Fixed Sine SAW & STW Oscillators

Reset All

Part	Manufacturer	Oscillator Type	Mounting Feature	No. of Terminals	Package Body Material	Frequency Tolerance	Maximum Supply Voltage	Maximum Supply Current	Output Power	Nominal Supply Voltage	Phase Noise	Power Supplies (V)	Package Equivalence Code	Sub-Category	Physical Dimension	Minimum Supply Voltage	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Nominal Operating Frequency	Offset Frequency	Qualification	Maximum Harmonics Level	Additional Features	JESD-609 Code
SO-502-BHC-LNN-970.0000MHZ	Microchip Technology	SAW OSCILLATOR	SURFACE MOUNT	6		130 ppm	12.6 V	70 mA	3 dBm	12 V			SMDIP6,.35		13.97mm x 8.89mm x 4.49mm	11.4 V	70 Cel	0 Cel	GOLD OVER NICKEL	970 MHz				MIL-STD-883	e4
SO-502-BKF-TNN-1200.0000MHZ	Microchip Technology																		Gold (Au) - with Nickel (Ni) barrier						e4
PS-7011-EEE-2541-2000M0	Vectron International	SAW OSCILLATOR
SO-502-DGC-LNN-938.0000MHZ	Vectron International	SAW OSCILLATOR	SURFACE MOUNT	6		130 ppm	3.45 V	70 mA	0 dBm	3.3 V			SMDIP6,.3		13.97mm x 8.89mm x 4.49mm	3.135 V	70 Cel	0 Cel	Gold (Au) - with Nickel (Ni) barrier	938 MHz			-20 dBc	MIL-STD-883	e4
PS-5080-DEX-204X-2187M5	Vectron International	SAW OSCILLATOR
PS-7010-DEE-254X-1968M75	Microchip Technology	SAW OSCILLATOR	SURFACE MOUNT	4		250 ppm	5.25 V	50 mA	7 dBm	5 V	-113 dBc/Hz				7.0mm x 5.0mm x 2.5mm	4.75 V	85 Cel	-40 Cel		1968.75 MHz	1 kHz		-20 dBc	TR
PS-5020-DEE-WXX1-1350M00000	Microchip Technology	SAW OSCILLATOR	SURFACE MOUNT	6			5.25 V	70 mA	3 dBm	5 V			SMDIP6,.35		13.97mm x 8.89mm x 4.49mm	4.75 V	85 Cel	-40 Cel		1350 MHz			-20 dBc
PS-5080-DFE-204X-2068M675135	Microsemi	SAW OSCILLATOR	SURFACE MOUNT	10		200 ppm	5.25 V	65 mA		5 V					14.4mm x 9.5mm x 4.9mm	4.75 V	85 Cel	-40 Cel		2068.675135 MHz				COMPLEMENTARY OUTPUT; TR, 13 INCH
PS-5011-DFE-204X-2104M658326	Microchip Technology	SAW OSCILLATOR	SURFACE MOUNT	6		200 ppm	5.25 V	65 mA	3 dBm	5 V	-112 dBc/Hz				14.4mm x 9.5mm x 4.9mm	4.75 V	85 Cel	-40 Cel		2104.658326 MHz	1 kHz		-25 dBc	COMPLEMENTARY OUTPUT; TR, 13 INCH
PS-7010-EEX-2541-1687M5	Vectron International	SAW OSCILLATOR
SO-502-DGF-TNN-480.0000MHZ	Microchip Technology
SO-502-DHF-TNN-1000.0000MHZ	Microchip Technology
PS-5080-EEE-204X-832M00	Microchip Technology	SAW OSCILLATOR	SURFACE MOUNT	10		200 ppm	3.465 V		.893 dBm	3.3 V	-112 dBc/Hz		DILCC10,.37,152/100		14.4mm x 9.5mm x 4.9mm	3.135 V	85 Cel	-40 Cel		832 MHz	1 kHz		-30 dBc
PS-5010-EFE-204X-1701M32	Microchip Technology	SAW OSCILLATOR	SURFACE MOUNT	6		200 ppm	3.465 V	100 mA	3 dBm	3.3 V	-112 dBc/Hz				14.4mm x 9.5mm x 2.8mm	3.135 V	85 Cel	-40 Cel		1701.32 MHz	1 kHz		-30 dBc	COMPLEMENTARY OUTPUT; TR, 13 INCH
PS-5080-EFX-204X-1769M145	Microchip Technology	SAW OSCILLATOR	SURFACE MOUNT	10		200 ppm	3.465 V		.893 dBm	3.3 V	-112 dBc/Hz		DILCC10,.37,152/100		14.4mm x 9.5mm x 4.9mm	3.135 V	85 Cel	10 Cel		1769.145 MHz	1 kHz		-30 dBc
