AUTOMOTIVE Multiplexers & Switches 2,025

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
ADG5413FBCPZ-RL7	Analog Devices	SPST	AUTOMOTIVE	16	HQCCN	SQUARE	YES	UNSPECIFIED		4	1	DMOS		NO LEAD	-22 V	-15 V	15 V		CHIP CARRIER, HEAT SINK/SLUG	LCC16,.16SQ,25		.65 mm	125 Cel	-40 Cel		QUAD	S-XQCC-N16	SEPARATE OUTPUT		22 V	.8 mm		4 mm		NO/NC	70 dB	5 V		-5 V	-5 V		BREAK-BEFORE-MAKE	NOT SPECIFIED	NOT SPECIFIED		11.2 ohm		.05 ohm	4 mm	22 V
ADG2108YCPZ-REEL7	Analog Devices	CROSS POINT SWITCH	AUTOMOTIVE	32	HVQCCN	SQUARE	YES	UNSPECIFIED		1	10	CMOS		NO LEAD	-5.5 V	-5 V	5 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	3	5.5 V	1 mm		5 mm	Not Qualified		64 dB	4.5 V			-4.5 V	e3	MAKE-BEFORE-BREAK			200 ns	75 ohm	250 ns	4.5 ohm	5 mm
ADG813YCP-REEL	Analog Devices	SPST	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS		NO LEAD			2.5 V	1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N16			3.6 V	1 mm		3 mm	Not Qualified	NO	67 dB	1.65 V				e0	BREAK-BEFORE-MAKE			27 ns	.72 ohm	6 ns	.04 ohm	3 mm
ADG819BRM	Analog Devices	SPDT	AUTOMOTIVE	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	Tin/Lead (Sn85Pb15)	DUAL	S-PDSO-G8		1	5.5 V	1.09 mm		3 mm	Not Qualified		71 dB	1.8 V				e0	BREAK-BEFORE-MAKE	30	240	60 ns	1.4 ohm	16 ns	.06 ohm	3 mm
ADG802BRT	Analog Devices	SPST	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	2/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6			5.5 V	1.45 mm		1.65 mm	Not Qualified	NC	61 dB	1.8 V				e0	BREAK-BEFORE-MAKE			55 ns	.6 ohm	15 ns		2.9 mm
ADG1213YRU	Analog Devices	SPST	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	16.5 V	1.1 mm		4.4 mm	Not Qualified		75 dB	13.5 V	ALSO OPERATES AT +12 V SUPPLY		-13.5 V	e0	BREAK-BEFORE-MAKE	30	240		120 ohm		5 ohm	5 mm
ADG5413BRUZ	Analog Devices	SPST	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		NO LEAD	-16.5 V	-15 V	15 V	+-9/+-22/9/40	SMALL OUTLINE	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-N16	SEPARATE OUTPUT	1	16.5 V	1.2 mm		4.4 mm	Not Qualified	NO/NC	78 dB	13.5 V	2 SWITCHES WITH INVERTED LOGIC		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	262 ns	11 ohm	182 ns	.35 ohm	5 mm
ADG812YCP	Analog Devices	SPST	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS		NO LEAD			2.5 V	1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N16			3.6 V	1 mm		3 mm	Not Qualified	NC	67 dB	1.65 V				e0	BREAK-BEFORE-MAKE			27 ns	.72 ohm	6 ns	.04 ohm	3 mm
ADG1221BRMZ	Analog Devices	SPST	AUTOMOTIVE	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	16.5 V	1.1 mm		3 mm	Not Qualified		75 dB	5 V	ALSO OPERATES AT 12V SINGLE SUPPLY		-5 V	e3	BREAK-BEFORE-MAKE	30	260	240 ns	200 ohm	140 ns	2.5 ohm	3 mm
ADG5233BRUZ-RL7	Analog Devices	SPDT	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	1	CMOS		GULL WING	-22 V	-15 V	15 V	+-9/+-22/9/40	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	22 V	1.2 mm		4.4 mm	Not Qualified		75 dB	9 V	VIDEO APPLICATION		-9 V	e3	BREAK-BEFORE-MAKE	30	260	290 ns	200 ohm	125 ns	3.5 ohm	5 mm
ADG812YCP-REEL7	Analog Devices	SPST	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS		NO LEAD			2.5 V	1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N16			3.6 V	1 mm		3 mm	Not Qualified	NC	67 dB	1.65 V				e0	BREAK-BEFORE-MAKE			27 ns	.72 ohm	6 ns	.04 ohm	3 mm
ADG5409BCPZ-REEL7	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED	.13 mA	1	4	CMOS		NO LEAD	-22 V	-15 V	15 V	+-9/+-22/9/40	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16		3	22 V	.8 mm	.03 A	4 mm	Not Qualified		60 dB	9 V			-9 V	e3	BREAK-BEFORE-MAKE	30	260	242 ns	22 ohm	198 ns	.8 ohm	4 mm
