Part | RoHS | Manufacturer | Other IC type | Temperature Grade | No. of Terminals | Package Code | Package Shape | Surface Mount | Package Body Material | Maximum Supply Current (Isup) | Maximum Output Current | No. of Functions | No. of Channels | Technology | Screening Level | Terminal Form | Nominal Negative Supply Voltage (Vsup) | Nominal Supply Voltage (Vsup) | Power Supplies (V) | Package Style (Meter) | Package Equivalence Code | Sub-Category | Terminal Pitch | Maximum Operating Temperature | Minimum Operating Temperature | Terminal Finish | Maximum Output Voltage | Terminal Position | JESD-30 Code | Moisture Sensitivity Level (MSL) | Maximum Supply Voltage (Vsup) | Maximum Seated Height | Width (mm) | Qualification | Minimum Supply Voltage (Vsup) | Additional Features | Minimum Input Voltage | JESD-609 Code | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Length | Adjustable Threshold | Maximum Input Voltage |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Microchip Technology |
BRUSHLESS DC MOTOR CONTROLLER |
52 |
HVQCCN |
SQUARE |
YES |
UNSPECIFIED |
4.4 mA |
1 |
CMOS |
NO LEAD |
5 V |
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE |
LCC52,.31SQ,20 |
.5 mm |
125 Cel |
-40 Cel |
QUAD |
S-XQCC-N52 |
5.25 V |
.9 mm |
8 mm |
4.75 V |
NOT SPECIFIED |
NOT SPECIFIED |
8 mm |
|||||||||||||||||
Onsemi |
OTHER |
52 |
QCCN |
SQUARE |
YES |
PLASTIC/EPOXY |
BICMOS |
NO LEAD |
5 V |
5 |
CHIP CARRIER |
LCC52,.28SQ,16 |
Motion Control Electronics |
.4 mm |
85 Cel |
-20 Cel |
QUAD |
S-PQCC-N52 |
Not Qualified |
||||||||||||||||||||||||
|
Onsemi |
STEPPER MOTOR CONTROLLER |
AUTOMOTIVE |
52 |
HVQCCN |
SQUARE |
YES |
UNSPECIFIED |
8 mA |
1.6 A |
1 |
NO LEAD |
12 V |
5,6/30 |
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE |
LCC52,.31SQ,20 |
Motion Control Electronics |
.5 mm |
125 Cel |
-40 Cel |
QUAD |
S-XQCC-N52 |
30 V |
1 mm |
8 mm |
Not Qualified |
6 V |
8 mm |
|||||||||||||||
|
Onsemi |
STEPPER MOTOR CONTROLLER |
AUTOMOTIVE |
52 |
HVQCCN |
SQUARE |
YES |
UNSPECIFIED |
8 mA |
1.6 A |
1 |
NO LEAD |
12 V |
5,6/30 |
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE |
LCC52,.31SQ,20 |
Motion Control Electronics |
.5 mm |
125 Cel |
-40 Cel |
QUAD |
S-XQCC-N52 |
30 V |
1 mm |
8 mm |
Not Qualified |
6 V |
8 mm |
|||||||||||||||
NXP Semiconductors |
BRUSHLESS DC MOTOR CONTROLLER |
COMMERCIAL |
52 |
QCCJ |
SQUARE |
YES |
PLASTIC/EPOXY |
1.8 A |
1 |
J BEND |
5 V |
CHIP CARRIER |
70 Cel |
0 Cel |
QUAD |
S-PQCC-J52 |
5.5 V |
Not Qualified |
4.5 V |
CAN ALSO BE OPERATED AT 10.8 TO 13.2V, 1.2A IS AVAILABLE FOR VOICE COIL MOTOR DRIVER |
|||||||||||||||||||||||
NXP Semiconductors |
VOICE COIL MOTOR CONTROLLER |
COMMERCIAL |
52 |
QCCJ |
SQUARE |
YES |
PLASTIC/EPOXY |
1 |
J BEND |
5 V |
5,12 |
CHIP CARRIER |
LDCC52,.8SQ |
Motion Control Electronics |
1.27 mm |
70 Cel |
0 Cel |
QUAD |
S-PQCC-J52 |
5.5 V |
Not Qualified |
4.5 V |
|||||||||||||||||||||
NXP Semiconductors |
