AUTOMOTIVE Latches & Flip-Flops 1,776

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
74HCT174D-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		6		5		50 pF	SMALL OUTLINE		53 ns			1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		e4			9.9 mm	HCT
74HC259D-T	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	255 ns	4 Amp	FF/Latches	1.27 mm	125 Cel		LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V	1:8 DMUX FOLLOWED BY LATCH	e4	30	260	9.9 mm	HC/UH
74AHCT74BQ	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	14	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	2	65000000 Hz	CMOS		1	TR	5	5	50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC14,.1X.12,20	11 ns	8 Amp	FF/Latches	.5 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel		QUAD	80 MHz	R-PQCC-N14	1	5.5 V	1 mm	2.5 mm	Not Qualified	COMPLEMENTARY	4.5 V			30	260	3 mm	AHCT/VHCT
74LV109D-T	NXP Semiconductors	J-KBAR FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		2		3.3		50 pF	SMALL OUTLINE		70 ns			1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	77 MHz	R-PDSO-G16		3.6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	1 V					9.9 mm	LV/LV-A/LVX/H
74LVC2G74DC-Q100	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	1		1.8			SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH		13.4 ns			.5 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	200 MHz	R-PDSO-G8		5.5 V	1 mm	2 mm		COMPLEMENTARY	1.65 V					2.3 mm	LVC/LCX/Z
74HC173DB,118	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4		5		50 pF	SMALL OUTLINE, SHRINK PITCH		53 ns			.65 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	60 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V	WITH HOLD MODE	e4			6.2 mm	HC/UH
74AHC74BQ-G	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	14	QCCN	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS			TR		2/5.5	50 pF	CHIP CARRIER	LCC14,.1X.12,20		8 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel		QUAD		R-PQCC-N14					Not Qualified
74HC173NB	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		4		5		50 pF	IN-LINE		53 ns			2.54 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDIP-T16		6 V	4.2 mm	7.62 mm	Not Qualified	TRUE	2 V	WITH HOLD MODE; WITH DUAL OUTPUT ENABLE				19.025 mm	HC/UH
74LV74D,118	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		1		3.3		50 pF	SMALL OUTLINE		33 ns			1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	48 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	1 V		e4	30	260	8.65 mm	LV/LV-A/LVX/H
74AHC74D-Q100J	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS	AEC-Q100	1	TR	5	2/5.5	50 pF	SMALL OUTLINE	SOP14,.25	19.5 ns	8 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	110 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V					8.65 mm	AHC/VHC/H/U/V
74LVC1G80GX,125	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	5	SON	SQUARE	PLASTIC/EPOXY	YES	1		CMOS		1	TR	3.3	3.3	50 pF	SMALL OUTLINE	LCC5(UNSPEC)	13 ns	24 Amp	FF/Latches	.48 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	200 MHz	S-PDSO-N5	1	5.5 V	.35 mm	.8 mm	Not Qualified	INVERTED	1.65 V		e3	30	260	.8 mm	LVC/LCX/Z
74AHCT1G79GV	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS		1		5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	11 ns	8 Amp	FF/Latches	.95 mm	125 Cel		POSITIVE EDGE	-40 Cel	Tin (Sn)	DUAL	70 MHz	R-PDSO-G5	1	5.5 V	1.1 mm	1.5 mm	Not Qualified	TRUE	4.5 V		e3	30	260	2.9 mm	AHCT/VHCT
74LVC1G79GS,132	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	6	VSON	SQUARE	PLASTIC/EPOXY	YES	1		CMOS		1		3.3	3.3	50 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,14	12.5 ns	24 Amp	FF/Latches	.35 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	200 MHz	S-PDSO-N6	1	5.5 V	.35 mm	1 mm	Not Qualified	TRUE	1.65 V		e3	30	260	1 mm	LVC/LCX/Z
74LVC1G175GV	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	175000000 Hz	CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP6,.11,37	17 ns	24 Amp	FF/Latches	.95 mm	125 Cel		POSITIVE EDGE	-40 Cel	Tin (Sn)	DUAL	200 MHz	R-PDSO-G6	1	5.5 V	1.1 mm	1.5 mm	Not Qualified	TRUE	1.65 V		e3	30	260	2.9 mm	LVC/LCX/Z
74LV377PW,112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8		3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	36 ns	8 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G20	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1 V	WITH HOLD MODE	e4	30	260	6.5 mm	LV/LV-A/LVX/H
74HCT175DB	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		4		5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	50 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	17 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.5 V		e4	30	260	6.2 mm	HCT
