SPDT Multiplexers & Switches 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Screening Level	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
TS5A3160DCKR	Texas Instruments	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0005 mA	1	1			105 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.1 mm		1.25 mm	Not Qualified		64 dB	1.65 V		0 V		e4	MAKE-BEFORE-BREAK	30	260	27 ns	3.5 ohm	30 ns	.15 ohm	2 mm	5.5 V
AD7512DITQ/883B	Analog Devices	SPDT	MILITARY	14	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		2	1	CMOS	MIL-STD-883 Class B		THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-GDIP-T14	SEPARATE OUTPUT			6.3 mm		7.62 mm	Not Qualified	NO/NC			OVERVOLTAGE PROTECTION			e0				1000 ns	175 ohm	1000 ns	.75 ohm	17.27 mm
MAX4644EUT-T	Maxim Integrated	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS			GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm		1.625 mm	Not Qualified	NO/NC	55 dB	1.8 V	CAN ALSO OPERATE WITH 5V SUPPLY			e0	BREAK-BEFORE-MAKE	40	260	22 ns	8 ohm	8 ns	.1 ohm	2.9 mm
MAX4644EUT+T	Analog Devices	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS			GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G6		1	3.3 V	1.45 mm		1.625 mm	Not Qualified	NO/NC	55 dB	2.7 V	CAN ALSO OPERATE WITH 5V SUPPLY			e3	BREAK-BEFORE-MAKE	30	260	20 ns	8 ohm	7.5 ns	.1 ohm	2.9 mm
NLAS5123MNR2G	Onsemi	SPDT	INDUSTRIAL	6	VSON	RECTANGULAR	YES	PLASTIC/EPOXY		1	1				NO LEAD			2.7 V	1.8/5	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-N6		1	5.5 V	.8 mm		1 mm	Not Qualified		62 dB	1.65 V				e4	BREAK-BEFORE-MAKE	40	260	35 ns	1.7 ohm	25 ns	.15 ohm	1.2 mm
ADG436BRZ	Analog Devices	SPDT	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS			GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.75 mm		3.9 mm	Not Qualified		72 dB					e3	BREAK-BEFORE-MAKE	30	260	125 ns	25 ohm	120 ns	1 ohm	9.9 mm
ADG5433BRUZ	Analog Devices	SPDT	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	1	CMOS			GULL WING	-22 V	-15 V	15 V	+-9/+-22/9/40	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	22 V	1.2 mm		4.4 mm	Not Qualified		60 dB	9 V			-9 V	e3	BREAK-BEFORE-MAKE	30	260	274 ns	15 ohm	140 ns	.3 ohm	5 mm
MAX4544EUT+TC6W	Maxim Integrated	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	CMOS			GULL WING			5 V	5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	12 V	1.45 mm		1.625 mm	Not Qualified		76 dB	2.7 V				e3	BREAK-BEFORE-MAKE	30	260	240 ns	60 ohm	150 ns	2 ohm	2.9 mm
TS5A3159ADCKRG4	Texas Instruments	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0001 mA	1	1			100 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	1.95 V	1.1 mm		1.25 mm	Not Qualified		64 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	75 ns	2.5 ohm	50 ns	.15 ohm	2 mm	5.5 V
TS5A3160DBVR	Texas Instruments	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0005 mA	1	1			105 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified		64 dB	1.65 V		0 V		e4	MAKE-BEFORE-BREAK	30	260	27 ns	3.5 ohm	30 ns	.15 ohm	2.9 mm	5.5 V
ADG436BRZ-REEL	Analog Devices	SPDT	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS			GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.75 mm		3.9 mm	Not Qualified		72 dB					e3	BREAK-BEFORE-MAKE	30	260	125 ns	25 ohm	120 ns	1 ohm	9.9 mm
ADG636YRUZ	Analog Devices	SPDT	AUTOMOTIVE	14	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS			GULL WING	-5.5 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G14	SEPARATE OUTPUT	1	5.5 V	1.1 mm		4.4 mm	Not Qualified	NC	65 dB	2.7 V			-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	135 ns	115 ohm	80 ns	2 ohm	5 mm
ADG719BRT-REEL7	Analog Devices	SPDT	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS			GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm		1.6 mm	Not Qualified		67 dB	1.8 V				e0	BREAK-BEFORE-MAKE		240	15 ns	12 ohm	8 ns	.1 ohm	2.9 mm
