LSSOP Multiplexers & Switches 548

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
TS5A2066DCTR	Texas Instruments	SPST	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	2	2		400 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.16	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.3 mm		2.8 mm	Not Qualified	NO	68 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	11.5 ns	120 ohm	5.2 ns	.9 ohm	2.95 mm	5.5 V
SN74LVC2G53DCTRG4	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	1	CMOS	300 kHz	GULL WING			2.3 V	3.3	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP8,.16	Multiplexers or Switches	.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	COMMON OUTPUT	1	5.5 V	1.3 mm	.1 A	2.8 mm	Not Qualified		50 dB	1.65 V				e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	7.2 ns	30 ohm	7.9 ns	5 ohm	2.95 mm
TS5A3159ADBVTG4	Texas Instruments	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0005 mA	1	1			GULL WING			1.8 V	1.8/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	1.95 V	1.45 mm		1.6 mm	Not Qualified		64 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	75 ns	2.5 ohm	50 ns	.15 ohm	2.9 mm	5.5 V
TS5A1066DBVR	Texas Instruments	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.005 mA	1	1		400 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	Matte Tin (Sn)	DUAL	R-PDSO-G5	COMMON OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	68 dB	1.65 V		0 V		e3	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	13 ns	80 ohm	5.5 ns		2.9 mm	6.5 V
TS5A2066DCTRG4	Texas Instruments	SPST	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1			GULL WING			1.8 V	1.8/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP8,.16	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8		1	5.5 V	1.3 mm		2.8 mm	Not Qualified	NO	68 dB	1.65 V				e4	BREAK-BEFORE-MAKE	30	260	11.5 ns	120 ohm	5.2 ns	.9 ohm	2.95 mm
SN74AUC1G66DBVRE4	Texas Instruments	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	1	CMOS		GULL WING			1.65 V	1.2/2.5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5	COMMON OUTPUT	1	2.7 V	1.45 mm		1.6 mm	Not Qualified	NO	55 dB	.8 V				e4	MAKE-BEFORE-BREAK	30	260	1.1 ns	20 ohm	2.9 ns		2.9 mm
SN74AUC2G53DCTRE4	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	1	CMOS	500 kHz	GULL WING			1.1 V	1.2/2.5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP8,.16	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	SEPARATE OUTPUT	1	2.7 V	1.3 mm	.1 A	2.8 mm	Not Qualified		59 dB	.8 V	BUILT-IN SPDT SWITCH	0 V		e4	MAKE-BEFORE-BREAK	NOT SPECIFIED	260	3.6 ns	40 ohm	3.6 ns	4 ohm	2.95 mm	3.6 V
TS5A4595DBVR	Texas Instruments	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0005 mA	1	1		450 kHz	GULL WING			3 V	3.3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	COMMON OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	82 dB	2 V		0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	30 ns	16 ohm	25 ns	16 ohm	2.9 mm	5.5 V
MAX4596DBVR	Texas Instruments	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	1		300 kHz	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	83 dB	2 V		0 V		e4	MAKE-BEFORE-BREAK	NOT SPECIFIED	260	45 ns	20 ohm	50 ns		2.9 mm	5.5 V
TS5A3159DBVTG4	Texas Instruments	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0001 mA	1	1		100 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified		63 dB	1.65 V	2-CHANNEL MUX/DEMUX	0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	95 ns	3.2 ohm	70 ns	.7 ohm	2.9 mm	5.5 V
TS5A4596DBVRG4	Texas Instruments	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0005 mA	1	1			GULL WING			3 V	3.3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5	COMMON OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	85 dB	2 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	30 ns	16 ohm	25 ns		2.9 mm	6 V
TS5A3154DCTRE6	Texas Instruments	SPDT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			GULL WING			1.8 V	1.8/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP8,.16	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G8	SEPARATE OUTPUT		5.5 V	1.3 mm		2.8 mm	Not Qualified		64 dB	1.65 V					MAKE-BEFORE-BREAK			20.5 ns	2.7 ohm	27.5 ns	.16 ohm	2.95 mm
