20 Latches & Flip-Flops 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74LS398J-00	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		TTL		4		5		15 pF	IN-LINE		32 ns			2.54 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL		R-GDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	13 mA	FOUR 2:1 MUX FOLLOWED BY REGISTER				24.195 mm	LS
SN74276J4	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	4		TTL							IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel		NEGATIVE EDGE	0 Cel		DUAL		R-XDIP-T20
SN74ALS534DWP3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8		TTL				5	5		SMALL OUTLINE	SOP20,.4			FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-PDSO-G20
SN74AHCT273PWLE	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	45000000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	11 ns	8 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	65 MHz	R-PDSO-G20		5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	4.5 V				NOT SPECIFIED	NOT SPECIFIED	6.5 mm	AHCT/VHCT
CD74HC273MG4	Texas Instruments	D FLIP-FLOP	MILITARY	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	TUBE	4.5	2/6	50 pF	SMALL OUTLINE	SOP20,.4	225 ns	5.2 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	23 MHz	R-PDSO-G20	1	6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V	.16 mA		e4	NOT SPECIFIED	260	12.8 mm	HC/UH
5962-9853001QSX	Texas Instruments	D FLIP-FLOP	MILITARY	FLAT	20	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	1		CMOS	MIL-PRF-38535 Class Q	8		3.3		50 pF	FLATPACK		19.5 ns	8 Amp		1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel		DUAL	100 MHz	R-GDFP-F20		5.5 V	2.54 mm	6.92 mm	Qualified	TRUE	2 V				NOT SPECIFIED	NOT SPECIFIED	13.09 mm	AHC
SN74F273DW	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL		8		5			SMALL OUTLINE					1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL		R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	88 mA					12.8 mm	F/FAST
SN74LS74AFN	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL		1		5	5	15 pF	CHIP CARRIER	LDCC20,.4SQ	40 ns		FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD	25 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.75 V	8 mA			NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
SN74AS4374AN	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	8		TTL				5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-PDIP-T20					Not Qualified
5962-01-329-9262	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	8		TTL				5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-XDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74HCT273DWE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	TUBE	5	5	50 pF	SMALL OUTLINE	SOP20,.4	42 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	23 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	NOT SPECIFIED	260	12.8 mm	HCT
SN74ABT377ANE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	150000000 Hz	BICMOS		8		5	5	50 pF	IN-LINE	DIP20,.3	7.3 ns	64 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	30 mA	WITH HOLD MODE	e4			24.325 mm	ABT
SN74HCT533NP3	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		8		5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDIP-T20
SN74LS114AFN	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL		2		5	5	15 pF	CHIP CARRIER	LDCC20,.4SQ	20 ns		FF/Latches	1.27 mm	70 Cel		NEGATIVE EDGE	0 Cel		QUAD	30 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.75 V	6 mA	WITH INDIVIDUAL SET INPUTS		NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
SN74HC273NP3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	8		CMOS					2/6		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T20
SN74ABT377N	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	150000000 Hz	BICMOS		8	TUBE	5	5	50 pF	IN-LINE	DIP20,.3	7.3 ns	64 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	150 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	30 mA	WITH HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	24.325 mm	ABT
5962-8409901VRX	Texas Instruments	D FLIP-FLOP	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		CMOS	MIL-PRF-38535 Class V	8		5			IN-LINE		240 ns			2.54 mm	125 Cel		POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	21 MHz	R-GDIP-T20		6 V	5.08 mm	7.62 mm	Qualified	TRUE	2 V			e0	NOT SPECIFIED	NOT SPECIFIED		HC
5962-01-180-1270	Texas Instruments	D FLIP-FLOP	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	8		TTL	38535Q/M;38534H;883B			5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	125 Cel	3-STATE	POSITIVE EDGE	-55 Cel		DUAL		R-XDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74LS374FN3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	8		TTL				5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20
SN74ALS533FN3	Texas Instruments	D LATCH	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL		8		5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel	3-STATE		0 Cel		QUAD		S-PQCC-J20
SN74LV273ANS	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	45000000 Hz	CMOS		8		2.5	3.3	50 pF	SMALL OUTLINE	SOP20,.3	25 ns	6 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V			e4	30	260	12.6 mm	LV/LV-A/LVX/H
SN74ABT273DWG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	BICMOS		8	TUBE	5	5		SMALL OUTLINE	SOP20,.4	7.3 ns	64 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	30 mA		e4	30	260	12.8 mm	ABT
SN74AS573J4	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	1		TTL		8		5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE		0 Cel		DUAL		R-XDIP-T20
SN74ALS576ANP3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	8		TTL				5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-PDIP-T20
