LSSOP Latches & Flip-Flops 102

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	JESD-609 Code	Length	Family
TC74VHC174FS	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	80000000 Hz	CMOS	6		3.3	2/5.5	50 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP16,.25	16.5 ns	8 Amp	FF/Latches	.65 mm	85 Cel	POSITIVE EDGE	-40 Cel		DUAL	110 MHz	R-PDSO-G16	5.5 V	1.6 mm	4.4 mm	Not Qualified	TRUE	2 V		5 mm	AHC/VHC
TC74LVQ74FS(SPL)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	1		3.3		50 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH		16 ns			.65 mm	85 Cel	POSITIVE EDGE	-40 Cel		DUAL	65 MHz	R-PDSO-G14	3.6 V	1.6 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V		5 mm	LVQ
TC7WZ74FU(TE12L)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	CMOS	1	TR	1.8	3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.16	23 ns	24 Amp	FF/Latches	.65 mm	85 Cel	POSITIVE EDGE	-40 Cel		DUAL	180 MHz	R-PDSO-G8	5.5 V	1.3 mm	2.8 mm	Not Qualified	COMPLEMENTARY	1.65 V		2.9 mm	LVC/LCX/Z
TC74LVQ174FS(SPL)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	6		3.3		50 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH		13 ns			.65 mm	85 Cel	POSITIVE EDGE	-40 Cel		DUAL	70 MHz	R-PDSO-G16	3.6 V	1.6 mm	4.4 mm	Not Qualified	TRUE	2 V		5 mm	LVQ
TC74LVQ174FS(EL)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	6		3.3		50 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH		13 ns			.65 mm	85 Cel	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	70 MHz	R-PDSO-G16	3.6 V	1.6 mm	4.4 mm	Not Qualified	TRUE	2 V	e0	5 mm	LVQ
TC74AC74FS	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	1					SMALL OUTLINE, LOW PROFILE, SHRINK PITCH		16 ns			.65 mm	85 Cel	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	200 MHz	R-PDSO-G14	5.5 V	1.6 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V	e0	5 mm	AC

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.