DG419CY	Maxim Integrated	SPDT	COMMERCIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS			GULL WING	-20 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8			20 V	1.75 mm		3.9 mm	Not Qualified		68 dB	4.5 V			-4.5 V	e0	BREAK-BEFORE-MAKE			175 ns	35 ohm	175 ns	3 ohm	4.9 mm
DG419CY+	Analog Devices	SPDT	COMMERCIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS			GULL WING	-20 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8		1	20 V	1.75 mm		3.9 mm	Not Qualified		68 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	35 ohm	175 ns	3 ohm	4.9 mm
FSA2267L10X	Onsemi	SPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		2	1	CMOS			NO LEAD			2.3 V	1.8/3.3	CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.08,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N10	SEPARATE OUTPUT	1	3.6 V	.55 mm		1.6 mm	Not Qualified		80 dB	1.65 V				e4	BREAK-BEFORE-MAKE	30	260	37 ns	.75 ohm	18 ns	.04 ohm	2.1 mm
TMUX7219DGKR	Texas Instruments	SPDT	AUTOMOTIVE	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.04 mA	1	1	CMOS		40 kHz	GULL WING	-22 V	-15 V	15 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		.65 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	22 V	1.1 mm	.43 A	3 mm			75 dB	4.5 V		-4.5 V	-4.5 V	e4	BREAK-BEFORE-MAKE	30	260	200 ns	4.5 ohm	210 ns	.05 ohm	3 mm	22 V
ADG1634BRUZ-REEL7	Analog Devices	SPDT	AUTOMOTIVE	20	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS			GULL WING	-8 V	-5 V	5 V	+-3.3/+-8/3.3/16	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G20	SEPARATE OUTPUT	1	8 V	1.2 mm		4.4 mm	Not Qualified		64 dB	3.3 V			-3.3 V	e3	BREAK-BEFORE-MAKE	30	260	98 ns	5 ohm	259 ns	.12 ohm	6.5 mm
ADG419BR	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS			GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SOP8,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	16.5 V	1.09 mm		3 mm	Not Qualified		80 dB	13.5 V	ALSO OPERATES WITH 12V NOMINAL SINGLE SUPPLY		-13.5 V	e0	BREAK-BEFORE-MAKE		240	160 ns	35 ohm	160 ns		3 mm
TS3L110RGYR	Texas Instruments	SPDT	INDUSTRIAL	16	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	4	4			500 kHz	NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16/20,.14X.16,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N16	SEPARATE OUTPUT	2	3.6 V	1 mm	.128 A	3.5 mm	Not Qualified	NO	28 dB	3 V				e4	BREAK-BEFORE-MAKE	30	260	7 ns	8 ohm	5 ns	.9 ohm	4 mm
ADG619BRTZ-500RL7	Analog Devices	SPDT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	1	CMOS			GULL WING	-5.5 V	-5 V	5 V	+-3/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	COMMON OUTPUT	1	5.5 V	1.45 mm	.05 A	1.6 mm	Not Qualified	NO	67 dB	2.7 V	ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e4	BREAK-BEFORE-MAKE		260	120 ns	6.5 ohm	75 ns	.7 ohm	2.9 mm
ADGS1412BCPZ-RL7	Analog Devices	SPDT	AUTOMOTIVE	24	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS			NO LEAD	-16.5 V	-5 V	5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N24		3	16.5 V	1 mm		4 mm				4.5 V			-4.5 V	e3		30	260		4 ohm		.13 ohm	4 mm
MAX4659EUA	Maxim Integrated	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS			GULL WING	-20 V	-15 V	15 V	9/40/+-4.5/+-20	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	20 V	1.1 mm		3 mm	Not Qualified		70 dB	4.5 V			-4.5 V	e0	BREAK-BEFORE-MAKE		245	150 ns	25 ohm	150 ns	.4 ohm	3 mm
MAX4659EUA+	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS			GULL WING	-20 V	-15 V	15 V	9/40/+-4.5/+-20	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G8		1	20 V	1.1 mm		3 mm	Not Qualified		70 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	25 ohm	150 ns	.4 ohm	3 mm