SN74ALS573BDW3	Texas Instruments	D LATCH	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL		8		5	5		SMALL OUTLINE	SOP20,.4			FF/Latches	1.27 mm	70 Cel	3-STATE		0 Cel		DUAL		R-PDSO-G20
SN74LS374NP3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	8		TTL				5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-PDIP-T20
5962-9862701Q2X	Texas Instruments	D FLIP-FLOP	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	2		TTL	MIL-PRF-38535	1		5			CHIP CARRIER		10.5 ns			1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel		QUAD	90 MHz	S-CQCC-N20		5.5 V	2.03 mm	8.89 mm	Not Qualified	COMPLEMENTARY	4.5 V						8.89 mm	AS
5962-89925012A	Texas Instruments	D FLIP-FLOP	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	1	30000000 Hz	TTL	MIL-STD-883	6		5	5		CHIP CARRIER	LCC20,.35SQ	42 ns	4 Amp	FF/Latch	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	TIN LEAD	QUAD	30 MHz	S-CQCC-N20		5.5 V			Qualified	TRUE	4.5 V	22 mA	WITH HOLD MODE	e0				LS
SN74LS364N1	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	8		TTL				5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-PDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
5962-9221903M2A	Texas Instruments	D FLIP-FLOP	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	1	71400000 Hz	CMOS	MIL-STD-883	8	TUBE	5	5	50 pF	CHIP CARRIER	LCC20,.35SQ	5.5 ns	32 Amp	FF/Latch	1.27 mm	125 Cel	3-STATE	POSITIVE EDGE	-55 Cel	TIN LEAD	QUAD		S-CQCC-N20		5.5 V	2.03 mm	8.89 mm	Qualified	TRUE	4.5 V		WITH HOLD MODE	e0			8.89 mm	FCT
SN74AS373DW3	Texas Instruments	D LATCH	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL		8		5	5		SMALL OUTLINE	SOP20,.4		48 Amp	FF/Latches	1.27 mm	70 Cel	3-STATE		0 Cel		DUAL		R-PDSO-G20								100 mA
SN74HCT373N1	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		8		5	5		IN-LINE	DIP20,.3		6 Amp	FF/Latches	2.54 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDIP-T20					Not Qualified
SN74ABT377ANSRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	BICMOS		8	TR	5	5		SMALL OUTLINE	SOP20,.3	7.3 ns	64 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	30 mA	WITH HOLD MODE	e4	30	260	12.6 mm	ABT
SN74LV273ANSR	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	45000000 Hz	CMOS		8	TR, 13 INCH	3.3	3.3	50 pF	SMALL OUTLINE	SOP20,.3	27 ns	12 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V	.02 mA		e4	30	260	12.6 mm	LV/LV-A/LVX/H
5962-9758001Q2A	Texas Instruments	J-KBAR FLIP-FLOP	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	2	70000000 Hz	TTL	MIL-PRF-38535 Class Q	2	TUBE	5	5	50 pF	CHIP CARRIER	LCC20,.35SQ	10.5 ns	20 Amp	FF/Latch	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	TIN LEAD	QUAD	70 MHz	S-CQCC-N20		5.5 V	2.03 mm	8.89 mm	Qualified	COMPLEMENTARY	4.5 V	17 mA		e0			8.89 mm	F/FAST
SN74F273N-10	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL		8		5			IN-LINE					2.54 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL	145 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V						24.325 mm	F/FAST
SN74LVTH273DWG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	BICMOS		8		3.3	3.3	50 pF	SMALL OUTLINE	SOP20,.4	5.5 ns	64 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G20	1	3.6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2.7 V	5 mA		e4	30	260	12.8 mm	LVT
5962-86825012C	Texas Instruments	D FLIP-FLOP	MILITARY		20			CERAMIC, METAL-SEALED COFIRED		1		CMOS		4		5			CHIP CARRIER		10 ns				125 Cel		POSITIVE EDGE	-55 Cel	TIN LEAD	QUAD	95 MHz			5.5 V			Not Qualified	TRUE	4.5 V		FOUR 2:1 MUX FOLLOWED BY REGISTER	e0				ACT
SN74AHCT273DGV	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25,16	11 ns			.4 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	65 MHz	R-PDSO-G20		5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	4.5 V						5 mm	AHCT/VHCT
SN74HCT563N1	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		8		5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDIP-T20					Not Qualified
SN74LS375FN3	Texas Instruments	D LATCH	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL		4		5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel			0 Cel		QUAD		S-PQCC-J20
SN74HCT563J4	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	1		CMOS		8		5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-XDIP-T20
SN74AS109FN3	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL							CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20
SN74HC563FN3	Texas Instruments	D LATCH	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		CMOS		8			2/6		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel	3-STATE		-40 Cel		QUAD		S-PQCC-J20
SN74HCT533FH	Texas Instruments	D LATCH	INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES	1		CMOS		8		5	5		CHIP CARRIER	LCC20,.35SQ			FF/Latches	1.27 mm	85 Cel	3-STATE		-40 Cel		QUAD		S-XQCC-N20					Not Qualified
SN74LS171FN	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL		4		5		15 pF	CHIP CARRIER	LDCC20,.4SQ	30 ns		FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD	20 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.75 V	25 mA			NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
5962-01-362-8093	Texas Instruments	JBAR-KBAR FLIP-FLOP	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	4		TTL							IN-LINE	DIP20,.3			FF/Latches	2.54 mm	125 Cel		NEGATIVE EDGE	-55 Cel		DUAL		R-XDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74ALS74FN-00	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL		1		5		50 pF	CHIP CARRIER		18 ns			1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD	34 MHz	S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.5 V	4 mA					8.9662 mm	ALS

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.