Part | RoHS | Manufacturer | Other IC type | Temperature Grade | No. of Terminals | Package Code | Package Shape | Surface Mount | Package Body Material | Maximum Supply Current (Isup) | Maximum Output Current | No. of Functions | No. of Channels | Technology | Screening Level | Terminal Form | Nominal Negative Supply Voltage (Vsup) | Nominal Supply Voltage (Vsup) | Power Supplies (V) | Package Style (Meter) | Package Equivalence Code | Sub-Category | Terminal Pitch | Maximum Operating Temperature | Minimum Operating Temperature | Terminal Finish | Maximum Output Voltage | Terminal Position | JESD-30 Code | Moisture Sensitivity Level (MSL) | Maximum Supply Voltage (Vsup) | Maximum Seated Height | Width (mm) | Qualification | Minimum Supply Voltage (Vsup) | Additional Features | Minimum Input Voltage | JESD-609 Code | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Length | Adjustable Threshold | Maximum Input Voltage |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Analog Devices |
BRUSH DC MOTOR CONTROLLER |
|||||||||||||||||||||||||||||||||||||||||
|
Analog Devices |
BRUSH DC MOTOR CONTROLLER |
INDUSTRIAL |
16 |
HTSSOP |
RECTANGULAR |
YES |
PLASTIC/EPOXY |
2.8 A |
1 |
BICMOS |
GULL WING |
12 V |
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH |
.65 mm |
85 Cel |
-40 Cel |
Matte Tin (Sn) - annealed |
DUAL |
R-PDSO-G16 |
1 |
36 V |
1.1 mm |
4.4 mm |
4.5 V |
e3 |
30 |
260 |
5 mm |
||||||||||||||
|
Analog Devices |
BRUSHLESS DC MOTOR CONTROLLER |
|||||||||||||||||||||||||||||||||||||||||
|
Analog Devices |
BRUSH DC MOTOR CONTROLLER |
INDUSTRIAL |
5 |
LSSOP |
RECTANGULAR |
YES |
PLASTIC/EPOXY |
.12 A |
1 |
GULL WING |
3.6 V |
SMALL OUTLINE, LOW PROFILE, SHRINK PITCH |
.95 mm |
85 Cel |
-40 Cel |
Matte Tin (Sn) - annealed |
DUAL |
R-PDSO-G5 |
1 |
6.5 V |
1.45 mm |
1.625 mm |
2.5 V |
e3 |
30 |
260 |
2.9 mm |
|||||||||||||||
|
Analog Devices |
BRUSH DC MOTOR CONTROLLER |
NOT SPECIFIED |
NOT SPECIFIED |
|||||||||||||||||||||||||||||||||||||||
|
Analog Devices |
BRUSH DC MOTOR CONTROLLER |
NOT SPECIFIED |
NOT SPECIFIED |
|||||||||||||||||||||||||||||||||||||||
|
Analog Devices |
BRUSH DC MOTOR CONTROLLER |
NOT SPECIFIED |
NOT SPECIFIED |
|||||||||||||||||||||||||||||||||||||||
|
Analog Devices |
STEPPER MOTOR CONTROLLER |
|||||||||||||||||||||||||||||||||||||||||
|
Analog Devices |
BRUSHLESS DC MOTOR CONTROLLER |
|||||||||||||||||||||||||||||||||||||||||
|
Analog Devices |
STEPPER MOTOR CONTROLLER |
|||||||||||||||||||||||||||||||||||||||||
|
Analog Devices |
BRUSH DC MOTOR CONTROLLER |
38 |
RECTANGULAR |
YES |
PLASTIC/EPOXY |
1 |
GULL WING |
36 V |
125 Cel |
-40 Cel |
DUAL |
R-PDSO-G8 |
65 V |
4.5 V |
||||||||||||||||||||||||||||
|
Analog Devices |
BRUSH DC MOTOR CONTROLLER |
INDUSTRIAL |
12 |
HVSON |
SQUARE |
YES |
PLASTIC/EPOXY |
1.2 mA |
2.5 A |
1 |
BICMOS |
NO LEAD |
12 V |
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE |
SOLCC12,.11SQ |
.5 mm |
85 Cel |
-40 Cel |
Matte Tin (Sn) - annealed |
DUAL |
S-PDSO-N12 |
1 |
36 V |
.8 mm |
3 mm |
4.5 V |
e3 |
30 |
260 |
3 mm |
||||||||||||
Analog Devices |
BRUSH DC MOTOR CONTROLLER |
||||||||||||||||||||||||||||||||||||||||||
Analog Devices |
BRUSH DC MOTOR CONTROLLER |
||||||||||||||||||||||||||||||||||||||||||
|
Analog Devices |
