16 Multiplexers & Switches 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Screening Level	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
ADG409BR-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	2 mA	1	4	CMOS			GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1		1.75 mm	.02 A	3.9 mm	Not Qualified		75 dB		CAN ALSO OPERATE WITH 12V SUPPLY			e0	BREAK-BEFORE-MAKE		240	150 ns	100 ohm	150 ns	15 ohm	9.9 mm
ADG409BR-REEL7	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	2 mA	1	4	CMOS			GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1		1.75 mm	.02 A	3.9 mm	Not Qualified		75 dB		CAN ALSO OPERATE WITH 12V SUPPLY			e0	BREAK-BEFORE-MAKE		240	150 ns	100 ohm	150 ns	15 ohm	9.9 mm
ADG658YRU	Analog Devices	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	8	CMOS			GULL WING	-6 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	COMMON OUTPUT	1	6 V	1.2 mm	.02 A	4.4 mm	Not Qualified	NC	90 dB	2 V	ALSO OPERATE WITH 2 V TO 12 V		-2 V	e0	BREAK-BEFORE-MAKE		240	490 ns	400 ohm	110 ns	2 ohm	5 mm
ADG774ABRQZ-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	4	2	CMOS			GULL WING			3 V	3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	3.3 V	1.7526 mm		3.9116 mm	Not Qualified		65 dB	2.7 V	ALSO OPERATES WITH 5V NOMINAL SUPPLY			e3	BREAK-BEFORE-MAKE		260	14 ns	6 ohm	8 ns	.15 ohm	4.9022 mm
ADG811YRU	Analog Devices	SPST	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS			GULL WING			2.5 V	1.8/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.2 mm		4.4 mm	Not Qualified	NC	67 dB	1.65 V				e0	BREAK-BEFORE-MAKE	30	240	30 ns	.72 ohm	8 ns	.04 ohm	5 mm
DG212BDJ	Vishay Intertechnology	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS			THROUGH-HOLE	-22 V	-15 V	15 V	5,12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T16	SEPARATE OUTPUT		22 V	5.08 mm		7.62 mm	Not Qualified	NO	90 dB	4.5 V			-4.5 V	e0	BREAK-BEFORE-MAKE			300 ns	85 ohm	200 ns	2 ohm	20.13 mm
DG441DYZ	Renesas Electronics	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS			GULL WING	-20 V	-15 V	15 V		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		2	20 V	1.75 mm		3.9 mm	Not Qualified		60 dB	5 V	IT CAN ALSO OPERATE WITH 5V TO 34V SINGLE SUPPLY		-5 V	e3		30	260	250 ns	85 ohm	120 ns		9.9 mm
HEF4052BT,652	NXP Semiconductors	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.6 mA	1	4	CMOS			GULL WING		0 V	15 V	5/15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16		1	15 V	1.75 mm		3.9 mm	Not Qualified		50 dB	3 V				e4	BREAK-BEFORE-MAKE	30	260	85 ns	175 ohm	180 ns	5 ohm	9.9 mm
ISL43141IVZ	Renesas Electronics	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS			GULL WING	-6 V	-5 V	5 V	3/12/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	6 V	1.2 mm		4.4 mm	Not Qualified	NO		2 V			-2 V	e3		30	260	80 ns	65 ohm	30 ns	2 ohm	5 mm
LTC1380IGN#TRPBF	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS			GULL WING		-5 V	5 V		SMALL OUTLINE, SHRINK PITCH			.635 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.75 mm		3.9 mm	Not Qualified		65 dB					e3		30	260	1500 ns	70 ohm	1200 ns	14 ohm	4.9 mm
MAX383CSE	Maxim Integrated	SPDT	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS			GULL WING	-18 V	-5 V	5 V	+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	18 V	1.75 mm		3.9 mm	Not Qualified		72 dB	3 V			-3 V	e0	BREAK-BEFORE-MAKE	20	240	175 ns	35 ohm	100 ns	.5 ohm	9.9 mm
MAX383CSE+	Analog Devices	SPDT	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	2	1	CMOS			GULL WING		-5 V	5 V	+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1		1.75 mm		3.9 mm	Not Qualified		72 dB					e3	BREAK-BEFORE-MAKE	30	260	175 ns	35 ohm	100 ns	.5 ohm	9.9 mm