74AHCT273PW/T3	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		11.5 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	65 MHz	R-PDSO-G20	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V		e4			6.5 mm	AHCT/VHCT/VT
74HC112DB-T	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		2		4.5		50 pF	SMALL OUTLINE, SHRINK PITCH		265 ns			.65 mm	125 Cel		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V		e4			6.2 mm	HC/UH
74HCT73DB-T	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		2		5		50 pF	SMALL OUTLINE, SHRINK PITCH		57 ns			.65 mm	125 Cel		NEGATIVE EDGE	-40 Cel		DUAL	60 MHz	R-PDSO-G14		5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.5 V	MASTER SLAVE OPERATION				6.2 mm	HCT
74LV175N	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		4		3.3		50 pF	IN-LINE		45 ns			2.54 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDIP-T16		5.5 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	1 V					19.025 mm	LV/LV-A/LVX/H
74HCT377DB-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		5		50 pF	SMALL OUTLINE, SHRINK PITCH		48 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	60 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	WITH HOLD MODE	e4			7.2 mm	HCT
74HC107D-T	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		2	TR	5	2/6	50 pF	SMALL OUTLINE	SOP14,.25	48 ns	4 Amp	FF/Latches	1.27 mm	125 Cel		NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	60 MHz	R-PDSO-G14	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V		e4	30	260	8.65 mm	HC/UH
74LVC2G74DP-Q100	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	1		1.8			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		13.4 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	200 MHz	S-PDSO-G8		5.5 V	1.1 mm	3 mm		COMPLEMENTARY	1.65 V					3 mm	LVC/LCX/Z
74HCT377D,652	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	18000000 Hz	CMOS		8	BULK	5	5	50 pF	SMALL OUTLINE	SOP20,.4	48 ns	4 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	60 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	WITH HOLD MODE	e4	30	260	12.8 mm	HCT
74HCT74BQ	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	14	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	2	18000000 Hz	CMOS		1	TR	5	5	50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC14,.1X.12,20	53 ns	4 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	18 MHz	R-PQCC-N14	1	5.5 V	1 mm	2.5 mm	Not Qualified	COMPLEMENTARY	4.5 V		e4	30	260	3 mm	HCT
74HCT112N	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	20000000 Hz	CMOS		2		5	5	50 pF	IN-LINE	DIP16,.3	60 ns	4 Amp	FF/Latches	2.54 mm	125 Cel		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDIP-T16		5.5 V	4.7 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V		e4			21.6 mm	HCT
HEF40175BTT,118	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	5000000 Hz	CMOS		4	TR	5	5/15	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	160 ns		FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	20 MHz	R-PDSO-G16	1	15 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	3 V		e3	30	260	5 mm	4000/14000/40000
74HCT259N	NXP Semiconductors	D LATCH	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		1		5	5	50 pF	IN-LINE	DIP16,.3	57 ns	4 Amp	FF/Latches	2.54 mm	125 Cel		LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDIP-T16		5.5 V	4.7 mm	7.62 mm	Not Qualified	TRUE	4.5 V	1:8 DMUX FOLLOWED BY LATCH	e4			21.6 mm	HCT
74AUP2G79GS,115	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	2	70000000 Hz	CMOS		1	TR	1.1	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.04,14	25.6 ns	1.7 Amp	FF/Latches	.35 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	510 MHz	R-PDSO-N8	1	3.6 V	.35 mm	1 mm	Not Qualified	TRUE	.8 V		e3	30	260	1.35 mm	AUP/ULP/V
74HC74N-Q100U	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	20000000 Hz	CMOS	AEC-Q100	1	BULK	5	2/6	50 pF	IN-LINE	DIP14,.3	265 ns	4 Amp	FF/Latches	2.54 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDIP-T14		6 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V					19.025 mm	HC/UH
74LV175PWDH-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4		3.3		50 pF	SMALL OUTLINE		45 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	1 V					5 mm	LV/LV-A/LVX/H
74AHC74BQ,115	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	14	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS		1	TR	5	2/5.5	50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC14,.1X.12,20	19.5 ns	8 Amp	FF/Latches	.5 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	110 MHz	R-PQCC-N14	1	5.5 V	1 mm	2.5 mm	Not Qualified	COMPLEMENTARY	2 V		e4	30	260	3 mm	AHC/VHC/H/U/V
