RECTANGULAR Latches & Flip-Flops 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
TP4013BN	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS					5/15		IN-LINE	DIP14,.3			FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T14					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SNJ54ACT11874J	Texas Instruments	D FLIP-FLOP	MILITARY	THROUGH-HOLE	28	DIP	RECTANGULAR	CERAMIC	NO	8		CMOS	38535Q/M;38534H;883B			5	5		IN-LINE	DIP28,.6			FF/Latches	2.54 mm	125 Cel	3-STATE	POSITIVE EDGE	-55 Cel		DUAL		R-XDIP-T28					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SNJ54LS259J-00	Texas Instruments	D LATCH	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		TTL		1		5		15 pF	IN-LINE		24 ns			2.54 mm	125 Cel		LOW LEVEL	-55 Cel		DUAL		R-GDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	36 mA	1:8 DMUX FOLLOWED BY LATCH				19.56 mm	LS
SN158094J	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO	2		TTL							IN-LINE	DIP14,.3			FF/Latches	2.54 mm	70 Cel	OPEN-COLLECTOR	MASTER-SLAVE	0 Cel		DUAL		R-XDIP-T14					Not Qualified
SN54AHCT74J	Texas Instruments	D FLIP-FLOP	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	2		CMOS		1		5		50 pF	IN-LINE		10 ns			2.54 mm	125 Cel		POSITIVE EDGE	-55 Cel		DUAL	80 MHz	R-GDIP-T14		5.5 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V						19.56 mm	AHCT/VHCT
SNJ54HC173J	Texas Instruments	D FLIP-FLOP	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	4		CMOS	38535Q/M;38534H;883B				2/6		IN-LINE	DIP16,.3			FF/Latches	2.54 mm	125 Cel	3-STATE	POSITIVE EDGE	-55 Cel		DUAL		R-XDIP-T16					Not Qualified
7801001RX	Texas Instruments	D FLIP-FLOP	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		TTL		8		5		50 pF	IN-LINE		27 ns	4 Amp		2.54 mm	125 Cel		POSITIVE EDGE	-55 Cel		DUAL	30 MHz	R-GDIP-T20		5.5 V	5.08 mm	7.62 mm	Qualified	TRUE	4.5 V	27 mA			NOT APPLICABLE	NOT APPLICABLE	24.195 mm	LS
74HSTL16919DGGRG4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1				9		3.3	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	5.3 ns		FF/Latches	.5 mm	70 Cel	SERIES-RESISTOR	POSITIVE EDGE	0 Cel		DUAL		R-PDSO-G48		3.45 V	1.2 mm	6.1 mm	Not Qualified	TRUE	3.15 V				NOT SPECIFIED	NOT SPECIFIED	12.5 mm	TTL/H/L
SNJ54ALS113J	Texas Instruments	J-K FLIP-FLOP	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO	2		TTL	38535Q/M;38534H;883B			5	5		IN-LINE	DIP14,.3			FF/Latches	2.54 mm	125 Cel		NEGATIVE EDGE	-55 Cel		DUAL		R-XDIP-T14					Not Qualified
SNC54ALS580J	Texas Instruments	D LATCH	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	1		TTL	MIL-STD-883 Class B (Modified)	8		5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	125 Cel	3-STATE		-55 Cel		DUAL		R-XDIP-T20					Not Qualified
SN54HC377WR	Texas Instruments	D FLIP-FLOP	MILITARY	FLAT	20	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	1		CMOS		8		5		50 pF	FLATPACK		240 ns			1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel		DUAL	19 MHz	R-GDFP-F20		6 V	2.54 mm	6.92 mm	Not Qualified	TRUE	2 V		WITH HOLD MODE				13.09 mm	HC/UH
SNC54AS825JT	Texas Instruments	D FLIP-FLOP	MILITARY	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC	NO	8		TTL	MIL-STD-883 Class B (Modified)			5	5		IN-LINE	DIP24,.3			FF/Latches	2.54 mm	125 Cel	3-STATE	POSITIVE EDGE	-55 Cel		DUAL		R-XDIP-T24					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SNC54AS113J	Texas Instruments	J-K FLIP-FLOP	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO	2		TTL	MIL-STD-883 Class B (Modified)						IN-LINE	DIP14,.3			FF/Latches	2.54 mm	125 Cel		NEGATIVE EDGE	-55 Cel		DUAL		R-XDIP-T14					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