PS-7010-DEE-254X-1748M366885	Microsemi	SAW OSCILLATOR	SURFACE MOUNT	4		250 ppm	5.25 V	50 mA	7 dBm	5 V	-113 dBc/Hz				7.0mm x 5.0mm x 2.5mm	4.75 V	85 Cel	-40 Cel		1748.366885 MHz	1 kHz		-20 dBc	TR
PS-7010-DEE-254X-1884M052863	Vectron International
SO-502-BGF-TNN-1090.0000MHZ	Microsemi	SAW OSCILLATOR	SURFACE MOUNT	6		200 ppm	12.6 V	70 mA	0 dBm	12 V			SMDIP6,.3		13.97mm x 8.89mm x 4.49mm	11.4 V	85 Cel	-40 Cel	Gold (Au) - with Nickel (Ni) barrier	1090 MHz			-20 dBc	MIL-STD-883	e4
SO-502-CKD-TNN-1000.0000MHZ	Microchip Technology																		Gold (Au) - with Nickel (Ni) barrier						e4
PS-5011-DFE-204X-2949M12	Microsemi	SAW OSCILLATOR	SURFACE MOUNT	6		200 ppm	5.25 V	65 mA	3 dBm	5 V	-112 dBc/Hz				14.4mm x 9.5mm x 4.9mm	4.75 V	85 Cel	-40 Cel		2949.12 MHz	1 kHz		-25 dBc	COMPLEMENTARY OUTPUT; TR, 13 INCH
PS-7010-DEX-2541-1961M209118	Microsemi	SAW OSCILLATOR
PS-7010-EEE-2541-1769M145	Microchip Technology	SAW OSCILLATOR	SURFACE MOUNT	4		250 ppm	3.465 V		7 dBm	3.3 V	-113 dBc/Hz		DILCC4,.2,200		7mm x 5mm x 2.5mm	3.135 V	85 Cel	-40 Cel		1769.145 MHz	1 kHz		-20 dBc	MIL-STD-883; MIL-STD-883G; MIL-883-1010
SO-502-BHC-LNN-640.0000MHZ	Microsemi	SAW OSCILLATOR	SURFACE MOUNT	6		130 ppm	12.6 V	70 mA	3 dBm	12 V			SMDIP6,.3		13.97mm x 8.89mm x 4.49mm	11.4 V	70 Cel	0 Cel	Gold (Au) - with Nickel (Ni) barrier	640 MHz			-20 dBc	MIL-STD-883	e4
SO-502-CHC-LNN-1350.0000MHZ	Microsemi	SAW OSCILLATOR	SURFACE MOUNT	6		130 ppm	5.25 V	70 mA	3 dBm	5 V			SMDIP6,.3		13.97mm x 8.89mm x 4.49mm	4.75 V	70 Cel	0 Cel	Gold (Au) - with Nickel (Ni) barrier	1350 MHz			-20 dBc	MIL-STD-883	e4
PS-5080-DEX-204X-2000M0	Microchip Technology	SAW OSCILLATOR	SURFACE MOUNT	10		200 ppm	5.25 V		.893 dBm	5 V	-112 dBc/Hz		DILCC10,.37,152/100		14.4mm x 9.5mm x 4.9mm	4.75 V	85 Cel	10 Cel		2000 MHz	1 kHz		-20 dBc
PS-5080-EFE-204X-1568M97921	Vectron International
SO-502-BJC-LNN-1000.0000MHZ	Microsemi	SAW OSCILLATOR	SURFACE MOUNT	6		130 ppm	12.6 V	70 mA	7 dBm	12 V	-100 dBc/Hz		SMDIP6,.3		13.97mm x 8.89mm x 4.49mm	11.4 V	70 Cel	0 Cel	Gold (Au) - with Nickel (Ni) barrier	1000 MHz	1 kHz		-20 dBc	MIL-STD-883	e4
PS-5080-DEX-204X-2068M675135	Microsemi
PS-7011-DEE-254X-1961M209118	Vectron International
SO-502-DKC-LNN-622.0800MHZ	Microchip Technology	SAW OSCILLATOR	SURFACE MOUNT	6		130 ppm	3.465 V	70 mA	10 dBm	3.3 V	-100 dBc/Hz		SMDIP6,.35		13.97mm x 8.89mm x 4.49mm	3.135 V	70 Cel	0 Cel	GOLD OVER NICKEL	622.08 MHz	1 kHz			MIL-STD-883	e4
SO-502-CKC-TNN-640.0000MHZ	Microchip Technology
PS-5080-EFX-204X-2000M0	Microsemi
SO-502-BGC-TNN-1350.0000MHZ	Microchip Technology
SO-502-BKD-TNN-622.0800MHZ	Microchip Technology
PS-7010-EEX-254X-1986M819383	Microsemi
PS-5011-EEE-204X-1568M97921	Microsemi	SAW OSCILLATOR	SURFACE MOUNT	6		200 ppm	3.465 V	100 mA	3 dBm	3.3 V	-112 dBc/Hz				14.4mm x 9.5mm x 4.9mm	3.135 V	85 Cel	-40 Cel		1568.97921 MHz	1 kHz		-30 dBc	TR, 13 INCH
PS-5080-DFX-204X-1986M819383	Microsemi	SAW OSCILLATOR
PS-5080-EEX-204X-1040M0	Vectron International	SAW OSCILLATOR