VOICE COIL MOTOR CONTROLLER |
COMMERCIAL |
52 |
QCCJ |
SQUARE |
YES |
PLASTIC/EPOXY |
1 |
J BEND |
5 V |
CHIP CARRIER |
70 Cel |
0 Cel |
QUAD |
S-PQCC-J52 |
5.5 V |
Not Qualified |
4.5 V |
|||||||||||||||||||||||||
NXP Semiconductors |
INDUSTRIAL |
52 |
QFP |
SQUARE |
YES |
PLASTIC/EPOXY |
10 mA |
GULL WING |
9/16 |
FLATPACK |
QFP52,.47SQ |
Motion Control Electronics |
.635 mm |
85 Cel |
-40 Cel |
QUAD |
S-PQFP-G52 |
Not Qualified |
|||||||||||||||||||||||||
Infineon Technologies |
BRUSHLESS DC MOTOR CONTROLLER |
52 |
RECTANGULAR |
YES |
CERAMIC, METAL-SEALED COFIRED |
FLAT |
FLATPACK |
DUAL |
R-CDFP-F52 |
Not Qualified |
|||||||||||||||||||||||||||||||||
|
Toshiba |
BRUSHLESS DC MOTOR CONTROLLER |
OTHER |
52 |
QFP |
SQUARE |
YES |
PLASTIC/EPOXY |
16 mA |
.002 A |
1 |
BICMOS |
GULL WING |
15 V |
15 |
FLATPACK |
QFP52,.52SQ |
Motion Control Electronics |
.65 mm |
115 Cel |
-30 Cel |
QUAD |
S-PQFP-G52 |
16.5 V |
2.45 mm |
10 mm |
Not Qualified |
6.5 V |
NOT SPECIFIED |
NOT SPECIFIED |
10 mm |
||||||||||||
|
Toshiba |
BRUSHLESS DC MOTOR CONTROLLER |
OTHER |
52 |
QFP |
SQUARE |
YES |
PLASTIC/EPOXY |
22.5 mA |
.025 A |
1 |
BICMOS |
GULL WING |
24 V |
24 |
FLATPACK |
QFP52,.52SQ |
Motion Control Electronics |
.65 mm |
85 Cel |
-30 Cel |
QUAD |
S-PQFP-G52 |
28 V |
2.45 mm |
10 mm |
Not Qualified |
10 V |
NOT SPECIFIED |
NOT SPECIFIED |
10 mm |
||||||||||||
|
Toshiba |
BRUSHLESS DC MOTOR CONTROLLER |
OTHER |
52 |
QFP |
SQUARE |
YES |
PLASTIC/EPOXY |
18 mA |
20 A |
1 |
BICMOS |
GULL WING |
24 V |
24 |
FLATPACK |
QFP52,.52SQ |
Motion Control Electronics |
.65 mm |
85 Cel |
-30 Cel |
QUAD |
S-PQFP-G52 |
28 V |
2.45 mm |
10 mm |
Not Qualified |
10 V |
NOT SPECIFIED |
NOT SPECIFIED |
10 mm |
||||||||||||
Renesas Electronics |
BRUSHLESS DC MOTOR CONTROLLER |
COMMERCIAL EXTENDED |
52 |
SSOP |
RECTANGULAR |
YES |
PLASTIC/EPOXY |
1 |
GULL WING |
5 V |
SMALL OUTLINE, SHRINK PITCH |
.65 mm |
75 Cel |
0 Cel |
DUAL |
R-PDSO-G52 |
5.5 V |
2.2 mm |
8.4 mm |
Not Qualified |
4.5 V |
17.5 mm |
Motion control ICs are electronic components designed to control and regulate the movement of mechanical systems. They are used in a wide range of applications, including robotics, manufacturing equipment, and aerospace systems.
Motion control ICs use various technologies to control motion, including microcontrollers, motor drivers, and sensors. They can be used to control the speed, position, and direction of motors, actuators, and other mechanical systems.
One of the main applications of motion control ICs is in robotics, where they are used to control the movement of robot arms, legs, and other components. They can also be used in manufacturing equipment to control the movement of conveyor belts, assembly lines, and other machinery.
Motion control ICs can provide high levels of precision and accuracy in controlling motion. They are often designed to operate in harsh environments and can withstand high temperatures, vibration, and shock.