YES Multiplexers & Switches 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
FSA2866UMX	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	20	QCCN	SQUARE	YES	PLASTIC/EPOXY		2			NO LEAD				1.65/4.3	CHIP CARRIER	LCC20,.11SQ,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N20		1					Not Qualified							e4		30	260
FSA3157BL6X	Onsemi	SPDT	INDUSTRIAL	6	VBCC	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	BUTT			2.3 V	1.8/5	CHIP CARRIER, VERY THIN PROFILE	SOLCC6,.04,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM	BOTTOM	R-PBCC-B6	COMMON OUTPUT	1	5.5 V	.55 mm		1 mm	Not Qualified		57 dB	1.65 V	2:1 MULTIPLEXER/DEMULTIPLEXER BUS SWITCH			e4	BREAK-BEFORE-MAKE	30	260	13 ns	30 ohm	7 ns	.5 ohm	1.45 mm
FSA641UMX	Onsemi	SPDT	INDUSTRIAL	20	HVQCCN	SQUARE	YES	PLASTIC/EPOXY		1	1		NO LEAD			2.775 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N20		1	4.3 V	.55 mm		3 mm			50 dB	2.65 V				e4		30	260	37 ns	14 ohm	27 ns	.75 ohm	3 mm
FSA66P5X	Onsemi	SPST	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	1		GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G5		1	5.5 V	1.1 mm		1.25 mm	Not Qualified	NO	50 dB	1.65 V		0 V		e3	MAKE-BEFORE-BREAK	30	260	14.2 ns	60 ohm	18.2 ns	125 ohm	2 mm	5.5 V
FSUSB43L10X-F131	Fairchild Semiconductor	DPDT	INDUSTRIAL	10	QCCN	RECTANGULAR	YES	PLASTIC/EPOXY		1			NO LEAD				3/4.3	CHIP CARRIER	LCC10,.06X.08,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N10	SEPARATE OUTPUT	1					Not Qualified							e4	BREAK-BEFORE-MAKE	30	260		6.5 ohm
HEF4067BT,652	NXP Semiconductors	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	24	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.6 mA	1	16	CMOS	GULL WING		0 V	15 V	5/15	SMALL OUTLINE	SOP24,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G24		1		2.65 mm		7.5 mm	Not Qualified		50 dB					e4		30	260	100 ns	175 ohm	340 ns	5 ohm	15.4 mm
HV2701FG-G	Microchip Technology	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	48	LFQFP	SQUARE	YES	PLASTIC/EPOXY	4 mA	1	16	CMOS	GULL WING			5 V	3.3/5,+-40/+-160	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Multiplexer or Switches	.5 mm	70 Cel	0 Cel	MATTE TIN	QUAD	S-PQFP-G48			5.5 V	1.6 mm		7 mm	Not Qualified	NO	33 dB	3 V	IT ALSO REQUIRES VPP (40V TO VNN +200V) AND VNN (-40V TO -160V) SUPPLY	-30 V		e3				5000 ns	38 ohm	5000 ns	1.9 ohm	7 mm	30 V
ISL43120IHZ-T	Renesas Electronics	SPST	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS	GULL WING			3.3 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G8		3	12 V	1.45 mm		1.6 mm			76 dB	2.7 V				e3		30	260	200 ns	50 ohm	120 ns	2 ohm	2.9 mm
ISL54059IRTZ	Renesas Electronics	SPDT	INDUSTRIAL	10	HVSON	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS	NO LEAD			3 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-N10		1	6.5 V	.85 mm		3 mm				1.8 V				e3		30	260				.01 ohm	3 mm
ISL84051IBZ-T	Renesas Electronics	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS	GULL WING	-6 V	-5 V	3.3 V		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		3	6 V	1.75 mm		3.9 mm			90 dB	2 V	IT ALSO OPERATES AT SINGLE SUPPLY FROM 2V TO 12 V		-2 V	e3		30	260					9.9 mm
ISL84522IVZ	Renesas Electronics	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-6 V	-5 V	5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	6 V	1.2 mm		4.4 mm				2 V			-2 V	e3		30	260	100 ns	100 ohm	40 ns	1 ohm	5 mm
