Intersil Multiplexers & Switches 34

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length
CD4053BEX	Intersil	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.6 mA	3	2	CMOS	THROUGH-HOLE				5/15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T16					.01 A								e0	BREAK-BEFORE-MAKE			720 ns	1200 ohm
CD4051BEX	Intersil	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.6 mA	1	8	CMOS	THROUGH-HOLE				5/15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T16					.01 A								e0	BREAK-BEFORE-MAKE			720 ns	1200 ohm
HI1-5040-5	Intersil	SPST	COMMERCIAL	16	DIP	RECTANGULAR	NO	CERAMIC		1		CMOS	THROUGH-HOLE				5,+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T16							Not Qualified	NO					e0	BREAK-BEFORE-MAKE			1000 ns	75 ohm
CD22101F	Intersil	CROSS POINT SWITCH	MILITARY	24	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		1	1	CMOS	THROUGH-HOLE			5 V	5/15	IN-LINE	DIP24,.6	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-GDIP-T24	SEPARATE OUTPUT			5.72 mm		15.24 mm	Not Qualified		96 dB				e0				960 ns	600 ohm	850 ns	25 ohm
HI1-302-5	Intersil	DPST	COMMERCIAL	14	DIP	RECTANGULAR	NO	CERAMIC		2		CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel		DUAL	R-XDIP-T14	SEPARATE OUTPUT						Not Qualified	NO						BREAK-BEFORE-MAKE
ISL43142IRZ-T	Intersil	SPST	INDUSTRIAL	16	HVQCCN	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS	NO LEAD	-6 V	-5 V	5 V	3/12/+-5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N16		2	6 V	1 mm		3 mm	Not Qualified	NO/NC		2 V		-2 V	e3	BREAK-BEFORE-MAKE			80 ns	65 ohm	30 ns	2 ohm	3 mm
ISL43142IR	Intersil	SPST	INDUSTRIAL	16	HVQCCN	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS	NO LEAD	-6 V	-5 V	5 V	3/12/+-5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-N16		1	6 V	1 mm		3 mm	Not Qualified	NO/NC		2 V		-2 V	e0	BREAK-BEFORE-MAKE			80 ns	65 ohm	30 ns	2 ohm	3 mm
CD74HCT4066EX	Intersil	SPST	MILITARY	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4		CMOS	THROUGH-HOLE			5 V	5	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T14	SEPARATE OUTPUT							NO					e0	MAKE-BEFORE-BREAK			24 ns	142 ohm
CD4016BEX	Intersil	SPST	INDUSTRIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4		CMOS	THROUGH-HOLE				5/15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T14	SEPARATE OUTPUT							NO					e0				100 ns	2380 ohm
ISL43142IR-T	Intersil	SPST	INDUSTRIAL	16	HVQCCN	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS	NO LEAD	-6 V	-5 V	5 V	3/12/+-5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-N16		1	6 V	1 mm		3 mm	Not Qualified	NO/NC		2 V		-2 V	e0	BREAK-BEFORE-MAKE			80 ns	65 ohm	30 ns	2 ohm	3 mm
CD4067BEX	Intersil		MILITARY	24	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	3 mA	1	16	CMOS	THROUGH-HOLE				5/15	IN-LINE	DIP24,.6	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-PDIP-T24					.025 A								e0				650 ns	1300 ohm
CD22100D	Intersil	CROSS POINT SWITCH	MILITARY	16	DIP	RECTANGULAR	NO	CERAMIC		1		CMOS	THROUGH-HOLE				5/15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T16	SEPARATE OUTPUT						Not Qualified						e0				700 ns	1625 ohm
CD22100E	Intersil	CROSS POINT SWITCH	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	4	CMOS	THROUGH-HOLE			5 V	5/15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T16	SEPARATE OUTPUT		18 V	5.33 mm		7.62 mm	Not Qualified		80 dB	3 V			e0				220 ns	600 ohm	420 ns	25 ohm	19.17 mm
CD22100F	Intersil	CROSS POINT SWITCH	MILITARY	16	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		1	4	CMOS	THROUGH-HOLE			5 V	5/15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-GDIP-T16	SEPARATE OUTPUT		18 V	5.33 mm		7.62 mm	Not Qualified		80 dB	3 V			e0				220 ns	600 ohm	420 ns	25 ohm	9.585 mm
CD22100F3A	Intersil		MILITARY	16	DIP	RECTANGULAR	NO	CERAMIC		1		CMOS	THROUGH-HOLE				5/15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T16	SEPARATE OUTPUT						Not Qualified						e0				700 ns	1625 ohm
CD22100FX	Intersil	CROSS POINT SWITCH	MILITARY	16	DIP	RECTANGULAR	NO	CERAMIC		1		CMOS	THROUGH-HOLE				5/15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T16	SEPARATE OUTPUT												e0				700 ns	1625 ohm
CD22M3494MQA	Intersil	CROSS POINT SWITCH	INDUSTRIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	BIMOS	J BEND			5 V	4/15	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J44	SEPARATE OUTPUT	1	15 V	4.57 mm		16.585 mm	Not Qualified		95 dB	4 V	16 X 8 ARRAY		e0				100 ns	75 ohm	100 ns	6 ohm	16.585 mm
HI3-1818A-5	Intersil	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	1 mA	1	8	CMOS	THROUGH-HOLE				5,+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T16							Not Qualified						e0	BREAK-BEFORE-MAKE				500 ohm
