Digital Shift Registers

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
BU4094BCF	ROHM	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY		YES	1		CMOS		8		5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	840 ns		Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	TIN COPPER	DUAL	3 MHz	R-PDSO-G16		18 V	1.71 mm	4.4 mm	Not Qualified	TRUE	3 V		COMPLIMENTARY SERIAL OUTPUT ALSO AVAILABLE	e2		260	10 mm	4000/14000/40000
CD74AC299M	Texas Instruments	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY		YES	1	95000000 Hz	CMOS		8		3.3	3.3/5		SMALL OUTLINE	SOP20,.4	147 ns		Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	108 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	1.5 V		HOLD MODE; COMMON I/O PINS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	AC
DM8300N	National Semiconductor		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY		NO	1	30000000 Hz	TTL		4		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL			0 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T16					Not Qualified					e0
DM8570N	National Semiconductor		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY		NO	1	25000000 Hz	TTL		8		5	5		IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel	RIGHT			0 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T14					Not Qualified					e0
HCTS164KMSR	Renesas Electronics	SERIAL IN PARALLEL OUT	MILITARY	FLAT	14	DFP	RECTANGULAR	100k Rad(Si)	CERAMIC, METAL-SEALED COFIRED		YES	1		CMOS	MIL-PRF-38535 Class V	8		5			FLATPACK		40 ns			1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	GOLD	DUAL		R-CDFP-F14		5.5 V	2.92 mm	6.285 mm	Not Qualified	TRUE	4.5 V		RADIATION HARD CMOS/SILICON ON SAPPHIRE (SOS) TECHNOLOGY	e4				HCT
JM38510/00904BFA	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED		YES	1		TTL		8		5		15 pF	FLATPACK		31 ns			1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	26 MHz	R-GDFP-F16		5.5 V	2.03 mm	6.73 mm	Not Qualified	COMPLEMENTARY	4.5 V	63 mA	CLOCK INHIBIT				10.2 mm	TTL/H/L
MC10H141L	Onsemi	PARALLEL IN PARALLEL OUT	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED		NO	1	250000000 Hz	ECL		4					IN-LINE	DIP16,.3	2 ns		Shift Registers	2.54 mm	75 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel	TIN LEAD	DUAL	250 MHz	R-GDIP-T16			5.08 mm	7.62 mm	Not Qualified	TRUE				e0			19.49 mm	10H
MC14517BCL	Motorola	SERIAL IN SERIAL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED		NO	2	1500000 Hz	CMOS		64		5	5/15	50 pF	IN-LINE	DIP16,.3	770 ns		Shift Registers	2.54 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	1.5 MHz	R-GDIP-T16		18 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V		OUTPUTS ALSO AVAILABLE AT 16TH, 32ND AND 48TH STAGE OF THE SHIFT REGISTER	e0			19.495 mm	4000/14000/40000
MC54F164J	Motorola	SERIAL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED		NO	1	70000000 Hz	TTL		8		5	5	50 pF	IN-LINE	DIP14,.3	13 ns		Shift Registers	2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	70 MHz	R-GDIP-T14		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	55 mA		e0			19.495 mm	F/FAST
MC74HC597ADG	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY		YES	1	40000000 Hz	CMOS		8		3	2/6		SMALL OUTLINE	SOP16,.25	275 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL	40 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V			e3	30	260	9.9 mm	HC/UH
TC74VHC595FN	Toshiba	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY		YES	1	50000000 Hz	CMOS		8		3.3	2/5.5	50 pF	SMALL OUTLINE	SOP16,.25	18.5 ns		Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	115 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		NOT AVAILABLE IN JAPAN		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	AHC/VHC
CD4015BM	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	NO	YES	2	3000000 Hz	CMOS		4	TUBE	5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	320 ns	4.2 Amp	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	8.5 MHz	R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V	3 mA	INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER	e4	30	260	9.9 mm	4000/14000/40000
SN54LS95BJ	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED		NO	1	25000000 Hz	TTL		4		5	5	15 pF	IN-LINE	DIP14,.3	32 ns		Shift Registers	2.54 mm	125 Cel	RIGHT		NEGATIVE EDGE	-55 Cel		DUAL	36 MHz	R-GDIP-T14		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	21 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	LS
7702501EA	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	NO	1	830000 Hz	CMOS	MIL-PRF-38535	8	TUBE	5	3/18	50 pF	IN-LINE	DIP16,.3	900 ns	4.2 Amp	Shift Register	2.54 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	Tin/Lead (Sn/Pb)	DUAL	2 MHz	R-GDIP-T16		18 V	5.08 mm	7.62 mm	Qualified	TRUE	3 V	3 mA	COMPLIMENTARY SERIAL OUTPUT ALSO AVAILABLE	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm	4000/14000/40000
