GULL WING Digital Shift Registers 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74LS95BD3	Texas Instruments		COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		4		5	5		SMALL OUTLINE	SOP14,.25			Shift Registers	1.27 mm	70 Cel				0 Cel		DUAL		R-PDSO-G14
CD74HC194PWRG4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		4		4.5	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	265 ns		Shift Registers	.65 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		HOLD MODE	e4	30	260	5 mm	HC/UH
SN74LS674DW3	Texas Instruments		COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		16					SMALL OUTLINE	SOP24,.4			Shift Registers	1.27 mm	70 Cel				0 Cel		DUAL		R-PDSO-G24											NOT SPECIFIED	NOT SPECIFIED
SN74LV594ANS	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		8		2.5	3.3		SMALL OUTLINE	SOP16,.3	18.6 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	115 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V				NOT SPECIFIED	NOT SPECIFIED	10.2 mm	LV/LV-A/LVX/H
CD74HCT597MG4	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		8		5	5		SMALL OUTLINE	SOP16,.25	57 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	16 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		SISO OPERATION ALSO AVAILABLE	e4	30	260	9.9 mm	HCT
SN74HC166AIPWRQ1	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS	AEC-Q100	8		5	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	190 ns		Shift Registers	.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	29 MHz	R-PDSO-G16		6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		CLOCK INHIBIT		NOT SPECIFIED	NOT SPECIFIED	5 mm	HC/UH
CD74HC195PWRE4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		4		4.5	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	265 ns		Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT	e4	30	260	5 mm	HC/UH
SN74LS589DP1	Texas Instruments		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8					SMALL OUTLINE	SOP16,.25			Shift Registers	1.27 mm	70 Cel				0 Cel		DUAL		R-PDSO-G16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74LS595NSRG4	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	TTL		8		5	5		SMALL OUTLINE	SOP16,.3	25 ns		Shift Registers	1.27 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE	0 Cel		DUAL	20 MHz	R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified	TRUE	4.75 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	LS
SN74ALS164ADRG4	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	TTL		8		5	5	50 pF	SMALL OUTLINE	SOP14,.25	17 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	50 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	24 mA	AND-GATED SERIAL (A AND B) INPUTS	e4	30	260	8.65 mm	ALS
CD4034BME4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	2000000 Hz	CMOS		8		5	5/15		SMALL OUTLINE	SOP24,.4	700 ns		Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	7 MHz	R-PDSO-G24	1	18 V	2.65 mm	7.5 mm	Not Qualified	TRUE	3 V		COMMON I/O PINS, SERIAL INPUT-PARALLEL OUTPUT AND SERIAL INPUT-SERIAL OUTPUT OPERATION AVAILABLE	e4	30	260	15.4 mm	4000/14000/40000
CD40194BPW	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	3000000 Hz	CMOS		4		5	5/15		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	440 ns		Shift Registers	.65 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	8 MHz	R-PDSO-G16		18 V	1.2 mm	4.4 mm	Not Qualified	TRUE	3 V				NOT SPECIFIED	NOT SPECIFIED	5 mm	4000/14000/40000
DM74LS165WM	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5			SMALL OUTLINE		47 ns			1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	25 MHz	R-PDSO-G16		5.25 V	2.65 mm	7.5 mm		COMPLEMENTARY	4.75 V						10.3 mm	LS
SN74LS322ADW3	Texas Instruments		COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	TTL		8		5	5		SMALL OUTLINE	SOP20,.4			Shift Registers	1.27 mm	70 Cel				0 Cel		DUAL		R-PDSO-G20
SN74HC299DW	Texas Instruments	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS		8		5	2/6		SMALL OUTLINE	SOP20,.4	288 ns		Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	36 MHz	R-PDSO-G20		6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V		COMMON I/O PINS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	HC/UH
SN74LV165APWTE4	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	CMOS		8		2.5	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	26 ns		Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	45 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V		SISO OPERATION ALSO AVAILABLE	e4	30	260	5 mm	LV/LV-A/LVX/H