M38510/34101SDX	Texas Instruments	D FLIP-FLOP	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	1		TTL	MIL-PRF-38535 Class S	1		5			FLATPACK		10.5 ns			1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel		DUAL	80 MHz	R-GDFP-F14		5.5 V	2.032 mm	6.35 mm	Not Qualified	COMPLEMENTARY	4.5 V							F/FAST
SN54L71T-01	Texas Instruments	R-S FLIP-FLOP	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	1		TTL		2		5		50 pF	FLATPACK		150 ns				125 Cel		NEGATIVE EDGE	-55 Cel		DUAL	2.5 MHz	R-GDFP-F14		5.5 V			Not Qualified	COMPLEMENTARY	4.5 V	1.44 mA	WITH MASTER SLAVE OPERATION					TTL/H/L
SN54116W-00	Texas Instruments	D LATCH	MILITARY	FLAT	24	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	2		TTL		4		5		15 pF	FLATPACK		22 ns			1.27 mm	125 Cel		LOW LEVEL	-55 Cel		DUAL		R-GDFP-F24		5.5 V	2.29 mm	9.09 mm	Not Qualified	TRUE	4.5 V	100 mA	WITH DUAL LATCH ENABLE				14.36 mm	TTL/H/L
8415001EX	Texas Instruments	J-KBAR FLIP-FLOP	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	2		CMOS	MIL-STD-883	2		4.5			IN-LINE		265 ns			2.54 mm	125 Cel		POSITIVE EDGE	-55 Cel		DUAL	23 MHz	R-GDIP-T16		6 V	5.08 mm	7.62 mm	Qualified	COMPLEMENTARY	2 V				NOT APPLICABLE	NOT APPLICABLE	19.56 mm	HC/UH
DM54LS74AJ	Texas Instruments	D FLIP-FLOP	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO	2	20000000 Hz	TTL				5	5		IN-LINE	DIP14,.3		4 Amp	FF/Latches	2.54 mm	125 Cel		POSITIVE EDGE	-55 Cel		DUAL		R-XDIP-T14					Not Qualified			8 mA
74AC11074PWRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	100000000 Hz	CMOS		1	TR	5	3.3/5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	11.3 ns	24 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G14	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	3 V			e4	30	260	5 mm	AC
M38510/30107BFX	Texas Instruments	D FLIP-FLOP	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	4		TTL	MIL-M-38510 Class B	1		5			FLATPACK		55 ns				125 Cel		POSITIVE EDGE	-55 Cel		DUAL	25 MHz	R-GDFP-F16		5.5 V			Qualified	COMPLEMENTARY	4.5 V							LS
SNJ54LS175W	Texas Instruments	D FLIP-FLOP	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	1	30000000 Hz	TTL	MIL-PRF-38535	4	TUBE	5	5	15 pF	FLATPACK	FL16,.3	25 ns	8 Amp	FF/Latch	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	Tin/Lead (Sn/Pb)	DUAL	30 MHz	R-GDFP-F16		5.5 V	2.03 mm	6.73 mm	Not Qualified	COMPLEMENTARY	4.5 V	18 mA		e0	NOT SPECIFIED	NOT SPECIFIED	10.16 mm	LS
SN54L71T	Texas Instruments	R-S FLIP-FLOP	MILITARY	FLAT	14	DFP	RECTANGULAR	METAL	YES	1		TTL							FLATPACK	FL14,.3			FF/Latches	1.27 mm	125 Cel		MASTER-SLAVE	-55 Cel		DUAL		R-MDFP-F14					Not Qualified
SN54AS573AWR	Texas Instruments	JBAR-KBAR FLIP-FLOP	MILITARY	FLAT	20	DFP	RECTANGULAR	CERAMIC	YES	1		TTL		8	TR	5	5		FLATPACK	FL20,.3		32 Amp	FF/Latches	1.27 mm	125 Cel	3-STATE		-55 Cel		DUAL		R-XDFP-F20					Not Qualified			106 mA
SNC54AS821JT	Texas Instruments	D FLIP-FLOP	OTHER	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC	NO	10		TTL	MIL-STD-883 Class B (Modified)			5	5		IN-LINE	DIP24,.3			FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE	-55 Cel		DUAL		R-XDIP-T24					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
