SPST Multiplexers & Switches 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length
DG381AA	Analog Devices	SPST	MILITARY	10		ROUND	NO	METAL		2	1	CMOS		WIRE	-18 V	-15 V	15 V	+-15	CYLINDRICAL	CAN10,.23	Multiplexer or Switches		125 Cel	-55 Cel	TIN LEAD	BOTTOM	O-MBCY-W10	SEPARATE OUTPUT		18 V			Not Qualified	NC	62 dB	5 V		-5 V	e0	BREAK-BEFORE-MAKE			300 ns	50 ohm	250 ns
MXDG445DY	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1			GULL WING	-20 V				SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	20 V	1.75 mm	3.9 mm	Not Qualified			5 V		-5 V	e0					85 ohm			9.9 mm
IH5140M/D/883B	Analog Devices	SPST	MILITARY	14	DIE	RECTANGULAR	YES	UNSPECIFIED		1	1	CMOS		NO LEAD		-15 V	15 V		UNCASED CHIP				125 Cel	-55 Cel	TIN LEAD	UPPER	R-XUUC-N14						Not Qualified		54 dB				e0				150 ns	50 ohm	125 ns	3 ohm
DG381C/D	Analog Devices	SPST	COMMERCIAL	12	DIE	RECTANGULAR	YES	UNSPECIFIED		2	1	CMOS		NO LEAD	-18 V	-15 V	15 V	+-15	UNCASED CHIP	DIE OR CHIP	Multiplexer or Switches		70 Cel	0 Cel	TIN LEAD	UPPER	R-XUUC-N12	SEPARATE OUTPUT		18 V			Not Qualified	NC	62 dB	5 V		-5 V	e0	BREAK-BEFORE-MAKE			300 ns	50 ohm	250 ns
DG200ARK	Analog Devices	SPST	COMMERCIAL EXTENDED	14	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		2	1	CMOS		THROUGH-HOLE	-18 V	-15 V	15 V		IN-LINE			2.54 mm	80 Cel	-25 Cel	TIN LEAD	DUAL	R-GDIP-T14			18 V	5.842 mm	7.62 mm	Not Qualified		75 dB	4.5 V		-4.5 V	e0				1000 ns	70 ohm	500 ns		19.43 mm
MXDG417DY	Analog Devices	SPST	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			GULL WING	-20 V				SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8		1	20 V	1.75 mm	3.9 mm	Not Qualified			5 V		-5 V	e0					35 ohm			4.9 mm
DG381CK	Analog Devices	SPST	COMMERCIAL	14	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		2	1	CMOS		THROUGH-HOLE	-18 V	-15 V	15 V	+-15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-GDIP-T14	SEPARATE OUTPUT		18 V	5.08 mm	7.62 mm	Not Qualified	NC	62 dB	5 V		-5 V	e0	BREAK-BEFORE-MAKE			300 ns	50 ohm	250 ns		19.43 mm
MAX395C/D+	Analog Devices	SPST	COMMERCIAL	24	DIE	RECTANGULAR	YES	UNSPECIFIED	.03 mA	8	1	CMOS		NO LEAD		-5 V	5 V		UNCASED CHIP				70 Cel	0 Cel	TIN LEAD	UPPER	R-XUUC-N24						Not Qualified		90 dB				e0				400 ns	100 ohm	400 ns	5 ohm
MAX381CSE+T	Analog Devices	SPST	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-18 V	-5 V	5 V		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	18 V	1.75 mm	3.9 mm			72 dB	3 V		-3 V	e3		30	260	225 ns	35 ohm	150 ns	.5 ohm	9.9 mm
ADG444ABR	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	16.5 V	1.75 mm	3.9 mm	Not Qualified	NC	60 dB	13.5 V	CAN ALSO OPERATE WITH 12V SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE		240	110 ns	70 ohm	60 ns	1 ohm	9.9 mm
ADG811YCP-REEL7	Analog Devices	SPST	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS		NO LEAD			2.5 V	1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N16			3.6 V	1 mm	3 mm	Not Qualified	NO	67 dB	1.65 V			e0	BREAK-BEFORE-MAKE			27 ns	.72 ohm	6 ns	.04 ohm	3 mm
ADG611YRU-REEL	Analog Devices	SPST	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	NC	65 dB	2.7 V		-2.7 V	e0	BREAK-BEFORE-MAKE		240	65 ns	115 ohm	40 ns	2 ohm	5 mm
ADG1422BCPZ-REEL7	Analog Devices	SPST	AUTOMOTIVE	10	HVSON	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		NO LEAD	-5.5 V	-5 V	5 V	+-5/+-15/12	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-N10		3	5.5 V	.8 mm	3 mm	Not Qualified	NC	60 dB	4.5 V	ALSO OPERATES ON PLUS OR MINUS 15V AND PLUS 12V	-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	520 ns	7 ohm	395 ns	.04 ohm	3 mm
ADG701LBRJZ-REEL7	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G5	SEPARATE OUTPUT	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	NC	55 dB	1.8 V			e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG212AKPZ	Analog Devices	SPST	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS		J BEND		-15 V	15 V	5,+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1		4.57 mm	8.965 mm	Not Qualified	NO	80 dB				e3	BREAK-BEFORE-MAKE		260	600 ns	115 ohm	450 ns		8.965 mm
ADG202AKP-REEL	Analog Devices	SPST	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1		4.57 mm	8.966 mm	Not Qualified	NO	80 dB				e0	BREAK-BEFORE-MAKE		225	300 ns	90 ohm	250 ns	5 ohm	8.966 mm
