YES Motion Control ICs 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	Technology	Screening Level	Terminal Form	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
AMIS-30623BAGA	Onsemi	STEPPER MOTOR CONTROLLER	AUTOMOTIVE	20	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		.8 A	1			GULL WING		5,6.5/29	SMALL OUTLINE	SOP20,.4	Motion Control Electronics	1.27 mm	125 Cel	-40 Cel		DUAL	R-PDSO-G20		29 V	2.6416 mm	7.52 mm	Not Qualified	8 V					12.7762 mm
AMIS30422C422G	Onsemi	STEPPER MOTOR CONTROLLER	AUTOMOTIVE	48	HVQCCN	SQUARE	YES	UNSPECIFIED	20 mA		1			NO LEAD		3.3,6/30	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.28SQ,20	Motion Control Electronics	.5 mm	125 Cel	-40 Cel	TIN	QUAD	S-XQCC-N48	3	30 V	1 mm	7 mm	Not Qualified	6 V		e3			7 mm
NCV7703D2R2G	Onsemi	BRUSH DC MOTOR CONTROLLER		14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	4 mA	1 A	1			GULL WING	5 V	3.3/5,5.5/40	SMALL OUTLINE	SOP14,.25	Motion Control Electronics	1.27 mm			TIN	DUAL	R-PDSO-G14		5.25 V	1.75 mm	3.9 mm	Not Qualified	3 V	ALSO REQUIRES DRIVER SUPPLY 5.5 TO 40 VOLTS	e3		260	8.65 mm
LV8414CS-NTE-L-H	Onsemi	STEPPER MOTOR CONTROLLER	OTHER	32	VFBGA	SQUARE	YES	PLASTIC/EPOXY	3 mA	.6 A	1	BICMOS		BALL	3.3 V	3.3,5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA32,6X6,16	Motion Control Electronics	.4 mm	85 Cel	-30 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B32	1	5.5 V	.65 mm	2.47 mm	Not Qualified	2.5 V		e1	30	260	2.47 mm
LV8760T	Onsemi	BRUSH DC MOTOR CONTROLLER	OTHER	20	HTSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	4 mA	4 A	1	BICMOS		GULL WING	5 V	5,24	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Motion Control Electronics	.65 mm	85 Cel	-20 Cel		DUAL	R-PDSO-G20		5.5 V	1.2 mm	4.4 mm	Not Qualified	3 V	ALSO OPERATES IN 9 TO 35V SUPPLY				6.5 mm
LB1948MC-ZH	Onsemi		OTHER	10	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	40 mA			BIPOLAR		GULL WING	5 V	5	SMALL OUTLINE, SHRINK PITCH	SOP10,.25,40	Motion Control Electronics	1 mm	85 Cel	-20 Cel	Tin/Silver (Sn/Ag)	DUAL	R-PDSO-G10	3				Not Qualified			e2
LA6585MC	Onsemi	BRUSHLESS DC MOTOR CONTROLLER	OTHER	10	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		.7 A	1			GULL WING	12 V		SMALL OUTLINE, SHRINK PITCH			1 mm	90 Cel	-30 Cel		DUAL	R-PDSO-G10		14 V	1.75 mm	3.9 mm		2.2 V					4.9 mm
LA6581T-TE-L-H	Onsemi	BRUSHLESS DC MOTOR CONTROLLER	OTHER	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY	19 mA	.3 A	1	BIPOLAR		GULL WING	12 V	12	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Motion Control Electronics	.65 mm	90 Cel	-20 Cel	TIN BISMUTH	DUAL	S-PDSO-G8	1	16 V	1.1 mm	3 mm	Not Qualified	2.5 V		e6			3 mm
NCV70514MW003G	Onsemi	STEPPER MOTOR CONTROLLER		32	HVQCCN	SQUARE	YES	UNSPECIFIED			1			NO LEAD	14 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm				QUAD	S-XQCC-N32		29 V	1 mm	5 mm		6 V			NOT SPECIFIED	NOT SPECIFIED	5 mm
LV8414CS-TE-L-H	Onsemi	STEPPER MOTOR CONTROLLER	OTHER	32	VFBGA	SQUARE	YES	PLASTIC/EPOXY		.6 A	1	BICMOS		BALL	3.3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	-30 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	S-PBGA-B32	1	5.5 V	.65 mm	2.47 mm		2.5 V		e1			2.47 mm