LMH6570MAX/NOPB	Texas Instruments	VIDEO MULTIPLEXER	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	16 mA	1	1		GULL WING	-6 V	-3.3 V	3.3 V	+-3.3/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SOP8,.25	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G8	COMMON OUTPUT	1	12 V	1.27 mm	.02 A	3.9 mm	Not Qualified	NC		6 V			-3 V	e3		30	260					4.9 mm
LMH6574MA	Texas Instruments	VIDEO MULTIPLEXER	INDUSTRIAL	14	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	18 mA	1	4		GULL WING	-6 V	-3.3 V	3.3 V	+-3.3/+-5	SMALL OUTLINE, SHRINK PITCH	SOP14,.25	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G14	COMMON OUTPUT	1	6 V	1.75 mm	.02 A	3.9 mm	Not Qualified	NC		3 V			-3 V	e0		NOT SPECIFIED	235					8.64 mm
LT1675CGN	Analog Devices	VIDEO MULTIPLEXER	COMMERCIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	BIPOLAR	GULL WING	-6 V	-5 V	5 V		SMALL OUTLINE, SHRINK PITCH			.635 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	6 V	1.75 mm		3.5 mm	Not Qualified			4 V			-4 V	e0								4.89 mm
LT1675CGN#TR	Analog Devices	VIDEO MULTIPLEXER	COMMERCIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	BIPOLAR	GULL WING	-6 V	-5 V	5 V		SMALL OUTLINE, SHRINK PITCH			.635 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	6 V	1.75 mm		3.5 mm	Not Qualified			4 V			-4 V	e0								4.89 mm
LT1675CGN#TRPBF	Analog Devices	VIDEO MULTIPLEXER	COMMERCIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	BIPOLAR	GULL WING	-6 V	-5 V	5 V		SMALL OUTLINE, SHRINK PITCH			.635 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	6 V	1.75 mm		3.5 mm	Not Qualified			4 V			-4 V	e3		30	260					4.89 mm
LTC1390CS#PBF	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS	GULL WING		-5 V	5 V		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.75 mm		3.9 mm	Not Qualified		70 dB		CAN ALSO OPERATE WITH 3 V SUPPLY			e3		30	260	400 ns	75 ohm	200 ns		9.9 mm
LTC201ACS#PBF	Analog Devices	SPST	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING		-15 V	15 V		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.752 mm		3.899 mm	Not Qualified		75 dB					e3		30	260	400 ns	125 ohm	300 ns	3.25 ohm	9.906 mm
LTC4306CUFD#PBF	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	24	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY		1	1		NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	70 Cel	0 Cel	MATTE TIN	QUAD	R-PQCC-N24		1	5.5 V	.8 mm		4 mm	Not Qualified			2.7 V				e3		30	260					5 mm
M74HC4051RM13TR	STMicroelectronics	SINGLE-ENDED MULTIPLEXER	MILITARY	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.08 mA	1	8	CMOS	GULL WING	-6 V	-4.5 V	4.5 V	2/6,GND/-6	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	125 Cel	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16		3	6 V	1.75 mm	.025 A	3.9 mm	Not Qualified		50 dB	1 V			-1 V	e4	BREAK-BEFORE-MAKE	30	260	225 ns	120 ohm	250 ns	5 ohm	9.9 mm
MAX14689EWL+	Analog Devices	DPDT	INDUSTRIAL	9	FBGA	SQUARE	YES	PLASTIC/EPOXY		1		BICMOS	BALL				1.8/5	GRID ARRAY, FINE PITCH	BGA9,3X3,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	TIN SILVER COPPER NICKEL	BOTTOM	S-PBGA-B9	SEPARATE OUTPUT	1					Not Qualified							e2	BREAK-BEFORE-MAKE	30	260		.55 ohm
MAX14803AEWZ+T	Analog Devices	SPST	INDUSTRIAL	110	FBGA	RECTANGULAR	YES	PLASTIC/EPOXY		16		BICMOS	BALL				3/5	GRID ARRAY, FINE PITCH	BGA110,10X11,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-PBGA-B110		1					Not Qualified							e1		30	260	3500 ns	48 ohm
MAX14803CCM+	Analog Devices	SPST	COMMERCIAL	48	LQFP	SQUARE	YES	PLASTIC/EPOXY		1	1	BICMOS	GULL WING			5 V	3/5	FLATPACK, LOW PROFILE	QFP48,.35SQ,20	Multiplexer or Switches	.8 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48		1	5.5 V	1.6 mm		7 mm	Not Qualified		50 dB	2.7 V				e3		30	260	3500 ns	48 ohm	3500 ns	2.4 ohm	7 mm