TS5A4594DBVRE4	Texas Instruments	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0005 mA	1	1		450 kHz	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5	COMMON OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	82 dB	2 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	35 ns	16 ohm	30 ns		2.9 mm	5.5 V
TS5A3359DCTR	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	3			GULL WING			1.8 V	1.8/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP8,.16	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G8			5.5 V	1.3 mm		2.8 mm	Not Qualified		64 dB	1.65 V					BREAK-BEFORE-MAKE			85 ns	2.5 ohm	16 ns	.15 ohm	2.95 mm
TPS2530DBVT	Texas Instruments	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			GULL WING			5 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		.95 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	COMMON OUTPUT	2	5.5 V	1.45 mm		3.9 mm				2.7 V				e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	2500000 ns	.116 ohm	1900000 ns		4.9 mm
TS5A1066DBVRE4	Texas Instruments	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			GULL WING			1.8 V	1.8/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	68 dB	1.65 V				e4	BREAK-BEFORE-MAKE	30	260	13 ns	80 ohm	5.5 ns		2.9 mm
MAX4596DBVRE4	Texas Instruments	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	83 dB	2 V				e4	MAKE-BEFORE-BREAK	30	260	45 ns	20 ohm	50 ns		2.9 mm
TS5A4595DBVRG4	Texas Instruments	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			GULL WING			3 V	3.3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	82 dB	2 V				e4	BREAK-BEFORE-MAKE	30	260	30 ns	16 ohm	25 ns	16 ohm	2.9 mm
TS5A2066DCTRE4	Texas Instruments	SPST	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	2	1		400 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP8,.16	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.3 mm		2.8 mm	Not Qualified	NO	68 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	11.5 ns	120 ohm	5.2 ns	.9 ohm	2.95 mm	5.5 V
SN74AUC1G66DBVR	Texas Instruments	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	1	CMOS	500 kHz	GULL WING			1.65 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5		1	2.7 V	1.45 mm		1.6 mm	Not Qualified		55 dB	.8 V				e4		NOT SPECIFIED	260	1.1 ns	20 ohm	2.9 ns		2.9 mm
MAX4596DBVRG4	Texas Instruments	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	83 dB	2 V				e4	MAKE-BEFORE-BREAK	30	260	45 ns	20 ohm	50 ns		2.9 mm
TS5A3167DBVRE4	Texas Instruments	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	1		200 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	64 dB	1.65 V		0 V		e4	MAKE-BEFORE-BREAK	NOT SPECIFIED	260	19 ns	3.4 ohm	17.5 ns		2.9 mm	5.5 V
SN74LVC1G66DBVTE4	Texas Instruments	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			2.3 V	3.3	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexers or Switches	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	42 dB	1.65 V				e4	BREAK-BEFORE-MAKE	30	260	6.5 ns	20 ohm	6.9 ns		2.9 mm
SN74AUC2G53DCTR	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	1	CMOS	500 kHz	GULL WING			1.1 V	1.2/2.5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP8,.16	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	SEPARATE OUTPUT	1	2.7 V	1.3 mm	.1 A	2.8 mm	Not Qualified		59 dB	.8 V	BUILT-IN SPDT SWITCH	0 V		e4	MAKE-BEFORE-BREAK	NOT SPECIFIED	260	3.6 ns	40 ohm	3.6 ns	4 ohm	2.95 mm	3.6 V
MAX4594DBVRG4	Texas Instruments	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	1			GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5	COMMON OUTPUT	1	3.6 V	1.45 mm		1.6 mm	Not Qualified	NO	80 dB	2.7 V		0 V		e4	MAKE-BEFORE-BREAK	30	260	45 ns	20 ohm	50 ns		2.9 mm	5.5 V
MAX4594DBVR	Texas Instruments	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	1	CMOS	300 kHz	GULL WING			3 V	5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5		1	3.6 V	1.45 mm		1.6 mm	Not Qualified	NO	80 dB	2.7 V		0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	45 ns	20 ohm	50 ns		2.9 mm	5.5 V
TS5A63157DBVRE4	Texas Instruments	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			GULL WING			1.8 V	1.8/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm		1.6 mm	Not Qualified		60 dB	1.65 V				e4	BREAK-BEFORE-MAKE	30	260	24 ns	40 ohm	12 ns	.1 ohm	2.9 mm
