GULL WING Digital Shift Registers 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
74F299SJX	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5			SMALL OUTLINE		8.5 ns			1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	70 MHz	R-PDSO-G20		5.5 V	2.108 mm	5.3 mm		TRUE	4.5 V						12.6 mm	F/FAST
74F299SC	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5			SMALL OUTLINE		8.5 ns			1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	70 MHz	R-PDSO-G20		5.5 V	2.642 mm	7.493 mm		TRUE	4.5 V						12.8 mm	F/FAST
74ACT11194DWR	Texas Instruments	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		4		5		50 pF	SMALL OUTLINE		8.8 ns			1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel		DUAL	100 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V		HOLD MODE; CENTER VCC/GND PINS				12.8 mm	ACT
CD54HCT165M96	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	18000000 Hz	CMOS		8		5	5		SMALL OUTLINE	SOP16,.25	60 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	18 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V		SISO OPERATION ALSO AVAILABLE				9.9 mm	HCT
74AC11898DW	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	40000000 Hz	CMOS		10		5	3.3/5	50 pF	SMALL OUTLINE	SOP20,.4	10 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	60 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	3 V		CENTER VCC/GND PINS; FLOW THROUGH ARCHITECTURE		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	AC
V62/04689-01XE	Texas Instruments	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS		8		5	2/6		SMALL OUTLINE	SOP16,.25	225 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V		CLOCK INHIBIT	e4	30	260	9.9 mm	HC/UH
V62/06603-01XE	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	75000000 Hz	CMOS		8	TR	2.5	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	26 ns	12 Amp	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	75 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V	.02 mA	SISO OPERATION ALSO AVAILABLE	e4	30	260	5 mm	LV/LV-A/LVX/H
74F322SJX	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5		50 pF	SMALL OUTLINE		12 ns			1.27 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE	0 Cel		DUAL	70 MHz	R-PDSO-G20		5.5 V	2.108 mm	5.3 mm	Not Qualified	TRUE	4.5 V	90 mA	COMMON I/O PINS; SIGN EXTEND FUNCTION; TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT				12.6 mm	F/FAST
74F299SCX	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5			SMALL OUTLINE		8.5 ns			1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	70 MHz	R-PDSO-G20		5.5 V	2.642 mm	7.493 mm		TRUE	4.5 V						12.8 mm	F/FAST
74F164ASC	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5			SMALL OUTLINE		8 ns			1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	80 MHz	R-PDSO-G14		5.5 V	1.753 mm	3.899 mm		TRUE	4.5 V						8.6235 mm	F/FAST
CD54HC165M96	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		8		4.5	2/6		SMALL OUTLINE	SOP16,.25	250 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	24 MHz	R-PDSO-G16		6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V		SISO OPERATION ALSO AVAILABLE				9.9 mm	HC/UH
74AC11194DW	Texas Instruments	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	100000000 Hz	CMOS		4		5	3.3/5	50 pF	SMALL OUTLINE	SOP20,.4	10.2 ns		Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel		DUAL	100 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	3 V		PARALLEL-TO-SERIAL, SERIAL-TO-PARALLEL OPERATION ALSO AVAILABLE		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	AC
74F164ASJ	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	80000000 Hz	TTL		8		5	5	50 pF	SMALL OUTLINE	SOP14,.3	8 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	Tin/Lead (Sn/Pb)	DUAL	80 MHz	R-PDSO-G14		5.5 V	2.108 mm	5.3 mm	Not Qualified	TRUE	4.5 V	55 mA		e0			10.11 mm	F/FAST
PCLV165BMPWREP	Texas Instruments	PARALLEL IN SERIAL OUT		GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	35000000 Hz	CMOS		8	TR, 13 INCH	2.5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	26 ns	12 Amp		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	75 MHz	R-PDSO-G16		5.5 V	1.2 mm	4.4 mm		COMPLEMENTARY	2 V	.02 mA					5 mm	LV/LV-A/LVX/H
V62/10612-01XE	Texas Instruments		MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		8			2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25			Shift Registers	.635 mm	125 Cel				-55 Cel		DUAL		R-PDSO-G16					Not Qualified
74ACT11194D	Texas Instruments		INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		4		5	5		SMALL OUTLINE	SOP20,.4			Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL			-40 Cel		DUAL		R-PDSO-G20					Not Qualified
