Digital Shift Registers

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN54F299J	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1	65000000 Hz	TTL		8		5	5	50 pF	IN-LINE	DIP20,.3	12.5 ns		Shift Registers	2.54 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel		DUAL	65 MHz	R-GDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	95 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL		NOT SPECIFIED	NOT SPECIFIED	24.195 mm	F/FAST
SN54199J-00	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		8		5		15 pF	IN-LINE		30 ns				125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	35 MHz	R-GDIP-T24		5.5 V			Not Qualified	TRUE	4.5 V	127 mA	CLOCK INHIBIT					TTL/H/L
SN54L164T-06	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		8		5		50 pF	FLATPACK		74 ns				125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	18 MHz	R-GDFP-F14		5.5 V			Not Qualified	TRUE	4.5 V	27 mA						TTL/H/L
8302102SX	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	20	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL	MIL-STD-883	8		5			FLATPACK		25 ns			1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel		DUAL	17 MHz	R-GDFP-F20		5.5 V	2.54 mm	6.92 mm	Qualified	TRUE	4.5 V				NOT APPLICABLE	NOT APPLICABLE	13.09 mm	ALS
5962-8860201KA	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	FLAT	24	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL	MIL-STD-883	16		5			FLATPACK	FL24,.4	40 ns		Shift Register	1.27 mm	125 Cel	RIGHT	3-STATE	NEGATIVE EDGE	-55 Cel	TIN LEAD	DUAL	20 MHz	R-GDFP-F24		5.5 V	2.29 mm	9.085 mm	Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER; COMMON SERIAL I/O PIN	e0			14.36 mm	LS
JM38510/00901BDB	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		4		5		15 pF	FLATPACK		32 ns			1.27 mm	125 Cel	RIGHT		NEGATIVE EDGE	-55 Cel		DUAL	36 MHz	R-GDFP-F14		5.5 V	2.03 mm	6.29 mm	Not Qualified	TRUE	4.5 V	63 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD				9.21 mm	TTL/H/L
5962-8682601EA	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	NO	1	20000000 Hz	CMOS	MIL-STD-883	4	TUBE	4.5	2/6	50 pF	IN-LINE	DIP16,.3	265 ns	5.2 Amp	Shift Register	2.54 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	60 MHz	R-GDIP-T16		6 V	5.08 mm	7.62 mm	Qualified	TRUE	2 V	.16 mA	HOLD MODE	e0			19.56 mm	HC
TMS3012JC	Texas Instruments		OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	2		MOS		128					IN-LINE	DIP16,.3			Shift Registers	2.54 mm	85 Cel				-55 Cel		DUAL		R-XDIP-T16					Not Qualified
SNJ54194W-00	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		4		5		15 pF	FLATPACK		26 ns			1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	36 MHz	R-GDFP-F16		5.5 V	2.03 mm	6.73 mm	Not Qualified	TRUE	4.5 V	63 mA	HOLD MODE				10.2 mm	TTL/H/L
8101701EA	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	NO	1	2000000 Hz	CMOS	MIL-STD-883	4	TUBE	5	5/15	50 pF	IN-LINE	DIP16,.3	500 ns	4.2 Amp	Shift Register	2.54 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	Tin/Lead (Sn/Pb)	DUAL	8 MHz	R-GDIP-T16		18 V	5.08 mm	7.62 mm	Qualified	CONFIGURABLE	3 V	3 mA	J AND K BAR SERIAL INPUT	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm	4000/14000/40000
SN54AS95J	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		4		5		50 pF	IN-LINE	DIP14,.3	10.5 ns		Shift Registers	2.54 mm	125 Cel	RIGHT		NEGATIVE EDGE	-55 Cel		DUAL	80 MHz	R-GDIP-T14		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	39 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	AS
SNJ54LS96FK	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED		YES	1		TTL		5		5		15 pF	CHIP CARRIER		40 ns			1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		QUAD		S-CQCC-N20		5.5 V	2.03 mm	8.89 mm	Not Qualified	TRUE	4.5 V	20 mA	CLEAR FOLLOWED BY SELECTIVE PRESET IMITATES LOAD				8.89 mm	LS
SNJ5491AW-00	Texas Instruments	SERIAL IN SERIAL OUT	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		8		5		15 pF	FLATPACK		40 ns			1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	18 MHz	R-GDFP-F14		5.5 V	2.03 mm	6.29 mm	Not Qualified	COMPLEMENTARY	4.5 V	50 mA					9.21 mm	TTL/H/L
M38510/30607BFX	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		4		5			FLATPACK		56 ns				125 Cel	RIGHT	3-STATE	NEGATIVE EDGE	-55 Cel		DUAL	20 MHz	R-GDFP-F16		5.5 V			Not Qualified	TRUE	4.5 V							LS
