Part | RoHS | Manufacturer | Oscillator Type | Mounting Feature | No. of Terminals | Frequency Stability | Package Body Material | Tuning Range | Maximum Supply Voltage | Technology | Maximum Supply Current | Output Power | Nominal Supply Voltage | Phase Noise | Power Supplies (V) | Package Equivalence Code | Power Variation | Sub-Category | Physical Dimension | Minimum Supply Voltage | Maximum Operating Temperature | Minimum Operating Temperature | Terminal Finish | Nominal Operating Frequency | Offset Frequency | Manufacturer Series | Qualification | Maximum Harmonics Level | Additional Features | JESD-609 Code | Minimum Operating Frequency | Maximum Operating Frequency |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Spectrum Control |
MECHANICAL TUNED DRO OSCILLATOR |
THROUGH HOLE MOUNT |
165 % |
25 MHz |
15 V |
125 mA |
11 dBm |
-110 dBc/Hz |
1 dB |
38.1mm x 25.4mm x 23.62mm |
10.5 V |
80 Cel |
-10 Cel |
10667 MHz |
100 kHz |
-20 dBc |
SMA FEMALE CONNECTOR |
|||||||||||||||
Api Technologies |
MECHANICAL TUNED DRO OSCILLATOR |
THROUGH HOLE MOUNT |
165 % |
25 MHz |
15 V |
125 mA |
11 dBm |
-110 dBc/Hz |
1 dB |
38.1mm x 25.4mm x 23.62mm |
10.5 V |
80 Cel |
-10 Cel |
10667 MHz |
100 kHz |
-20 dBc |
SMA FEMALE CONNECTOR |
|||||||||||||||
Api Technologies |
MECHANICAL TUNED DRO OSCILLATOR |
THROUGH HOLE MOUNT |
165 % |
25 MHz |
15 V |
125 mA |
11 dBm |
-110 dBc/Hz |
1 dB |
38.1mm x 25.4mm x 23.62mm |
10.5 V |
80 Cel |
-10 Cel |
9953.28 MHz |
100 kHz |
-20 dBc |
SMA FEMALE CONNECTOR |
Tuned DRO (Dielectric Resonator Oscillator) and CRO (Crystal Resonator Oscillator) are types of microwave oscillators used in communication systems, radar systems, and other applications that require a stable and precise frequency source.
Tuned DROs use a dielectric resonator, which is a ceramic block with high dielectric constant, as the frequency reference. The dielectric resonator is excited by a high-Q circuit, such as a varactor diode, and the oscillator frequency is tuned by varying the voltage applied to the varactor diode. Tuned DROs have a high frequency stability and can generate frequencies in the range of several gigahertz.
CROs, on the other hand, use a quartz crystal resonator as the frequency reference. The crystal resonator is cut in a specific orientation and shape that allows it to vibrate at a specific frequency. The oscillator circuit is designed to amplify the crystal's natural vibrations, resulting in a stable and precise oscillator frequency. CROs have a lower frequency stability than DROs, but they can generate frequencies up to several hundred megahertz.