SN74AHCT594NSRG4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	95000000 Hz	CMOS		8		5	5		SMALL OUTLINE	SOP16,.3	10.1 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED	e4	30	260	10.2 mm	AHCT/VHCT/VT
SN74LS597D	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	20000000 Hz	TTL		8	TUBE	5		45 pF	SMALL OUTLINE	SOP16,.25	60 ns	24 Amp	Shift Registers	1.27 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	25 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	53 mA	SISO OPERATION ALSO AVAILABLE	e4	NOT SPECIFIED	260	9.9 mm	LS
SN74ALS166NSR	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	45000000 Hz	TTL		8	TR	5	5		SMALL OUTLINE	DIP16,.3	13 ns	8 Amp	Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	45 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	24 mA	SISO OPERATION ALSO AVAILABLE	e4	30	260	10.2 mm	ALS
SN74LV594APWE4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	95000000 Hz	CMOS		8		2.5	2.5/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	18.6 ns		Shift Registers	.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED	e4	30	260	5 mm	LV/LV-A/LVX/H
SN74HCS166QPWRQ1	Texas Instruments	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1	155000000 Hz	CMOS	AEC-Q100	8	TR	5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	40 ns	7.8 Amp		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	155 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm		TRUE	2 V	.002 mA		e4	30	260	5 mm	HC
SN74HCS164QDYYRQ1	Texas Instruments	SERIAL IN PARALLEL OUT		GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1	50000000 Hz	CMOS	AEC-Q100	8	TR, 13 INCH	5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.12,20	42 ns	7.8 Amp		.5 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	62 MHz	R-PDSO-G14	1	6 V	1.1 mm	2 mm		TRUE	2 V	.002 mA		e4		260	4.2 mm	HC
SN74ALS166DBRG4	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5	5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	13 ns		Shift Registers	.65 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	45 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		SISO OPERATION ALSO AVAILABLE	e4	30	260	6.2 mm	ALS
SN74HCS166QDRQ1	Texas Instruments	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1	155000000 Hz	CMOS	AEC-Q100	8	TR	5		50 pF	SMALL OUTLINE	SOP16,.25	40 ns	7.8 Amp		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	155 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm		TRUE	2 V	.002 mA		e4	30	260	9.9 mm	HC
SN74ALS963DWP3	Texas Instruments		COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8					SMALL OUTLINE	SOP20,.4			Shift Registers	1.27 mm	70 Cel				0 Cel		DUAL		R-PDSO-G20
CD74HC194PWTG4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		4		4.5	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	265 ns		Shift Registers	.65 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		HOLD MODE	e4	30	260	5 mm	HC/UH
SN74AHCT594D	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	95000000 Hz	CMOS		8	TUBE	5	5	50 pF	SMALL OUTLINE	SOP16,.25	10.1 ns	8 Amp	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	.02 mA	PARALLEL OUTPUT IS REGISTERED	e4	30	260	9.9 mm	AHCT/VHCT/VT
SN74AS95AD	Texas Instruments		COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		4					SMALL OUTLINE	SOP14,.25			Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL			0 Cel		DUAL		R-PDSO-G14					Not Qualified
SN74LV166APWRE4	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	35000000 Hz	CMOS		8		2.5	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	26 ns		Shift Registers	.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		SISO OPERATION ALSO AVAILABLE	e4	30	260	5 mm	LV/LV-A/LVX/H
SN74ALS299DW3	Texas Instruments		COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5	5		SMALL OUTLINE	SOP20,.4			Shift Registers	1.27 mm	70 Cel				0 Cel		DUAL		R-PDSO-G20											NOT SPECIFIED	NOT SPECIFIED
SN74LV595ADBRG4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	CMOS		8		2.5	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	25.5 ns		Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	115 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V				NOT SPECIFIED	NOT SPECIFIED	6.2 mm	LV/LV-A/LVX/H
CD74ACT164ME4	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	70000000 Hz	CMOS		8		5	5		SMALL OUTLINE	SOP14,.25	14.9 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	70 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V			e4	30	260	8.65 mm	ACT
