Onsemi Digital Shift Registers 402

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
NLV74HC595ADG	Onsemi	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	4000000 Hz	CMOS	AEC-Q100	8		5	2/6		SMALL OUTLINE	SOP16,.25		Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL		R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V			e3	30	260	9.9 mm	HC/UH
MC100EP446FA	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.025 ns		.8 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	TIN LEAD	QUAD	3200 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	7 mm	100E
NLV74HC165ADTR2G	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS	AEC-Q100	8	TR	3	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	225 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	HC/UH
MC10EP446FAR2G	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.025 ns		.8 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	TIN	QUAD	3200 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	7 mm	10E
NLV74HC595AMN1TWG	Onsemi	SERIAL IN PARALLEL OUT	MILITARY	NO LEAD	16	HVQCCN	RECTANGULAR	UNSPECIFIED	YES	1		CMOS	AEC-Q100	8		3			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				.5 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	MATTE TIN	QUAD		R-XQCC-N16	1	6 V	1 mm	2.5 mm		TRUE	2 V			e3	30	260	3.5 mm	HC/UH
NLV14021BDR2G	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	4000000 Hz	CMOS	AEC-Q100	8		5	5/15		SMALL OUTLINE	SOP16,.25	800 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL		R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V			e3	30	260	9.9 mm	4000/14000/40000
MC100E241FNG	Onsemi	PARALLEL IN PARALLEL OUT	MILITARY	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	700000000 Hz	ECL		8		5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.975 ns	Shift Registers	1.27 mm	125 Cel	RIGHT	OPEN-EMITTER	POSITIVE EDGE	-55 Cel	TIN	QUAD	700 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE	e3		260	11.505 mm	100E
MC10E445FNR2	Onsemi	SERIAL IN PARALLEL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		4		5			CHIP CARRIER		2.1 ns		1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	2000 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2 TO -5.7V	e0		235	11.505 mm	10E
MC10E445FNG	Onsemi	SERIAL IN PARALLEL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		4		5			CHIP CARRIER		2.1 ns		1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	2000 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2 TO -5.7V	e3		260	11.505 mm	10E
NLV74VHC594DTR2G	Onsemi	SERIAL IN PARALLEL OUT
MC10141L	Onsemi	PARALLEL IN PARALLEL OUT	OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	150000000 Hz	ECL		4			-5.2		IN-LINE	DIP16,.3	3.8 ns	Shift Registers	2.54 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-30 Cel	TIN LEAD	DUAL	150 MHz	R-GDIP-T16			5.08 mm	7.62 mm	Not Qualified	TRUE				e0			19.49 mm	10K
NLV74HC164BDTR2G	Onsemi	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8		3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL		R-PDSO-G14		6 V	1.2 mm	4.4 mm		TRUE	2 V				NOT SPECIFIED	NOT SPECIFIED	5 mm	HC/UH
MC100EP445MNG	Onsemi	SERIAL IN PARALLEL OUT	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1		ECL		8		3.3			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.795 ns		.5 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	2800 MHz	S-PQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	5 mm	100E
MC10E141FN	Onsemi	PARALLEL IN PARALLEL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	700000000 Hz	ECL		8		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.975 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	700 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE	e0		235	11.505 mm	10E
NLV14517BDWR2G	Onsemi	SERIAL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	1500000 Hz	CMOS	AEC-Q100	64	TR	5	5/15	50 pF	SMALL OUTLINE	SOP16,.4	770 ns	Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL	5.3 MHz	R-PDSO-G16	3	18 V	2.65 mm	7.5 mm	Not Qualified	TRUE	3 V		16-BIT, 32-BIT AND 48-BIT OUTPUT ALSO AVAILABLE	e3	30	260	10.3 mm	4000/14000/40000
MC10E142FNR2G	Onsemi	PARALLEL IN PARALLEL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	700000000 Hz	ECL		9		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	1 ns	Shift Registers	1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE	e3		260	11.505 mm	10E
NLVHC4094BDTR2G	Onsemi	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	4000000 Hz	CMOS	AEC-Q100	8	TR	3		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	170 ns		.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	35 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm		TRUE	2 V	.04 mA		e4	30	260	5 mm	HC/UH
