NXP Semiconductors Digital Shift Registers 1,471

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
935298766115	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		250 ns		.5 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		QUAD	24 MHz	R-PQCC-N16		6 V	1 mm	2.5 mm		COMPLEMENTARY	2 V						3.5 mm	HC/UH
935300349118	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE		60 ns		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm		TRUE	4.5 V						9.9 mm	HCT
HEC4014BDB	NXP Semiconductors	PARALLEL IN SERIAL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		CMOS		8	5		50 pF	IN-LINE		260 ns		2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	6 MHz	R-GDIP-T16		15 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V		OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER					4000/14000/40000
935300447118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE		54 ns		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	18 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm		TRUE	4.5 V						8.65 mm	HCT
N74F166N	NXP Semiconductors	PARALLEL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	110000000 Hz	TTL		8	5	5	50 pF	IN-LINE	DIP16,.3	12 ns	Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDIP-T16		5.5 V	4.2 mm	7.62 mm	Not Qualified	TRUE	4.5 V	70 mA	CLOCK INHIBIT	e4			19.025 mm	F/FAST
933876970623	NXP Semiconductors	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL		16	5			SMALL OUTLINE		13.5 ns		1.27 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	90 MHz	R-PDSO-G24		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V				40	260	15.4 mm	F/FAST
935067450112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	3.3			SMALL OUTLINE		49 ns		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	30 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	1 V			e4			8.65 mm	LV/LV-A/LVX/H
935188350112	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		51 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	17 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4			5 mm	HCT
935190160112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE, SHRINK PITCH		225 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16		6 V	2 mm	5.3 mm		TRUE	2 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4			6.2 mm	HC/UH
N74F194N,602	NXP Semiconductors	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	90000000 Hz	TTL		4	5	5	50 pF	IN-LINE	DIP16,.3	8 ns	Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	90 MHz	R-PDIP-T16		5.5 V			Not Qualified	TRUE	4.5 V	46 mA	HOLD MODE	e4				F/FAST
935166090112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	3.3			SMALL OUTLINE, SHRINK PITCH		90 ns		.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	3.6 V	2 mm	5.3 mm	Not Qualified	TRUE	1 V			e4			6.2 mm	LV/LV-A/LVX/H
935265559112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE		10 ns		1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V			e4			9.9 mm	AHCT/VHCT
935297268115	NXP Semiconductors	SERIAL IN SERIAL OUT	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				.5 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel		QUAD		R-PQCC-N16		5.5 V	1 mm	2.5 mm		TRUE	4.5 V						3.5 mm	NPIC
935166030118	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	3.3			SMALL OUTLINE, SHRINK PITCH		76 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	30 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	1 V				NOT SPECIFIED	NOT SPECIFIED	6.2 mm	LV/LV-A/LVX/H
935188520818	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		265 ns		.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16		6 V	1.1 mm	4.4 mm		TRUE	2 V		SERIAL STANDARD OUTPUT FOR CASCADING	e4			5 mm	HC/UH
935302553118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	12	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				.65 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel		DUAL	10 MHz	R-PDSO-G20		5.5 V	1.1 mm	4.4 mm		TRUE	4.5 V						6.5 mm	NPIC
935200990112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		63 ns		.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V			e4			5 mm	HCT
935302552118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		12	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				.65 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel		DUAL	10 MHz	R-PDSO-G20		5.5 V	1.1 mm	4.4 mm		TRUE	4.5 V						6.5 mm	NPIC
935165210112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	4.5			SMALL OUTLINE, SHRINK PITCH		240 ns		.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V			e4			6.2 mm	HC/UH
935190350118	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE, SHRINK PITCH		51 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	17 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4			6.2 mm	HCT
933757320652	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		8	4.5			IN-LINE		265 ns		2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDIP-T16		6 V	4.7 mm	7.62 mm	Not Qualified	TRUE	2 V			e4			21.6 mm	HC/UH
935265465112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE		20.5 ns		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	65 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V			e4			8.65 mm	AHC
N74F299N,602	NXP Semiconductors	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	70000000 Hz	TTL		8	5	5	50 pF	IN-LINE	DIP20,.3	10 ns	Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	85 MHz	R-PDIP-T20		5.5 V	4.2 mm	7.62 mm	Not Qualified	TRUE	4.5 V	90 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e4	40	260	26.73 mm	F/FAST
935043380118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE		225 ns		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16		6 V	1.75 mm	3.9 mm		TRUE	2 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4			9.9 mm	HC/UH
N74F323D	NXP Semiconductors	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	TTL		8	5	5	50 pF	SMALL OUTLINE	SOP20,.4	10 ns	Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	70 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	90 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL				12.8 mm	F/FAST
