Part | RoHS | Manufacturer | Other IC type | Temperature Grade | No. of Terminals | Package Code | Package Shape | Surface Mount | Total Dose (V) | Maximum Switching Frequency | Package Body Material | Maximum Supply Current (Isup) | No. of Functions | No. of Channels | Technology | Screening Level | Nominal Bandwidth | Terminal Form | Maximum Negative Supply Voltage (Vsup) | Nominal Negative Supply Voltage (Vsup) | Nominal Supply Voltage (Vsup) | Power Supplies (V) | Package Style (Meter) | Package Equivalence Code | Sub-Category | Terminal Pitch | Maximum Operating Temperature | Control Mode | Minimum Operating Temperature | Terminal Finish | Terminal Position | JESD-30 Code | Output (V) | Moisture Sensitivity Level (MSL) | Maximum Supply Voltage (Vsup) | Maximum Seated Height | Maximum Signal Current | Height | Width (mm) | Qualification | Normal Position (V) | Nominal Off-state Isolation | Minimum Supply Voltage (Vsup) | Additional Features | Minimum Input Voltage | Minimum Negative Supply Voltage (Vsup) | JESD-609 Code | Switching (V) | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Maximum Switch-on Time | Maximum On-state Resistance (Ron) | Nominal Threshold Voltage (V) | Maximum Switch-off Time | Maximum Positive Input Voltage | Nominal On-state Resistance Match | Length | Adjustable Threshold | Maximum Input Voltage |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Texas Instruments |
SPST |
8 |
HVSON |
RECTANGULAR |
YES |
PLASTIC/EPOXY |
.042 mA |
1 |
1 |
SOI-CMOS |
NO LEAD |
-18 V |
-5 V |
5 V |
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE |
SOLCC8,.12,20 |
.5 mm |
125 Cel |
-40 Cel |
NICKEL PALLADIUM GOLD |
DUAL |
R-PDSO-N8 |
1 |
18 V |
.8 mm |
.45 A |
2 mm |
NC |
45 dB |
4.5 V |
-4.5 V |
e4 |
BREAK-BEFORE-MAKE |
260 |
240 ns |
4.9 ohm |
260 ns |
.8 ohm |
3 mm |
|||||||||||||||||||
|
Texas Instruments |
SPST |
8 |
HVSON |
RECTANGULAR |
YES |
PLASTIC/EPOXY |
.042 mA |
1 |
1 |
SOI-CMOS |
NO LEAD |
-18 V |
-5 V |
5 V |
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE |
SOLCC8,.12,20 |
.5 mm |
125 Cel |
-40 Cel |
NICKEL PALLADIUM GOLD |
DUAL |
R-PDSO-N8 |
1 |
18 V |
.8 mm |
.45 A |
2 mm |
NO |
45 dB |
4.5 V |
-4.5 V |
e4 |
BREAK-BEFORE-MAKE |
260 |
240 ns |
4.9 ohm |
260 ns |
.8 ohm |
3 mm |
|||||||||||||||||||
Texas Instruments |
SPST |
10 |
VSSOP |
SQUARE |
YES |
PLASTIC/EPOXY |
.065 mA |
1 |
2 |
CMOS |
GULL WING |
-18 V |
-5 V |
5 V |
SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH |
TSSOP10,.19,20 |
.5 mm |
125 Cel |
-40 Cel |
DUAL |
S-PDSO-G10 |
SEPARATE OUTPUT |
18 V |
1.1 mm |
3 mm |
NO |
50 dB |
4.5 V |
-4.5 V |
380 ns |
10 ohm |