TS5A3159DCKT	Texas Instruments	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0001 mA	1	1			100 kHz	GULL WING			1.8 V	2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.1 mm		1.25 mm	Not Qualified		63 dB	1.65 V	2-CHANNEL MUX/DEMUX	0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	95 ns	3.2 ohm	70 ns	.7 ohm	2 mm	5.5 V
ADG936BRUZ-R	Analog Devices	SPDT	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS			GULL WING			2.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G20		1	2.75 V	1.2 mm		4.4 mm	Not Qualified		36 dB	1.65 V				e3			260	14 ns		13 ns		6.5 mm
ISL84467IRTZ-T	Renesas Electronics	SPDT	INDUSTRIAL	16	VQCCN	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS			NO LEAD			1.8 V	1.8/4.3	CHIP CARRIER, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-N16	SEPARATE OUTPUT	2	4.5 V	.8 mm		3 mm	Not Qualified		65 dB	1.65 V				e3	BREAK-BEFORE-MAKE	30	260		.9 ohm			3 mm
NLAS4717MR2G	Onsemi	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS			GULL WING			3 V	2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	75 dB	1.8 V				e3	BREAK-BEFORE-MAKE	40	260	30 ns	4.5 ohm	40 ns	.1 ohm	3 mm
NLAST4599DFT2G	Onsemi	SPDT	MILITARY	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS			GULL WING			3 V	2.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	125 Cel	-55 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm		1.25 mm	Not Qualified		93 dB	2 V				e3	BREAK-BEFORE-MAKE	40	260	25 ns	55 ohm	15 ns	3 ohm	2 mm
TS3A5018DBQRE4	Texas Instruments	SPDT	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1				GULL WING			2.5 V	2.5/3.3	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	2	3.6 V	1.75 mm		3.9 mm	Not Qualified	NC	48 dB	2.3 V				e4	BREAK-BEFORE-MAKE	30	260	10.5 ns	20 ohm	9 ns	.4 ohm	4.9 mm
TS3A5018DBQRG4	Texas Instruments	SPDT	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.002 mA	4	4			300 kHz	GULL WING			2.5 V	2.5/3.3	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	2	3.6 V	1.75 mm	.1 A	3.9 mm	Not Qualified	NO/NC	48 dB	2.3 V				e4	BREAK-BEFORE-MAKE	30	260	10.5 ns	22 ohm	9 ns	.4 ohm	4.9 mm
TS3A5018PWRE4	Texas Instruments	SPDT	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.002 mA	4	4			300 kHz	GULL WING			2.5 V	2.5/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.2 mm	.1 A	4.4 mm	Not Qualified	NC	48 dB	2.3 V				e4	BREAK-BEFORE-MAKE	30	260	10.5 ns	22 ohm	9 ns	.4 ohm	5 mm
TS3L501ERUAR	Texas Instruments	SPDT	INDUSTRIAL	42	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	.6 mA	8	11			600 kHz	NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC42,.14X.35,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N42	SEPARATE OUTPUT	2	3.6 V	.8 mm	.128 A	3.5 mm	Not Qualified		37 dB	3 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	.5 ns	8 ohm	.9 ns	1.5 ohm	9 mm	5.5 V
FSA5157L6X	Onsemi	SPDT	INDUSTRIAL	6	HVSON	RECTANGULAR	YES	UNSPECIFIED		1	1	CMOS			NO LEAD			2.3 V	1.8/4	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC6,.04,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-XDSO-N6	SEPARATE OUTPUT	1	4.3 V	.55 mm		1 mm	Not Qualified		75 dB	1.65 V				e4	BREAK-BEFORE-MAKE	30	260	65 ns	.8 ohm	40 ns	.12 ohm	1.45 mm
SN3257QPWRQ1	Texas Instruments	SPDT	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.068 mA	4	4	CMOS		1200 kHz	GULL WING			3.3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1	3.6 V	1.2 mm		4.4 mm			75 dB	1.5 V				e4		30	260	60000 ns	5 ohm	2700 ns	.07 ohm	5 mm
TS3A5018PWRG4	Texas Instruments	SPDT	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1				GULL WING			2.5 V	2.5/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.2 mm		4.4 mm	Not Qualified	NO/NC	48 dB	2.3 V				e4	BREAK-BEFORE-MAKE	30	260	10.5 ns	20 ohm	9 ns	.4 ohm	5 mm