SN74AHCT595NSR	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	85000000 Hz	CMOS		8		5	5		SMALL OUTLINE	SOP16,.3	11.4 ns		Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	115 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	AHCT/VHCT/VT
SN74F166DR	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5		50 pF	SMALL OUTLINE		9 ns			1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	110 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	60 mA	CLOCK INHIBIT				9.9 mm	F/FAST
SN74AS194DP3	Texas Instruments		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		4					SMALL OUTLINE	SOP16,.25			Shift Registers	1.27 mm	70 Cel				0 Cel		DUAL		R-PDSO-G16											NOT SPECIFIED	NOT SPECIFIED
SN74LS95BD	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		4		5	5	15 pF	SMALL OUTLINE	SOP14,.25	32 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	36 MHz	R-PDSO-G14		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	21 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD		NOT SPECIFIED	NOT SPECIFIED	8.65 mm	LS
CD4035BMT	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	2000000 Hz	CMOS		4		5	5/15		SMALL OUTLINE	SOP16,.25	500 ns		Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	8 MHz	R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	CONFIGURABLE	3 V		J AND K BAR SERIAL INPUT	e4	30	260	9.9 mm	4000/14000/40000
SN74AS95DP3	Texas Instruments		COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		4					SMALL OUTLINE	SOP14,.25			Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL			0 Cel		DUAL		R-PDSO-G14
SN74ALS166DG4	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5	5	50 pF	SMALL OUTLINE	SOP16,.25	13 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	45 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	24 mA	SISO OPERATION ALSO AVAILABLE	e4	30	260	9.9 mm	ALS
SN74LV164ANSE4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		8		2.5			SMALL OUTLINE		24 ns			1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	105 MHz	R-PDSO-G14	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V			e4	30	260	10.2 mm	LV/LV-A/LVX/H
SN74HC165D3	Texas Instruments		INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		8			2/6		SMALL OUTLINE	SOP16,.25			Shift Registers	1.27 mm	85 Cel				-40 Cel		DUAL		R-PDSO-G16											NOT SPECIFIED	NOT SPECIFIED
SN74AHC594DRG4	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	95000000 Hz	CMOS		8	TR	3.3	2/5.5	50 pF	SMALL OUTLINE	SOP16,.25	13.9 ns	8 Amp	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V	.04 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE	e4	NOT SPECIFIED	260	9.9 mm	AHC/VHC/H/U/V
CD74HC164M96G4	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	20000000 Hz	CMOS		8	TR	4.5	2/6	50 pF	SMALL OUTLINE	SOP14,.25	255 ns	5.2 Amp	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G14	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V	.16 mA		e4	NOT SPECIFIED	260	8.65 mm	HC/UH
CD4015BMTE4	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	3000000 Hz	CMOS		4		5	5/15		SMALL OUTLINE	SOP16,.25	320 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	8.5 MHz	R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V		INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER	e4	30	260	9.9 mm	4000/14000/40000
SN74LS323DW3	Texas Instruments		COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5	5		SMALL OUTLINE	SOP20,.4			Shift Registers	1.27 mm	70 Cel				0 Cel		DUAL		R-PDSO-G20
SN74LV595ANSRG4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	CMOS		8		2.5	3.3		SMALL OUTLINE	SOP16,.3	25.5 ns		Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	45 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V			e4	30	260	10.2 mm	LV/LV-A/LVX/H
SN74S299DWR	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5	5	45 pF	SMALL OUTLINE	SOP20,.4	21 ns		Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	50 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	225 mA	HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	S
SN74AS195D	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		4		5		50 pF	SMALL OUTLINE	SOP16,.25	10.5 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	70 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	57 mA	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	AS

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.