GULL WING Latches & Flip-Flops 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
CD74HCT259MG4	Texas Instruments	D LATCH	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		8	TUBE	5	5	50 pF	SMALL OUTLINE	SOP16,.25	57 ns	4 Amp	FF/Latches	1.27 mm	125 Cel		LOW LEVEL	-55 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		1:8 DMUX FOLLOWED BY LATCH	e4	30	260	9.9 mm	HCT
SN74F377ADWR	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	110000000 Hz	TTL		8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.4	10.5 ns	20 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	90 mA	WITH HOLD MODE	e4	30	260	12.8 mm	F/FAST
SN74AHC74DGVRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	75000000 Hz	CMOS		1	TR	3.3	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25,16	17.5 ns	8 Amp	FF/Latches	.4 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G14	1	5.5 V	1.2 mm	3.6 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	4.4 mm	AHC/VHC/H/U/V
SN74ALS174NSE4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		6		5			SMALL OUTLINE		17 ns			1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	50 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V			e4	30	260	10.2 mm	ALS
CD74ACT74M96E4	Texas Instruments	D FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	85000000 Hz	CMOS		1	TR	5	5	50 pF	SMALL OUTLINE	SOP14,.25	9.5 ns	24 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	85 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	30	260	8.65 mm	ACT
DM74LS259WM	Texas Instruments	D LATCH	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		1		5			SMALL OUTLINE		38 ns			1.27 mm	70 Cel		LOW LEVEL	0 Cel		DUAL		R-PDSO-G16		5.25 V	2.65 mm	7.5 mm		TRUE	4.75 V		1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH				10.3 mm	LS
SN74HC78D	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	25000000 Hz	CMOS					2/6	50 pF	SMALL OUTLINE	SOP14,.25		5.2 Amp	FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL		R-PDSO-G14					Not Qualified
SN74LVC112ADGVRE4	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	150000000 Hz	CMOS		2	TR	1.8	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25,16	7.1 ns	24 Amp	FF/Latches	.4 mm	85 Cel		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G16	1	3.6 V	1.2 mm	3.6 mm	Not Qualified	COMPLEMENTARY	1.65 V			e4	30	260	4.4 mm	LVC/LCX/Z
SN74ALS996DWP3	Texas Instruments	D LATCH	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5	5		SMALL OUTLINE	SOP24,.4		24 Amp	FF/Latches	1.27 mm	70 Cel	3-STATE		0 Cel		DUAL		R-PDSO-G24
SN74LS375DE4	Texas Instruments	D LATCH	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		TTL		2	TUBE	5	5	15 pF	SMALL OUTLINE	SOP16,.25	30 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V	12 mA	DUMMY VAL	e4	30	260	9.9 mm	LS
SN74AS174D3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	6		TTL							SMALL OUTLINE	SOP16,.25			FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL		R-PDSO-G16
SN74ALS109ADG4	Texas Instruments	J-KBAR FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	2	34000000 Hz	TTL		2	TUBE	5	5	50 pF	SMALL OUTLINE	SOP16,.25	18 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	34 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.91 mm	Not Qualified	COMPLEMENTARY	4.5 V	4 mA		e4	30	260	9.9 mm	ALS
SN74F175NSRE4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	4	100000000 Hz	TTL		1	TR	5	5		SMALL OUTLINE	SOP16,.3	9.5 ns	20 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.5 V	34 mA		e4	30	260	10.2 mm	F/FAST
SN74AHC74DGV	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		CMOS		1		3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25,16	17.5 ns			.4 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	110 MHz	R-PDSO-G14		5.5 V	1.2 mm	3.6 mm	Not Qualified	COMPLEMENTARY	2 V						4.4 mm	AHC
SN74HC74D3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		CMOS					2/6		SMALL OUTLINE	SOP14,.25			FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G14
DM74LS279M	Texas Instruments	R-S LATCH	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	4		TTL		2		5			SMALL OUTLINE		27 ns			1.27 mm	70 Cel		LOW LEVEL	0 Cel		DUAL		R-PDSO-G16		5.25 V	1.753 mm	3.9 mm		TRUE	4.75 V						9.9 mm	LS