ADG431TQ/883B	Analog Devices	SPST	MILITARY	16	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		4	1	CMOS	MIL-STD-883 Class B	THROUGH-HOLE		-15 V	15 V	5,12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-GDIP-T16	SEPARATE OUTPUT			5.08 mm	7.62 mm	Not Qualified	NC	68 dB				e0	BREAK-BEFORE-MAKE			175 ns	24 ohm	145 ns	.85 ohm	19.05 mm
ADG432ABR	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT		16.5 V	1.75 mm	3.9 mm	Not Qualified	NO	68 dB	13.5 V	ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE			165 ns	24 ohm	130 ns	.85 ohm	9.9 mm
AD7510DIJQ	Analog Devices	SPST	OTHER	16	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED	.8 mA	4	1	CMOS		THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-25 Cel	TIN LEAD	DUAL	R-GDIP-T16	SEPARATE OUTPUT			5.08 mm	7.62 mm	Not Qualified	NO			OVERVOLTAGE PROTECTION		e0	MAKE-BEFORE-BREAK				100 ohm		1 ohm	19.05 mm
ADG512TQ	Analog Devices	SPST	MILITARY	16	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		4	1	CMOS		THROUGH-HOLE	-5.5 V	-5 V	5 V	3.3/+-5	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-GDIP-T16	SEPARATE OUTPUT		5.5 V	5.08 mm	7.62 mm	Not Qualified	NO	68 dB	4.5 V		-4.5 V	e0	BREAK-BEFORE-MAKE			375 ns	50 ohm	150 ns		19.05 mm
ADG813YRU	Analog Devices	SPST	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING			2.5 V	1.8/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	NO/NC	67 dB	1.65 V			e0	BREAK-BEFORE-MAKE		240	30 ns	.72 ohm	8 ns	.04 ohm	5 mm
ADG412BRU-REEL	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.2 mm	4.4 mm	Not Qualified	NO	68 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE	30	240	175 ns	35 ohm	145 ns		5 mm
ADG1413YRUZ-REEL	Analog Devices	SPST	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	+-5/12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	NO/NC	50 dB	4.5 V	CAN ALSO OPERATES AT 12 V AND +/-15 V SUPPLY	-4.5 V	e3	BREAK-BEFORE-MAKE			155 ns	4 ohm	65 ns	.1 ohm	5 mm
ADG431ABRZ-REEL	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	TIN	DUAL	R-PDSO-G16		1	16.5 V	1.75 mm	3.9 mm	Not Qualified		68 dB	13.5 V		-13.5 V	e3			260	165 ns	24 ohm	130 ns	.85 ohm	9.9 mm
ADG412BRU	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.2 mm	4.4 mm	Not Qualified	NO	68 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE	30	240	175 ns	35 ohm	145 ns		5 mm
ADG431BCHIPS	Analog Devices	SPST	INDUSTRIAL		DIE	UNSPECIFIED	YES	UNSPECIFIED		4	1	CMOS		NO LEAD		-15 V	15 V		UNCASED CHIP				85 Cel	-40 Cel	TIN LEAD	UPPER	X-XUUC-N						Not Qualified		68 dB				e0				165 ns	24 ohm	130 ns	.85 ohm
ADGS5412BCPZ-RL7	Analog Devices	SPST	AUTOMOTIVE	24	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1			NO LEAD	-22 V	-15 V	15 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	-40 Cel		QUAD	S-XQCC-N24		3	22 V	1 mm	4 mm				9 V		-9 V			30	260		11 ohm		.35 ohm	4 mm
ADG5413BFBRUZ	Analog Devices	SPST	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1			GULL WING	-22 V	-15 V	15 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	22 V	1.2 mm	4.4 mm				5 V		-5 V	e3		30	260		11.2 ohm		.05 ohm	5 mm
LTC201ACS#TRPBF	Analog Devices	SPST	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING		-15 V	15 V		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.752 mm	3.899 mm	Not Qualified		75 dB				e3				400 ns	125 ohm	300 ns	3.25 ohm	9.906 mm
AD7510DIKN	Analog Devices	SPST	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS		THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T16	SEPARATE OUTPUT			4.32 mm	7.62 mm	Not Qualified	NO			OVERVOLTAGE PROTECTION		e0	MAKE-BEFORE-BREAK			180 ns	175 ohm	350 ns	.75 ohm	19.055 mm
ADG802BRT-R2	Analog Devices	SPST	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	2/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6			5.5 V	1.45 mm	1.65 mm	Not Qualified	NC	61 dB	1.8 V			e0	BREAK-BEFORE-MAKE			55 ns	.6 ohm	15 ns		2.9 mm
ADG5423BCPZ-RL7	Analog Devices	SPST	AUTOMOTIVE	10	HVSON	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		NO LEAD	-22 V	-15 V	15 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-N10		3	22 V	.85 mm	3 mm				9 V		-9 V	e3		30	260		15 ohm		.1 ohm	3 mm