SNJ54L91T-03	Texas Instruments	SERIAL IN SERIAL OUT	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		8		5		50 pF	FLATPACK		150 ns				125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	6.5 MHz	R-GDFP-F14		5.5 V			Not Qualified	COMPLEMENTARY	4.5 V	6.6 mA						TTL/H/L
SNJ54ALS323J	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	NO	1	17000000 Hz	TTL	MIL-PRF-38535	8	TUBE	5	5	50 pF	IN-LINE	DIP20,.3	25 ns	24 Amp	Shift Registers	2.54 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	17 MHz	R-GDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	40 mA	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e0			24.195 mm	ALS
SN54L164T-07	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED		YES	1		TTL		8		5		50 pF	FLATPACK		74 ns				125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	18 MHz	R-GDFP-F14		5.5 V			Not Qualified	TRUE	4.5 V	27 mA						TTL/H/L
SN74LV594ADB	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		8		2.5			SMALL OUTLINE, SHRINK PITCH		18.6 ns			.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V			e4			6.2 mm	LV/LV-A/LVX/H
SN7496JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		TTL		5		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel	RIGHT			0 Cel		DUAL		R-XDIP-T16
SN74HC165QPWRQ1	Texas Instruments	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	25000000 Hz	CMOS	AEC-Q100	8	TR	5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	225 ns	5.2 Amp	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V	.16 mA	SISO OPERATION ALSO AVAIALABLE	e4	NOT SPECIFIED	260	5 mm	HC/UH
SN74LV165APWLE	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	CMOS		8		2.5	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	26 ns		Shift Registers	.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G16		5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V		CLOCK INHIBIT		NOT SPECIFIED	NOT SPECIFIED	5 mm	LV/LV-A/LVX/H
SN74AHCT594DG4	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	95000000 Hz	CMOS		8	TUBE	5	5	50 pF	SMALL OUTLINE	SOP16,.25	10.1 ns	8 Amp	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	.02 mA	PARALLEL OUTPUT IS REGISTERED	e4	30	260	9.9 mm	AHCT/VHCT/VT
SN74AS323NP1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8					IN-LINE	DIP20,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74AHCT595DBLE	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	85000000 Hz	CMOS		8		5	5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	11.4 ns		Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	115 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED		NOT SPECIFIED	NOT SPECIFIED	6.2 mm	AHCT/VHCT
SN74HC165N-10	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		8		5		50 pF	IN-LINE		38 ns			2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V		CLOCK INHIBIT				19.305 mm	HC/UH
SN74LS598DWRE4	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5		45 pF	SMALL OUTLINE		28 ns			1.27 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	35 MHz	R-PDSO-G20	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	80 mA	COMMON I/O PINS; MUXED SERIAL INPUTS; TOTEMPOLE SERIAL OUTPUT	e4			12.8 mm	LS
SN74LS595N3	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5	5	30 pF	IN-LINE	DIP16,.3	25 ns		Shift Registers	2.54 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE	0 Cel		DUAL	20 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	65 mA	PARALLEL OUTPUT IS REGISTERED		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	LS
SN74LS166N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T16											NOT SPECIFIED	NOT SPECIFIED
SN74LS95BJP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC		NO	1		TTL		4		5	5		IN-LINE	DIP14,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-XDIP-T14
SN74AS95FN	Texas Instruments		COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL		4					CHIP CARRIER	LDCC20,.4SQ			Shift Registers	1.27 mm	70 Cel	BIDIRECTIONAL			0 Cel		QUAD		S-PQCC-J20					Not Qualified