SNJ54199W-10	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	24	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED		YES	1		TTL		8		5		15 pF	FLATPACK		30 ns			1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	35 MHz	R-GDFP-F24		5.5 V	2.29 mm	9.09 mm	Not Qualified	TRUE	4.5 V	127 mA	CLOCK INHIBIT				14.36 mm	TTL/H/L
7802401RA	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	NO	1	12000000 Hz	TTL	MIL-STD-883	8	TUBE	5	5	45 pF	IN-LINE	DIP20,.3	39 ns	24 Amp	Shift Register	2.54 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel	Tin/Lead (Sn/Pb)	DUAL	25 MHz	R-GDIP-T20		5.25 V	5.08 mm	7.62 mm	Qualified	TRUE	4.75 V	53 mA	HOLD MODE; COMMON I/O PINS	e0	NOT SPECIFIED	NOT SPECIFIED	24.195 mm	LS
SN54HC594FK	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED		YES	1	17000000 Hz	CMOS		8		5	2/6	50 pF	CHIP CARRIER	LCC20,.35SQ	300 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		QUAD	20 MHz	S-CQCC-N20		6 V	2.03 mm	8.89 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	HC/UH
TMS3139JC	Texas Instruments		OTHER	THROUGH-HOLE	24	DIP	RECTANGULAR		CERAMIC		NO	9	1500000 Hz	MOS		132			5,-12		IN-LINE	DIP24,.6			Shift Registers	2.54 mm	85 Cel				-25 Cel		DUAL		R-XDIP-T24					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN54LS672J	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR		CERAMIC, METAL-SEALED COFIRED		NO	1		TTL		4		5		15 pF	IN-LINE	DIP20,.3	25 ns		Shift Registers	2.54 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel		DUAL		R-CDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	70 mA	MUXED REGISTERED/STANDARD PARALLEL OUTPUTS		NOT SPECIFIED	NOT SPECIFIED	24.195 mm	LS
SNJ54LS194AFK	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED		YES	1	25000000 Hz	TTL	MIL-PRF-38535	4		5	5	15 pF	CHIP CARRIER	LCC20,.35SQ	26 ns		Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		QUAD	25 MHz	S-CQCC-N20		5.5 V	2.03 mm	8.89 mm	Not Qualified	TRUE	4.5 V	23 mA	HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	LS
5962-00-626-1480	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC		NO	1		TTL		8		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-XDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
TMS3132NC	Texas Instruments		OTHER	THROUGH-HOLE	8	DIP	RECTANGULAR		PLASTIC/EPOXY		NO	2		MOS		144					IN-LINE	DIP8,.3			Shift Registers	2.54 mm	85 Cel				-25 Cel		DUAL		R-PDIP-T8					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
5962-01-050-4063	Texas Instruments		OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC		NO	4		MOS		64					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	85 Cel				-25 Cel		DUAL		R-XDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SNC54ALS165J	Texas Instruments		MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC		NO	1		TTL	MIL-STD-883 Class B (Modified)	8		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	125 Cel				-55 Cel		DUAL		R-XDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN54HC195FK	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED		YES	1	21000000 Hz	CMOS		4		5	2/6		CHIP CARRIER	LCC20,.35SQ	220 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		QUAD	60 MHz	S-CQCC-N20		6 V	2.03 mm	8.89 mm	Not Qualified	TRUE	2 V		COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	HC/UH
SNJ54LS299J	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	NO	1	20000000 Hz	TTL	MIL-PRF-38535	8	TUBE	5	5	15 pF	IN-LINE	DIP20,.3	39 ns	24 Amp	Shift Registers	2.54 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel	Tin/Lead (Sn/Pb)	DUAL	25 MHz	R-GDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	53 mA	HOLD MODE	e0	NOT SPECIFIED	NOT SPECIFIED	24.195 mm	LS
MM54C95J/883B	Texas Instruments		MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC		NO	1		CMOS	38535Q/M;38534H;883B	4					IN-LINE	DIP14,.3			Shift Registers	2.54 mm	125 Cel	RIGHT			-55 Cel	Tin/Lead (Sn/Pb)	DUAL		R-XDIP-T14					Not Qualified					e0
SN54AS323FH-00	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED		YES	1		TTL		8		5			CHIP CARRIER					1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel		QUAD		S-CQCC-N20		5.5 V	2.54 mm	8.89 mm	Not Qualified	TRUE	4.5 V	38 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL				8.89 mm	AS
SNC54179W	Texas Instruments		MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC		YES	1		TTL	MIL-STD-883 Class B (Modified)	4		5	5		FLATPACK	FL16,.3			Shift Registers	1.27 mm	125 Cel	RIGHT			-55 Cel		DUAL		R-XDFP-F16					Not Qualified
SNC5491AW	Texas Instruments		MILITARY	FLAT	14	DFP	RECTANGULAR		CERAMIC		YES	1		TTL	MIL-STD-883 Class B (Modified)	8		5	5		FLATPACK	FL14,.3			Shift Registers	1.27 mm	125 Cel	RIGHT			-55 Cel		DUAL		R-XDFP-F14					Not Qualified
