NXP Semiconductors Digital Shift Registers 1,471

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
74HCT4015D	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		4	5		50 pF	SMALL OUTLINE		53 ns			125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	5.5 V			Not Qualified	TRUE	4.5 V	INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER	e4				HCT
74HC166NB	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		8	5		50 pF	IN-LINE		45 ns		2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN/NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDIP-T16		6 V	4.2 mm	7.62 mm	Not Qualified	TRUE	2 V	CLOCK INHIBIT	e3/e4			19.025 mm	HC/UH
74HC597D,652	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	53 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	6 V			Not Qualified	TRUE	2 V		e4	30	260		HC/UH
74HCT166D,653	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5		50 pF	SMALL OUTLINE		60 ns			125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	17 MHz	R-PDSO-G16	1	5.5 V			Not Qualified	TRUE	4.5 V	CLOCK INHIBIT	e4	30	260		HCT
74HC7597PW	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		265 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	107 MHz	R-PDSO-G16		6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V					5 mm	HC/UH
HEF40195BT-T	NXP Semiconductors	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4	5		50 pF	SMALL OUTLINE		255 ns		1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	5 MHz	R-PDSO-G16		15 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V	J AND KBAR SERIAL INPUT				9.9 mm	4000/14000/40000
74HCT165N	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	21000000 Hz	CMOS		8	5	5	50 pF	IN-LINE	DIP16,.3	51 ns	Shift Registers	2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	17 MHz	R-PDIP-T16		5.5 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V	CLOCK INHIBIT	e4			19.025 mm	HCT
74HCT4094DB-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE, SHRINK PITCH		65 ns		.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm		TRUE	4.5 V					6.2 mm	HCT
74AHCT595D-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE		12 ns		1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm		TRUE	4.5 V					9.9 mm	AHCT/VHCT/VT
HEF4015BTD-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		4	5		50 pF	SMALL OUTLINE		260 ns		1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	7 MHz	R-PDSO-G16	1	15 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V	INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER				9.9 mm	4000/14000/40000
74AHC164D-Q100J	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE		20.5 ns		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	85 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm		TRUE	2 V					8.65 mm	AHC/VHC/H/U/V
PCA9701PW-T	NXP Semiconductors		AUTOMOTIVE	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	5000000 Hz			16		3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		Shift Registers	.635 mm	125 Cel				-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G24	1				Not Qualified				e4
HEF4015BDB	NXP Semiconductors	SERIAL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	2		CMOS		4	5		50 pF	IN-LINE		260 ns		2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	7 MHz	R-GDIP-T16		15 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V	INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER					4000/14000/40000
74HC166PW-Q100J	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	4000000 Hz	CMOS	AEC-Q100	8	5	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	225 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDSO-G16		6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V					5 mm	HC/UH
74HCT195PW-T	NXP Semiconductors	PARALLEL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4	5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		48 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	18 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT				5 mm	HCT
74HCT299D	NXP Semiconductors	PARALLEL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	5	5	50 pF	SMALL OUTLINE	SOP20,.4	56 ns	Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	17 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e4	30	260	12.8 mm	HCT
HEF40195BDB	NXP Semiconductors	PARALLEL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		CMOS		4	5		50 pF	IN-LINE		255 ns		2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	5 MHz	R-GDIP-T16		15 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V	J AND KBAR SERIAL INPUT					4000/14000/40000
74HCT165BQ,115	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		8	5	5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.1X.14,20	51 ns	Shift Registers	.5 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	17 MHz	R-PQCC-N16	1	5.5 V	1 mm	2.5 mm	Not Qualified	COMPLEMENTARY	4.5 V	CLOCK INHIBIT	e4	30	260	3.5 mm	HCT
74HCT166D	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	5	5	50 pF	SMALL OUTLINE	SOP16,.25	60 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	17 MHz	R-PDSO-G16	1	5.5 V			Not Qualified	TRUE	4.5 V	CLOCK INHIBIT	e4	30	260		HCT
74HCT166N,652	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	20000000 Hz	CMOS		8	5	5	50 pF	IN-LINE	DIP16,.3	60 ns	Shift Registers	2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	17 MHz	R-PDIP-T16		5.5 V	4.7 mm	7.62 mm	Not Qualified	TRUE	4.5 V	CLOCK INHIBIT	e4			21.6 mm	HCT
74HCT595DB-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE, SHRINK PITCH		63 ns		.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	SERIAL STANDARD OUTPUT FOR CASCADING	e4			6.2 mm	HCT
HEF4731VDB	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	4		CMOS		64	5		50 pF	IN-LINE		230 ns		2.54 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel		DUAL	2.25 MHz	R-GDIP-T14		12.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	INDIVIDUAL CLOCK FOR EACH SHIFT REGISTER					4000/14000/40000
74HC4094N,652	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	24000000 Hz	CMOS		8	5	2/6	50 pF	IN-LINE	DIP16,.3	295 ns	Shift Registers	2.54 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDIP-T16		6 V	4.2 mm	7.62 mm	Not Qualified	TRUE	2 V	PARALLEL OUTPUT IS LATCHED; UNLATCHED SERIAL SHIFT RIGHT OUTPUT	e4			19.025 mm	HC/UH