MC10141FN	Onsemi	PARALLEL IN PARALLEL OUT	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	150000000 Hz	ECL		4			-5.2		CHIP CARRIER	LDCC20,.4SQ	3.8 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-30 Cel	Tin/Lead (Sn80Pb20)	QUAD	150 MHz	S-PQCC-J20	1		4.57 mm	8.965 mm	Not Qualified	TRUE				e0			8.965 mm	10K
MC100EP446MNG	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE	PLASTIC/EPOXY	YES	1		ECL		8		3.3			CHIP CARRIER, VERY THIN PROFILE		1.025 ns		.5 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	MATTE TIN	QUAD	3200 MHz	S-PQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	5 mm	100E
MC10141FNR2	Onsemi	PARALLEL IN PARALLEL OUT	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		4					CHIP CARRIER		3.8 ns		1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-30 Cel	TIN LEAD	QUAD	150 MHz	S-PQCC-J20			4.57 mm	8.965 mm	Not Qualified	TRUE				e0			8.965 mm	10K
MC100E445FNR2	Onsemi	SERIAL IN PARALLEL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		4		5			CHIP CARRIER		2.1 ns		1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	2000 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2 TO -5.7V	e0		235	11.505 mm	100E
100336QIX	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	NO LEAD	28	QCCN	SQUARE	PLASTIC/EPOXY	YES	1		ECL		4					CHIP CARRIER		1.8 ns		1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel		QUAD	350 MHz	S-PQCC-N28			4.57 mm	11.43 mm		COMPLEMENTARY			CAN ALSO BE OPERATED AS A COUNTER				11.43 mm	100K
NLV14015BDR2G	Onsemi	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	1500000 Hz	CMOS	AEC-Q100	4		5	5/15		SMALL OUTLINE	SOP16,.25	750 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL		R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V			e3	30	260	9.9 mm	4000/14000/40000
MC100EP445MNR4G	Onsemi	SERIAL IN PARALLEL OUT	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1		ECL		8		3.3			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.795 ns		.5 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN	QUAD	2800 MHz	S-PQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	5 mm	100E
NLV74HC164BDR2G	Onsemi	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8		3			SMALL OUTLINE				1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL		R-PDSO-G14		6 V	1.75 mm	3.9 mm		TRUE	2 V				NOT SPECIFIED	NOT SPECIFIED	8.65 mm	HC/UH
MC100EP142FA	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		9		3.3	+-3.3/+-5		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.8 ns	Shift Registers	.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	3000 MHz	S-PQFP-G32		5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE	e0		235	7 mm	100E
MC100EP446FAR2G	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.025 ns		.8 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	TIN	QUAD	3200 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	7 mm	100E
100336SC	Onsemi	PARALLEL IN SERIAL OUT	OTHER	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		ECL		4					SMALL OUTLINE		1.8 ns		1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		DUAL	350 MHz	R-PDSO-G24			2.65 mm	7.5 mm		COMPLEMENTARY			CAN ALSO BE OPERATED AS A COUNTER				15.4 mm	100K
MC10EP142MNG	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		9		3.3	+-3.3/+-5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.8 ns	Shift Registers	.5 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN	QUAD		S-PQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE	e3	30	260	5 mm	10E
MC100E446FN	Onsemi	PARALLEL IN SERIAL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		4		5			CHIP CARRIER		1.48 ns		1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	NEGATIVE EDGE	0 Cel	TIN LEAD	QUAD	1300 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = OV WITH VEE = -4.2V TO -5.7V; SISO OPERATION ALSO AVAILABLE	e0		235	11.505 mm	100E
MC10EP445FAG	Onsemi	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.795 ns		.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN	QUAD	2800 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	7 mm	10E
NLV74HC164ADR2G	Onsemi	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	40000000 Hz	CMOS	AEC-Q100	8		5	2/6		SMALL OUTLINE	SOP14,.25		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL		R-PDSO-G14	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V			e3	30	260	8.65 mm	HC/UH
