8 Multiplexers & Switches 1,790

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	No. of Functions	No. of Channels	Technology	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length
ISL5122IHZ-T	Renesas Electronics	SPST	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	2	1	CMOS	GULL WING			3.3 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G8			12 V	1.45 mm	1.6 mm			76 dB	2.7 V		e3		30	260	200 ns	50 ohm	120 ns	.8 ohm	2.9 mm
ISL84517IB	Renesas Electronics	SPST	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING	-6 V	-5 V	5 V	+-5	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8		1	6 V	1.75 mm	3.9 mm	Not Qualified	NC	86 dB	1.5 V	-1.5 V	e0	BREAK-BEFORE-MAKE			100 ns	20 ohm	75 ns	20 ohm	4.9 mm
ISL54228IRUZ-T7A	Renesas Electronics	DPDT	INDUSTRIAL	8	VQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	1	2	CMOS	NO LEAD			3.3 V		CHIP CARRIER, VERY THIN PROFILE			.4 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	R-PQCC-N8			5.25 V	.5 mm	1.2 mm			23 dB	2.7 V		e3					17 ohm		.2 ohm	1.4 mm
ISL43L122IU-T	Renesas Electronics	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY	2	2	CMOS	GULL WING			1.8 V	1.8/3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	3.6 V	1.1 mm	3 mm	Not Qualified	NO/NC	62 dB	1.65 V		e0				40 ns	.35 ohm	35 ns	.005 ohm	3 mm
ISL5122CBZ	Renesas Electronics	SPST	COMMERCIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	2	1	CMOS	GULL WING			3.3 V		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDSO-G8			12 V	1.75 mm	3.9 mm			76 dB	2.7 V		e3		30	260	200 ns	50 ohm	120 ns	.8 ohm	4.9 mm
ISL43L712IR	Renesas Electronics	SPDT	INDUSTRIAL	8	HVSON	SQUARE	YES	PLASTIC/EPOXY	2	1	CMOS	NO LEAD			1.8 V	1.8/3	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-N8	SEPARATE OUTPUT	1	3.6 V	.8 mm	3 mm	Not Qualified	NO/NC	62 dB	1.65 V		e0				40 ns	.35 ohm	35 ns	.005 ohm	3 mm
ISL84514IBZ	Renesas Electronics	SPST	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3.3 V		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G8		1	12 V	1.75 mm	3.9 mm				2.4 V		e3				240 ns	50 ohm	150 ns		4.9 mm
ISL43111IBZ-T	Renesas Electronics	SPST	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3.3 V		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G8		1	12 V	1.75 mm	3.9 mm				2.4 V		e3				150 ns	30 ohm	85 ns		4.9 mm
ISL5122CBZ-T	Renesas Electronics	SPST	COMMERCIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	2	1	CMOS	GULL WING			3.3 V		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDSO-G8			12 V	1.75 mm	3.9 mm			76 dB	2.7 V		e3		30	260	200 ns	50 ohm	120 ns	.8 ohm	4.9 mm
ISL43112IBZ-T	Renesas Electronics	SPST	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING	-6 V	-3.3 V	3.3 V	+-3.3/+-5	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G8		1	6 V	1.75 mm	3.9 mm	Not Qualified	NO		1.5 V	-1.5 V	e3	BREAK-BEFORE-MAKE	30	260	100 ns	30 ohm	65 ns		4.9 mm
ISL54228IRTZ-T	Renesas Electronics	DPDT	INDUSTRIAL	8	HVSON	SQUARE	YES	PLASTIC/EPOXY	1	2	CMOS	NO LEAD			3.3 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-N8			5.25 V	.8 mm	2 mm			23 dB	2.7 V		e3					17 ohm		.2 ohm	2 mm
ISL43L120IR	Renesas Electronics	SPDT	INDUSTRIAL	8	VSON	SQUARE	YES	PLASTIC/EPOXY	2	2	CMOS	NO LEAD			1.8 V	1.8/3	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.12,25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-N8	SEPARATE OUTPUT	1	3.6 V	.8 mm	3 mm	Not Qualified	NO	62 dB	1.65 V		e0				40 ns	.35 ohm	35 ns	.005 ohm	3 mm
ISL43L122IR-T	Renesas Electronics	SPDT	INDUSTRIAL	8	VSON	SQUARE	YES	PLASTIC/EPOXY	2	2	CMOS	NO LEAD			1.8 V	1.8/3	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.12,25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-N8	SEPARATE OUTPUT	1	3.6 V	.8 mm	3 mm	Not Qualified	NO/NC	62 dB	1.65 V		e0				40 ns	.35 ohm	35 ns	.005 ohm	3 mm
KA2186	Samsung	AUDIO/VIDEO SWITCH	COMMERCIAL	8	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	1	1	BIPOLAR	THROUGH-HOLE			9 V	9	IN-LINE	DIP8,.3	Multiplexer or Switches	2.54 mm	70 Cel	-10 Cel	TIN LEAD	DUAL	R-PDIP-T8				5.08 mm	7.62 mm	Not Qualified					e0								9.2 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.