INDUSTRIAL Multiplexers & Switches 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
MPC506AP	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	16	CMOS		THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP28,.6	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T28				6.35 mm	.02 A	15.24 mm	Not Qualified		68 dB					e4	BREAK-BEFORE-MAKE			500 ns	1500 ohm	500 ns		37.4 mm
SN74HC4316J4	Texas Instruments	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	CERAMIC		4		CMOS		THROUGH-HOLE				2/6,GND/-6	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel		DUAL	R-XDIP-T16	SEPARATE OUTPUT							NO							BREAK-BEFORE-MAKE
HD3SS3202IRSVR	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	VQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	.6 mA	1	2		10000 kHz	NO LEAD			3.3 V		CHIP CARRIER, VERY THIN PROFILE			.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD SILVER	QUAD	R-PQCC-N16		1	3.6 V	.55 mm		1.8 mm				3 V				e4		30	260		8 ohm			2.6 mm
TS5A3159YEPR	Texas Instruments	SPDT	INDUSTRIAL		BGA		YES	PLASTIC/EPOXY		1	1			BALL			1.8 V	2/5	GRID ARRAY	BGA(UNSPEC)	Multiplexer or Switches		85 Cel	-40 Cel		BOTTOM				5.5 V				Not Qualified		63 dB	1.65 V					BREAK-BEFORE-MAKE			70 ns	3.2 ohm	55 ns	.7 ohm
TS5A23160DGSTE4	Texas Instruments	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	2	1		100 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	64 dB	1.65 V		0 V		e4	MAKE-BEFORE-BREAK	30	260	14.5 ns	2.5 ohm	21.5 ns	.15 ohm	3 mm	5.5 V
OPA3875IDBQG4	Texas Instruments	VIDEO MULTIPLEXER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	36 mA	1	2	BIPOLAR		GULL WING	-6.3 V	-5 V	5 V	+-5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		2	6.3 V	1.75 mm		3.9 mm	Not Qualified			3 V			-3 V	e4		30	260					4.9 mm
SN74LVC1G66YZAR	Texas Instruments	SPST	INDUSTRIAL	5	VFBGA	RECTANGULAR	YES	UNSPECIFIED		1	1	CMOS		BALL			2.3 V	1.8/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA5,2X3,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		BOTTOM	R-XBGA-B5			5.5 V	.5 mm		.9 mm	Not Qualified	NO	42 dB	1.65 V					BREAK-BEFORE-MAKE	NOT SPECIFIED	NOT SPECIFIED	6.5 ns	20 ohm	6.9 ns		1.4 mm
SN74AHC4066DG4	Texas Instruments	SPST	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.02 mA	4	4	CMOS	50 kHz	GULL WING			2.3 V	2.5/5	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	SEPARATE OUTPUT	1	5.5 V	1.75 mm		3.9 mm	Not Qualified	NO	40 dB	2 V				e4	BREAK-BEFORE-MAKE	30	260	25 ns	225 ohm	25 ns	6 ohm	8.65 mm
TS5A3154DCTRE6	Texas Instruments	SPDT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			GULL WING			1.8 V	1.8/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP8,.16	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G8	SEPARATE OUTPUT		5.5 V	1.3 mm		2.8 mm	Not Qualified		64 dB	1.65 V					MAKE-BEFORE-BREAK			20.5 ns	2.7 ohm	27.5 ns	.16 ohm	2.95 mm
SN74LV4051ADBLE	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS		GULL WING			2.5 V		SMALL OUTLINE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G16			5.5 V	2 mm		5.3 mm	Not Qualified			2 V									180 ohm		2.1 ohm	6.2 mm
SN74LV4066ANSRE4	Texas Instruments	SPST	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING			2.3 V	2.5/5	SMALL OUTLINE	SOP14,.3	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	SEPARATE OUTPUT	1	5.5 V	2 mm		5.3 mm	Not Qualified	NO	40 dB	2 V				e4	MAKE-BEFORE-BREAK	30	260	25 ns	180 ohm	25 ns	6 ohm	10.2 mm
TS5A3359YZPRB	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	8	FBGA	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	1		75 kHz	BALL				1.8/5	GRID ARRAY, FINE PITCH	BGA8,2X4,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-PBGA-B8	SEPARATE OUTPUT	1		.31 mm		2.25 mm	Not Qualified	NO						e1	BREAK-BEFORE-MAKE	30	260	85 ns	3.5 ohm			1.25 mm