ADG432ABR-REEL7	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT		16.5 V	1.75 mm	3.9 mm	Not Qualified	NO	68 dB	13.5 V	ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE			165 ns	24 ohm	130 ns	.85 ohm	9.9 mm
ADG1411YRUZ-REEL	Analog Devices	SPST	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	+-5/12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	NC	50 dB	4.5 V	CAN ALSO OPERATES AT 12 V AND +/-15 V SUPPLY	-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	155 ns	4 ohm	65 ns	.1 ohm	5 mm
ADG1212YRU	Analog Devices	SPST	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	16.5 V	1.1 mm	4.4 mm	Not Qualified		75 dB	13.5 V	ALSO OPERATES AT +12 V SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE	30	240		120 ohm		5 ohm	5 mm
ADG211AKR-REEL	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING		-15 V	15 V	5,+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1		1.75 mm	3.9 mm	Not Qualified	NC	80 dB				e0	BREAK-BEFORE-MAKE		240	600 ns	115 ohm	450 ns		9.9 mm
ADG612YRU-REEL7	Analog Devices	SPST	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	NO	65 dB	2.7 V		-2.7 V	e0	BREAK-BEFORE-MAKE	30	240	65 ns	115 ohm	40 ns	2 ohm	5 mm
ADG741BKSZ-REEL	Analog Devices	SPST	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm	1.25 mm	Not Qualified	NO	55 dB	1.8 V	CAN ALSO OPERATE WITH 5 VOLT SUPPLY		e4	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns		2 mm
ADG701LBRJ-REEL7	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5	SEPARATE OUTPUT	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	NC	55 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG783BCPZ	Analog Devices	SPST	INDUSTRIAL	20	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS		NO LEAD			3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N20		3	5.5 V	.9 mm	4 mm	Not Qualified		58 dB	1.8 V	CAN ALSO OPERATE AT 5V NOMINAL		e3			260	20 ns	10 ohm	12 ns	.1 ohm	4 mm
ADG222KP	Analog Devices	SPST	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS		J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1		4.57 mm	8.966 mm	Not Qualified	NO	80 dB				e0	BREAK-BEFORE-MAKE			300 ns	90 ohm	250 ns	5 ohm	8.966 mm
LTC221CS#TRPBF	Analog Devices	SPST	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING		-15 V	15 V		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.752 mm	3.899 mm	Not Qualified		75 dB		CAN ALSO OPERATE FROM SINGLE 5V SUPPLY		e3				400 ns	90 ohm	300 ns		9.906 mm
ADG822BRM-REEL	Analog Devices	SPST	AUTOMOTIVE	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			3.6 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm	3 mm	Not Qualified	NC	52 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	67 ns	1.4 ohm	18 ns	.16 ohm	3 mm
5962-8671603VEX	Analog Devices	SPST	MILITARY	16	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		4	1	CMOS	MIL-PRF-38535 Class V	THROUGH-HOLE		-15 V	15 V		IN-LINE				125 Cel	-55 Cel		DUAL	R-GDIP-T16						Not Qualified		60 dB								50 ns	50 ohm	50 ns
ADG601BRM	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8			5.5 V	1.1 mm	3 mm	Not Qualified	NO	60 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY	-2.7 V	e0	BREAK-BEFORE-MAKE			120 ns	2.5 ohm	75 ns	.35 ohm	3 mm
ADG201HSKN	Analog Devices	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS		THROUGH-HOLE	-16.5 V	-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T16	SEPARATE OUTPUT		16.5 V	4.32 mm	7.62 mm	Not Qualified	NC	72 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 10.8 TO 16.5 SUPPLY RANGE	-13.5 V	e0	BREAK-BEFORE-MAKE			50 ns	75 ohm	50 ns	1.5 ohm	19.055 mm
ADG511ABR	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	MIL-STD-883	GULL WING	-5.5 V	-5 V	5 V	3.3/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	NC	68 dB	4.5 V		-4.5 V	e0	BREAK-BEFORE-MAKE			375 ns	50 ohm	150 ns		9.9 mm
ADG4613BRUZ	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	+-5/12	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	105 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	NO/NC	54 dB	3 V		-3 V	e3	BREAK-BEFORE-MAKE	30	260	149 ns	6.1 ohm	149 ns	.05 ohm	5 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.