LA6586FA-AH	Onsemi	BRUSHLESS DC MOTOR CONTROLLER	OTHER	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	9 mA	.6 A	1	BIPOLAR		GULL WING	12 V	12	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Motion Control Electronics	.5 mm	90 Cel	-30 Cel	TIN	DUAL	S-PDSO-G10	3	14 V	1.03 mm	3 mm	Not Qualified	2.2 V	SEATED HGT-NOM	e3	30	260	3 mm
LV8731V-TLM-H	Onsemi	STEPPER MOTOR CONTROLLER	OTHER	44	HLSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	5 mA	2.5 A	1	BCDMOS		GULL WING	24 V	24	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE, SHRINK PITCH	SSOP44,.3	Motion Control Electronics	.65 mm	85 Cel	-20 Cel	TIN BISMUTH	DUAL	R-PDSO-G44	3	32 V	1.7 mm	5.6 mm	Not Qualified	9 V		e6	30	260	15 mm
LV8055LP	Onsemi		OTHER	32	QCCN	SQUARE	YES	PLASTIC/EPOXY	1.5 mA			BICMOS		NO LEAD		3.3,5	CHIP CARRIER	LCC32,.16SQ,16	Motion Control Electronics	.4 mm	85 Cel	-20 Cel		QUAD	S-PQCC-N32					Not Qualified
NCV70627MW002R2G	Onsemi	STEPPER MOTOR CONTROLLER		32	HVQCCN	SQUARE	YES	UNSPECIFIED		1.1 A	1			NO LEAD	14 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm			TIN	QUAD	S-XQCC-N32	3	29 V	1 mm	5 mm		5.5 V		e3	30	260	5 mm
NCV70522MN003R2G	Onsemi	STEPPER MOTOR CONTROLLER	AUTOMOTIVE	32	HVQCCN	SQUARE	YES	UNSPECIFIED	12 mA	1.6 A	1			NO LEAD	12 V	6/30	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.27SQ,25	Motion Control Electronics	.65 mm	125 Cel	-40 Cel	TIN	QUAD	S-XQCC-N32	3	30 V	.9 mm	7 mm	Not Qualified	6 V		e3	30	260	7 mm
LV8729V-MPB-H	Onsemi	STEPPER MOTOR CONTROLLER	OTHER	44	HLSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	4.6 mA	1.8 A	1	BICMOS		GULL WING	24 V	24	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE, SHRINK PITCH	SSOP44,.3	Motion Control Electronics	.65 mm	85 Cel	-30 Cel	TIN BISMUTH	DUAL	R-PDSO-G44	3	32 V	1.7 mm	5.6 mm	Not Qualified	9 V		e6	30	260	15 mm
LB1923M	Onsemi		COMMERCIAL EXTENDED	44	QFP	SQUARE	YES	PLASTIC/EPOXY	60 mA			BIPOLAR		GULL WING	5 V	5	FLATPACK	QFP44,.5SQ,32	Motion Control Electronics	.8 mm	80 Cel	-20 Cel		QUAD	S-PQFP-G44					Not Qualified
LV8062FA-BH	Onsemi	BRUSH DC MOTOR CONTROLLER	OTHER	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	3 mA	.7 A	1	BICMOS		GULL WING	5 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Motion Control Electronics	.5 mm	95 Cel	-30 Cel		DUAL	S-PDSO-G10		6 V	1.03 mm	3 mm	Not Qualified	2.5 V	OUTPUT CURRENT IN LOCK-DETECTION MODE IS 1A, SEATED HGT-NOM		NOT SPECIFIED	NOT SPECIFIED	3 mm
LA6581MC-BH	Onsemi	BRUSHLESS DC MOTOR CONTROLLER	OTHER	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	19 mA	.5 A	1	BIPOLAR		GULL WING	12 V	12	SMALL OUTLINE	SOP8,.25	Motion Control Electronics	1.27 mm	100 Cel	-30 Cel	TIN	DUAL	R-PDSO-G8	1	16 V	1.75 mm	3.9 mm	Not Qualified	2.2 V		e3	30	260	4.9 mm
NCV70516DQ0R2G	Onsemi	STEPPER MOTOR CONTROLLER	AUTOMOTIVE	24	HLSSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1			GULL WING	14 V		SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE, SHRINK PITCH	SSOP24,.24		.65 mm	145 Cel	-40 Cel		DUAL	R-PDSO-G24		29 V	1.7 mm	3.9 mm		6 V			NOT SPECIFIED	NOT SPECIFIED	8.64 mm