MC10E142FNR2	Onsemi	PARALLEL IN PARALLEL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	700000000 Hz	ECL		9		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	1 ns	Shift Registers	1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	700 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE	e0		235	11.505 mm	10E
MC10E241FNR2	Onsemi	PARALLEL IN PARALLEL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	700000000 Hz	ECL		8		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.975 ns	Shift Registers	1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	700 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: 0V VCC WITH VEE = -4.2V TO -5.7V	e0			11.505 mm	10E
MC100E446FNR2G	Onsemi	PARALLEL IN SERIAL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		4		5			CHIP CARRIER		1.48 ns		1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	NEGATIVE EDGE	0 Cel	TIN	QUAD	1300 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = OV WITH VEE = -4.2V TO -5.7V; SISO OPERATION ALSO AVAILABLE	e3		260	11.505 mm	100E
MC100EP445FA	Onsemi	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.795 ns		.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	2500 MHz	S-PQFP-G32		5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	7 mm	100E
MC10EP446MNR4G	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE	PLASTIC/EPOXY	YES	1		ECL		8		3.3			CHIP CARRIER, VERY THIN PROFILE		1.025 ns		.5 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	TIN	QUAD	3200 MHz	S-PQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	5 mm	10E
NLV74HC595AMNTWG	Onsemi	SERIAL IN PARALLEL OUT	MILITARY	NO LEAD	16	HVQCCN	RECTANGULAR	UNSPECIFIED	YES	1		CMOS	AEC-Q100	8		5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		210 ns		.5 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	MATTE TIN	QUAD		R-XQCC-N16	1	6 V	1 mm	2.5 mm		TRUE	2 V			e3	30	260	3.5 mm	HC/UH
MC10H141P	Onsemi	PARALLEL IN PARALLEL OUT	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	250000000 Hz	ECL		4					IN-LINE	DIP16,.3	2 ns	Shift Registers	2.54 mm	75 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel	Tin/Lead (Sn80Pb20)	DUAL	250 MHz	R-PDIP-T16			4.44 mm	7.62 mm	Not Qualified	TRUE				e0	30	235	19.175 mm	10H
NLV14094BDG	Onsemi	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	1250000 Hz	CMOS		8	TUBE	5		50 pF	SMALL OUTLINE	SOP16,.3	840 ns		1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL	3 MHz	R-PDSO-G16	1	15 V	2.05 mm	5.27 mm		TRUE	5 V	.0006 mA		e3	30	260	10.3 mm	4000/14000/40000
MC10H141PG	Onsemi	PARALLEL IN PARALLEL OUT	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	250000000 Hz	ECL		4					IN-LINE	DIP16,.3	2 ns	Shift Registers	2.54 mm	75 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel	TIN	DUAL	250 MHz	R-PDIP-T16			4.44 mm	7.62 mm	Not Qualified	TRUE				e3		260	19.175 mm	10H
MC10H141FN	Onsemi	PARALLEL IN PARALLEL OUT	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL		4					CHIP CARRIER	LDCC20,.4SQ	2 ns	Shift Registers	1.27 mm	75 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	250 MHz	S-PQCC-J20	1		4.57 mm	8.965 mm	Not Qualified	TRUE				e0		235	8.965 mm	10H
MC100EP445FAR2	Onsemi	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.795 ns		.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	2800 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	7 mm	100E
MC100E142FNR2G	Onsemi	PARALLEL IN PARALLEL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	700000000 Hz	ECL		9		5	-4.5		CHIP CARRIER	LDCC28,.5SQ	1 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE	e3		260	11.505 mm	100E
MC10EP142FA	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		9		3.3	+-3.3/+-5		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.8 ns	Shift Registers	.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	3000 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE	e0		235	7 mm	10E
MC100EP446MNR4G	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE	PLASTIC/EPOXY	YES	1		ECL		8		3.3			CHIP CARRIER, VERY THIN PROFILE		1.025 ns		.5 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	TIN	QUAD	3200 MHz	S-PQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	5 mm	100E
MC10E142FNG	Onsemi	PARALLEL IN PARALLEL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	700000000 Hz	ECL		9		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	1 ns	Shift Registers	1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE	e3		260	11.505 mm	10E
MC10EP445FA	Onsemi	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.795 ns		.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	2800 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	7 mm	10E

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.