Latches & Flip-Flops

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
74LVC2G74DC,125	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	175000000 Hz	CMOS		1	TR	1.8	3.3		SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	13.4 ns	24 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	200 MHz	R-PDSO-G8	1	5.5 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	1.65 V			e4	30	260	2.3 mm	LVC/LCX/Z
SN74LS107AN	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	2	30000000 Hz	TTL		2	TUBE	5	5	15 pF	IN-LINE	DIP14,.3	20 ns	8 Amp	FF/Latches	2.54 mm	70 Cel		NEGATIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	30 MHz	R-PDIP-T14		5.25 V	5.08 mm	6.35 mm	Not Qualified	COMPLEMENTARY	4.75 V	6 mA		e4			19.3 mm	LS
CD4013BCMX	National Semiconductor	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		CMOS		1		5		50 pF	SMALL OUTLINE		350 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	2.5 MHz	R-PDSO-G14		15 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V						8.65 mm	4000/14000/40000
CD40175BPWR	Texas Instruments	D FLIP-FLOP	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	2000000 Hz	CMOS		4	TR	5	5/15	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	400 ns	6.8 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	6.5 MHz	R-PDSO-G16	1	18 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	3 V	.6 mA		e4	30	260	5 mm	4000/14000/40000
CD4044BPWRE4	Texas Instruments	R-S LATCH	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		4	TR	5	5/15	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	300 ns		FF/Latches	.65 mm	125 Cel	3-STATE	LOW LEVEL	-55 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	18 V	1.2 mm	4.4 mm	Not Qualified	TRUE	3 V			e4	30	260	5 mm	4000/14000/40000
CD74HC74M	Texas Instruments	D FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	20000000 Hz	CMOS		1	TUBE	4.5	2/6	50 pF	SMALL OUTLINE	SOP14,.25	265 ns	5.2 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	23 MHz	R-PDSO-G14	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V	.04 mA		e4	NOT SPECIFIED	260	8.65 mm	HC/UH
SN74LVC1G79DCKR	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	160000000 Hz	CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	20.5 ns	32 Amp	FF/Latches	.65 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	160 MHz	R-PDSO-G5	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	TRUE	1.65 V	.01 mA		e4	NOT SPECIFIED	260	2 mm	LVC/LCX/Z
SN74HC74PWG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	25000000 Hz	CMOS		1	TUBE	5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	220 ns	5.2 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G14	1	6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V	.04 mA		e4	30	260	5 mm	HC
SN74LS273NSRG4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	30000000 Hz	TTL		8	TR	5	5		SMALL OUTLINE	SOP20,.3	27 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	30 MHz	R-PDSO-G20	1	5.25 V	2 mm	5.3 mm	Not Qualified	TRUE	4.75 V	27 mA		e4	30	260	12.6 mm	LS
74HC259D,653	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		1	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	255 ns	4 Amp	FF/Latches	1.27 mm	125 Cel		LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH	e4	30	260	9.9 mm	HC/UH
CD74HC74M96	Texas Instruments	D FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	20000000 Hz	CMOS		1	TR	4.5	2/6	50 pF	SMALL OUTLINE	SOP14,.25	265 ns	5.2 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	23 MHz	R-PDSO-G14	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V	.04 mA		e4	NOT SPECIFIED	260	8.65 mm	HC/UH
SN74ACT74DR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	125000000 Hz	CMOS		1	TR	5	5	50 pF	SMALL OUTLINE	SOP14,.25	13 ns	24 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	125 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V	.02 mA		e4	NOT SPECIFIED	260	8.65 mm	ACT
MC14013BDTR2G	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	2000000 Hz	CMOS		1	TR	5	5/15	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	350 ns		FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL	7 MHz	R-PDSO-G14	1	18 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	3 V			e3	30	260	5 mm	4000/14000/40000
SN74HC74NE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2	25000000 Hz	CMOS		1	TUBE	5	2/6	50 pF	IN-LINE	DIP14,.3	220 ns	5.2 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDIP-T14		6 V	5.08 mm	6.35 mm	Not Qualified	COMPLEMENTARY	2 V	.04 mA		e4			19.3 mm	HC
TPIC6B273DWR	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1				8	TR	5	5	30 pF	SMALL OUTLINE	SOP20,.4	150 ns		FF/Latches	1.27 mm	125 Cel	OPEN-DRAIN	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	4.5 V	.3 mA		e4	30	260	12.8 mm	6B