SN74HC573DW3	Texas Instruments	D LATCH	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		8			2/6		SMALL OUTLINE	SOP20,.4			FF/Latches	1.27 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDSO-G20
SN74LV74APWE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	45000000 Hz	CMOS		1	TUBE	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	23 ns	6 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G14	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	LV/LV-A/LVX/H
CD74HC173ME4	Texas Instruments	D FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		4		4.5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	300 ns	6 Amp	FF/Latches	1.27 mm	125 Cel	3-STATE	POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		WITH DUAL OUTPUT ENABLE	e4	30	260	9.9 mm	HC/UH
SN74AS174NSR	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	100000000 Hz	TTL		6	TR	5		50 pF	SMALL OUTLINE	SOP16,.3	10 ns	20 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	45 mA		e4	30	260	10.3 mm	AS
SN74F379D-00R	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		4		5			SMALL OUTLINE		9.5 ns			1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL	140 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V		WITH HOLD MODE				9.9 mm	F/FAST
SN74LVC1G80DCKTG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	9.9 ns	32 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	160 MHz	R-PDSO-G5	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	INVERTED	1.65 V			e4	30	260	2 mm	LVC/LCX/Z
CD4076BPWG4	Texas Instruments	D FLIP-FLOP	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	3000000 Hz	CMOS		4	TUBE	5	5/15	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	600 ns		FF/Latches	.65 mm	125 Cel	3-STATE	POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	8 MHz	R-PDSO-G16	1	18 V	1.2 mm	4.4 mm	Not Qualified	TRUE	3 V			e4	30	260	5 mm	4000/14000/40000
SN74AS575DWP3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	8		TTL							SMALL OUTLINE	SOP24,.4			FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-PDSO-G24
SN74AUP1G79DCKTE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	24 ns	1.7 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	260 MHz	R-PDSO-G5	1	3.6 V	1.1 mm	1.25 mm	Not Qualified	TRUE	.8 V			e4	30	260	2 mm	AUP/ULP/V
SN74HC75DR	Texas Instruments	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		CMOS		2	TR		2/6	50 pF	SMALL OUTLINE	SOP16,.25		5.2 Amp	FF/Latches	1.27 mm	85 Cel		HIGH LEVEL	-40 Cel		DUAL		R-PDSO-G16					Not Qualified	COMPLEMENTARY								HC/UH
SN74S175NSRE4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	75000000 Hz	TTL		4	TR	5	5		SMALL OUTLINE	SOP16,.3	17 ns	20 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL	75 MHz	R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.75 V	96 mA			NOT SPECIFIED	NOT SPECIFIED	10.2 mm	S
CD74ACT273MG4	Texas Instruments	D FLIP-FLOP	MILITARY	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	85000000 Hz	CMOS		8	TUBE	5	5	50 pF	SMALL OUTLINE	SOP20,.4	13.5 ns	24 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	85 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V			e4	30	260	12.8 mm	ACT
CD4042BDRG4	Texas Instruments	D LATCH	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1		CMOS		4	TR	5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	500 ns	2.4 Amp	FF/Latches	1.27 mm	125 Cel		NEGATIVE EDGE	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	.6 mA	PROGRAMMABLE TRIGGER TYPE	e4	NOT SPECIFIED	260	9.9 mm	4000/14000/40000
SN74AS29842DW3	Texas Instruments	D LATCH	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		10					SMALL OUTLINE	SOP24,.4			FF/Latches	1.27 mm	70 Cel	3-STATE		0 Cel		DUAL		R-PDSO-G24											NOT SPECIFIED	NOT SPECIFIED
SN74ABT377ANSRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	150000000 Hz	BICMOS		8	TR	5	5		SMALL OUTLINE	SOP20,.3	7.3 ns	64 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	30 mA	WITH HOLD MODE	e4	30	260	12.6 mm	ABT
SN74LVC1G80QDCKRQ1	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	160000000 Hz	CMOS	AEC-Q100	1	TR	3.3		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		12.5 ns	32 Amp		.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Matte Tin (Sn)	DUAL	160 MHz	R-PDSO-G5	2	5.5 V	1.1 mm	1.25 mm		INVERTED	1.65 V	.01 mA		e3	30	260	2 mm	LVC/LCX/Z
