AUTOMOTIVE Latches & Flip-Flops 1,776

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
74LVC1G79GX	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	5	HVSON	SQUARE	PLASTIC/EPOXY	YES	1		CMOS		1		3.3			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE		12.5 ns			.48 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	200 MHz	S-PDSO-N5	1	5.5 V	.35 mm	.8 mm		TRUE	1.65 V		e3			.8 mm	LVC/LCX/Z
74AUP1G74GM	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS		1	TR	1.1	1.2/3.3	30 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC8,.06SQ,20	23.3 ns	1.7 Amp	FF/Latch	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	510 MHz	S-PQCC-N8	1	3.6 V	.5 mm	1.6 mm	Not Qualified	COMPLEMENTARY	.8 V		e4	30	260	1.6 mm	AUP/ULP/V
74AHCT574BQ-G	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	20	QCCN	RECTANGULAR	PLASTIC/EPOXY	YES	8	75000000 Hz	CMOS			TR	5	5	50 pF	CHIP CARRIER	LCC20,.1X.18,20		8 Amp	FF/Latches	.5 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel		QUAD		R-PQCC-N20					Not Qualified
74HC75N,652	NXP Semiconductors	D LATCH	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS		2		5	2/6	50 pF	IN-LINE	DIP16,.3	190 ns	4 Amp	FF/Latches	2.54 mm	125 Cel		HIGH LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	60 MHz	R-PDIP-T16		6 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V		e4			19.025 mm	HC/UH
74AUP1G80GF	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	6	VSON	SQUARE	PLASTIC/EPOXY	YES	1		CMOS		1	TR	1.1	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,14	27.2 ns	1.7 Amp	FF/Latches	.35 mm	125 Cel		POSITIVE EDGE	-40 Cel	Tin (Sn)	DUAL	510 MHz	S-PDSO-N6	1	3.6 V	.5 mm	1 mm	Not Qualified	INVERTED	.8 V		e3	30	260	1 mm	AUP/ULP/V
74HC259DB	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	255 ns	4 Amp	FF/Latches	.65 mm	125 Cel		LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V	1:8 DMUX FOLLOWED BY LATCH	e4	30	260	6.2 mm	HC/UH
74HC273D-Q100	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8		5			SMALL OUTLINE		225 ns			1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDSO-G20		6 V	2.65 mm	7.5 mm		TRUE	2 V					12.8 mm	HC/UH
74HCT174PW,112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		6	BULK	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	53 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V		e4	30	260	5 mm	HCT
74HCT173DB-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4		5		50 pF	SMALL OUTLINE, SHRINK PITCH		60 ns			.65 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	60 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	WITH HOLD MODE	e4			6.2 mm	HCT
74HC107PW-T	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		2		5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		48 ns			.65 mm	125 Cel		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	60 MHz	R-PDSO-G14	1	6 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V		e4			5 mm	HC/UH
74AUP1G373GM-H	NXP Semiconductors	D LATCH	AUTOMOTIVE	NO LEAD	6	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		1.2	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	25.9 ns	1.7 Amp	FF/Latches	.5 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-N6		3.6 V	.5 mm	1 mm	Not Qualified	TRUE	.8 V					1.45 mm	AUP/ULP/V
74LVC74ABQ-Q100	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	14	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	AEC-Q100	1		3.3			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		11.9 ns			.5 mm	125 Cel		POSITIVE EDGE	-40 Cel		QUAD	120 MHz	R-PQCC-N14	1	3.6 V	1 mm	2.5 mm		COMPLEMENTARY	1.2 V					3 mm	LVC/LCX/Z
74LVC377PW-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	125000000 Hz	CMOS		8	TR	2.7	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	7.9 ns	24 Amp	FF/Latches	.65 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G20	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1.2 V	WITH HOLD MODE	e4		260	6.5 mm	LVC/LCX/Z
74LV273PWDH-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		3.3		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		24 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G20		5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1 V					6.5 mm	LV/LV-A/LVX/H
74HCT173DB	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4		5		50 pF	SMALL OUTLINE, SHRINK PITCH		60 ns			.65 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	60 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	WITH HOLD MODE	e4			6.2 mm	HCT