MAX14808ETK+T	Analog Devices	SPST	INDUSTRIAL	68	HVQCCN	SQUARE	YES	UNSPECIFIED		1	1	BICMOS	NO LEAD	-5.1 V	-5 V	5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N68		3	5.1 V	.8 mm		10 mm				4.9 V			-4.9 V	e3		30	260					10 mm
MAX308CSE	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS	GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	20 V	1.75 mm	.03 A	3.9 mm	Not Qualified		75 dB	4.5 V			-4.5 V	e0	BREAK-BEFORE-MAKE	20	240	150 ns	100 ohm	150 ns	1.5 ohm	9.9 mm
MAX308CSE+	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS	GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	20 V	1.75 mm	.03 A	3.9 mm	Not Qualified		75 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	100 ohm	150 ns	1.5 ohm	9.9 mm
MAX319ESA-T	Maxim Integrated	SPDT	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.005 mA	1	1	CMOS	GULL WING		-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8		1		1.75 mm		3.9 mm	Not Qualified		68 dB					e0	BREAK-BEFORE-MAKE		245	175 ns	35 ohm	175 ns	2 ohm	4.9 mm
MAX319ESA+T	Analog Devices	SPDT	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.005 mA	1	1	CMOS	GULL WING		-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8		1		1.75 mm		3.9 mm	Not Qualified		68 dB					e3	BREAK-BEFORE-MAKE	30	260	175 ns	35 ohm	175 ns	2 ohm	4.9 mm
MAX338CSE	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS	GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	20 V	1.75 mm	.03 A	3.9 mm	Not Qualified		75 dB	4.5 V			-4.5 V	e0	BREAK-BEFORE-MAKE			500 ns	400 ohm	500 ns	4 ohm	9.9 mm
MAX338CSE+	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS	GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	20 V	1.75 mm	.03 A	3.9 mm	Not Qualified		75 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	500 ns	400 ohm	500 ns	4 ohm	9.9 mm
MAX394EUP-T	Maxim Integrated	SPDT	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-8 V	-5 V	5 V	3.3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G20	SEPARATE OUTPUT	1	8 V	1.1 mm		4.4 mm	Not Qualified		66 dB	2.4 V			-2.4 V	e0	BREAK-BEFORE-MAKE			130 ns	35 ohm	75 ns	.5 ohm	6.5 mm
MAX394EUP+T	Analog Devices	SPDT	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-8 V	-5 V	5 V	3.3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G20	SEPARATE OUTPUT	1	8 V	1.1 mm		4.4 mm	Not Qualified		66 dB	2.4 V			-2.4 V	e3	BREAK-BEFORE-MAKE	30	260	130 ns	30 ohm	75 ns	.5 ohm	6.5 mm
MAX4311ESD-T	Maxim Integrated	VIDEO MULTIPLEXER	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	8.8 mA	1	4	BIPOLAR	GULL WING			5 V	5	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G14		1	10.5 V	1.75 mm	.12 A	3.9 mm	Not Qualified		82 dB	4 V				e0			245					8.65 mm
MAX4311ESD+T	Analog Devices	VIDEO MULTIPLEXER	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	8.8 mA	1	4	BIPOLAR	GULL WING			5 V	5	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G14		1	10.5 V	1.75 mm	.12 A	3.9 mm	Not Qualified		82 dB	4 V				e3		30	260					8.65 mm
MAX4355ECQ-TD	Maxim Integrated	CROSS POINT SWITCH	INDUSTRIAL	100	TFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16	BICMOS	GULL WING	-5.25 V	-3 V	3 V		FLATPACK, THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQFP-G100		3	5.25 V	1.2 mm		14 mm	Not Qualified		112 dB	2.25 V			-2.25 V	e0								14 mm
MAX4355ECQ+TD	Maxim Integrated	CROSS POINT SWITCH	INDUSTRIAL	100	TFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16	BICMOS	GULL WING	-5.25 V	-3 V	3 V		FLATPACK, THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel	TIN	QUAD	S-PQFP-G100		3	5.25 V	1.2 mm		14 mm	Not Qualified		112 dB	2.25 V			-2.25 V	e3								14 mm