74F164ASCX	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5			SMALL OUTLINE		8 ns			1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	80 MHz	R-PDSO-G14		5.5 V	1.753 mm	3.899 mm		TRUE	4.5 V						8.6235 mm	F/FAST
74F194SCX	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		4		5			SMALL OUTLINE		8 ns			1.27 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		DUAL	90 MHz	R-PDSO-G16		5.5 V	1.753 mm	3.899 mm		TRUE	4.5 V						9.902 mm	F/FAST
74ACT11898DWR	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		10		5		50 pF	SMALL OUTLINE		10.6 ns			1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	40 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V		CENTER VCC/GND PINS; FLOW THROUGH ARCHITECTURE				12.8 mm	ACT
74F194SJX	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	90000000 Hz	TTL		4		5	5	50 pF	SMALL OUTLINE	SOP16,.3	8 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel	TIN LEAD	DUAL	90 MHz	R-PDSO-G16		5.5 V	2.1 mm	5.3 mm	Not Qualified	TRUE	4.5 V	46 mA	HOLD MODE	e0			10.2 mm	F/FAST
74ACT11898DW	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		10		5	5	50 pF	SMALL OUTLINE	SOP20,.4	10.6 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	40 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V		CENTER VCC/GND PINS; FLOW THROUGH ARCHITECTURE		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	ACT
74F194SC	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		4		5			SMALL OUTLINE		8 ns			1.27 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		DUAL	90 MHz	R-PDSO-G16		5.5 V	1.753 mm	3.899 mm		TRUE	4.5 V						9.902 mm	F/FAST
74AC11898DWR	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		10		5		50 pF	SMALL OUTLINE		10 ns			1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	60 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	3 V		CENTER VCC/GND PINS; FLOW THROUGH ARCHITECTURE				12.8 mm	AC
74AC11194D	Texas Instruments		INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		4			3.3/5		SMALL OUTLINE	SOP20,.4			Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL			-40 Cel		DUAL		R-PDSO-G20					Not Qualified
V62/04690-01XE	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	25000000 Hz	CMOS		8	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	190 ns	4 Amp	Shift Register	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V	.08 mA	SISO OPERATION ALSO AVAILABLE	e4	30	260	9.9 mm	HC
74F194SJ	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	90000000 Hz	TTL		4		5	5	50 pF	SMALL OUTLINE	SOP16,.3	8 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel	TIN LEAD	DUAL	90 MHz	R-PDSO-G16		5.5 V	2.1 mm	5.3 mm	Not Qualified	TRUE	4.5 V	46 mA	HOLD MODE	e0			10.2 mm	F/FAST
TLC6A598MDWR	Texas Instruments	SERIAL IN PARALLEL OUT		GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	10000000 Hz		AEC-Q100	8	TR, 13 INCH	3.3		30 pF	SMALL OUTLINE	SOP24,.4				1.27 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	10 MHz	R-PDSO-G24	1	5.5 V	2.65 mm	7.5 mm		TRUE	3 V	.5 mA		e4		260	15.4 mm	6A
CD74HC165ME4	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	20000000 Hz	CMOS		8	TUBE	6	2/6	50 pF	SMALL OUTLINE	SOP16,.25	250 ns	5.2 Amp	Shift Register	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.91 mm	Not Qualified	COMPLEMENTARY	2 V	.16 mA	SISO OPERATION ALSO AVAILABLE	e4	30	260	9.9 mm	HC
SN74AHCT595PWG4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	85000000 Hz	CMOS		8		5	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	11.4 ns		Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE	e4	30	260	5 mm	AHCT/VHCT/VT
SN74LV164D	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	35000000 Hz	CMOS		8		3.3	3.3	50 pF	SMALL OUTLINE	SOP14,.25	32 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2.7 V		AND-GATED SERIAL INPUTS (A AND B)		NOT SPECIFIED	NOT SPECIFIED	8.65 mm	LV/LV-A/LVX/H
SN74HCS165QDYYRQ1	Texas Instruments	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1	120000000 Hz	CMOS	AEC-Q100	8	TR	5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.13,20	45 ns	7.8 Amp		.5 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G16	1	6 V	1.1 mm	2 mm		COMPLEMENTARY	2 V	.002 mA		e4	30	260	4.2 mm	HC
SN74HCS164QPWRQ1	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1		CMOS	AEC-Q100	8	TR	5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	42 ns	7.8 Amp		.65 mm	125 Cel	RIGHT	TOTEM POLE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	62 MHz	R-PDSO-G14	1	6 V	1.2 mm	4.4 mm		TRUE	2 V	.002 mA		e4	30	260	5 mm	HC