LV8400V-TLM-E	Onsemi	BRUSH DC MOTOR CONTROLLER	OTHER	16	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		3.8 A	1	BICMOS		GULL WING	5 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.65 mm	85 Cel	-20 Cel	TIN BISMUTH	DUAL	R-PDSO-G16	3	5.5 V	1.5 mm	4.4 mm		2.7 V		e6	30	260	5.2 mm
LB1935FA	Onsemi	STEPPER MOTOR CONTROLLER	COMMERCIAL EXTENDED	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY			1			GULL WING	3.3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.5 mm	75 Cel	-20 Cel		DUAL	S-PDSO-G10		7.5 V	1.03 mm	3 mm		2.2 V					3 mm
NCV70517MW002R2G	Onsemi	STEPPER MOTOR CONTROLLER		32	HVQCCN	SQUARE	YES	UNSPECIFIED			1			NO LEAD	14 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm			MATTE TIN	QUAD	S-XQCC-N32	1	29 V	1 mm	5 mm		6 V		e3	30	260	5 mm
LB1930MC-BH	Onsemi	BRUSH DC MOTOR CONTROLLER	OTHER	10	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1 A	1			GULL WING	3 V		SMALL OUTLINE, SHRINK PITCH			1 mm	85 Cel	-30 Cel	Tin (Sn)	DUAL	R-PDSO-G10	1	10.8 V	1.75 mm	3.9 mm		2.2 V		e3			4.9 mm
LV8048CS	Onsemi	STEPPER MOTOR CONTROLLER	OTHER	36	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		.8 A	1	BICMOS		BALL	3.3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	-20 Cel		BOTTOM	R-PBGA-B36		5.5 V	.65 mm	2.47 mm		2.7 V	ALSO OPERATES AT 5V				2.87 mm
LB1861M	Onsemi		COMMERCIAL EXTENDED	14	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	50 mA					GULL WING		12/24	SMALL OUTLINE, SHRINK PITCH	SOP14,.25,40	Motion Control Electronics	1 mm	80 Cel	-30 Cel		DUAL	R-PDSO-G14					Not Qualified
LV8063FA	Onsemi	BRUSH DC MOTOR CONTROLLER	OTHER	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		.7 A	1	BICMOS		GULL WING	5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.5 mm	95 Cel	-30 Cel		DUAL	S-PDSO-G10		6 V	1.03 mm	3 mm		2.5 V	OUTPUT CURRENT IN LOCK-DETECTION MODE IS 1A, SEATED HGT-NOM				3 mm
LB1935T	Onsemi		COMMERCIAL EXTENDED	10	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	19 mA			BIPOLAR		GULL WING	3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Motion Control Electronics	.5 mm	75 Cel	-20 Cel		DUAL	R-PDSO-G10					Not Qualified
LB1861M-MPB-E	Onsemi	BRUSHLESS DC MOTOR CONTROLLER	COMMERCIAL EXTENDED	14	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	50 mA	1.5 A	1			GULL WING	6.7 V	12/24	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SOP14,.25,40	Motion Control Electronics	1 mm	80 Cel	-30 Cel	Tin/Bismuth (Sn/Bi)	DUAL	R-PDSO-G14	3	7 V	1.7 mm	4.4 mm	Not Qualified	6.4 V		e6			8 mm
LB1863M-MPB-H	Onsemi	BRUSHLESS DC MOTOR CONTROLLER	COMMERCIAL EXTENDED	14	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	50 mA	1.5 A	1			GULL WING	6.7 V	24	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SOP14,.25,40	Motion Control Electronics	1 mm	80 Cel	-30 Cel	Tin/Bismuth (Sn/Bi)	DUAL	R-PDSO-G14	3	7 V	1.7 mm	4.4 mm	Not Qualified	6.4 V		e6			8 mm