PS-5080-DFE-204X-2104M658326	Microchip Technology	SAW OSCILLATOR	SURFACE MOUNT	10		200 ppm	5.25 V	65 mA		5 V					14.4mm x 9.5mm x 4.9mm	4.75 V	85 Cel	-40 Cel		2104.658326 MHz				COMPLEMENTARY OUTPUT; TR, 13 INCH
HO1081	Murata Manufacturing	SAW OSCILLATOR	THROUGH HOLE MOUNT	8	METAL			40 mA		12 V		12	DIP8/16,.3	Other Oscillators			105 Cel	-55 Cel		1090 MHz		Not Qualified
PS-5010-DFE-204X-1875M0	Microchip Technology	SAW OSCILLATOR	SURFACE MOUNT	6		200 ppm	5.25 V	65 mA	3 dBm	5 V	-112 dBc/Hz				14.4mm x 9.5mm x 2.8mm	4.75 V	85 Cel	-40 Cel		1875 MHz	1 kHz		-30 dBc	COMPLEMENTARY OUTPUT; TR, 13 INCH
PS-5010-EEE-204X-2068M675135	Microchip Technology	SAW OSCILLATOR	SURFACE MOUNT	6		200 ppm	3.465 V	100 mA	3 dBm	3.3 V	-112 dBc/Hz				14.4mm x 9.5mm x 2.8mm	3.135 V	85 Cel	-40 Cel		2068.675135 MHz	1 kHz		-25 dBc	TR, 13 INCH
SO-502-BJC-TNN-938.0000MHZ	Microchip Technology
PS-7010-EEX-2541-1769M145	Microchip Technology	SAW OSCILLATOR	SURFACE MOUNT	4		250 ppm	3.465 V		7 dBm	3.3 V	-113 dBc/Hz		DILCC4,.2,200		7mm x 5mm x 2.5mm	3.135 V	85 Cel	10 Cel		1769.145 MHz	1 kHz		-20 dBc	MIL-STD-883; MIL-STD-883G; MIL-883-1010
SO-502-DGC-LNN-990.0000MHZ	Vectron International	SAW OSCILLATOR	SURFACE MOUNT	6		130 ppm	3.45 V	70 mA	0 dBm	3.3 V			SMDIP6,.3		13.97mm x 8.89mm x 4.49mm	3.135 V	70 Cel	0 Cel	Gold (Au) - with Nickel (Ni) barrier	990 MHz			-20 dBc	MIL-STD-883	e4
SO-502-CKF-TNN-1090.0000MHZ	Microchip Technology	SAW OSCILLATOR	SURFACE MOUNT	6		200 ppm	5.25 V	70 mA	10 dBm	5 V			SMDIP6,.35		13.97mm x 8.89mm x 4.49mm	4.75 V	85 Cel	-40 Cel	GOLD OVER NICKEL	1090 MHz				MIL-STD-883	e4
PS-5012-DFE-204X-867M1875	Microchip Technology	SAW OSCILLATOR	SURFACE MOUNT	6		200 ppm	5.25 V	65 mA	3 dBm	5 V	-112 dBc/Hz				14.4mm x 9.5mm x 2.3mm	4.75 V	85 Cel	-40 Cel		867.1875 MHz	1 kHz		-30 dBc	COMPLEMENTARY OUTPUT; TR, 13 INCH
PS-7010-DEX-254X-1769M145	Microsemi	SAW OSCILLATOR

Fixed Sine SAW (Surface Acoustic Wave) and STW (Stacked-Waveguide) oscillators are electronic devices that generate stable sine wave signals for use in a variety of applications, such as communication systems, test and measurement equipment, and frequency synthesizers. They use different types of resonators to generate a stable sine wave signal.

SAW oscillators use a SAW resonator, which is a device that uses acoustic waves to generate a stable frequency. The resonator is designed to produce a sine wave signal by shaping the acoustic waves as they propagate through the substrate material. SAW oscillators offer high frequency stability and low phase noise, making them suitable for use in communication systems.

STW oscillators use a stacked-waveguide resonator, which is a type of resonator that consists of multiple layers of waveguide material arranged in a specific configuration. When an electric field is applied to the resonator, it generates a stable sine wave signal. STW oscillators offer high frequency stability, low phase noise, and low power consumption, making them suitable for use in low-noise oscillator circuits.