SN74AUP2G80DCUR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	80000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	28.7 ns	4 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	260 MHz	R-PDSO-G8	1	3.6 V	.9 mm	2 mm	Not Qualified	TRUE	.8 V	.0009 mA		e4	NOT SPECIFIED	260	2.3 mm	AUP/ULP/V
CD74ACT273SM96G4	Texas Instruments	D FLIP-FLOP	MILITARY	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	85000000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	13.5 ns	24 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	85 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V			e4	30	260	7.2 mm	ACT
5962-01-394-8417	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	8	35000000 Hz	TTL				5	5		SMALL OUTLINE	SOP20,.4		24 Amp	FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-PDSO-G20					Not Qualified			31 mA			NOT SPECIFIED	NOT SPECIFIED
SN74LS74ADBRE4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	25000000 Hz	TTL		1	TR	5	5		SMALL OUTLINE, SHRINK PITCH	SSOP14,.3	40 ns	8 Amp	FF/Latches	.65 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDSO-G14	1	5.25 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.75 V	8 mA		e4	30	260	6.2 mm	LS
SN74ALS259DP3	Texas Instruments	D LATCH	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5	5		SMALL OUTLINE	SOP16,.25			FF/Latches	1.27 mm	70 Cel			0 Cel		DUAL		R-PDSO-G16
SN74ALS273NSRG4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	35000000 Hz	TTL		8	TR	5	5		SMALL OUTLINE	SOP20,.3	15 ns	24 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	35 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	29 mA		e4	30	260	12.6 mm	ALS
CD74HC377PWE4	Texas Instruments	D FLIP-FLOP	MILITARY	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		8		5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	265 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G20	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		WITH HOLD MODE	e4	30	260	6.5 mm	HC/UH
CD4042BPWR	Texas Instruments	D LATCH	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		4	TR	5	5/15	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	500 ns		FF/Latches	.65 mm	125 Cel		NEGATIVE EDGE	-55 Cel		DUAL		R-PDSO-G16		18 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	3 V		PROGRAMMABLE TRIGGER TYPE		NOT SPECIFIED	NOT SPECIFIED	5 mm	4000/14000/40000
SN74LS76D	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		TTL		2		5			SMALL OUTLINE		40 ns			1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL	15 MHz	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V		MASTER SLAVE OPERATION				9.9 mm	TTL/H/L
SN74AS821DW3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	10		TTL				5	5		SMALL OUTLINE	SOP24,.4			FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-PDSO-G24											NOT SPECIFIED	NOT SPECIFIED
SN74AUC1G79DCKR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	3.9 ns	9 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	275 MHz	R-PDSO-G5	1	2.7 V	1.1 mm	1.25 mm	Not Qualified	TRUE	.8 V	.01 mA		e4	NOT SPECIFIED	260	2 mm	AUC
SN74LS174D3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	6	30000000 Hz	TTL				5	5		SMALL OUTLINE	SOP16,.25		8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL		R-PDSO-G16								26 mA
SN74ACT74DWR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		CMOS		1		5			SMALL OUTLINE		13 ns				85 Cel		POSITIVE EDGE	-40 Cel		DUAL	125 MHz	R-PDSO-G14		5.5 V			Not Qualified	COMPLEMENTARY	4.5 V							ACT
SN74ALS576ADWP3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	8		TTL				5	5		SMALL OUTLINE	SOP20,.4			FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		DUAL		R-PDSO-G20
SN74LS174NSR	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	30000000 Hz	TTL		6	TR	5	5	15 pF	SMALL OUTLINE	SOP16,.3	30 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	30 MHz	R-PDSO-G16	1	5.25 V	2 mm	5.3 mm	Not Qualified	TRUE	4.75 V	26 mA		e4	NOT SPECIFIED	260	10.2 mm	LS
CD74ACT175ME4	Texas Instruments	D FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	100000000 Hz	CMOS		4	TUBE	5	5	50 pF	SMALL OUTLINE	SOP16,.25	11.5 ns	24 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	114 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V	.08 mA		e4	30	260	9.9 mm	ACT

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.