MC100E143FNR2	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		ECL		9		5			CHIP CARRIER		1 ns			1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	700 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	100E
SN74ACT74PWR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	125000000 Hz	CMOS		1	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	13 ns	24 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	125 MHz	R-PDSO-G14	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V	.02 mA		e4	NOT SPECIFIED	260	5 mm	ACT
SN74HCT74DT	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	22000000 Hz	CMOS		1	TR	5	5	50 pF	SMALL OUTLINE	SOP14,.25	35 ns	4 Amp	FF/Latch	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.91 mm	Not Qualified	COMPLEMENTARY	4.5 V	.04 mA		e4	30	260	8.65 mm	HCT
74AHC273PW,118	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	70000000 Hz	CMOS		8	TR	5	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	21.5 ns	8 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	100 MHz	R-PDSO-G20	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V			e4	30	260	6.5 mm	AHC
SN74HC74DB	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	25000000 Hz	CMOS					2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3		4 Amp	FF/Latches	.635 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G14	1				Not Qualified					e4	30	260
SN74LS107AD	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	2	30000000 Hz	TTL		2	TUBE	5	5	15 pF	SMALL OUTLINE	SOP14,.25	20 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		NEGATIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	30 MHz	R-PDSO-G14	1	5.25 V	1.75 mm	3.91 mm	Not Qualified	COMPLEMENTARY	4.75 V	6 mA		e4	30	260	8.65 mm	LS
HEF4013BT-Q100,118	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		CMOS	AEC-Q100	1		5			SMALL OUTLINE		220 ns			1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G14		15 V	1.75 mm	3.9 mm		COMPLEMENTARY	3 V						8.65 mm	4000/14000/40000
SN74LS74ADR	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	25000000 Hz	TTL		1	TR	5	5	15 pF	SMALL OUTLINE	SOP14,.25	40 ns	8 Amp	FF/Latch	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	25 MHz	R-PDSO-G14	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V	8 mA		e4	NOT SPECIFIED	260	8.65 mm	LS
MC14043BDG	Onsemi	R-S LATCH	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		4	RAIL	5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	350 ns		FF/Latches	1.27 mm	125 Cel	3-STATE	HIGH LEVEL	-55 Cel	MATTE TIN	DUAL		R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V			e3	30	260	9.9 mm	4000/14000/40000
SN74AHC273PWR	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	70000000 Hz	CMOS		8	TR	3.3	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	19.5 ns	8 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	100 MHz	R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V	.04 mA		e4	NOT SPECIFIED	260	6.5 mm	AHC/VHC/H/U/V
SN74HC273PW	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	21000000 Hz	CMOS		8	TUBE	5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	200 ns	5.2 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	25 MHz	R-PDSO-G20	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V	.08 mA	DUMMY VAL	e4	NOT SPECIFIED	260	6.5 mm	HC/UH
SN74LV273APWRE4	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	45000000 Hz	CMOS		8		3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	27 ns	12 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V	.02 mA		e4	30	260	6.5 mm	LV/LV-A/LVX/H
54F174DMQB	Texas Instruments	D FLIP-FLOP	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	MIL-STD-883	6		5			IN-LINE		12 ns			2.54 mm	125 Cel	3-STATE	POSITIVE EDGE	-55 Cel		DUAL	70 MHz	R-GDIP-T16		5.5 V	5.08 mm	7.62 mm		TRUE	4.5 V						19.94 mm	F/FAST
CD4044BDR	Texas Instruments	R-S LATCH	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1		CMOS		4	TR	5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	300 ns	2.4 Amp	FF/Latch	1.27 mm	125 Cel	3-STATE	LOW LEVEL	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V	.06 mA		e4	NOT SPECIFIED	260	9.9 mm	4000/14000/40000
NTE74175	Nte Electronics	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		4		5			IN-LINE		35 ns			2.54 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL	25 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm		COMPLEMENTARY	4.75 V		LG_MAX				22 mm	TTL/H/L
MC74AC273DTR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	75000000 Hz	CMOS		8	TR	5	3.3/5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	14.5 ns	12 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G20	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			e4	30	260	6.5 mm	AC