74ACT11273DW	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		5	5	50 pF	SMALL OUTLINE	SOP24,.4	14.1 ns		FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	85 MHz	R-PDSO-G24		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V				NOT SPECIFIED	NOT SPECIFIED	15.4 mm	ACT
SNJ54H78J-00	Texas Instruments	J-K FLIP-FLOP	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		TTL		2		5		25 pF	IN-LINE		27 ns			2.54 mm	125 Cel		NEGATIVE EDGE	-55 Cel		DUAL	25 MHz	R-GDIP-T14		5.5 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V	25 mA	WITH INDIVIDUAL SET INPUTS				19.56 mm	TTL/H/L
SNJ54AS573AWR	Texas Instruments	JBAR-KBAR FLIP-FLOP	MILITARY	FLAT	20	DFP	RECTANGULAR	CERAMIC	YES	1		TTL	38535Q/M;38534H;883B	8	TR	5	5		FLATPACK	FL20,.3		32 Amp	FF/Latches	1.27 mm	125 Cel	3-STATE		-55 Cel		DUAL		R-XDFP-F20					Not Qualified			106 mA
7601901FX	Texas Instruments	D FLIP-FLOP	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	YES	4		TTL	MIL-STD-883	4		5			FLATPACK		52 ns			1.27 mm	125 Cel		NEGATIVE EDGE	-55 Cel		DUAL		R-CDFP-F16	NOT APPLICABLE	5.5 V	2.03 mm	6.73 mm	Not Qualified	COMPLEMENTARY	4.5 V		FOUR 2:1 MUX FOLLOWED BY REGISTER		NOT APPLICABLE	NOT APPLICABLE	10.16 mm	LS
74AC11074DRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	100000000 Hz	CMOS		1	TR	5	3.3/5	50 pF	SMALL OUTLINE	SOP14,.25	11.3 ns	24 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V			e4	30	260	8.65 mm	AC
8405601CA	Texas Instruments	D FLIP-FLOP	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	2	21000000 Hz	CMOS	MIL-STD-883	1	TUBE	5	2/6	50 pF	IN-LINE	DIP14,.3	250 ns	5.2 Amp	FF/Latch	2.54 mm	125 Cel		POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	25 MHz	R-GDIP-T14		6 V	5.08 mm	6.67 mm	Qualified	COMPLEMENTARY	2 V	.04 mA		e0			19.56 mm	HC
V62/08617-01XE	Texas Instruments	D FLIP-FLOP	MILITARY	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	175000000 Hz	CMOS		1	TR	3.3	3.3		SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	8.2 ns	32 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	175 MHz	R-PDSO-G8	1	5.5 V	.9 mm	2 mm	Not Qualified	COMPLEMENTARY	1.65 V	.01 mA		e4	NOT SPECIFIED	260	2.3 mm	LVC/LCX/Z
SNJ54259W-10	Texas Instruments	D LATCH	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	1		TTL		1		5		15 pF	FLATPACK		20 ns			1.27 mm	125 Cel		LOW LEVEL	-55 Cel		DUAL		R-GDFP-F16		5.5 V	2.03 mm	6.73 mm	Not Qualified	TRUE	4.5 V	90 mA	1:8 DMUX FOLLOWED BY LATCH				10.2 mm	TTL/H/L
SNJ54LS375W-00	Texas Instruments	D LATCH	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	2		TTL		2		5		15 pF	FLATPACK		25 ns			1.27 mm	125 Cel		HIGH LEVEL	-55 Cel		DUAL		R-GDFP-F16		5.5 V	2.03 mm	6.73 mm	Not Qualified	COMPLEMENTARY	4.5 V	12 mA					10.16 mm	LS
M38510/65304BEX	Texas Instruments	J-KBAR FLIP-FLOP	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	2		CMOS	MIL-M-38510 Class B	2		5			IN-LINE		250 ns			2.54 mm	125 Cel	3-STATE	POSITIVE EDGE	-55 Cel		DUAL	25 MHz	R-GDIP-T16		6 V	5.08 mm	7.62 mm	Qualified	COMPLEMENTARY	2 V				NOT APPLICABLE	NOT APPLICABLE	19.56 mm	HC/UH
SN54ALS573CWR	Texas Instruments	JBAR-KBAR FLIP-FLOP	MILITARY	FLAT	20	DFP	RECTANGULAR	CERAMIC	YES	1		TTL		8	TR	5	5		FLATPACK	FL20,.3		12 Amp	FF/Latches	1.27 mm	125 Cel	3-STATE		-55 Cel		DUAL		R-XDFP-F20					Not Qualified			27 mA
SNJ54109W-10	Texas Instruments	J-KBAR FLIP-FLOP	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	2		TTL		2		5		15 pF	FLATPACK		28 ns			1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel		DUAL	25 MHz	R-GDFP-F16		5.5 V	2.03 mm	6.73 mm	Not Qualified	COMPLEMENTARY	4.5 V	15 mA					10.2 mm	TTL/H/L
