5 Latches & Flip-Flops 220

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74AUP1G79DCKR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	220000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	24 ns	4 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	260 MHz	R-PDSO-G5	1	3.6 V	1.1 mm	1.25 mm	Not Qualified	TRUE	.8 V	.0009 mA	e4	NOT SPECIFIED	260	2 mm	AUP/ULP/V
SN74AUP1G79DRLRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	FLAT	5	VSOF	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	FL6,.047,20	24 ns	1.7 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	260 MHz	R-PDSO-F5	1	3.6 V	.6 mm	1.2 mm	Not Qualified	TRUE	.8 V		e4	30	260	1.6 mm	AUP/ULP/V
SN74AUP1G79YEPR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	5	VFBGA	RECTANGULAR	UNSPECIFIED	YES	1		CMOS		1	TR	1.2	1.2/3.3	30 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA5,2X3,20	24 ns	1.7 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		BOTTOM	260 MHz	R-XBGA-B5		3.6 V	.5 mm	.9 mm	Not Qualified	TRUE	.8 V			NOT SPECIFIED	NOT SPECIFIED	1.4 mm	AUP/ULP/V
SN74LVC1G79QDCKRQ1	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	160000000 Hz	CMOS	AEC-Q100	1	TR	3.3		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		12 ns	32 Amp		.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Matte Tin (Sn)	DUAL	160 MHz	R-PDSO-G5	2	5.5 V	1.1 mm	1.25 mm		TRUE	1.65 V	.01 mA	e3	30	260	2 mm	LVC/LCX/Z
SN74AUC1G79DCKRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	3.9 ns	9 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	275 MHz	R-PDSO-G5	1	2.7 V	1.1 mm	1.25 mm	Not Qualified	TRUE	.8 V	.01 mA	e4	30	260	2 mm	AUC
SN74LVC1G80DCKTG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	9.9 ns	32 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	160 MHz	R-PDSO-G5	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	INVERTED	1.65 V		e4	30	260	2 mm	LVC/LCX/Z
SN74AUP1G79DCKTE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	24 ns	1.7 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	260 MHz	R-PDSO-G5	1	3.6 V	1.1 mm	1.25 mm	Not Qualified	TRUE	.8 V		e4	30	260	2 mm	AUP/ULP/V
SN74AUC1G79YEPR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	5	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	150 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA5,2X3,20	3.9 ns	5 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		BOTTOM	275 MHz	R-PBGA-B5		2.7 V	.5 mm	.9 mm	Not Qualified	TRUE	.8 V			NOT SPECIFIED	NOT SPECIFIED	1.4 mm	AUC
SN74LVC1G80QDCKRQ1	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	160000000 Hz	CMOS	AEC-Q100	1	TR	3.3		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		12.5 ns	32 Amp		.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Matte Tin (Sn)	DUAL	160 MHz	R-PDSO-G5	2	5.5 V	1.1 mm	1.25 mm		INVERTED	1.65 V	.01 mA	e3	30	260	2 mm	LVC/LCX/Z
SN74AUC1G80YEPR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	5	VFBGA	RECTANGULAR	UNSPECIFIED	YES	1	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA5,2X3,20	3.9 ns	5 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		BOTTOM	275 MHz	R-XBGA-B5		2.7 V	.5 mm	.9 mm	Not Qualified	INVERTED	.8 V			NOT SPECIFIED	NOT SPECIFIED	1.4 mm	AUC
SN74AUC1G79DCKR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	3.9 ns	9 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	275 MHz	R-PDSO-G5	1	2.7 V	1.1 mm	1.25 mm	Not Qualified	TRUE	.8 V	.01 mA	e4	NOT SPECIFIED	260	2 mm	AUC
SN74LV1G79YZPR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	5	VFBGA	RECTANGULAR	UNSPECIFIED	YES	1		CMOS		1		1.8			GRID ARRAY, VERY THIN PROFILE, FINE PITCH		9.9 ns			.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		BOTTOM	160 MHz	R-XBGA-B5		5.5 V	.5 mm	.9 mm	Not Qualified	TRUE	1.65 V					1.4 mm	LV/LV-A/LVX/H
