Texas Instruments Other Function Logic ICs 544

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Technology	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74LVC1G97YEPR	Texas Instruments	LOGIC CIRCUIT	INDUSTRIAL	BALL	6	VFBGA	RECTANGULAR	UNSPECIFIED	YES	YES	1	CMOS	TR	1.8	3.3	50 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,20	24 Amp	Gates	.5 mm	85 Cel	3-STATE	-40 Cel		BOTTOM	R-XBGA-B6		5.5 V	.5 mm	.9 mm	Not Qualified		1.65 V		NOT SPECIFIED	NOT SPECIFIED	1.4 mm	LVC/LCX/Z
SN74AUP1G98DBVT	Texas Instruments	LOGIC CIRCUIT	INDUSTRIAL	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1	CMOS	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	1.7 Amp	Gates	.95 mm	85 Cel	3-STATE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	1	3.6 V	1.45 mm	1.6 mm	Not Qualified		.8 V	e4	30	260	2.9 mm	AUP/ULP/V
SN74LS444J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC		NO		TTL		5	5		IN-LINE	DIP20,.3		Other Logic ICs	2.54 mm	70 Cel		0 Cel		DUAL	R-XDIP-T20
SN74LS440NP1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		TTL		5	5		IN-LINE	DIP20,.3		Other Logic ICs	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T20					Not Qualified
SN74ALVCH16344DGG	Texas Instruments	BUS DRIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES		CMOS		3.3	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		Other Logic ICs	.5 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G56					Not Qualified
SN74LS442FN3	Texas Instruments		COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES		TTL		5	5		CHIP CARRIER	LDCC20,.4SQ		Other Logic ICs	1.27 mm	70 Cel		0 Cel		QUAD	S-PQCC-J20
SN74LS440N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		TTL		5	5		IN-LINE	DIP20,.3		Other Logic ICs	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T20
SN74AUP1G57DCKTE4	Texas Instruments	LOGIC CIRCUIT	INDUSTRIAL	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1	CMOS	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	1.7 Amp	Gates	.65 mm	85 Cel	3-STATE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	1	3.6 V	1.1 mm	1.25 mm	Not Qualified		.8 V	e4	30	260	2 mm	AUP/ULP/V
SN74AUP1G58YZTR	Texas Instruments	LOGIC CIRCUIT	INDUSTRIAL	BALL	6	VFBGA	RECTANGULAR	UNSPECIFIED	YES	YES	1	CMOS	TR	1.2	1.2/3.3	30 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,20	1.7 Amp	Gates	.5 mm	85 Cel	3-STATE	-40 Cel	TIN SILVER COPPER	BOTTOM	R-XBGA-B6	1	3.6 V	.625 mm	.9 mm	Not Qualified		.8 V	e1	30	260	1.4 mm	AUP/ULP/V
SN74TVC3010DBQRE4	Texas Instruments	LOGIC CIRCUIT	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	NMOS		2.1	2.1		SMALL OUTLINE, SHRINK PITCH	SSOP24,.24		Other Logic ICs	.635 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	2	5 V	1.75 mm	3.9 mm	Not Qualified		.6 V	e4	30	260	8.65 mm	74
SN74ALS2241N	Texas Instruments
SN74LS443N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO		TTL		5	5		IN-LINE	DIP20,.3		Other Logic ICs	2.54 mm	70 Cel		0 Cel		DUAL	R-PDIP-T20
SN74S124DR	Texas Instruments	LOGIC CIRCUIT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	TTL		5			SMALL OUTLINE				1.27 mm	70 Cel		0 Cel		DUAL	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	S
SN74AUP1G99DCUR	Texas Instruments	LOGIC CIRCUIT	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1	CMOS	TR	1.1	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	4 Amp	Gates	.5 mm	85 Cel	3-STATE	-40 Cel	Matte Tin (Sn)	DUAL	R-PDSO-G8	1	3.6 V	.9 mm	2 mm	Not Qualified	TRUE	.8 V	e3	NOT SPECIFIED	260	2.3 mm	AUP/ULP/V
SN74LS448DW3	Texas Instruments		COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES		TTL		5	5		SMALL OUTLINE	SOP20,.4		Other Logic ICs	1.27 mm	70 Cel		0 Cel		DUAL	R-PDSO-G20
SN74LVC1G98DBVTE4	Texas Instruments	LOGIC CIRCUIT	INDUSTRIAL	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1	CMOS	TR	1.8	3.3	50 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	24 Amp	Gates	.95 mm	85 Cel	3-STATE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	1	5.5 V	1.45 mm	1.6 mm	Not Qualified		1.65 V	e4	30	260	2.9 mm	LVC/LCX/Z

Other Function Logic ICs

Other function logic ICs are electronic circuits that perform various logic functions beyond the basic logic gates and flip-flops. These ICs are designed to perform specific functions, such as encoding, decoding, multiplexing, demultiplexing, and signal conditioning.

Some of the commonly used other function logic ICs include:

1. Encoders: Encoders are digital circuits that convert a set of input signals into a coded output. They are commonly used in digital systems to encode data for transmission or storage. Encoders can be designed using various technologies, including TTL, CMOS, and FPGAs.

2. Decoders: Decoders are digital circuits that convert a coded input into a set of output signals. They are commonly used in digital systems to decode data for processing or display. Decoders can be designed using various technologies, including TTL, CMOS, and FPGAs.

3. Multiplexers: Multiplexers, also known as MUXs, are digital circuits that can select one of several input signals and transmit it to a single output line based on a control signal. They are commonly used in digital systems to reduce the number of transmission lines required to transmit multiple signals. Multiplexers can be designed using various technologies, including TTL, CMOS, and FPGAs.

4. Demultiplexers: Demultiplexers, also known as DEMUXs, are digital circuits that can distribute a single input signal to one of several output lines based on a control signal. They are commonly used in digital systems to receive multiple signals transmitted over a single line. Demultiplexers can be designed using various technologies, including TTL, CMOS, and FPGAs.

5. Comparators: Comparators are digital circuits that compare two input signals and produce a binary output signal indicating the relationship between the two inputs. They are commonly used in digital systems to compare digital values for control and decision-making purposes. Comparators can be designed using various technologies, including TTL, CMOS, and FPGAs.

Other function logic ICs are used in various applications, including digital signal processing, telecommunications, and data storage systems. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.