 mm	AHC
SN74LV166ANSRG4	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	35000000 Hz	CMOS	8		2.5	3.3		SMALL OUTLINE	SOP16,.3	26 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		SISO OPERATION ALSO AVAILABLE	e4	30	260	10.2 mm	LV/LV-A/LVX/H
SN74HC166DRG3	Texas Instruments		INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS	8			2/6		SMALL OUTLINE	SOP16,.25			Shift Registers	1.27 mm	85 Cel				-40 Cel		DUAL		R-PDSO-G16					Not Qualified
SN74HC166FN	Texas Instruments		INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		CMOS	8			2/6		CHIP CARRIER	LDCC20,.4SQ			Shift Registers	1.27 mm	85 Cel				-40 Cel		QUAD		S-PQCC-J20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74LV595ADRE4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	CMOS	8		2.5	3.3		SMALL OUTLINE	SOP16,.25	25.5 ns		Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	45 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4	30	260	9.9 mm	LV/LV-A/LVX/H
SN74LV595ADBRE4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	CMOS	8		2.5	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	25.5 ns		Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	45 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT		NOT SPECIFIED	NOT SPECIFIED	6.2 mm	LV/LV-A/LVX/H
SN74LV164ADRE4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	45000000 Hz	CMOS	8		2.5	3.3		SMALL OUTLINE	SOP14,.25	24 ns		Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	105 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		AND-GATED SERIAL INPUTS (A AND B)	e4	30	260	8.65 mm	LV/LV-A/LVX/H
SN74HC164NSRG4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	5000000 Hz	CMOS	8		5	2/6		SMALL OUTLINE	SOP14,.3	220 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	28 MHz	R-PDSO-G14	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V			e4	30	260	10.2 mm	HC/UH
SN74HC674NTP1	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS	16					IN-LINE	DIP24,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-PDIP-T24					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74HC166DT	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS	8		5	2/6		SMALL OUTLINE	SOP16,.25	190 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		SISO OPERATION ALSO AVAILABLE	e4	40	260	9.9 mm	HC/UH
SN74LV166APWR	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	35000000 Hz	CMOS	8	TR	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	26 ns	12 Amp	Shift Registers	.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V	.02 mA	SISO OPERATION ALSO AVAILABLE	e4	NOT SPECIFIED	260	5 mm	LV/LV-A/LVX/H
SN74HC595JP4	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		CMOS	8			2/6		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-XDIP-T16											NOT SPECIFIED	NOT SPECIFIED
SN74HC194FH	Texas Instruments		INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC		YES	1		CMOS	4			2/6		CHIP CARRIER	LCC20,.35SQ			Shift Registers	1.27 mm	85 Cel				-40 Cel		QUAD		S-XQCC-N20					Not Qualified
SN74HC594DBLE	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	8		5			SMALL OUTLINE, SHRINK PITCH		250 ns			.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDSO-G16		6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER				6.2 mm	HC/UH
SN74AHCT594DBRE4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	8		5	5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	10.1 ns		Shift Registers	.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED	e4	30	260	6.2 mm	AHCT/VHCT/VT
CD74AC323E	Texas Instruments	PARALLEL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	95000000 Hz	CMOS	8		3.3	3.3/5		IN-LINE	DIP20,.3	147 ns		Shift Registers	2.54 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	108 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	1.5 V		HOLD MODE; COMMON I/O PINS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	24.325 mm	AC
SN74HC194N	Texas Instruments	PARALLEL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	25000000 Hz	CMOS	4		5	2/6		IN-LINE	DIP16,.3	180 ns		Shift Registers	2.54 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel		DUAL	36 MHz	R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	TRUE	2 V		HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	HC/UH
SN74AHC595DBLE	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	85000000 Hz	CMOS	8		3.3	2/5.5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	18.5 ns		Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	115 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED		NOT SPECIFIED	NOT SPECIFIED	6.2 mm	AHC
SN74HC597N	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS	8			2/6		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-PDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74HC595FH	Texas Instruments		INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC		YES	1		CMOS	8			2/6		CHIP CARRIER	LCC20,.35SQ			Shift Registers	1.27 mm	85 Cel				-40 Cel		QUAD		S-XQCC-N20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74HC164DTE4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS	8		5	2/6		SMALL OUTLINE	SOP14,.25	220 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	28 MHz	R-PDSO-G14	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		AND-GATED SERIAL INPUTS (A AND B)	e4	30	260	8.65 mm	HC/UH
SN74HC194DW	Texas Instruments	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	4		5	2/6		SMALL OUTLINE	SOP16,.4	180 ns		Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel		DUAL	36 MHz	R-PDSO-G16		6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V		HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	10.3 mm	HC/UH
SN74LV166APW	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	35000000 Hz	CMOS	8	TUBE	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	26 ns	12 Amp	Shift Register	.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	45 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V	.02 mA	SISO OPERATION ALSO AVAILABLE	e4	NOT SPECIFIED	260	5 mm	LV/LV-A/LVX/H
SN74HC166J4	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		CMOS	8			2/6		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-XDIP-T16											NOT SPECIFIED	NOT SPECIFIED
SN74LV166ADBRG4	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	35000000 Hz	CMOS	8		2.5	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	26 ns		Shift Registers	.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		SISO OPERATION ALSO AVAILABLE	e4	30	260	6.2 mm	LV/LV-A/LVX/H
SN74HC595J4	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		CMOS	8			2/6		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-XDIP-T16											NOT SPECIFIED	NOT SPECIFIED
SN74HC594DR-00	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	8		5		50 pF	SMALL OUTLINE		37 ns			1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER				9.9 mm	HC/UH
SN74HC299DW-00R	Texas Instruments	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	8		5		50 pF	SMALL OUTLINE		48 ns			1.27 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDSO-G20		6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V		HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL				12.8 mm	HC/UH
SN74LV165APWTG4	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	CMOS	8		2.5	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	26 ns		Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	45 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V		SISO OPERATION ALSO AVAILABLE	e4	30	260	5 mm	LV/LV-A/LVX/H

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.