74HC109N,652	NXP Semiconductors	J-KBAR FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	20000000 Hz	CMOS		2	BULK	4.5	2/6	50 pF	IN-LINE	DIP16,.3	265 ns	4 Amp	FF/Latches	2.54 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDIP-T16		6 V	4.7 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V		e4			21.6 mm	HC/UH
74LV273PW-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		3.3		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		24 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G20	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1 V		e4			6.5 mm	LV/LV-A/LVX/H
74LV259BQ	NXP Semiconductors	D LATCH	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	UNSPECIFIED	YES	1		CMOS		1	TUBE	3.3	3.3	50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.1X.14,20	60 ns	6 Amp	FF/Latches	.5 mm	125 Cel		LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD		R-XQCC-N16	1	3.6 V	1 mm	2.5 mm	Not Qualified	TRUE	1 V	1:8 DMUX FOLLOWED BY LATCH	e4	30	260	3.5 mm	LV/LV-A/LVX/H
74AHCT273BQ-G	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	20	QCCN	RECTANGULAR	PLASTIC/EPOXY	YES	8	45000000 Hz	CMOS			TR	5	5	50 pF	CHIP CARRIER	LCC20,.1X.18,20		8 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel		QUAD		R-PQCC-N20					Not Qualified
74LVC377DB-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	125000000 Hz	CMOS		8	TR	2.7	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	7.9 ns	24 Amp	FF/Latches	.65 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	150 MHz	R-PDSO-G20	1	3.6 V	2 mm	5.3 mm	Not Qualified	TRUE	1.2 V	WITH HOLD MODE	e4	30	260	7.2 mm	LVC/LCX/Z
74LVC1G79GW,118	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		12.5 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	200 MHz	R-PDSO-G5		5.5 V	1.1 mm	1.25 mm		TRUE	1.65 V		e3			2.05 mm	LVC/LCX/Z
74HC377N	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	24000000 Hz	CMOS		8		5	2/6	50 pF	IN-LINE	DIP20,.3	48 ns	4 Amp	FF/Latches	2.54 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	60 MHz	R-PDIP-T20		6 V	4.2 mm	7.62 mm	Not Qualified	TRUE	2 V	WITH HOLD MODE	e4			26.73 mm	HC/UH
74AHCT74PW-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	65000000 Hz	CMOS		1	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	11 ns	8 Amp	FF/Latches	.65 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	80 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V		e4	30	260	5 mm	AHCT/VHCT
HEF4013BP-Q100U	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	7000000 Hz	CMOS	AEC-Q100		TR		5/15	50 pF	IN-LINE	DIP14,.3		.36 Amp	FF/Latches	2.54 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T14					Not Qualified
74LV74D	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	48000000 Hz	CMOS		1		3.3	3.3	50 pF	SMALL OUTLINE	SOP14,.25	33 ns	12 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	48 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	1 V		e4	30	260	8.65 mm	LV/LV-A/LVX/H
74HC377N,652	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	24000000 Hz	CMOS		8	BULK	5	2/6	50 pF	IN-LINE	DIP20,.3	48 ns	4 Amp	FF/Latches	2.54 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	60 MHz	R-PDIP-T20		6 V	4.2 mm	7.62 mm	Not Qualified	TRUE	2 V	WITH HOLD MODE	e4			26.73 mm	HC/UH
74HC173N	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	24000000 Hz	CMOS		4		5	2/6	50 pF	IN-LINE	DIP16,.3	53 ns	6 Amp	FF/Latches	2.54 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	60 MHz	R-PDIP-T16		6 V	4.7 mm	7.62 mm	Not Qualified	TRUE	2 V	WITH HOLD MODE	e4			21.6 mm	HC/UH
74LVC377D-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	125000000 Hz	CMOS		8	TR	2.7	3.3	50 pF	SMALL OUTLINE	SOP20,.4	7.9 ns	24 Amp	FF/Latches	1.27 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	150 MHz	R-PDSO-G20	1	3.6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	1.2 V	WITH HOLD MODE	e4	30	260	12.8 mm	LVC/LCX/Z
74HC377D-Q100	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8		5			SMALL OUTLINE		240 ns			1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDSO-G20		6 V	2.65 mm	7.5 mm		TRUE	2 V					12.8 mm	HC/UH
74AUP2G80GF	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		1		1.1			SMALL OUTLINE, VERY THIN PROFILE		27.2 ns			.35 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	510 MHz	R-PDSO-N8	1	3.6 V	.5 mm	1 mm	Not Qualified	INVERTED	.8 V		e3			1.35 mm	AUP/ULP/V
74AHCT273D,118	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	45000000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.4	11.5 ns	8 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	65 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V		e4	30	260	12.8 mm	AHCT/VHCT