TS5A2053YZPR	Texas Instruments	SPDT	INDUSTRIAL	8	VFBGA	RECTANGULAR	YES	UNSPECIFIED		1	1			BALL			1.8 V	1.8/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA8,2X4,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		BOTTOM	R-XBGA-B8			5.5 V	.5 mm		.9 mm	Not Qualified		64 dB	1.65 V					BREAK-BEFORE-MAKE			14.5 ns	120 ohm	6.5 ns	2 ohm	1.9 mm
LMS4684LD	Texas Instruments	SPDT	INDUSTRIAL	10	SON	RECTANGULAR	YES	PLASTIC/EPOXY		2		CMOS		NO LEAD			3 V	3	SMALL OUTLINE	SOLCC10,.16,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-N10	SEPARATE OUTPUT	1					Not Qualified	NO/NC						e0	BREAK-BEFORE-MAKE	20	235	65 ns	.8 ohm
SN74AUC2G53DCURE4	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	8	VSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	2	CMOS		GULL WING			1.1 V	1.2/2.5	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8		1	2.7 V	.9 mm	.1 A	2 mm	Not Qualified		59 dB	.8 V	BUILT-IN SPDT SWITCH			e4		30	260	3.6 ns	40 ohm	3.6 ns	4 ohm	2.3 mm
TS5A3154YEPR	Texas Instruments	SPDT	INDUSTRIAL	8	VFBGA	RECTANGULAR	YES	UNSPECIFIED		1	1			BALL			1.8 V	1.8/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA8,2X4,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		BOTTOM	R-XBGA-B8	SEPARATE OUTPUT		5.5 V	.5 mm		.9 mm	Not Qualified		64 dB	1.65 V					MAKE-BEFORE-BREAK			20.5 ns	2.7 ohm	27.5 ns	.16 ohm	1.9 mm
SN74AHC4051DGVR	Texas Instruments		INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS		GULL WING				2/5.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G16							Not Qualified									NOT SPECIFIED	NOT SPECIFIED		225 ohm
PCA9546AGQNR	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		2	4			BALL			5 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.65 mm	85 Cel	-40 Cel		BOTTOM	R-PBGA-B20			5.5 V	1 mm		3 mm				2.3 V									45 ohm		16 ohm	4 mm
SN74LV4066APWG4	Texas Instruments	SPST	INDUSTRIAL	14	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING			2.3 V	2.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	SEPARATE OUTPUT	1	5.5 V	1.2 mm		4.4 mm	Not Qualified	NO	40 dB	2 V				e4	MAKE-BEFORE-BREAK	30	260	25 ns	180 ohm	25 ns	6 ohm	5 mm
SN74AHC4066NSE4	Texas Instruments	SPST	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING			2.3 V		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14		1	5.5 V	2 mm		5.3 mm	Not Qualified		40 dB	2 V				e4				25 ns	180 ohm	25 ns	6 ohm	10.2 mm
TS5A4596DCKR	Texas Instruments	SPST	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0005 mA	1	1		450 kHz	GULL WING			3 V	3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	COMMON OUTPUT	1	5.5 V	1.1 mm		1.25 mm	Not Qualified	NO	85 dB	2 V		0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	30 ns	16 ohm	25 ns		2 mm	5.5 V
SN74HC4316N1	Texas Instruments	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4		CMOS		THROUGH-HOLE				2/6,GND/-6	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel		DUAL	R-PDIP-T16	SEPARATE OUTPUT						Not Qualified	NO							BREAK-BEFORE-MAKE
SN74LVC1G66DSFR	Texas Instruments	SPDT	INDUSTRIAL	6	VSON	SQUARE	YES	PLASTIC/EPOXY	.01 mA	1	1		300 kHz	NO LEAD			1.8 V		SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,14		.35 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N6		1	5.5 V	.4 mm	.1 A	1 mm	Not Qualified	NC	58 dB	1.65 V				e4	BREAK-BEFORE-MAKE	30	260	12 ns	120 ohm	10 ns	12 ohm	1 mm
TS5A623157RSER	Texas Instruments	SPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	PLASTIC/EPOXY		2	2			NO LEAD			1.8 V	3.3/5	CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.08,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		QUAD	R-PQCC-N10	SEPARATE OUTPUT		5.5 V	.6 mm		1.5 mm	Not Qualified		60 dB	1.65 V					BREAK-BEFORE-MAKE			24 ns	40 ohm	12 ns	.1 ohm	2 mm