350 ns |
.4 ohm |
3 mm |
|||||||||||||||||||||||||
Texas Instruments |
DIFFERENTIAL MULTIPLEXER |
16 |
TSSOP |
RECTANGULAR |
YES |
PLASTIC/EPOXY |
.08 mA |
2 |
2 |
CMOS |
AEC-Q100 |
500 kHz |
GULL WING |
-12 V |
-5 V |
5 V |
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
TSSOP16,.25 |
.65 mm |
125 Cel |
-55 Cel |
DUAL |
R-PDSO-G16 |
SEPARATE OUTPUT |
12 V |
1.2 mm |
.01 A |
4.4 mm |
NO |
95 dB |
BREAK-BEFORE-MAKE |
230 ns |
1300 ohm |
160 ns |
2 ohm |
5 mm |
|||||||||||||||||||||||
|
Texas Instruments |
SINGLE-ENDED MULTIPLEXER |
INDUSTRIAL |
16 |
TSSOP |
RECTANGULAR |
YES |
PLASTIC/EPOXY |
.01 mA |
2 |
2 |
165 kHz |
GULL WING |
2.5 V |
2.5/3.3 |
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
TSSOP16,.25 |
Multiplexer or Switches |
.65 mm |
85 Cel |
-40 Cel |
NICKEL PALLADIUM GOLD |
DUAL |
R-PDSO-G16 |
COMMON OUTPUT |
1 |
3.6 V |
1.2 mm |
.1 A |
4.4 mm |
Not Qualified |
NC |
48 dB |
2.3 V |
e4 |
BREAK-BEFORE-MAKE |
30 |
260 |
10 ns |
24 ohm |
6 ns |
1 ohm |
5 mm |
||||||||||||||||
|
Texas Instruments |
SPST |
INDUSTRIAL |
14 |
DIP |
RECTANGULAR |
NO |
PLASTIC/EPOXY |
.02 mA |
4 |
4 |
CMOS |
50 kHz |
THROUGH-HOLE |
2.3 V |
2/5.5 |
IN-LINE |
DIP14,.3 |
Multiplexer or Switches |
2.54 mm |
85 Cel |
-40 Cel |
NICKEL PALLADIUM GOLD |
DUAL |
R-PDIP-T14 |
SEPARATE OUTPUT |
5.5 V |
5.08 mm |
7.62 mm |
Not Qualified |
NO |
40 dB |
2 V |
e4 |
BREAK-BEFORE-MAKE |
25 ns |
225 ohm |
25 ns |
6 ohm |
19.305 mm |
|||||||||||||||||||
|
Texas Instruments |
SINGLE-ENDED MULTIPLEXER |
MILITARY |
16 |
SOP |
RECTANGULAR |
YES |
PLASTIC/EPOXY |
3 |
3 |
CMOS |
200 kHz |
GULL WING |
-6 V |
-4.5 V |
5 V |
5,GND/-5 |
SMALL OUTLINE |
SOP16,.25 |
Multiplexer or Switches |
1.27 mm |
125 Cel |
-55 Cel |
NICKEL PALLADIUM GOLD |
DUAL |
R-PDSO-G16 |
COMMON OUTPUT |
1 |
5 V |
1.58 mm |
.025 A |
3.91 mm |
Not Qualified |
NC |
64 dB |
4.5 V |
ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY |
0 V |
0 V |
e4 |
BREAK-BEFORE-MAKE |
30 |
260 |
34 ns |
270 ohm |
31 ns |
5 ohm |
9.9 mm |
5.5 V |
||||||||||
|
Texas Instruments |
SPST |
MILITARY |
14 |
SOP |
RECTANGULAR |
YES |
PLASTIC/EPOXY |
4 |
1 |
CMOS |
GULL WING |
10 V |
5/15 |
SMALL OUTLINE |
SSOP14,.25 |
Multiplexer or Switches |
1.27 mm |
125 Cel |
-55 Cel |
NICKEL PALLADIUM GOLD |
DUAL |
R-PDSO-G14 |
SEPARATE OUTPUT |
1 |
18 V |
1.75 mm |
3.9 mm |
Not Qualified |
NO |
50 dB |
3 V |
e4 |
30 |
260 |
40 ns |
2000 ohm |
10 ohm |
8.65 mm |
Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.
A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.
A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.
Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.