TPIC6B596DW	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	10000000 Hz			8	TUBE	5	5	30 pF	SMALL OUTLINE	SOP20,.4			Shift Registers	1.27 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	10 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4	30	260	12.8 mm	6B
CD4014BH	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	NO LEAD	16	DIE	RECTANGULAR	UNSPECIFIED		YES	1		CMOS		8		5			UNCASED CHIP		320 ns				125 Cel	RIGHT			-55 Cel		UPPER	8.5 MHz	R-XUUC-N16		18 V			Not Qualified	TRUE	3 V		OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER ;ALSO OPERATES AS SISO					4000/14000/40000
CD4015MJ/883	Texas Instruments		MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	2		CMOS	38535Q/M;38534H;883B	4			3/15		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	125 Cel	RIGHT			-55 Cel	Tin/Lead (Sn/Pb)	DUAL		R-XDIP-T16					Not Qualified					e0
SN74ALS963DW	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5		50 pF	SMALL OUTLINE	SOP20,.4			Shift Registers	1.27 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE	0 Cel		DUAL	30 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V		PARALLEL OUTPUT IS REGISTERED; DUAL RANK SHIFT REGISTER		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	ALS
CD4021BD	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1	3000000 Hz	CMOS		8		5	5/15		IN-LINE	DIP16,.3	320 ns		Shift Registers	2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	8.5 MHz	R-GDIP-T16		18 V			Not Qualified	TRUE	3 V		OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER					4000/14000/40000
SN74LS596D	Texas Instruments	SERIAL IN PARALLEL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5			SMALL OUTLINE		30 ns			1.27 mm	70 Cel	RIGHT	OPEN-COLLECTOR	POSITIVE EDGE	0 Cel		DUAL	20 MHz	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT				9.9 mm	LS
SN74LS672N1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		4					IN-LINE	DIP20,.3			Shift Registers	2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74194JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		TTL		4		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL			0 Cel		DUAL		R-XDIP-T16
MM74HC299N/A+	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		8			2/6		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T20										e0
SN74HC673NT	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		16					IN-LINE	DIP24,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-PDIP-T24					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74194NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		4		5	5		IN-LINE	DIP16,.3			Shift Registers	2.54 mm	70 Cel	BIDIRECTIONAL			0 Cel		DUAL		R-PDIP-T16
SN74HCS166DR	Texas Instruments	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1	155000000 Hz	CMOS		8	TR	5		50 pF	SMALL OUTLINE	SOP16,.25	40 ns	7.8 Amp		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm		TRUE	2 V	.002 mA		e4	30	260	9.9 mm	HC
SN74LS670FN3	Texas Instruments																																												NOT SPECIFIED	NOT SPECIFIED
SN74LV165AMPWREP	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	35000000 Hz	CMOS		8	TR	2.5	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	26 ns	12 Amp	Shift Register	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	75 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V	.02 mA	SISO OPERATION ALSO AVAILABLE	e4	30	260	5 mm	LV/LV-A/LVX/H
SN74AHC165DBLE	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		8					SMALL OUTLINE, SHRINK PITCH					.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V						6.2 mm	AHC
SN74LS95BN-00	Texas Instruments	PARALLEL IN PARALLEL OUT	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		4		5		15 pF	IN-LINE		32 ns			2.54 mm	70 Cel	RIGHT		NEGATIVE EDGE	0 Cel		DUAL	36 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	21 mA	SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD				19.305 mm	LS
SN74HC595DW3	Texas Instruments		INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		8			2/6		SMALL OUTLINE	SOP16,.4			Shift Registers	1.27 mm	85 Cel				-40 Cel		DUAL		R-PDSO-G16											NOT SPECIFIED	NOT SPECIFIED
SN74HC322NP1	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		8			2/6		IN-LINE	DIP20,.3			Shift Registers	2.54 mm	85 Cel				-40 Cel		DUAL		R-PDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.