SN74LVC1G80YZAR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	5	VFBGA	RECTANGULAR	UNSPECIFIED	YES	1		CMOS		1	TR	1.8	3.3	50 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA5,2X3,20	9.9 ns	24 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		BOTTOM	160 MHz	R-XBGA-B5		5.5 V	.5 mm	.9 mm	Not Qualified	INVERTED	1.65 V			NOT SPECIFIED	NOT SPECIFIED	1.4 mm	LVC/LCX/Z
SN74AUP1G79DCKTG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	24 ns	1.7 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	260 MHz	R-PDSO-G5	1	3.6 V	1.1 mm	1.25 mm	Not Qualified	TRUE	.8 V		e4	30	260	2 mm	AUP/ULP/V
SN74LVC1G79YZAR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	5	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	1.8	3.3	50 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA5,2X3,20	9.9 ns	24 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		BOTTOM	160 MHz	R-PBGA-B5		5.5 V	.5 mm	.9 mm	Not Qualified	TRUE	1.65 V			NOT SPECIFIED	NOT SPECIFIED	1.4 mm	LVC/LCX/Z
SN74LVC1G80YEAR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	5	VFBGA	RECTANGULAR	UNSPECIFIED	YES	1		CMOS		1	TR	1.8	3.3	50 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA5,2X3,20	9.9 ns	24 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		BOTTOM	160 MHz	R-XBGA-B5		5.5 V	.5 mm	.9 mm	Not Qualified	INVERTED	1.65 V			NOT SPECIFIED	NOT SPECIFIED	1.4 mm	LVC/LCX/Z
SN74LVC1G80DBVTG4	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	160000000 Hz	CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	9.9 ns	32 Amp	FF/Latches	.95 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	160 MHz	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	INVERTED	1.65 V	.01 mA	e4	NOT SPECIFIED	260	2.9 mm	LVC/LCX/Z
SN74AUC1G80YZAR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	5	VFBGA	RECTANGULAR	UNSPECIFIED	YES	1	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA5,2X3,20	3.9 ns	5 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		BOTTOM	275 MHz	R-XBGA-B5		2.7 V	.5 mm	.9 mm	Not Qualified	INVERTED	.8 V			NOT SPECIFIED	NOT SPECIFIED	1.4 mm	AUC
SN74AUC1G79DCKRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	3.9 ns	9 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	275 MHz	R-PDSO-G5	1	2.7 V	1.1 mm	1.25 mm	Not Qualified	TRUE	.8 V	.01 mA	e4	30	260	2 mm	AUC
SN74LVC1G79YEPR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	5	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	1.8	3.3	50 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA5,2X3,20	9.9 ns	24 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		BOTTOM	160 MHz	R-PBGA-B5		5.5 V	.5 mm	.9 mm	Not Qualified	TRUE	1.65 V			NOT SPECIFIED	NOT SPECIFIED	1.4 mm	LVC/LCX/Z
SN74AUP1G80YZPR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	5	VFBGA	RECTANGULAR	UNSPECIFIED	YES	1	260000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA5,2X3,20	28.7 ns	4 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	260 MHz	R-XBGA-B5	1	3.6 V	.5 mm	.9 mm	Not Qualified	INVERTED	.8 V	.0009 mA	e1	NOT SPECIFIED	260	1.4 mm	AUP/ULP/V
SN74ALVC1G79DCK	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		1.8	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08		24 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G5		3.6 V	1.1 mm	1.25 mm	Not Qualified	TRUE	1.65 V			NOT SPECIFIED	NOT SPECIFIED	2 mm	ALVC/VCX/A
SN74AUC1G80DCKR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	3.9 ns	9 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	275 MHz	R-PDSO-G5	1	2.7 V	1.1 mm	1.25 mm	Not Qualified	INVERTED	.8 V	.01 mA	e4	NOT SPECIFIED	260	2 mm	AUC
SN74AUC1G79DBVRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	3.9 ns	5 Amp	FF/Latches	.95 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	275 MHz	R-PDSO-G5	1	2.7 V	1.45 mm	1.6 mm	Not Qualified	TRUE	.8 V		e4	30	260	2.9 mm	AUC