LB1938FA	Onsemi	BRUSHLESS DC MOTOR CONTROLLER	OTHER	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		.8 A	1			GULL WING	3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-30 Cel		DUAL	S-PDSO-G8		10 V	1.1 mm	3 mm		2.2 V					3 mm
LB1938FA-AH	Onsemi	BRUSHLESS DC MOTOR CONTROLLER	OTHER	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY	29 mA	.8 A	1	BIPOLAR		GULL WING	3 V	3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Motion Control Electronics	.65 mm	85 Cel	-30 Cel	TIN	DUAL	S-PDSO-G8	3	10 V	1.1 mm	3 mm	Not Qualified	2.2 V		e3	30	260	3 mm
NCV7702BDWG	Onsemi	STEPPER MOTOR CONTROLLER	AUTOMOTIVE	24	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	40 mA		2			GULL WING		7/16	SMALL OUTLINE	SOP24,.4	Motion Control Electronics	1.27 mm	125 Cel	-40 Cel	TIN	DUAL	R-PDSO-G24	3	16 V	2.65 mm	7.5 mm	Not Qualified	7 V		e3		260	15.395 mm
LV8405V-TLM-E	Onsemi		OTHER	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.2 mA			BICMOS		GULL WING		3,6	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Motion Control Electronics	.635 mm	85 Cel	-20 Cel	TIN BISMUTH	DUAL	R-PDSO-G16	3				Not Qualified			e6	30	260
AMIS-30623-PNA	Onsemi	STEPPER MOTOR CONTROLLER	AUTOMOTIVE	32	QCCN	SQUARE	YES	UNSPECIFIED		.8 A	1			NO LEAD			CHIP CARRIER				125 Cel	-40 Cel		QUAD	S-XQCC-N32		29 V			Not Qualified	8 V
LA6585T	Onsemi		OTHER	8	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	9 mA			BIPOLAR		GULL WING	12 V	12	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Motion Control Electronics	.635 mm	90 Cel	-30 Cel		DUAL	R-PDSO-G8					Not Qualified
LV8729V	Onsemi	STEPPER MOTOR CONTROLLER	OTHER	44	HLSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1.8 A	1	BICMOS		GULL WING	24 V		SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE, SHRINK PITCH			.65 mm	85 Cel	-30 Cel		DUAL	R-PDSO-G44		32 V	1.7 mm	5.6 mm		9 V					15 mm
LV8402GP-H	Onsemi	BRUSH DC MOTOR CONTROLLER	OTHER	24	VQCCN	SQUARE	YES	UNSPECIFIED		2.5 A	1	BICMOS		NO LEAD	3 V		CHIP CARRIER, VERY THIN PROFILE			.5 mm	85 Cel	-30 Cel		QUAD	S-XQCC-N24	1	5.5 V	.8 mm	3.5 mm		2.8 V	ALSO OPERATES WITH THE RANGE OF 1.5V TO 15V SUPPLY				3.5 mm
LB1962M-TLM-E	Onsemi		OTHER	10	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	9.1 mA			BIPOLAR		GULL WING	5 V	5	SMALL OUTLINE, SHRINK PITCH	SOP10,.25,40	Motion Control Electronics	1 mm	90 Cel	-30 Cel	Tin/Bismuth (Sn/Bi)	DUAL	R-PDSO-G10	3				Not Qualified			e6
LA6583MC-CH	Onsemi	BRUSHLESS DC MOTOR CONTROLLER	OTHER	10	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	9 mA	.8 A	1	BIPOLAR		GULL WING	12 V	12	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SOP10,.25,40	Motion Control Electronics	1 mm	100 Cel	-30 Cel	TIN BISMUTH	DUAL	R-PDSO-G10	3	14 V	1.55 mm	4.4 mm	Not Qualified	2.8 V	SEATED HGT-NOM	e6			5 mm
FSB50325A	Onsemi	AC MOTOR CONTROLLER		23		RECTANGULAR	YES	UNSPECIFIED	.2 mA	4.4 A	1			GULL WING	15 V	15	MICROELECTRONIC ASSEMBLY	MODULE,23LEAD,.55	Motion Control Electronics				MATTE TIN	DUAL	R-XDMA-G23	1	16.5 V	3.5 mm	12 mm	Not Qualified	13.5 V		e3			29 mm