ADG819BRT-R2	Analog Devices	SPDT	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6			5.5 V	1.45 mm		1.65 mm	Not Qualified		71 dB	1.8 V				e0	BREAK-BEFORE-MAKE			60 ns	1.4 ohm	16 ns	.06 ohm	2.9 mm
ADG659WYRUZ-REEL7	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS	AEC-Q100	GULL WING	-6 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	6 V	1.2 mm	.02 A	4.4 mm	Not Qualified	NC	90 dB	2 V	ALSO OPERATE WITH 2 V TO 12 V		-2 V	e3	BREAK-BEFORE-MAKE	30	260	490 ns	400 ohm	110 ns	2 ohm	5 mm
ADG439FBN	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	4	CMOS		THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T16				5.33 mm	.02 A	7.62 mm	Not Qualified		93 dB		FAULT PROTECTED; OVERVOLTAGE PROTECTION			e0	BREAK-BEFORE-MAKE			345 ns	270 ohm	173 ns	8.1 ohm	20.07 mm
ADG1423BCPZ-REEL7	Analog Devices	SPST	AUTOMOTIVE	10	HVSON	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		NO LEAD	-5.5 V	-5 V	5 V	+-5/+-15/12	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-N10		3	5.5 V	.8 mm		3 mm	Not Qualified	NO/NC	60 dB	4.5 V	ALSO OPERATES ON PLUS OR MINUS 15V AND PLUS 12V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	520 ns	7 ohm	395 ns	.04 ohm	3 mm
ADG5413BCPZ-REEL7	Analog Devices	SPST	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS		NO LEAD	-16.5 V	-15 V	15 V	+-9/+-22/9/40	CHIP CARRIER	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	SEPARATE OUTPUT		16.5 V	.8 mm		4 mm	Not Qualified	NO/NC	78 dB	13.5 V	2 SWITCHES WITH INVERTED LOGIC		-13.5 V	e3	BREAK-BEFORE-MAKE			262 ns	11 ohm	182 ns	.35 ohm	4 mm
ADG1212YCP	Analog Devices	SPST	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS		NO LEAD	-16.5 V	-15 V	15 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N16			16.5 V	1 mm		4 mm	Not Qualified		75 dB	13.5 V	ALSO OPERATES AT +12 V SUPPLY		-13.5 V	e0					120 ohm		5 ohm	4 mm
ADG836YCP	Analog Devices	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	12	HVQCCN	SQUARE	YES	UNSPECIFIED		2	2	CMOS		NO LEAD			1.8 V	1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC12,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N12	SEPARATE OUTPUT		1.95 V	1 mm		3 mm	Not Qualified	NO/NC	67 dB	1.65 V	CAN ALSO OPERATE WITH 2.5V AND 3.3V SUPPLIES			e0	BREAK-BEFORE-MAKE			37 ns	1.4 ohm	9 ns	.1 ohm	3 mm
ADG1404YCPZ-500RL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED	.3 mA	1	4	CMOS		NO LEAD	-5.5 V	-5 V	5 V	+-15/+12/+-5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16		1	5.5 V	1 mm	.03 A	4 mm	Not Qualified		50 dB	4.5 V	CAN ALSO OPERATES AT 12 V AND +/-15 V SUPPLY		-4.5 V	e3	BREAK-BEFORE-MAKE			120 ns	5 ohm	125 ns	.1 ohm	4 mm
ADG1613BCPZ-REEL	Analog Devices	SPST	AUTOMOTIVE	16	QCCN	SQUARE	YES	UNSPECIFIED		4		CMOS		NO LEAD				3.3/12/+-5	CHIP CARRIER	LCC16,.16SQ,25	Multiplexer or Switches	.635 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	SEPARATE OUTPUT	3					Not Qualified	NO/NC						e3	BREAK-BEFORE-MAKE	30	260	493 ns	4 ohm
ADG709BRU-REEL7	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	COMMON OUTPUT	1	2.75 V	1.2 mm	.03 A	4.4 mm	Not Qualified		60 dB	2.25 V	ALSO OPERATE WITH 1.8V TO 5.5V SINGLE SUPPLY		-2.25 V	e0	BREAK-BEFORE-MAKE	30	240	25 ns	4.5 ohm	15 ns	.4 ohm	5 mm
ADG813YCP-REEL7	Analog Devices	SPST	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS		NO LEAD			2.5 V	1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N16			3.6 V	1 mm		3 mm	Not Qualified	NO	67 dB	1.65 V				e0	BREAK-BEFORE-MAKE			27 ns	.72 ohm	6 ns	.04 ohm	3 mm