STEPPER MOTOR CONTROLLER |
|||||||||||||||||||||||||||||||||||||||||
|
Analog Devices |
STEPPER MOTOR CONTROLLER |
44 |
LFQFP |
SQUARE |
YES |
PLASTIC/EPOXY |
2 A |
1 |
CMOS |
GULL WING |
24 V |
FLATPACK, LOW PROFILE |
QFP44,.47SQ,32 |
.8 mm |
125 Cel |
-40 Cel |
QUAD |
S-PQFP-G44 |
59 V |
1.6 mm |
10 mm |
5 V |
it also has 2k ESD wrt application handling |
10 mm |
||||||||||||||||||
|
Analog Devices |
STEPPER MOTOR CONTROLLER |
|||||||||||||||||||||||||||||||||||||||||
|
Analog Devices |
BRUSHLESS DC MOTOR CONTROLLER |
|||||||||||||||||||||||||||||||||||||||||
|
Analog Devices |
BRUSHLESS DC MOTOR CONTROLLER |
INDUSTRIAL |
16 |
SSOP |
RECTANGULAR |
YES |
PLASTIC/EPOXY |
10 mA |
.1 A |
1 |
GULL WING |
5 V |
3.3/5 |
SMALL OUTLINE, SHRINK PITCH |
SSOP16,.25 |
Motion Control Electronics |
.635 mm |
85 Cel |
-40 Cel |
Matte Tin (Sn) - annealed |
DUAL |
R-PDSO-G16 |
1 |
5.5 V |
1.73 mm |
3.9 mm |
Not Qualified |
3 V |
e3 |
30 |
260 |
4.89 mm |
||||||||||
|
Analog Devices |
BRUSHLESS DC MOTOR CONTROLLER |
|||||||||||||||||||||||||||||||||||||||||
|
Analog Devices |
AUTOMOTIVE |
16 |
SOP |
RECTANGULAR |
YES |
PLASTIC/EPOXY |
1 mA |
BICMOS |
GULL WING |
3.3/5 |
SMALL OUTLINE |
SOP16,.25 |
Motion Control Electronics |
1.27 mm |
125 Cel |
-40 Cel |
Matte Tin (Sn) - annealed |
DUAL |
R-PDSO-G16 |
1 |
Not Qualified |
e3 |
30 |
260 |
||||||||||||||||||
|
Analog Devices |
AUTOMOTIVE |
16 |
SOP |
RECTANGULAR |
YES |
PLASTIC/EPOXY |
1 mA |
BICMOS |
GULL WING |
3.3/5 |
SMALL OUTLINE |
SOP16,.25 |
Motion Control Electronics |
1.27 mm |
125 Cel |
-40 Cel |
Matte Tin (Sn) - annealed |
DUAL |
R-PDSO-G16 |
1 |
Not Qualified |
e3 |
30 |
260 |
||||||||||||||||||
|
Analog Devices |
OTHER |
16 |
QCCN |
SQUARE |
YES |
PLASTIC/EPOXY |
1 mA |
BICMOS |
NO LEAD |
3.3 V |
3.3 |
CHIP CARRIER |
LCC16,.20SQ,32 |
Motion Control Electronics |
.8 mm |
125 Cel |
0 Cel |
QUAD |
S-PQCC-N16 |
Not Qualified |
||||||||||||||||||||||
|
Analog Devices |
BRUSHLESS DC MOTOR CONTROLLER |
|||||||||||||||||||||||||||||||||||||||||
|
Analog Devices |
BRUSHLESS DC MOTOR CONTROLLER |
48 |
HTFQFP |
SQUARE |
YES |
PLASTIC/EPOXY |
15 mA |
100 A |
1 |
CMOS |
GULL WING |
24 V |
FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH |
QFP48,.35SQ,20 |
.5 mm |
125 Cel |
-40 Cel |
QUAD |
S-PQFP-G48 |
60 V |
1.2 mm |
7 mm |
10 V |
7 mm |
Motion control ICs are electronic components designed to control and regulate the movement of mechanical systems. They are used in a wide range of applications, including robotics, manufacturing equipment, and aerospace systems.
Motion control ICs use various technologies to control motion, including microcontrollers, motor drivers, and sensors. They can be used to control the speed, position, and direction of motors, actuators, and other mechanical systems.
One of the main applications of motion control ICs is in robotics, where they are used to control the movement of robot arms, legs, and other components. They can also be used in manufacturing equipment to control the movement of conveyor belts, assembly lines, and other machinery.
Motion control ICs can provide high levels of precision and accuracy in controlling motion. They are often designed to operate in harsh environments and can withstand high temperatures, vibration, and shock.