TMS3402NC	Texas Instruments		OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY		NO	1		MOS		500					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	85 Cel				-25 Cel		DUAL		R-PDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SNJ54L95T-10	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	14	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED		YES	1		TTL		4		5		50 pF	FLATPACK		200 ns				125 Cel	RIGHT		NEGATIVE EDGE	-55 Cel		DUAL	5 MHz	R-GDFP-F14		5.5 V			Not Qualified	TRUE	4.5 V	9 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD					TTL/H/L
SNC74LS299J	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED		NO	1		TTL		8		5			IN-LINE		39 ns			2.54 mm	70 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	0 Cel		DUAL	20 MHz	R-GDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V		HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL				24.195 mm	LS
54F194DM	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED		NO	1		TTL		4		5			IN-LINE		8.5 ns			2.54 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	90 MHz	R-GDIP-T16		5.5 V	5.08 mm	7.62 mm		TRUE	4.5 V		LG_MAX				19.94 mm	F/FAST
TMS3102NC	Texas Instruments		OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY		NO	2		MOS		80					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	85 Cel				-25 Cel		DUAL		R-PDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SNJ54LS322AJ	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR		CERAMIC, METAL-SEALED COFIRED		NO	1	20000000 Hz	TTL	38535Q/M;38534H;883B	8		5	5	15 pF	IN-LINE	DIP20,.3	35 ns		Shift Registers	2.54 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel		DUAL	35 MHz	R-CDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	60 mA	COMMON I/O PINS; SIGN EXTEND FUNCTION; TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT		NOT SPECIFIED	NOT SPECIFIED	24.195 mm	LS
JM38510/30602BFA	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED		YES	1		TTL	MIL-M-38510 Class B	4		5			FLATPACK		26 ns			1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	30 MHz	R-GDFP-F16		5.5 V	2.03 mm	6.73 mm	Not Qualified	TRUE	4.5 V		COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND K(BAR) SERIAL INPUT				10.16 mm	LS
DM2503W	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED		YES	1				8		5			FLATPACK		28 ns			1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	15 MHz	R-GDFP-F16		5.5 V	2.032 mm	6.604 mm		TRUE	4.5 V						9.6645 mm	2503
TMS3132LC	Texas Instruments		OTHER	WIRE	8		ROUND		METAL			2		MOS		144					CYLINDRICAL	CAN8,.2			Shift Registers		85 Cel				-25 Cel		BOTTOM		O-MBCY-W8					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
5962-01-067-3073	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY		NO	1	30000000 Hz	TTL		4		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL			0 Cel		DUAL		R-PDIP-T16					Not Qualified
74F164ALMQB	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED		YES	1		TTL		8		5			CHIP CARRIER		8 ns			1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		QUAD	80 MHz	S-CQCC-N20		5.5 V	1.905 mm	8.89 mm		TRUE	4.5 V						8.89 mm	F/FAST
83021022X	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED		YES	1		TTL		8		5			CHIP CARRIER		25 ns			1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel		QUAD	17 MHz	S-CQCC-N20	NOT APPLICABLE	5.5 V	2.03 mm	8.89 mm	Not Qualified	TRUE	4.5 V				NOT APPLICABLE	NOT APPLICABLE	8.89 mm	ALS
DM2502CJ	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED		NO	1				8		5			IN-LINE		28 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	15 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm		TRUE	4.75 V		LG_MAX				19.94 mm	2502
SNC54LS95BJ	Texas Instruments		MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC		NO	1		TTL	MIL-STD-883 Class B (Modified)	4		5	5		IN-LINE	DIP14,.3			Shift Registers	2.54 mm	125 Cel	BIDIRECTIONAL			-55 Cel		DUAL		R-XDIP-T14					Not Qualified
SNJ54178W-00	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	14	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED		YES	1		TTL		4		5		15 pF	FLATPACK		35 ns			1.27 mm	125 Cel	RIGHT		NEGATIVE EDGE	-55 Cel		DUAL	39 MHz	R-GDFP-F14		5.5 V	2.03 mm	6.29 mm	Not Qualified	TRUE	4.5 V	70 mA	HOLD MODE				9.21 mm	TTL/H/L
SNJ54F323J	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR		CERAMIC, METAL-SEALED COFIRED		NO	1		TTL	38535Q/M;38534H;883B	8		5	5	50 pF	IN-LINE	DIP20,.3			Shift Registers	2.54 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel		DUAL		R-CDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	95 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	24.195 mm	F/FAST
SN54HC674JT	Texas Instruments		MILITARY	THROUGH-HOLE	24	DIP	RECTANGULAR		CERAMIC		NO	1		CMOS		16					IN-LINE	DIP24,.3			Shift Registers	2.54 mm	125 Cel				-55 Cel		DUAL		R-XDIP-T24					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN54HC166W	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED		YES	1		CMOS		8		5		50 pF	FLATPACK		225 ns			1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	25 MHz	R-GDFP-F16		6 V	2.03 mm	6.73 mm	Not Qualified	TRUE	2 V		CLOCK INHIBIT				10.2 mm	HC/UH

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.