TS3L500RHURG4	Texas Instruments	SPDT	INDUSTRIAL	56	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	.5 mA	8	11		1100 kHz	NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC56,.19X.43,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD SILVER	QUAD	R-PQCC-N56	SEPARATE OUTPUT	1	3.6 V	.8 mm	.128 A	5 mm	Not Qualified		37 dB	3 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	15 ns	6 ohm	9 ns	1 ohm	11 mm	5.5 V
SN74LV4053ADGV	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	2	CMOS		GULL WING			2.3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.4 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G16			5.5 V	1.2 mm		3.6 mm	Not Qualified		45 dB	2 V								28 ns	180 ohm	28 ns	2 ohm	4.4 mm
TS5A4594DBVRE4	Texas Instruments	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0005 mA	1	1		450 kHz	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5	COMMON OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	82 dB	2 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	35 ns	16 ohm	30 ns		2.9 mm	5.5 V
SN74AHC4066DGVR	Texas Instruments	SPST	INDUSTRIAL	14	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.02 mA	4	4	CMOS	50 kHz	GULL WING			2.3 V	2/5.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	SEPARATE OUTPUT	1	5.5 V	1.2 mm		3.6 mm	Not Qualified	NO	40 dB	2 V				e4	BREAK-BEFORE-MAKE	30	260	25 ns	225 ohm	25 ns	6 ohm	4.4 mm
SN74LV4052ANSE4	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	CMOS		GULL WING			2.3 V		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1	5.5 V	2 mm		5.3 mm	Not Qualified		45 dB	2 V				e4		30	260	28 ns	180 ohm	28 ns	1.5 ohm	10.2 mm
CD4066BCJ	Texas Instruments	SPST	INDUSTRIAL	14	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		4	1	CMOS		THROUGH-HOLE			5 V		IN-LINE			2.54 mm	85 Cel	-40 Cel		DUAL	R-GDIP-T14			15 V	5.08 mm		7.62 mm				3 V	LG-MAX							125 ns	1050 ohm	125 ns	10 ohm	19.43 mm
SN74AHC4066DRE4	Texas Instruments	SPST	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING			2.3 V	2.5/5	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	SEPARATE OUTPUT	1	5.5 V	1.75 mm		3.9 mm	Not Qualified	NO	40 dB	2 V				e4		30	260	25 ns	180 ohm	25 ns	6 ohm	8.65 mm
TS5A3359DCTR	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	3			GULL WING			1.8 V	1.8/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP8,.16	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G8			5.5 V	1.3 mm		2.8 mm	Not Qualified		64 dB	1.65 V					BREAK-BEFORE-MAKE			85 ns	2.5 ohm	16 ns	.15 ohm	2.95 mm
SN74LV4066ADBR	Texas Instruments	SPST	INDUSTRIAL	14	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.035 mA	4	4	CMOS	50 kHz	GULL WING			2.3 V	2.5/5	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	SEPARATE OUTPUT	1	5.5 V	2 mm		5.3 mm	Not Qualified	NO	40 dB	2 V		2 V		e4	MAKE-BEFORE-BREAK	30	260	25 ns	180 ohm	25 ns	6 ohm	6.2 mm	5.5 V
SN74HC4016NP1	Texas Instruments	SPST	INDUSTRIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4		CMOS		THROUGH-HOLE				2/12	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel		DUAL	R-PDIP-T14	SEPARATE OUTPUT						Not Qualified	NO							BREAK-BEFORE-MAKE
TS5A3153YEPR	Texas Instruments	SPDT	INDUSTRIAL	8	VFBGA	RECTANGULAR	YES	UNSPECIFIED		1	1			BALL			1.8 V	1.8/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA8,2X4,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		BOTTOM	R-XBGA-B8			5.5 V	.5 mm		.9 mm	Not Qualified		64 dB	1.65 V	2-CHANNEL MUX/DEMUX				BREAK-BEFORE-MAKE			61 ns	2.7 ohm	19 ns	.16 ohm	1.9 mm
TS5A23167DCURE4	Texas Instruments	SPST	INDUSTRIAL	8	VSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1			GULL WING			1.8 V	1.8/5	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8		1	5.5 V	.9 mm		2 mm	Not Qualified	NC	62 dB	1.65 V				e4	BREAK-BEFORE-MAKE	30	260	18 ns	3.9 ohm	15.5 ns	.04 ohm	2.3 mm