SNC54HC374J	Texas Instruments	D FLIP-FLOP	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	8		CMOS	MIL-STD-883 Class B (Modified)				2/6		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	125 Cel	3-STATE	POSITIVE EDGE	-55 Cel		DUAL		R-XDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
74AC11074DRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	100000000 Hz	CMOS		1	TR	5	3.3/5	50 pF	SMALL OUTLINE	SOP14,.25	11.3 ns	24 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V			e4	30	260	8.65 mm	AC
SNJ54ALS873JT	Texas Instruments	D LATCH	MILITARY	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC	NO	2		TTL	38535Q/M;38534H;883B	4		5	5		IN-LINE	DIP24,.3			FF/Latches	2.54 mm	125 Cel	3-STATE		-55 Cel		DUAL		R-XDIP-T24					Not Qualified
CY74FCT377CTQCTG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	83300000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.25	5.2 ns	64 Amp	FF/Latches	.635 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G20	2	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V			e4	30	260	8.65 mm	FCT
8409901RX	Texas Instruments	D FLIP-FLOP	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		CMOS		8		5			IN-LINE		240 ns			2.54 mm	125 Cel		POSITIVE EDGE	-55 Cel		DUAL	21 MHz	R-GDIP-T20		6 V	5.08 mm	7.62 mm	Qualified	TRUE	2 V				NOT APPLICABLE	NOT APPLICABLE	24.195 mm	HC/UH
M38510/37201BEX	Texas Instruments	D FLIP-FLOP	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	6		TTL	MIL-M-38510 Class B	1		5			IN-LINE		24 ns			2.54 mm	125 Cel	3-STATE	POSITIVE EDGE	-55 Cel		DUAL	40 MHz	R-GDIP-T16		5.5 V	5.08 mm	7.62 mm	Qualified	TRUE	4.5 V				NOT APPLICABLE	NOT APPLICABLE	19.56 mm	ALS
54ACT11112J	Texas Instruments	J-K FLIP-FLOP	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	2		CMOS		2		5	5	50 pF	IN-LINE	DIP16,.3	8.9 ns		FF/Latches	2.54 mm	125 Cel		NEGATIVE EDGE	-55 Cel		DUAL	125 MHz	R-GDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V				NOT SPECIFIED	NOT SPECIFIED	19.56 mm	ACT
SNJ54ALS273J-00	Texas Instruments	D FLIP-FLOP	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		TTL		8		5		50 pF	IN-LINE		17 ns			2.54 mm	125 Cel		POSITIVE EDGE	-55 Cel		DUAL	30 MHz	R-GDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	29 mA					24.195 mm	ALS
SN54LS259J	Texas Instruments	D LATCH	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	1		TTL		8		5	5		IN-LINE	DIP16,.3		4 Amp	FF/Latches	2.54 mm	125 Cel		LOW LEVEL	-55 Cel		DUAL		R-XDIP-T16					Not Qualified	TRUE		36 mA			NOT SPECIFIED	NOT SPECIFIED		LS
SNC5470J	Texas Instruments	J-K FLIP-FLOP	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO	1		TTL	MIL-STD-883 Class B (Modified)						IN-LINE	DIP14,.3			FF/Latches	2.54 mm	125 Cel		POSITIVE EDGE	-55 Cel		DUAL		R-XDIP-T14					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SNJ54111W-10	Texas Instruments	J-K FLIP-FLOP	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	2		TTL		2		5		15 pF	FLATPACK		30 ns			1.27 mm	125 Cel		NEGATIVE EDGE	-55 Cel		DUAL	20 MHz	R-GDFP-F16		5.5 V	2.03 mm	6.73 mm	Not Qualified	COMPLEMENTARY	4.5 V	20.5 mA	MASTER SLAVE OPERATION WITH LOCKOUT				10.2 mm	TTL/H/L
SN54L71T-06	Texas Instruments	R-S FLIP-FLOP	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	1		TTL		2		5		50 pF	FLATPACK		150 ns				125 Cel		NEGATIVE EDGE	-55 Cel		DUAL	2.5 MHz	R-GDFP-F14		5.5 V			Not Qualified	COMPLEMENTARY	4.5 V	1.44 mA	WITH MASTER SLAVE OPERATION					TTL/H/L

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.