LB1937T-MPB-E	Onsemi	STEPPER MOTOR CONTROLLER	OTHER	24	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	16 mA		1	BIPOLAR		GULL WING	5 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25,20	Motion Control Electronics	.5 mm	85 Cel	-30 Cel	TIN BISMUTH	DUAL	R-PDSO-G24	3	9.5 V	1.2 mm	4.4 mm	Not Qualified	2.5 V		e6	30	260	6.5 mm
LV8402GP	Onsemi	BRUSH DC MOTOR CONTROLLER	OTHER	24	VQCCN	SQUARE	YES	UNSPECIFIED		2.5 A	1	BICMOS		NO LEAD	3 V		CHIP CARRIER, VERY THIN PROFILE			.5 mm	85 Cel	-30 Cel		QUAD	S-XQCC-N24	1	5.5 V	.8 mm	3.5 mm		2.8 V	ALSO OPERATES IN 1.5 TO 15V SUPPLY, SEATED HGT-NOM				3.5 mm
NCV7720DQR2G	Onsemi	BRUSH DC MOTOR CONTROLLER	AUTOMOTIVE	24	HSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	5 mA	.55 A	1		AEC-Q100	GULL WING	3.3 V		SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH	SSOP24,.24		.65 mm	125 Cel	-40 Cel	NICKEL GOLD PALLADIUM	DUAL	R-PDSO-G24	2	5.25 V	1.7 mm	3.9 mm		3.15 V			30	260	8.64 mm
NCV7718BDQR2G	Onsemi	BRUSH DC MOTOR CONTROLLER	AUTOMOTIVE	24	HSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	5 mA	.55 A	6	CMOS	AEC-Q100	GULL WING	13.2 V		SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH	SSOP24,.25		.65 mm	125 Cel	-40 Cel	NICKEL GOLD PALLADIUM	DUAL	R-PDSO-G24	2	28 V	1.75 mm	3.9 mm		5.5 V	ALSO REQUIRE 3.15V TO 5.25V		30	260	8.65 mm
NCV7708ADWG	Onsemi	STEPPER MOTOR CONTROLLER		28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	4 mA	1 A	1			GULL WING	3.3 V	3.3/5	SMALL OUTLINE	SOP28,.4	Motion Control Electronics	1.27 mm			TIN	DUAL	R-PDSO-G28		5.25 V	2.65 mm	7.5 mm	Not Qualified	3 V	ALSO OPERATES AT 5V NOMINAL SUPPLY	e3		260	17.925 mm
LB1863M	Onsemi		COMMERCIAL EXTENDED	14	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	50 mA					GULL WING	24 V	24	SMALL OUTLINE, SHRINK PITCH	SOP14,.25,40	Motion Control Electronics	1 mm	80 Cel	-30 Cel		DUAL	R-PDSO-G14					Not Qualified
LB1948MC	Onsemi	STEPPER MOTOR CONTROLLER	OTHER	10	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1.6 A	1			GULL WING	5 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			1 mm	85 Cel	-20 Cel		DUAL	R-PDSO-G10		16 V	1.55 mm	4.4 mm		2.5 V	SEATED HGT-NOM				5 mm

Motion Control ICs

Motion control ICs are electronic components designed to control and regulate the movement of mechanical systems. They are used in a wide range of applications, including robotics, manufacturing equipment, and aerospace systems.

Motion control ICs use various technologies to control motion, including microcontrollers, motor drivers, and sensors. They can be used to control the speed, position, and direction of motors, actuators, and other mechanical systems.

One of the main applications of motion control ICs is in robotics, where they are used to control the movement of robot arms, legs, and other components. They can also be used in manufacturing equipment to control the movement of conveyor belts, assembly lines, and other machinery.

Motion control ICs can provide high levels of precision and accuracy in controlling motion. They are often designed to operate in harsh environments and can withstand high temperatures, vibration, and shock.