MAX4052AESE-T	Maxim Integrated	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	8	CMOS			GULL WING	-8 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	8 V	1.75 mm		3.9 mm	Not Qualified		90 dB	2.7 V	IT CAN ALSO WORK ON 2V TO 16V SINGLE SUPPLY; CONFIGURABLE AS 8 CHANNEL SINGLE-ENDED MUX		-2.7 V	e0	BREAK-BEFORE-MAKE		245	175 ns	100 ohm	150 ns	6 ohm	9.9 mm
MAX4052AESE+T	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	4	CMOS			GULL WING	-8 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	8 V	1.75 mm		3.9 mm	Not Qualified		90 dB	2.7 V			-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	100 ohm	150 ns	6 ohm	9.9 mm
MAX4581AUE-T	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	8	CMOS			GULL WING	-6 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	6 V	1.1 mm	.02 A	4.4 mm	Not Qualified		74 dB	2 V	ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY		-2 V	e0	BREAK-BEFORE-MAKE			200 ns	80 ohm	100 ns	1 ohm	5 mm
MAX4581AUE+T	Analog Devices	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	8	CMOS			GULL WING	-6 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	6 V	1.1 mm	.02 A	4.4 mm	Not Qualified		73 dB	2 V			-2 V	e3	BREAK-BEFORE-MAKE	30	260	200 ns	80 ohm	100 ns	1 ohm	5 mm
MC74VHC4053DR2G	Onsemi	SINGLE-ENDED MULTIPLEXER	MILITARY	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.08 mA	1	6	CMOS			GULL WING	-6 V	-4.5 V	4.5 V	2/6	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	125 Cel	-55 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	12 V	1.75 mm	.025 A	3.9 mm	Not Qualified		40 dB	2 V			0 V	e3	BREAK-BEFORE-MAKE	30	260	83 ns	170 ohm	76 ns	18 ohm	9.9 mm
PTMUX1112PWR	Texas Instruments	SPST	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS			GULL WING			5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	125 Cel	-40 Cel		DUAL	R-PDSO-G16	SEPARATE OUTPUT		5.5 V	1.2 mm		4.4 mm		NC	40 dB	1.08 V					BREAK-BEFORE-MAKE			5 ns	4.9 ohm	5 ns	.13 ohm	5 mm
SN74HC4851DRE4	Texas Instruments	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	1	1	CMOS			GULL WING			3 V	2/6	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	6 V	1.75 mm	.05 A	3.9 mm	Not Qualified	NC		2 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	90 ns	700 ohm	90 ns	2 ohm	9.9 mm	6 V
TMUX7211RUMR	Texas Instruments	SPST	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	.09 mA	4	4	CMOS		48 kHz	NO LEAD	-22 V	-15 V	15 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25		.65 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N16	SEPARATE OUTPUT	1	22 V	.8 mm		4 mm		NO	70 dB	4.5 V		-4.5 V	-4.5 V	e4	BREAK-BEFORE-MAKE		260	225 ns	3.6 ohm	240 ns	.1 ohm	4 mm	22 V
74VHC4053M	National Semiconductor	SPDT	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	2	CMOS			GULL WING	-6 V	-4.5 V	4.5 V	2/6,GND/-6	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G16			6 V	1.75 mm	.025 A	3.9 mm	Not Qualified		44 dB	2 V			0 V	e0	BREAK-BEFORE-MAKE			46 ns	120 ohm	37 ns	5 ohm	9.9 mm
ADG1209YRZ-REEL7	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.33 mA	1	4	CMOS			GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	16.5 V	1.75 mm	.03 A	4.9 mm	Not Qualified		85 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	115 ns	200 ohm	140 ns	3.5 ohm	9.9 mm
ADG409BN	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	2 mA	1	4	CMOS			THROUGH-HOLE		-15 V	15 V	12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T16				5.33 mm	.02 A	7.62 mm	Not Qualified		75 dB		CAN ALSO OPERATE WITH 12V SUPPLY			e0	BREAK-BEFORE-MAKE			150 ns	100 ohm	150 ns	15 ohm	20.07 mm
ADG451BNZ	Analog Devices	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS			THROUGH-HOLE	-20 V	-5 V	5 V	5,12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16	SEPARATE OUTPUT		20 V	5.33 mm		7.62 mm	Not Qualified	NC	65 dB	4.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY		-4.5 V	e3	BREAK-BEFORE-MAKE			220 ns	12 ohm	140 ns	.3 ohm	20.07 mm