MC74AC74DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	95000000 Hz	CMOS		1		5	3.3/5	50 pF	SMALL OUTLINE	SOP14,.25	16 ns	12 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	125 MHz	R-PDSO-G14	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e3	30	260	8.65 mm	AC
SN74AUP1G80DCKT	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	260000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	28.7 ns	4 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	260 MHz	R-PDSO-G5	1	3.6 V	1.1 mm	1.25 mm	Not Qualified	INVERTED	.8 V	.0009 mA		e4	NOT SPECIFIED	260	2 mm	AUP/ULP/V
SN74HC175PWR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS		4	TR	5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	190 ns	5.2 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V	.08 mA		e4	30	260	5 mm	HC
SN74HCT74D	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	22000000 Hz	CMOS		1	TUBE	5	5	50 pF	SMALL OUTLINE	SOP14,.25	35 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.91 mm	Not Qualified	COMPLEMENTARY	4.5 V	.04 mA		e4	30	260	8.65 mm	HCT
CD4044BE	Texas Instruments	R-S LATCH	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	1		CMOS		4	TUBE	5	5/15	50 pF	IN-LINE	DIP16,.3	300 ns	2.4 Amp	FF/Latches	2.54 mm	125 Cel	3-STATE	LOW LEVEL	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDIP-T16		18 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V	.06 mA		e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	4000/14000/40000
SN74LS74ANSRG4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	25000000 Hz	TTL		1	TR	5	5	15 pF	SMALL OUTLINE	SOP14,.3	40 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	25 MHz	R-PDSO-G14	1	5.25 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.75 V	8 mA		e4	NOT SPECIFIED	260	10.2 mm	LS
74LVX74MTC	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	50000000 Hz	CMOS		1		2.7	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	22 ns	4 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDSO-G14	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	LV/LV-A/LVX/H
MC14175BCPG	Onsemi	D FLIP-FLOP	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	2000000 Hz	CMOS		4		5	5/15	50 pF	IN-LINE	DIP16,.3	400 ns		FF/Latches	2.54 mm	125 Cel		POSITIVE EDGE	-55 Cel	Tin (Sn)	DUAL	6.5 MHz	R-PDIP-T16		18 V	4.44 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V			e3		260	19.175 mm	4000/14000/40000
MM74HC273N	Onsemi	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	21000000 Hz	CMOS		8		5		50 pF	IN-LINE, SHRINK PITCH	DIP20,.3	170 ns	4 Amp		2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDIP-T20		6 V	5.08 mm	7.62 mm		TRUE	2 V	.16 mA					26.075 mm	HC/UH
SN74HCT273NSR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.3	42 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	23 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	NOT SPECIFIED	260	12.6 mm	HCT
74LVC1G74DP	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY		YES	1	175000000 Hz	CMOS		1	TR	1.8	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.16	13.4 ns	24 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	200 MHz	S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	1.65 V			e4	30	260	3 mm	LVC/LCX/Z
CD4043BDRE4	Texas Instruments	R-S LATCH	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		4	TR	5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	300 ns		FF/Latches	1.27 mm	125 Cel	3-STATE	HIGH LEVEL	-55 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V			e4	30	260	9.9 mm	4000/14000/40000
MM74C76N	National Semiconductor	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2	2500000 Hz	CMOS		2		5	5/15	50 pF	IN-LINE	DIP16,.3	300 ns	.36 Amp	FF/Latches	2.54 mm	85 Cel		NEGATIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	2.5 MHz	R-PDIP-T16		15 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V		MASTER SLAVE OPERATION	e0			19.34 mm	CMOS
SN74ACT74PWRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	125000000 Hz	CMOS		1	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	13 ns	24 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G14	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	40	260	5 mm	ACT
SN74HC74N3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2		CMOS		1		5	2/6		IN-LINE	DIP14,.3	220 ns		FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	29 MHz	R-PDIP-T14		6 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V				NOT SPECIFIED	NOT SPECIFIED	19.305 mm	HC/UH
SN74HCT273NSRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.3	42 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V			e4	30	260	12.6 mm	HCT
SN74HCT273NSRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.3	42 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V			e4	30	260	12.6 mm	HCT

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.