935265466112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		20.5 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	65 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V			e4			5 mm	AHC
935033130602	NXP Semiconductors	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL		8	5			SMALL OUTLINE		13 ns		1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V			e4			9.9 mm	F/FAST
NSL001D	NXP Semiconductors		INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz			8	5	5		SMALL OUTLINE	SOP16,.25		Shift Registers	1.27 mm	85 Cel	RIGHT			-40 Cel		DUAL		R-PDSO-G16					Not Qualified
935302407115	NXP Semiconductors	SERIAL IN SERIAL OUT	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				.5 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel		QUAD		R-PQCC-N16		5.5 V	1 mm	2.5 mm		TRUE	2.3 V						3.5 mm	NPIC
N74F676D	NXP Semiconductors	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL		16	5		50 pF	SMALL OUTLINE		13.5 ns		1.27 mm	70 Cel	RIGHT			0 Cel		DUAL	90 MHz	R-PDSO-G24		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	72 mA	HOLD MODE; CHIP SELECT DISABLES BOTH SERIAL & PARALLEL OPERATIONS				15.4 mm	F/FAST
933406730653	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		64	5			SMALL OUTLINE		440 ns		1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	8 MHz	R-PDSO-G16		15 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V		OUTPUTS ALSO AVAILABLE AT 16TH, 32ND AND 48TH STAGE OF THE SHIFT REGISTER	e4			9.9 mm	4000/14000/40000
S5491W	NXP Semiconductors	SERIAL IN SERIAL OUT	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	YES	1	10000000 Hz	TTL		8	5	5	15 pF	FLATPACK	FL14,.3	40 ns	Shift Registers	1.27 mm	125 Cel	RIGHT			-55 Cel	Tin/Lead (Sn/Pb)	DUAL	18 MHz	R-CDFP-F14					Not Qualified	COMPLEMENTARY		50 mA		e0				TTL/H/L
N54F676/B3A	NXP Semiconductors	PARALLEL IN SERIAL OUT	MILITARY	NO LEAD	28	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	1		TTL		16	5		50 pF	CHIP CARRIER		13.5 ns		1.27 mm	125 Cel	RIGHT		NEGATIVE EDGE	-55 Cel		QUAD	90 MHz	S-CQCC-N28		5.5 V	1.905 mm	11.4554 mm	Not Qualified	TRUE	4.5 V	72 mA	HOLD MODE; CHIP SELECT DISABLES BOTH SERIAL & PARALLEL OPERATIONS				11.4554 mm	F/FAST
935282016112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		15.1 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm		TRUE	2 V						5 mm	HCT
933373330652	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		64	5			SMALL OUTLINE		480 ns		1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	10 MHz	R-PDSO-G16	1	15 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V			e4			9.9 mm	4000/14000/40000
935298636118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		12 ns		.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm		TRUE	4.5 V						5 mm	AHCT/VHCT/VT
N74F323N	NXP Semiconductors	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	70000000 Hz	TTL		8	5	5	50 pF	IN-LINE	DIP20,.3	10 ns	Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	70 MHz	R-PDIP-T20	1	5.5 V			Not Qualified	TRUE	4.5 V	90 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL					F/FAST
935302449118	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		250 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		15 V	1.1 mm	4.4 mm		TRUE	3 V						5 mm	4000/14000/40000
935291138115	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	14	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		255 ns		.5 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		QUAD	24 MHz	R-PQCC-N14		6 V	1 mm	2.5 mm		TRUE	2 V						3 mm	HC/UH
933757330653	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	4.5			SMALL OUTLINE		265 ns		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V			e4			9.9 mm	HC/UH
933836760602	NXP Semiconductors	SERIAL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL		8	5			IN-LINE		12.5 ns		2.54 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE	0 Cel		DUAL	90 MHz	R-PDIP-T16		5.5 V	4.2 mm	7.62 mm	Not Qualified	TRUE	4.5 V				40	245	19.025 mm	F/FAST
N74F299D,623	NXP Semiconductors	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL		8	5		50 pF	SMALL OUTLINE		10 ns		1.27 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	85 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	90 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e4			12.8 mm	F/FAST
N74F322D-T	NXP Semiconductors	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL		8	5		50 pF	SMALL OUTLINE		10 ns		1.27 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE	0 Cel		DUAL	90 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	90 mA	COMMON I/O PINS; SIGN EXTEND FUNCTION; TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT				12.8 mm	F/FAST
5962-86870012X	NXP Semiconductors	SERIAL IN PARALLEL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	1		TTL	MIL-STD-883	8	5			CHIP CARRIER		15 ns			125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		QUAD		S-CQCC-N20		5.5 V			Not Qualified	TRUE	4.5 V							ALS
935200990118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		63 ns		.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V				NOT SPECIFIED	NOT SPECIFIED	5 mm	HCT
935297272115	NXP Semiconductors	SERIAL IN SERIAL OUT	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				.5 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel		QUAD		R-PQCC-N16		5.5 V	1 mm	2.5 mm		TRUE	4.5 V						3.5 mm	NPIC
54F164/B2A	NXP Semiconductors	SERIAL IN PARALLEL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	1		TTL		8	5		50 pF	CHIP CARRIER		13 ns			125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		QUAD	80 MHz	S-CQCC-N20		5.5 V			Not Qualified	TRUE	4.5 V	50 mA						F/FAST
5962-01-241-7373	NXP Semiconductors	PARALLEL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	7000000 Hz	CMOS		4		5/15		IN-LINE	DIP16,.3		Shift Registers	2.54 mm	85 Cel				-40 Cel	MATTE TIN	DUAL		R-PDIP-T16	1				Not Qualified					e3

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.