ADG888BCBZ-REEL	Analog Devices	DPDT	INDUSTRIAL	16	VFBGA	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS			BALL			2.7 V	3/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA16,4X4,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-PBGA-B16	SEPARATE OUTPUT	1	5.5 V	.65 mm		2 mm	Not Qualified		67 dB	1.8 V				e1	BREAK-BEFORE-MAKE		260	50 ns	.7 ohm	22 ns	.045 ohm	2 mm
ADG888BCBZ-REEL7	Analog Devices	DPDT	INDUSTRIAL	16	VFBGA	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS			BALL			2.7 V	3/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA16,4X4,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-PBGA-B16	SEPARATE OUTPUT	1	5.5 V	.65 mm		2 mm	Not Qualified		67 dB	1.8 V				e1	BREAK-BEFORE-MAKE	30	260	50 ns	.7 ohm	22 ns	.045 ohm	2 mm
ADG888YCPZ-REEL	Analog Devices	DPDT	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED		2	1	CMOS			NO LEAD			2.7 V	3/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	SEPARATE OUTPUT	3	5.5 V	1 mm		4 mm	Not Qualified		67 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	50 ns	.7 ohm	22 ns	.045 ohm	4 mm
DG212CJ-2	Maxim Integrated	SPST	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS			THROUGH-HOLE	-18 V	-15 V	15 V	5,+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T16	SEPARATE OUTPUT	1	18 V	4.572 mm		7.62 mm	Not Qualified	NO	70 dB	4.5 V			-4.5 V	e0	BREAK-BEFORE-MAKE			1000 ns	175 ohm	500 ns		19.175 mm
DG509A-CJ	Thomson Consumer Electronics	DIFFERENTIAL MULTIPLEXER	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	3.9 mA	1	4	CMOS			THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel		DUAL	R-PDIP-T16					.02 A		Not Qualified								BREAK-BEFORE-MAKE				550 ohm
DG509ACJ	Vishay Intertechnology	DIFFERENTIAL MULTIPLEXER	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	3.9 mA	1	4	CMOS			THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T16					.02 A		Not Qualified		68 dB					e0	BREAK-BEFORE-MAKE				450 ohm		6 ohm
DG509ACJ+	Analog Devices	DIFFERENTIAL MULTIPLEXER	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.2 mA	1	4	CMOS			THROUGH-HOLE	-18 V	-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T16		1	18 V	4.572 mm	.02 A	7.62 mm	Not Qualified		68 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	1500 ns	450 ohm	1000 ns	27 ohm	19.175 mm
FSA801UMX	Onsemi	AUDIO/VIDEO SWITCH	INDUSTRIAL	16	VQCCN	RECTANGULAR	YES	UNSPECIFIED	.035 mA	1	3				NO LEAD				2.7/4.4	CHIP CARRIER, VERY THIN PROFILE	LCC16,.07X.1,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N16		1		.55 mm		1.8 mm	Not Qualified							e4		30	260		9 ohm			2.6 mm
HEF4052BTT,112	NXP Semiconductors		AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.6 mA	1	4				GULL WING			5 V	5/15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel		DUAL	R-PDSO-G16		1	15 V	1.1 mm		4.4 mm	Not Qualified		50 dB	3 V					BREAK-BEFORE-MAKE	30	260	260 ns	2500 ohm	190 ns	25 ohm	5 mm
HEF4052BTT-Q100,11	NXP Semiconductors	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.6 mA	1	4	CMOS	AEC-Q100		GULL WING				5/15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.635 mm	125 Cel	-40 Cel		DUAL	R-PDSO-G16					.01 A		Not Qualified								BREAK-BEFORE-MAKE				2500 ohm
MAX354EWE-T	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.5 mA	1	8	CMOS			GULL WING	-18 V	-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	18 V	2.65 mm	.03 A	7.5 mm	Not Qualified		100 dB	4.5 V			-4.5 V	e0	BREAK-BEFORE-MAKE			400 ns	350 ohm	300 ns	7 ohm	10.3 mm
MAX354EWE+T	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.5 mA	1	8	CMOS			GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1		2.65 mm	.03 A	7.5 mm	Not Qualified		100 dB					e3	BREAK-BEFORE-MAKE	30	260	250 ns	350 ohm	250 ns	7 ohm	10.3 mm