PCA9543ADRG4	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2			GULL WING			2.5 V		SMALL OUTLINE	SOP14,.4		1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	COMMON OUTPUT	1	5.5 V	1.75 mm		3.9 mm				2.3 V						30	260		50 ohm			8.65 mm
SN74HC4051N3	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	8	CMOS		THROUGH-HOLE				2/6,GND/-6	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel		DUAL	R-PDIP-T16					.025 A										BREAK-BEFORE-MAKE
TS5A63157YZPR	Texas Instruments	SPDT	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES	UNSPECIFIED		1	1			BALL			1.8 V	1.8/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		BOTTOM	R-XBGA-B6			5.5 V	.5 mm		.9 mm	Not Qualified		60 dB	1.65 V					BREAK-BEFORE-MAKE			24 ns	40 ohm	12 ns	.1 ohm	1.4 mm
MPC507APG4	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	8	CMOS		THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP28,.6	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T28				6.35 mm	.02 A	15.24 mm	Not Qualified		68 dB					e4	BREAK-BEFORE-MAKE			500 ns	1500 ohm	500 ns		37.4 mm
TPS2530DBVT	Texas Instruments	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			GULL WING			5 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		.95 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	COMMON OUTPUT	2	5.5 V	1.45 mm		3.9 mm				2.7 V				e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	2500000 ns	.116 ohm	1900000 ns		4.9 mm
SN74LV4053ANSR	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	3	3	CMOS	50 kHz	GULL WING			2.3 V	3.3	SMALL OUTLINE	SOP16,.3	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	2 mm	.05 A	5.3 mm	Not Qualified		45 dB	2 V		0 V		e4		30	260	28 ns	225 ohm	28 ns	2 ohm	10.2 mm	5.5 V
SN74LV4053APWTE4	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.02 mA	3	2	CMOS		GULL WING			2.3 V	2.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1	5.5 V	1.2 mm	.05 A	4.4 mm	Not Qualified		45 dB	2 V				e4		30	260	28 ns	180 ohm	28 ns	2 ohm	5 mm
TS3A5017RSV	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	VQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	2	4			NO LEAD			2.5 V	2.5/3.3	CHIP CARRIER, VERY THIN PROFILE	LCC16,.07X.1,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel		QUAD	R-PQCC-N16			3.6 V	.55 mm	.1 A	1.8 mm	Not Qualified		48 dB	2.3 V					MAKE-BEFORE-BREAK	NOT SPECIFIED	NOT SPECIFIED	10 ns	22 ohm	6 ns	1 ohm	2.6 mm
SN74HC4066DTG4	Texas Instruments	SPST	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING			4.5 V	2/6	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14		1	6 V	1.75 mm		3.905 mm	Not Qualified	NO	42 dB	2 V				e4	MAKE-BEFORE-BREAK	30	260	36 ns	85 ohm	40 ns		8.65 mm
SN74LV4052ANSRE4	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.02 mA	1	2	CMOS		GULL WING			2.5 V	3.3	SMALL OUTLINE	SOP16,.3	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1	5.5 V	2 mm	.05 A	5.3 mm	Not Qualified		45 dB	2 V				e4		30	260	35 ns	180 ohm	35 ns	1.5 ohm	10.2 mm
SN74LV4053ANSRE4	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.02 mA	3	2	CMOS		GULL WING			2.3 V	3.3	SMALL OUTLINE	SOP16,.3	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1	5.5 V	2 mm	.05 A	5.3 mm	Not Qualified		45 dB	2 V				e4		30	260	28 ns	180 ohm	28 ns	2 ohm	10.2 mm
MAX4594DCKR	Texas Instruments	SPST	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	1	CMOS	300 kHz	GULL WING			3 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5		1	3.6 V	1.1 mm		1.25 mm	Not Qualified	NO	80 dB	2.7 V		0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	45 ns	20 ohm	50 ns		2 mm	5.5 V

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.