ADG5248FBRUZ-RL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	20	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8			GULL WING	-16.5 V	-15 V	15 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G20		1	16.5 V	1.2 mm		4.4 mm			75 dB	13.5 V			-13.5 V	e3		30	260	315 ns	270 ohm	160 ns	2.5 ohm	6.5 mm
ADG439FBRW-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	CMOS		GULL WING		-15 V	15 V		SMALL OUTLINE			1.27 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16				2.65 mm		7.5 mm	Not Qualified		93 dB		FAULT PROTECTED; OVERVOLTAGE PROTECTION			e0				345 ns	270 ohm	173 ns	8.1 ohm	10.3 mm
ADG822BRM	Analog Devices	SPST	AUTOMOTIVE	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			3.6 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	52 dB	1.8 V				e0	BREAK-BEFORE-MAKE		240	67 ns	1.4 ohm	18 ns	.16 ohm	3 mm
ADG801BCBZ-REEL7	Analog Devices	SPST	AUTOMOTIVE	6	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		BALL			3 V	3/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-PBGA-B6			5.5 V	.67 mm		1.14 mm	Not Qualified	NO	61 dB	1.8 V				e1	BREAK-BEFORE-MAKE			55 ns	.6 ohm	15 ns		2.18 mm
ADG1211YRU	Analog Devices	SPST	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	16.5 V	1.1 mm		4.4 mm	Not Qualified		75 dB	13.5 V	ALSO OPERATES AT +12 V SUPPLY		-13.5 V	e0		30	240		120 ohm		5 ohm	5 mm
ADG804YRM-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.004 mA	1	4	CMOS		GULL WING			2.5 V	1.8/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G10		1	3.6 V	1.1 mm	.3 A	3 mm	Not Qualified		67 dB	1.65 V				e0	BREAK-BEFORE-MAKE		240	30 ns	.77 ohm	7 ns	.4 ohm	3 mm
ADG1436YCPZ-500RL7	Analog Devices	SPDT	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED		2	1	CMOS		NO LEAD	-5.5 V	-5 V	5 V	+-5/+12/+-15	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	SEPARATE OUTPUT	1	5.5 V	1 mm		4 mm	Not Qualified		50 dB	4.5 V	CAN ALSO OPERATES AT 12 V AND +/-15 V SUPPLY		-4.5 V	e3	BREAK-BEFORE-MAKE			105 ns	4 ohm	125 ns	.1 ohm	4 mm
ADG802BCBZ-REEL7	Analog Devices	SPST	AUTOMOTIVE	6	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		BALL			3 V	3/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-PBGA-B6			5.5 V	.67 mm		1.14 mm	Not Qualified	NC	61 dB	1.8 V				e1	BREAK-BEFORE-MAKE			55 ns	.6 ohm	15 ns		2.18 mm
ADG1409YRU	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.3 mA	1	4	CMOS		GULL WING	-5.5 V	-5 V	5 V	+-15/+12/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	5.5 V	1.2 mm	.03 A	4.4 mm	Not Qualified		75 dB	4.5 V			-4.5 V	e0	BREAK-BEFORE-MAKE	30	240	150 ns	7 ohm	150 ns	.5 ohm	5 mm
ADG1236YCP	Analog Devices	SPDT	AUTOMOTIVE	12	HVQCCN	SQUARE	YES	UNSPECIFIED		1	1	CMOS		NO LEAD	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC12,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N12	SEPARATE OUTPUT		16.5 V	.8 mm		3 mm	Not Qualified		75 dB	13.5 V			-13.5 V	e0	BREAK-BEFORE-MAKE				120 ohm		5 ohm	3 mm
ADG5413BFBRUZ-RL7	Analog Devices	SPST	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1			GULL WING	-22 V	-15 V	15 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	22 V	1.2 mm		4.4 mm				5 V			-5 V	e3		30	260		11.2 ohm		.05 ohm	5 mm
ADG836YRMZ	Analog Devices	SPDT	AUTOMOTIVE	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	2	CMOS		GULL WING			1.8 V	1.8/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	1.95 V	1.1 mm		3 mm	Not Qualified	NC	67 dB	1.65 V	CAN ALSO OPERATE WITH 2.5V AND 3.3V SUPPLIES			e3	BREAK-BEFORE-MAKE	40	260	37 ns	1.4 ohm	9 ns	.1 ohm	3 mm