MAX354EWE/GG8	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS			GULL WING	-18 V	-15 V	15 V		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G16			18 V	2.65 mm		7.5 mm			100 dB	4.5 V			-4.5 V			NOT SPECIFIED	NOT SPECIFIED	400 ns	350 ohm	300 ns	7 ohm	10.3 mm
MAX4617CUE-T	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	8	CMOS			GULL WING			3.3 V	2.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	3.6 V	1.1 mm	.075 A	4.4 mm	Not Qualified			3 V				e0	BREAK-BEFORE-MAKE		245	20 ns	20 ohm	15 ns		5 mm
MAX4617CUE+T	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	8	CMOS			GULL WING			3.3 V	2.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	3.6 V	1.1 mm	.75 A	4.4 mm	Not Qualified			3 V				e3	BREAK-BEFORE-MAKE	30	260	20 ns	20 ohm	15 ns		5 mm
MAX4740ETE+T	Analog Devices	SPDT	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	BICMOS			NO LEAD			3.3 V	3/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N16	SEPARATE OUTPUT	1	5.5 V	1 mm		3 mm	Not Qualified		64 dB	1.6 V				e3		30	260	70 ns	.9 ohm	55 ns	.06 ohm	3 mm
MC74HC4053ANG	Onsemi	SINGLE-ENDED MULTIPLEXER	MILITARY	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.08 mA	3	2	CMOS			THROUGH-HOLE	-6 V	-4.5 V	4.5 V	2/6,GND/-6	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	Tin (Sn)	DUAL	R-PDIP-T16			6 V	4.44 mm	.025 A	7.62 mm	Not Qualified		50 dB	2 V			0 V	e3	BREAK-BEFORE-MAKE	40	260	245 ns	80 ohm	160 ns	12 ohm	19.175 mm
MM74HC4053MX	Fairchild Semiconductor	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	1	CMOS			GULL WING	-6 V	-4.5 V	4.5 V	2/6,GND/-6	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	6 V	1.75 mm	.025 A	3.9 mm	Not Qualified		42 dB	2 V			0 V	e3	BREAK-BEFORE-MAKE			355 ns	200 ohm	290 ns	25 ohm	9.9 mm
TS3A5017RGYR	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	2	2			165 kHz	NO LEAD			2.5 V	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16/20,.14X.16,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N16	COMMON OUTPUT	2	3.6 V	1 mm	.1 A	3.5 mm	Not Qualified	NC	48 dB	2.3 V				e4	BREAK-BEFORE-MAKE	30	260	10 ns	24 ohm	6 ns	1 ohm	4 mm
TS3L110DGVR	Texas Instruments	SPDT	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	4	4			500 kHz	GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.2 mm	.128 A	3.6 mm	Not Qualified	NO	28 dB	3 V				e4	BREAK-BEFORE-MAKE	30	260	7 ns	8 ohm	5 ns	.9 ohm	4.4 mm
TS3L110DR	Texas Instruments	SPDT	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	4	4			500 kHz	GULL WING			3.3 V	3.3	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.75 mm	.128 A	3.9 mm	Not Qualified	NO	28 dB	3 V				e4	BREAK-BEFORE-MAKE	30	260	7 ns	8 ohm	5 ns	.9 ohm	9.9 mm
ADG774ABRQ-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	4	2	CMOS			GULL WING			3 V	3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	3.3 V	1.7526 mm		3.9116 mm	Not Qualified		65 dB	2.7 V	ALSO OPERATES WITH 5V NOMINAL SUPPLY			e0	BREAK-BEFORE-MAKE		240	14 ns	6 ohm	8 ns	.15 ohm	4.9022 mm
ADG774ABRQZ-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	4	2	CMOS			GULL WING			3 V	3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	3.3 V	1.7526 mm		3.9116 mm	Not Qualified		65 dB	2.7 V	ALSO OPERATES WITH 5V NOMINAL SUPPLY			e3	BREAK-BEFORE-MAKE		260	14 ns	6 ohm	8 ns	.15 ohm	4.9022 mm
DG451EY-T1-E3	Vishay Intertechnology	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS			GULL WING	-16.5 V	-5 V	5 V	+-5/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.75 mm		3.9 mm	Not Qualified	NC		2.4 V	ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY			e3	BREAK-BEFORE-MAKE			256 ns	11 ohm	113 ns	.13 ohm	9.9 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.