TS5A3159ADCKT	Texas Instruments	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0001 mA	1	1			100 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	1.95 V	1.1 mm		1.25 mm	Not Qualified		64 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	75 ns	2.5 ohm	50 ns	.15 ohm	2 mm	5.5 V
74LVC1G3157DCKRG4	Texas Instruments	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.035 mA	1	1	CMOS		340 kHz	GULL WING			2.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexers or Switches	.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G6	COMMON OUTPUT	1	5.5 V	1.1 mm		1.25 mm	Not Qualified	NC	57 dB	1.65 V				e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	14 ns	30 ohm	7.5 ns	.1 ohm	2 mm
PSN3257QPWRQ1	Texas Instruments	SPDT	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	AEC-Q100		GULL WING			3.3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	125 Cel	-40 Cel		DUAL	R-PDSO-G16			3.6 V	1.2 mm		4.4 mm			75 dB	1.5 V								60000 ns	5 ohm	2700 ns	.07 ohm	5 mm
MAX4053ACEE	Maxim Integrated	SPDT	COMMERCIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	1	CMOS			GULL WING	-8 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	8 V	1.75 mm		3.9 mm	Not Qualified		90 dB	2.7 V	IT CAN ALSO WORK ON 2V TO 16V SINGLE SUPPLY		-2.7 V	e0	BREAK-BEFORE-MAKE	20	240	175 ns	100 ohm	150 ns	6 ohm	4.9 mm
MAX4053ACEE+	Analog Devices	SPDT	COMMERCIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	1	CMOS			GULL WING	-8 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	8 V	1.75 mm		3.9 mm	Not Qualified		90 dB	2.7 V			-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	100 ohm	150 ns	6 ohm	4.9 mm
MAX4053ACSE	Maxim Integrated	SPDT	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	1	CMOS			GULL WING	-8 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	8 V	1.75 mm		3.9 mm	Not Qualified		90 dB	2.7 V	IT CAN ALSO WORK ON 2V TO 16V SINGLE SUPPLY		-2.7 V	e0	BREAK-BEFORE-MAKE			175 ns	100 ohm	150 ns	6 ohm	9.9 mm
MAX4053ACSE+	Analog Devices	SPDT	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	1	CMOS			GULL WING	-8 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	8 V	1.75 mm		3.9 mm	Not Qualified		90 dB	2.7 V			-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	100 ohm	150 ns	6 ohm	9.9 mm
ADG5434BCPZ-REEL7	Analog Devices	SPDT	AUTOMOTIVE	20	QCCN	SQUARE	YES	PLASTIC/EPOXY		4		BICMOS			NO LEAD				+-9/+-22/9/40	CHIP CARRIER	LCC20,.16SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N20	SEPARATE OUTPUT	3					Not Qualified							e3	BREAK-BEFORE-MAKE	30	260	289 ns	42 ohm
MAX383ESE-T	Maxim Integrated	SPDT	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS			GULL WING	-18 V	-5 V	5 V	+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	18 V	1.75 mm		3.9 mm	Not Qualified		72 dB	3 V			-3 V	e0	BREAK-BEFORE-MAKE			175 ns	35 ohm	100 ns	.5 ohm	9.9 mm
MAX383ESE+T	Analog Devices	SPDT	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	2	1	CMOS			GULL WING		-5 V	5 V	+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1		1.75 mm		3.9 mm	Not Qualified		72 dB					e3	BREAK-BEFORE-MAKE	30	260	175 ns	35 ohm	100 ns	.5 ohm	9.9 mm
NLASB3157MTR2G	Onsemi	SPDT	MILITARY	6	VSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	CMOS			GULL WING			2.3 V	1.8/5	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	SOLCC6,.04,16	Multiplexer or Switches	.4 mm	125 Cel	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	.8 mm		1 mm	Not Qualified		57 dB	1.65 V				e4	BREAK-BEFORE-MAKE	30	260	24 ns	15 ohm	13 ns	.5 ohm	1.2 mm
TS3L110PWRG4	Texas Instruments	SPDT	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	4	4			500 kHz	GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.2 mm	.128 A	4.4 mm	Not Qualified	NO	28 dB	3 V				e4	BREAK-BEFORE-MAKE	30	260	7 ns	8 ohm	5 ns	.9 ohm	5 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.