74HCT7597PW-T	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		53 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	79 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V					5 mm	HCT
74HC597D	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	53 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	6 V			Not Qualified	TRUE	2 V		e4	30	260		HC/UH
74AHCT595BQ-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		12 ns		.5 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		QUAD	90 MHz	R-PQCC-N16	1	5.5 V	1 mm	2.5 mm		TRUE	4.5 V					3.5 mm	AHCT/VHCT/VT
HEF4094BTD	NXP Semiconductors	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	330 ns	Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	5 MHz	R-PDSO-G16		15 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V	PARALLEL OUTPUT IS LATCHED; UNLATCHED SERIAL SHIFT RIGHT OUTPUT		40	260	9.9 mm	4000/14000/40000
HEF4517BDB	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	2		CMOS		64	5		50 pF	IN-LINE		440 ns		2.54 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	2 MHz	R-GDIP-T16		15 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V	OUTPUTS ALSO AVAILABLE AT 16TH, 32ND AND 48TH STAGE OF THE SHIFT REGISTER					4000/14000/40000
74HCT7597D	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5		50 pF	SMALL OUTLINE		53 ns			125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	79 MHz	R-PDSO-G16		5.5 V			Not Qualified	TRUE	4.5 V						HCT
74HCT7597DB	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE, SHRINK PITCH		53 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	79 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V					6.2 mm	HCT
74LVC594ABQ-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	3.3			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		18.2 ns		.5 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		QUAD	115 MHz	R-PQCC-N16		3.6 V	1 mm	2.5 mm		TRUE	1.65 V					3.5 mm	LVC/LCX/Z
HEF4517BPB	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS		64	5		50 pF	IN-LINE		440 ns		2.54 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	2 MHz	R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	TRUE	3 V	OUTPUTS ALSO AVAILABLE AT 16TH, 32ND AND 48TH STAGE OF THE SHIFT REGISTER				21.6 mm	4000/14000/40000
HEF4021BT	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	6000000 Hz	CMOS		8	5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	250 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	6 MHz	R-PDSO-G16	1	15 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V	OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER	e4	30	260	9.9 mm	4000/14000/40000
74LV4094DB-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	90 ns	Shift Registers	.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	3.6 V	2 mm	5.3 mm	Not Qualified	TRUE	1 V	SISO OPERATION ALSO AVAILABLE	e4	30	260	6.2 mm	LV/LV-A/LVX/H
HEF4094BD	NXP Semiconductors	SERIAL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	5000000 Hz	CMOS		8	5	5/15	50 pF	IN-LINE	DIP16,.3	330 ns	Shift Registers	2.54 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	5 MHz	R-GDIP-T16		15 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V	PARALLEL OUTPUT IS LATCHED; UNLATCHED SERIAL SHIFT RIGHT OUTPUT					4000/14000/40000
74HC165PW-Q100	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		250 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.1 mm	4.4 mm		COMPLEMENTARY	2 V		e4			5 mm	HC/UH
74AHC164PW-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	65000000 Hz	CMOS		8	5	2/5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	20.5 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	85 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V		e4			5 mm	AHC/VHC/H/U/V
74VHCT595PW-Q100J	NXP Semiconductors	SERIAL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		12 ns		.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm		TRUE	4.5 V					5 mm	AHCT/VHCT/VT
74AHC594DB	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5	2.5/5.5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	15.1 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V			30	260	6.2 mm	HC/UH
NPIC6C4894DJ	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		12	5			SMALL OUTLINE				1.27 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel		DUAL	10 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm		TRUE	4.5 V					12.8 mm	NPIC
NPIC6C596PW-Q100	NXP Semiconductors	SERIAL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1			AEC-Q100	8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				.65 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm		TRUE	4.5 V		e4			5 mm	NPIC
74AHC595D-Q100,118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	90000000 Hz	CMOS	AEC-Q100	8	5	2/5.5		SMALL OUTLINE	SOP16,.25	20.1 ns	Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V			30	260	9.9 mm	AHC/VHC/H/U/V
74LV164PWDH-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	3.3		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		49 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	100 MHz	R-PDSO-G14		5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1 V					5 mm	LV/LV-A/LVX/H
74HC299DB,112	NXP Semiconductors	PARALLEL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	60 ns	Shift Registers	.65 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	17 MHz	R-PDSO-G20	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e4	30	260	7.2 mm	HC/UH
74AHC594PW,112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5	2.5/5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	15.1 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V		e4	30	260	5 mm	HC/UH
74HCT194DB-T	NXP Semiconductors	PARALLEL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4	5		50 pF	SMALL OUTLINE, SHRINK PITCH		48 ns		.65 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	HOLD MODE				6.2 mm	HCT
74AHC595D,112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	40000000 Hz	CMOS		8	5	2/5.5		SMALL OUTLINE	SOP16,.25	20.1 ns	Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		e4	30	260	9.9 mm	AHC/VHC/H/U/V
74HC594N,112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	20000000 Hz	CMOS		8	5	2/6		IN-LINE	DIP16,.3	225 ns	Shift Registers	2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDIP-T16		6 V	4.2 mm	7.62 mm	Not Qualified	TRUE	2 V	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4			19.025 mm	HC/UH

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.