ADG801BRM-REEL	Analog Devices	SPST	AUTOMOTIVE	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	Tin/Lead (Sn85Pb15)	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	61 dB	1.8 V				e0	BREAK-BEFORE-MAKE		240	55 ns	.6 ohm	15 ns		3 mm
ADG1408YCP	Analog Devices	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED	.3 mA	1	8	CMOS		NO LEAD	-5.5 V	-5 V	5 V	+-15/+12/+-5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N16			5.5 V	.9 mm	.03 A	4 mm	Not Qualified		75 dB	4.5 V			-4.5 V	e0	BREAK-BEFORE-MAKE			150 ns	7 ohm	150 ns	.5 ohm	4 mm
ADG774BRQ	Analog Devices	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	4	2	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	3.3 V	1.7526 mm	.1 A	3.9116 mm	Not Qualified		65 dB	2.7 V	ALSO OPERATE AT 5V SUPPLY			e0	BREAK-BEFORE-MAKE		240	21 ns	9 ohm	11 ns	.15 ohm	4.9022 mm
ADG612YRU-REEL	Analog Devices	SPST	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.1 mm		4.4 mm	Not Qualified	NO	65 dB	2.7 V			-2.7 V	e0	BREAK-BEFORE-MAKE	30	240	65 ns	115 ohm	40 ns	2 ohm	5 mm
ADG811YCP	Analog Devices	SPST	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS		NO LEAD			2.5 V	1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N16			3.6 V	1 mm		3 mm	Not Qualified	NO	67 dB	1.65 V				e0	BREAK-BEFORE-MAKE			27 ns	.72 ohm	6 ns	.04 ohm	3 mm
ADG1211YCPZ-REEL7	Analog Devices	SPST	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS		NO LEAD	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	SEPARATE OUTPUT	3	16.5 V	.9 mm		3 mm	Not Qualified		75 dB	13.5 V	ALSO OPERATES AT +12 V SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE		260	125 ns	120 ohm		5 ohm	3 mm
ADG5412WBCPZ-REEL7	Analog Devices	SPST	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	4	CMOS	AEC-Q100	NO LEAD	-22 V	-15 V	15 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16		3	22 V	.8 mm		4 mm			78 dB	9 V			-9 V	e3		30	260	262 ns	16 ohm	182 ns	.35 ohm	4 mm
ADG801BRM	Analog Devices	SPST	AUTOMOTIVE	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	61 dB	1.8 V				e0	BREAK-BEFORE-MAKE		240	55 ns	.6 ohm	15 ns		3 mm
ADG658YRQ-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	8	CMOS		GULL WING	-6 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16			6 V	1.7526 mm	.02 A	3.9116 mm	Not Qualified		90 dB	2 V	ALSO OPERATE WITH 2 V TO 12 V SINGLE SUPPLY		-2 V	e0	BREAK-BEFORE-MAKE			115 ns	75 ohm	45 ns	1.3 ohm	4.9022 mm
ADG719BRMZ-REEL	Analog Devices	SPDT	AUTOMOTIVE	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified		67 dB	1.8 V				e3	BREAK-BEFORE-MAKE	30	260	15 ns	12 ohm	8 ns	.1 ohm	3 mm
ADG611YRU-REEL7	Analog Devices	SPST	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.1 mm		4.4 mm	Not Qualified	NC	65 dB	2.7 V			-2.7 V	e0	BREAK-BEFORE-MAKE		240	65 ns	115 ohm	40 ns	2 ohm	5 mm
ADG1208YCP	Analog Devices	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED	.3 mA	1	8	CMOS		NO LEAD	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N16			16.5 V	.9 mm	.03 A	4 mm	Not Qualified		75 dB	13.5 V			-13.5 V	e0	BREAK-BEFORE-MAKE			150 ns	160 ohm	150 ns	5 ohm	4 mm
ADG1402BRMZ-REEL7	Analog Devices	SPST	AUTOMOTIVE	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-16.5 V	-5 V	5 V	+-5/+12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8		1	16.5 V	1.1 mm		3 mm	Not Qualified	NC	58 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	375 ns	2.7 ohm			3 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.