TPS2069CDBVR	Texas Instruments	SPST	INDUSTRIAL		LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA					GULL WING					SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5	COMMON OUTPUT	2		1.45 mm		1.6 mm						0 V		e4	MAKE-BEFORE-BREAK	30	260					2.9 mm	5.5 V
MAX4597DBVRG4	Texas Instruments	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	83 dB	2 V				e4	MAKE-BEFORE-BREAK	30	260	45 ns	20 ohm	50 ns		2.9 mm
ADG752BRT-REEL	Analog Devices	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	COMMON OUTPUT	1	5.5 V	1.45 mm		1.65 mm	Not Qualified	NO/NC	80 dB	1.8 V	CAN ALSO BE OPERATED FROM 4.5 TO 5.5V			e0	BREAK-BEFORE-MAKE		240	18 ns	50 ohm	8 ns	.2 ohm	2.9 mm
ADG701LBRJZ-REEL7	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G5	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG3249BRJ-R2	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	CMOS		GULL WING			3 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8		1	3.6 V	1.45 mm		1.6 mm	Not Qualified			2.3 V				e0			240		28 ohm		.1 ohm	2.9 mm
ADG802BRT-R2	Analog Devices	SPST	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	2/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6			5.5 V	1.45 mm		1.65 mm	Not Qualified	NC	61 dB	1.8 V				e0	BREAK-BEFORE-MAKE			55 ns	.6 ohm	15 ns		2.9 mm
ADG701LBRJ-REEL7	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V				e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG702BRJ-REEL7	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V				e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns		2.9 mm
ADG702BRTZ-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns		2.9 mm
ADG620BRT-REEL	Analog Devices	SPDT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	+-3/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G8	COMMON OUTPUT		5.5 V	1.45 mm	.05 A	1.6 mm	Not Qualified	NO	67 dB	2.7 V	ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e3	MAKE-BEFORE-BREAK			65 ns	6.5 ohm	330 ns	.7 ohm	2.9 mm
ADG3249BRJZ-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	CMOS		GULL WING			3 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G8		1	3.6 V	1.45 mm		1.6 mm	Not Qualified			2.3 V				e3			260		28 ohm		.1 ohm	2.9 mm
ADG701BRJ-REEL7	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	55 dB	1.8 V				e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns		2.9 mm
ADG620BRT	Analog Devices	SPDT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	CMOS		GULL WING	-5.5 V	-5 V	5 V	+-3/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8			5.5 V	1.45 mm		1.6 mm	Not Qualified		67 dB	2.7 V			-2.7 V	e0	MAKE-BEFORE-BREAK			120 ns	6 ohm	75 ns	.7 ohm	2.9 mm
ADG701LBRTZ-REEL7	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG820BRT-REEL	Analog Devices	SPDT	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6			5.5 V	1.45 mm		1.65 mm	Not Qualified		71 dB	1.8 V				e0	MAKE-BEFORE-BREAK			35 ns	1.4 ohm	45 ns	.06 ohm	2.9 mm
ADG702LBRJZ-500RL7	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G5	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	55 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG701BRJ-500RL7	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	55 dB	1.8 V				e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns		2.9 mm
ADG602BRT	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G6			5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	60 dB	2.7 V			-2.7 V	e0	BREAK-BEFORE-MAKE	30	220	120 ns	2.5 ohm	75 ns	.35 ohm	2.9 mm
ADG619BRT-R2	Analog Devices	SPDT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	CMOS		GULL WING	-5.5 V	-5 V	5 V	+-3/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8			5.5 V	1.45 mm		1.6 mm	Not Qualified		67 dB	2.7 V			-2.7 V	e0	BREAK-BEFORE-MAKE			120 ns	6 ohm	75 ns	.7 ohm	2.9 mm
ADG620BRTZ-REEL7	Analog Devices	SPDT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	+-3/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	COMMON OUTPUT	1	5.5 V	1.45 mm	.05 A	1.6 mm	Not Qualified	NO	67 dB	2.7 V	ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e4	MAKE-BEFORE-BREAK		260	65 ns	6.5 ohm	330 ns	.7 ohm	2.9 mm
ADG702LBRT-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	55 dB	1.8 V				e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.