DG182BA	Intersil	SPST	OTHER	10		ROUND	NO	METAL		2	1		WIRE		-15 V	15 V	+-15	CYLINDRICAL	CAN10,.23	Multiplexer or Switches		85 Cel	-20 Cel	TIN LEAD	BOTTOM	O-MBCY-W10	SEPARATE OUTPUT						Not Qualified	NC	50 dB				e0	BREAK-BEFORE-MAKE			300 ns	100 ohm	150 ns
DG406DY	Intersil	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	16	CMOS	GULL WING		-15 V	15 V		SMALL OUTLINE	SOP28,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G28		1		2.65 mm		7.5 mm	Not Qualified		69 dB		ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY		e0	BREAK-BEFORE-MAKE	30	240	200 ns	100 ohm	150 ns	5 ohm	17.9 mm
HI1-0507-2	Intersil	DIFFERENTIAL MULTIPLEXER	MILITARY	28	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED	3 mA	1	8	CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP28,.6	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-GDIP-T28				5.92 mm	.02 A	15.24 mm	Not Qualified		68 dB	10 V		-10 V	e0	BREAK-BEFORE-MAKE			500 ns	300 ohm	500 ns	9 ohm
IH5011CPE	Intersil	SPST	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1		THROUGH-HOLE			4.5 V		IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T16	SEPARATE OUTPUT			5.33 mm		7.62 mm	Not Qualified	NC					e0				500 ns	100 ohm	500 ns		19.17 mm
ISL84541CP	Intersil	SPST	COMMERCIAL	8	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		2	1	CMOS	THROUGH-HOLE			3.3 V	3.3/5	IN-LINE	DIP8,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T8	SEPARATE OUTPUT		12 V	5.33 mm		7.62 mm	Not Qualified	NO	76 dB	2.7 V			e0	BREAK-BEFORE-MAKE			120 ns	80 ohm	50 ns	.8 ohm	9.585 mm
CD22M3494E	Intersil	CROSS POINT SWITCH	INDUSTRIAL	40	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	16	BIMOS	THROUGH-HOLE			5 V	5/12,GND/-7	IN-LINE	DIP40,.6	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T40	SEPARATE OUTPUT		15 V	6.35 mm		15.24 mm	Not Qualified		95 dB	4 V	16 X 8 ARRAY		e0				100 ns	75 ohm	100 ns	6 ohm	51.75 mm
CD74HC22106E	Intersil	CROSS POINT SWITCH	INDUSTRIAL	28	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	8	CMOS	THROUGH-HOLE			4.5 V	5	IN-LINE	DIP28,.6	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T28	SEPARATE OUTPUT		10 V	6.35 mm		15.24 mm	Not Qualified			2 V			e0				240 ns	700 ohm		25 ohm	37.4 mm
DG125BP	Intersil	SPST	MILITARY	14	DIP	RECTANGULAR	NO	CERAMIC, METAL-SEALED COFIRED		1	1		THROUGH-HOLE		-20 V			IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-CDIP-T14	COMMON OUTPUT			5.08 mm		7.62 mm	Not Qualified	NC					e0	MAKE-BEFORE-BREAK			300 ns	200 ohm	1000 ns
HI1-307-5	Intersil	SPDT	COMMERCIAL	14	DIP	RECTANGULAR	NO	CERAMIC		2		CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel		DUAL	R-XDIP-T14	SEPARATE OUTPUT						Not Qualified							BREAK-BEFORE-MAKE
HI1-5046-7	Intersil		COMMERCIAL	16	DIP	RECTANGULAR	NO	CERAMIC		1		CMOS	THROUGH-HOLE				5,+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T16	SEPARATE OUTPUT												e0	BREAK-BEFORE-MAKE			1000 ns	75 ohm
HI1-5046A-7	Intersil		COMMERCIAL	16	DIP	RECTANGULAR	NO	CERAMIC		1		CMOS	THROUGH-HOLE				5,+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T16	SEPARATE OUTPUT												e0	BREAK-BEFORE-MAKE			1000 ns	50 ohm
HI1-518-5	Intersil		COMMERCIAL	18	DIP	RECTANGULAR	NO	CERAMIC	18 mA	1	8	CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP18,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel		DUAL	R-XDIP-T18							Not Qualified										175 ns	1000 ohm
HI3-516-5	Intersil		COMMERCIAL	28	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	30 mA	1	16	CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP28,.6	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel		DUAL	R-PDIP-T28							Not Qualified										175 ns	1000 ohm
HI9P0546-9	Intersil	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	2 mA	1	16	CMOS	GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP28,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G28		1		2.65 mm	.02 A	7.5 mm	Not Qualified		68 dB		OVERVOLTAGE PROTECTION		e0	BREAK-BEFORE-MAKE			1000 ns	1800 ohm	1000 ns	126 ohm	17.9 mm
ISL84541IP	Intersil	SPST	INDUSTRIAL	8	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		2	1	CMOS	THROUGH-HOLE			3.3 V	3.3/5	IN-LINE	DIP8,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T8	SEPARATE OUTPUT		12 V	5.33 mm		7.62 mm	Not Qualified	NO	76 dB	2.7 V			e0	BREAK-BEFORE-MAKE			120 ns	80 ohm	50 ns	.8 ohm	9.585 mm
ISL84543IP	Intersil	SPST	INDUSTRIAL	8	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		2	1	CMOS	THROUGH-HOLE			3.3 V	3.3/5	IN-LINE	DIP8,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T8	SEPARATE OUTPUT		12 V	5.33 mm		7.62 mm	Not Qualified	NO/NC	76 dB	2.7 V			e0	BREAK-BEFORE-MAKE			120 ns	80 ohm	50 ns	.8 ohm	9.585 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.