SN74AUP1G79DBVR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	220000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	24 ns	4 Amp	FF/Latches	.95 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	260 MHz	R-PDSO-G5	1	3.6 V	1.45 mm	1.6 mm	Not Qualified	TRUE	.8 V	.0009 mA	e4	NOT SPECIFIED	260	2.9 mm	AUP/ULP/V
SN74AUC1G79YEAR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	5	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	150 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA5,2X3,20	3.9 ns	5 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		BOTTOM	275 MHz	R-PBGA-B5		2.7 V	.5 mm	.9 mm	Not Qualified	TRUE	.8 V			NOT SPECIFIED	NOT SPECIFIED	1.4 mm	AUC
SN74LVC1G80DCKTE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	9.9 ns	24 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	160 MHz	R-PDSO-G5	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	INVERTED	1.65 V		e4	30	260	2 mm	LVC/LCX/Z
SN74AUP1G79DPWR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BUTT	5	HVBCC	SQUARE	PLASTIC/EPOXY	YES	1		CMOS		1		1.2			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		24 ns	4 Amp			85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	BOTTOM	260 MHz	S-PBCC-B5	1	3.6 V	.4 mm	.8 mm		TRUE	.8 V	.0009 mA	e4	NOT SPECIFIED	NOT SPECIFIED	.8 mm	AUP/ULP/V
SN74LVC1G79WDCKREP	Texas Instruments	D FLIP-FLOP	OTHER	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	160000000 Hz	CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	10.1 ns	32 Amp	FF/Latches	.65 mm	115 Cel		POSITIVE EDGE	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	160 MHz	R-PDSO-G5	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	TRUE	1.65 V	.01 mA	e4	NOT SPECIFIED	260	2 mm	LVC/LCX/Z
SN74AUP1G80DPWR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BUTT	5	HVBCC	SQUARE	PLASTIC/EPOXY	YES	1		CMOS		1		1.2			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		28.7 ns	4 Amp			85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	BOTTOM	260 MHz	S-PBCC-B5	1	3.6 V	.4 mm	.8 mm		INVERTED	.8 V	.0009 mA	e4	NOT SPECIFIED	NOT SPECIFIED	.8 mm	AUP/ULP/V
SN74AUP1G79DCKRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	24 ns	1.7 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	260 MHz	R-PDSO-G5	1	3.6 V	1.1 mm	1.25 mm	Not Qualified	TRUE	.8 V		e4	30	260	2 mm	AUP/ULP/V
SN74LVC1G79YEAR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	5	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	1.8	3.3	50 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA5,2X3,20	9.9 ns	24 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		BOTTOM	160 MHz	R-PBGA-B5		5.5 V	.5 mm	.9 mm	Not Qualified	TRUE	1.65 V			NOT SPECIFIED	NOT SPECIFIED	1.4 mm	LVC/LCX/Z
SN74LVC1G79DBVTG4	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	160000000 Hz	CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	20.5 ns	32 Amp	FF/Latches	.95 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	160 MHz	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	TRUE	1.65 V	.01 mA	e4	NOT SPECIFIED	260	2.9 mm	LVC/LCX/Z
SN74LVC1G80DBV	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS				3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE	TSOP5/6,.11,37		24 Amp	FF/Latches	.95 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G5					Not Qualified
SN74LVC1G79DCKTG4	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	160000000 Hz	CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	20.5 ns	32 Amp	FF/Latches	.65 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	160 MHz	R-PDSO-G5	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	TRUE	1.65 V	.01 mA	e4	NOT SPECIFIED	260	2 mm	LVC/LCX/Z
SN74LVC1G79DRLR	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	FLAT	5	VSOF	RECTANGULAR	PLASTIC/EPOXY	YES	1	160000000 Hz	CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, VERY THIN PROFILE	FL6,.047,20	20.5 ns	32 Amp	FF/Latches	.5 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	DUAL	160 MHz	R-PDSO-F5	1	5.5 V	.6 mm	1.2 mm	Not Qualified	TRUE	1.65 V	.01 mA	e4	NOT SPECIFIED	260	1.6 mm	LVC/LCX/Z