74LVC1G79GM,132	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	6	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	12.5 ns	24 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	200 MHz	R-PDSO-N6	1	5.5 V	.5 mm	1 mm	Not Qualified	TRUE	1.65 V		e3	30	260	1.45 mm	LVC/LCX/Z
74LV109DB	NXP Semiconductors	J-KBAR FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		2		3.3		50 pF	SMALL OUTLINE, SHRINK PITCH		70 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	77 MHz	R-PDSO-G16		3.6 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	1 V					6.2 mm	LV/LV-A/LVX/H
74LVC1G79GM	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	6	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	3.3	3.3	50 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	12.5 ns	24 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	Tin (Sn)	DUAL	200 MHz	R-PDSO-N6	1	5.5 V	.5 mm	1 mm	Not Qualified	TRUE	1.65 V		e3	30	260	1.45 mm	LVC/LCX/Z
74AUP1G80GM,115	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	6	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	27.2 ns	1.7 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	Tin (Sn)	DUAL	510 MHz	R-PDSO-N6	1	3.6 V	.5 mm	1 mm	Not Qualified	INVERTED	.8 V		e3	30	260	1.45 mm	AUP/ULP/V
74HCT112DB,112	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		2		5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	60 ns	4 Amp	FF/Latches	.65 mm	125 Cel		NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.5 V		e4	30	260	6.2 mm	HCT
74AHC74D-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS		1	TR	5	2/5.5	50 pF	SMALL OUTLINE	SOP14,.25	19.5 ns	8 Amp	FF/Latches	1.27 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V		e4			8.65 mm	AHC
74LV273D,112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8		3.3	3.3	50 pF	SMALL OUTLINE	SOP20,.4	24 ns	6 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	1 V		e4	30	260	12.8 mm	LV/LV-A/LVX/H
74HCT273PW-Q100	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		45 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G20		5.5 V	1.1 mm	4.4 mm		TRUE	4.5 V					6.5 mm	HCT
74AUP1G79GF	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	6	VSON	SQUARE	PLASTIC/EPOXY	YES	1		CMOS		1	TR	1.1	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,14	25.6 ns	1.7 Amp	FF/Latches	.35 mm	125 Cel		POSITIVE EDGE	-40 Cel	Tin (Sn)	DUAL	510 MHz	S-PDSO-N6	1	3.6 V	.5 mm	1 mm	Not Qualified	TRUE	.8 V		e3	30	260	1 mm	AUP/ULP/V
74HC273BQ,115	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	20	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		225 ns			.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	24 MHz	R-PQCC-N20	1	6 V	1 mm	2.5 mm	Not Qualified	TRUE	2 V		e4	30	260	4.5 mm	HC/UH
74HC377U	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD		DIE	RECTANGULAR	UNSPECIFIED	YES	1		CMOS		8		5			UNCASED CHIP		240 ns				125 Cel		POSITIVE EDGE	-40 Cel		UPPER	24 MHz	R-XUUC-N		6 V			Not Qualified	TRUE	2 V						HC/UH
74HC107D	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		2		5	2/6	50 pF	SMALL OUTLINE	SOP14,.25	48 ns	4 Amp	FF/Latches	1.27 mm	125 Cel		NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	60 MHz	R-PDSO-G14	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V		e4	30	260	8.65 mm	HC/UH
74LV175DB-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4		3.3		50 pF	SMALL OUTLINE		45 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	1 V					6.2 mm	LV/LV-A/LVX/H
74HCT7273D,112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	TUBE	5	5	50 pF	SMALL OUTLINE	SOP20,.4		4 Amp	FF/Latches	1.27 mm	125 Cel	OPEN-DRAIN	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V		e4	30	260	12.8 mm	HCT
74HC173DB-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4		5		50 pF	SMALL OUTLINE, SHRINK PITCH		53 ns			.65 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	60 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V	WITH HOLD MODE	e4			6.2 mm	HC/UH
74HCT109D,653	NXP Semiconductors	J-KBAR FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	18000000 Hz	CMOS		2	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	53 ns	6 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	18 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V		e4	30	260	9.9 mm	HCT
74HC109DB,118	NXP Semiconductors	J-KBAR FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		2	TR	4.5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	265 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V		e4	30	260	6.2 mm	HC/UH

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.