MAX4527CSA	Maxim Integrated	SPDT	COMMERCIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	2	CMOS	GULL WING	-20 V	-15 V	15 V	+-15	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8	SEPARATE OUTPUT	1	20 V	1.75 mm	.02 A	3.9 mm	Not Qualified	NC		4.5 V		-4.5 V	-4.5 V	e0	BREAK-BEFORE-MAKE			250 ns	175 ohm	250 ns	.5 ohm	4.9 mm	20 V
MAX4527CSA+	Analog Devices	SPST	COMMERCIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS	GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8		1		1.75 mm		3.9 mm	Not Qualified		65 dB					e3	BREAK-BEFORE-MAKE	30	260	.2 ns	175 ohm	.2 ns	.5 ohm	4.9 mm
MAX4581ETE+	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	QCCN	SQUARE	YES	PLASTIC/EPOXY	.01 mA	1	8	BICMOS	NO LEAD				3/5/+-5	CHIP CARRIER	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-N16		1			.02 A		Not Qualified							e3	BREAK-BEFORE-MAKE	30	260	300 ns	550 ohm
MAX4599EXT-T	Maxim Integrated	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	2/5.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm		1.25 mm	Not Qualified		76 dB	2 V				e4	BREAK-BEFORE-MAKE		245	45 ns	95 ohm	35 ns	1 ohm	2 mm
MAX4599EXT+T	Analog Devices	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	2/5.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm		1.25 mm	Not Qualified		76 dB	2 V				e4	BREAK-BEFORE-MAKE	30	260	45 ns	95 ohm	35 ns	1 ohm	2 mm
MAX4604ESE	Maxim Integrated	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-20 V	-15 V	15 V	5/30/+-5/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.75 mm		3.9 mm	Not Qualified	NC	62 dB	4.5 V			-4.5 V	e0				220 ns	4 ohm		.2 ohm	9.9 mm
MAX4604ESE+	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-20 V	-15 V	15 V	5/30/+-5/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.75 mm		3.9 mm	Not Qualified	NC	62 dB	4.5 V			-4.5 V	e3		30	260	220 ns	4 ohm		.2 ohm	9.9 mm
MAX4638ESE-T	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	8	CMOS	GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-2.5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	2.75 V	1.75 mm		3.9 mm	Not Qualified			2.25 V			-2.25 V	e0	BREAK-BEFORE-MAKE			20 ns	3.5 ohm	20 ns	.2 ohm	9.9 mm
MAX4638ESE+T	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	8	CMOS	GULL WING	-2.75 V	-2.5 V	2.5 V	+-2.5/3/5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	2.75 V	1.75 mm	.03 A	3.9 mm	Not Qualified			2.25 V			-2.25 V	e3	BREAK-BEFORE-MAKE	30	260	20 ns	3.5 ohm	20 ns	.2 ohm	9.9 mm
MAX4784EGE	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	VQCCN	SQUARE	YES	CERAMIC, METAL-SEALED COFIRED		4	2	CMOS	NO LEAD			1.8 V	1.8/3	CHIP CARRIER, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-CQCC-N16		1	3.6 V	1 mm	.15 A	4 mm	Not Qualified			1.6 V				e0	BREAK-BEFORE-MAKE			30 ns	3 ohm	15 ns		4 mm
MAX4854HETE	Maxim Integrated	SPST	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS	NO LEAD			3 V	3/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N16	SEPARATE OUTPUT	1	5.5 V	.8 mm		3 mm	Not Qualified	NO	80 dB	2 V				e0	BREAK-BEFORE-MAKE		245	60 ns	9 ohm	40 ns	.2 ohm	3 mm
MAX4854HETE+	Analog Devices	SPST	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS	NO LEAD			3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N16		1	5.5 V	.8 mm		3 mm	Not Qualified		80 dB	2 V				e3		30	260	60 ns	9 ohm	40 ns	.2 ohm	3 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.