SN74LV594AD	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1		CMOS		8	TUBE	2.5	3.3	50 pF	SMALL OUTLINE	SOP16,.25	18.6 ns	12 Amp	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V	.02 mA	PARALLEL OUTPUT IS REGISTERED	e4	NOT SPECIFIED	260	9.9 mm	LV/LV-A/LVX/H
SN74AS95D	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		4		5		50 pF	SMALL OUTLINE	SOP14,.25	9.5 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	100 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.905 mm	Not Qualified	TRUE	4.5 V	39 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD		NOT SPECIFIED	NOT SPECIFIED	8.645 mm	AS
SN74ALS164ANSRG4	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	TTL		8		5	5		SMALL OUTLINE	SOP14,.3	17 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	75 MHz	R-PDSO-G14	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		AND-GATED SERIAL (A AND B) INPUTS	e4	30	260	10.2 mm	ALS
SN74F166D	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	110000000 Hz	TTL		8		5	5	50 pF	SMALL OUTLINE	SOP16,.25	9 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	110 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	60 mA	CLOCK INHIBIT		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	F/FAST
SN74LV595APWG4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	40000000 Hz	CMOS		8		2.5	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	25.5 ns		Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	45 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4	30	260	5 mm	LV/LV-A/LVX/H
SN74AHCT594NSRE4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	95000000 Hz	CMOS		8		5	5		SMALL OUTLINE	SOP16,.3	10.1 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED	e4	30	260	10.2 mm	AHCT/VHCT/VT
SN74LS299DWRE4	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5	5	15 pF	SMALL OUTLINE	SOP20,.4	39 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	20 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	53 mA	HOLD MODE; COMMON I/O PINS		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	LS
SN74AHCT595PWLE	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	85000000 Hz	CMOS		8		5	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	11.4 ns		Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	115 MHz	R-PDSO-G16		5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED		NOT SPECIFIED	NOT SPECIFIED	5 mm	AHCT/VHCT
CD74HC195NSR	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	20000000 Hz	CMOS		4	TR	4.5	2/6	50 pF	SMALL OUTLINE	SOP16,.3	265 ns	5.2 Amp	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	60 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V	.16 mA	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT	e4	30	260	10.2 mm	HC
SN74HC166DTE4	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS		8		5	2/6		SMALL OUTLINE	SOP16,.25	190 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		SISO OPERATION ALSO AVAILABLE	e4	40	260	9.9 mm	HC/UH
SN74AHCT59PWR	Texas Instruments		INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	95000000 Hz	CMOS		8		5	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25			Shift Registers	.635 mm	85 Cel				-40 Cel		DUAL		R-PDSO-G16					Not Qualified
SN74S299DW	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5	5	45 pF	SMALL OUTLINE	SOP20,.4	21 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	50 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	225 mA	HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	S
SN74LS164DRG4	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	TTL		8		5	5		SMALL OUTLINE	SOP14,.25	32 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	36 MHz	R-PDSO-G14	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V		GATED SERIAL INPUTS (A AND B)	e4	30	260	8.65 mm	LS
SN74LS166ADRE4	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	TTL		8		5	5	15 pF	SMALL OUTLINE	SOP16,.25	25 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	32 mA	CLOCK INHIBIT	e4	30	260	9.9 mm	LS
SN74AHC595NSRG4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	85000000 Hz	CMOS		8		3.3	2/5.5		SMALL OUTLINE	SOP16,.3	18.5 ns		Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	115 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	AHC/VHC/H/U/V
SN74AHCT595DRE4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	85000000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	11.4 ns	8 Amp	Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	.04 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE	e4	NOT SPECIFIED	260	9.9 mm	AHCT/VHCT/VT

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.