74HCT174N,652	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	20000000 Hz	CMOS		6	BULK	5	5	50 pF	IN-LINE	DIP16,.3	53 ns	4 Amp	FF/Latches	2.54 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDIP-T16		5.5 V	4.7 mm	7.62 mm	Not Qualified	TRUE	4.5 V		e4			21.6 mm	HCT
74HC73N	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	20000000 Hz	CMOS		2		5	2/6	50 pF	IN-LINE	DIP14,.3	240 ns	4 Amp	FF/Latches	2.54 mm	125 Cel		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDIP-T14		6 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V	MASTER SLAVE OPERATION	e4			19.025 mm	HC/UH
74HC377D/T3	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		5			SMALL OUTLINE		48 ns			1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	60 MHz	R-PDSO-G20		6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V	WITH HOLD MODE	e4			12.8 mm	HC/UH
74AUP2G80GM-G	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	QCCN	SQUARE	PLASTIC/EPOXY	YES	2	70000000 Hz	CMOS			TR		1.2/3.3	30 pF	CHIP CARRIER	LCC8,.06SQ,20		1.7 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel		QUAD		S-PQCC-N8					Not Qualified
74LV377PW-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		3.3		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		36 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G20	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1 V	WITH HOLD MODE	e4			6.5 mm	LV/LV-A/LVX/H
74LV259DB,112	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	60 ns	6 Amp	FF/Latches	.65 mm	125 Cel		LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G16	1	3.6 V	2 mm	5.3 mm	Not Qualified	TRUE	1 V	1:8 DMUX FOLLOWED BY LATCH	e4	30	260	6.2 mm	LV/LV-A/LVX/H
74HC174N	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	24000000 Hz	CMOS		6		5	2/6	50 pF	IN-LINE	DIP16,.3	50 ns	4 Amp	FF/Latches	2.54 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDIP-T16		6 V	4.7 mm	7.62 mm	Not Qualified	TRUE	2 V		e4			21.6 mm	HC/UH
74LV74PW-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		1		3.3		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		33 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	48 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	1 V		e4			5 mm	LV/LV-A/LVX/H
74AUP1G74DC	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS		1	TR	1.1	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	23.3 ns	1.7 Amp	FF/Latch	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	510 MHz	R-PDSO-G8	1	3.6 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	.8 V		e4	30	260	2.3 mm	AUP/ULP/V
74LV175PWDH	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4		3.3		50 pF	SMALL OUTLINE		45 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	1 V					5 mm	LV/LV-A/LVX/H
74AHCT74PW-Q100	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	AEC-Q100	1		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		11 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	80 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm		COMPLEMENTARY	4.5 V					5 mm	AHCT/VHCT/VT
74LV273DB	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8		3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	24 ns	6 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	1 V		e4	30	260	7.2 mm	LV/LV-A/LVX/H
74HC174D/T3	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		6		5			SMALL OUTLINE		250 ns			1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		e4			9.9 mm	HC/UH
74AHCT377D-Q100J	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8		5			SMALL OUTLINE		13.5 ns			1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	80 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm		TRUE	4.5 V					12.8 mm	AHCT/VHCT/VT
74HCT109N,652	NXP Semiconductors	J-KBAR FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	18000000 Hz	CMOS		2	BULK	5	5	50 pF	IN-LINE	DIP16,.3	53 ns	6 Amp	FF/Latches	2.54 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	18 MHz	R-PDIP-T16		5.5 V	4.7 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V		e4			21.6 mm	HCT
74HCT377DB-Q100J	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	18000000 Hz	CMOS	AEC-Q100	8	TR	5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	48 ns	.02 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	18 MHz	R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V					7.2 mm	HCT

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.