SN74AUP1G79DCK	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	220000000 Hz	CMOS		1		1.2		30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	24 ns	4 Amp		.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	260 MHz	R-PDSO-G5		3.6 V	1.1 mm	1.25 mm		TRUE	.8 V	.0009 mA				2 mm	AUP/ULP/V
SN74AUP1G79DBVRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	24 ns	1.7 Amp	FF/Latches	.95 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	260 MHz	R-PDSO-G5	1	3.6 V	1.45 mm	1.6 mm	Not Qualified	TRUE	.8 V		e4	30	260	2.9 mm	AUP/ULP/V
SN74LVC1G79DCK	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		1.8	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	9.9 ns	24 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	160 MHz	R-PDSO-G5		5.5 V	1.1 mm	1.25 mm	Not Qualified	TRUE	1.65 V			NOT SPECIFIED	NOT SPECIFIED	2 mm	LVC/LCX/Z
SN74LVC1G79QDCKTQ1	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	160000000 Hz	CMOS	AEC-Q100	1	TR	3.3		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		12 ns	32 Amp		.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Matte Tin (Sn)	DUAL	160 MHz	R-PDSO-G5	2	5.5 V	1.1 mm	1.25 mm		TRUE	1.65 V	.01 mA	e3	30	260	2 mm	LVC/LCX/Z
SN74AUP1G79DBVT	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	220000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	24 ns	4 Amp	FF/Latches	.95 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	260 MHz	R-PDSO-G5	1	3.6 V	1.45 mm	1.6 mm	Not Qualified	TRUE	.8 V	.0009 mA	e4	NOT SPECIFIED	260	2.9 mm	AUP/ULP/V
SN74LVC1G80QDCKTQ1	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	160000000 Hz	CMOS	AEC-Q100	1	TR	3.3		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		12.5 ns	32 Amp		.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Matte Tin (Sn)	DUAL	160 MHz	R-PDSO-G5	2	5.5 V	1.1 mm	1.25 mm		INVERTED	1.65 V	.01 mA	e3	30	260	2 mm	LVC/LCX/Z
SN74AUC1G80YEAR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	5	VFBGA	RECTANGULAR	UNSPECIFIED	YES	1	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA5,2X3,20	3.9 ns	5 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		BOTTOM	275 MHz	R-XBGA-B5		2.7 V	.5 mm	.9 mm	Not Qualified	INVERTED	.8 V			NOT SPECIFIED	NOT SPECIFIED	1.4 mm	AUC
SN74AUC1G79YZAR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	5	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	150 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA5,2X3,20	3.9 ns	5 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		BOTTOM	275 MHz	R-PBGA-B5		2.7 V	.5 mm	.9 mm	Not Qualified	TRUE	.8 V			NOT SPECIFIED	NOT SPECIFIED	1.4 mm	AUC
SN74AUC1G79DBVRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	3.9 ns	5 Amp	FF/Latches	.95 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	275 MHz	R-PDSO-G5	1	2.7 V	1.45 mm	1.6 mm	Not Qualified	TRUE	.8 V		e4	30	260	2.9 mm	AUC
SN74AUP1G80YEPR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	5	VFBGA	RECTANGULAR	UNSPECIFIED	YES	1		CMOS		1	TR	1.2	1.2/3.3	30 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA5,2X3,20	28.7 ns	1.7 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		BOTTOM	260 MHz	R-XBGA-B5		3.6 V	.5 mm	.9 mm	Not Qualified	INVERTED	.8 V			NOT SPECIFIED	NOT SPECIFIED	1.4 mm	AUP/ULP/V
SN74AUC1G80DBVRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	3.9 ns	5 Amp	FF/Latches	.95 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	275 MHz	R-PDSO-G5	1	2.7 V	1.45 mm	1.6 mm	Not Qualified	INVERTED	.8 V		e4	30	260	2.9 mm	AUC
SN74ALVC1G79DCKR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		1.8			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08				.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G5		3.6 V	1.1 mm	1.25 mm	Not Qualified	TRUE	1.65 V					2 mm	ALVC/VCX/A

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.