16 Power Management ICs 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	Trim or Adjustable Output (V)	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Control Mode	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Nominal Input Voltage	Additional Features	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Nominal Threshold Voltage (V)	Length	Adjustable Threshold	Maximum Input Voltage
UCC2917NG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	DIP	RECTANGULAR	NO		PLASTIC/EPOXY				1	1	BICMOS		THROUGH-HOLE					IN-LINE	DIP16,.3	Power Management Circuits	2.54 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDIP-T16			5.08 mm	7.62 mm	Not Qualified					e4					19.305 mm	YES
TPS2057D	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY				1	3			GULL WING		3.3 V			SMALL OUTLINE			1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	2.7 V				e4	30		260		9.9 mm	NO
BQ2058CSNXXXX	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	OTHER	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY				1	4			GULL WING					SMALL OUTLINE			1.27 mm	70 Cel			-30 Cel			DUAL	R-PDSO-G16		18 V	1.75 mm	3.9 mm	Not Qualified	4 V									9.9 mm	NO
TL7770-15CDW	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	COMMERCIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	6.5 mA			1	2	BIPOLAR		GULL WING		5 V	3.5/18		SMALL OUTLINE	SOP16,.4	Power Management Circuits	1.27 mm	70 Cel			0 Cel			DUAL	R-PDSO-G16		18 V	2.65 mm	7.5 mm	Not Qualified	3.5 V					NOT SPECIFIED		NOT SPECIFIED	+13.64V	10.3 mm	NO
TPS2306DWR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	4 mA			1	2			GULL WING		12 V	4/13.6		SMALL OUTLINE	SOP16,.4	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16		13.6 V	2.65 mm	7.5 mm	Not Qualified	4 V		UNDER VOLTAGE LOCKOUT		e4					10.3 mm	YES
BQ2003SG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	COMMERCIAL	16	SOP	RECTANGULAR	YES	300 kHz	PLASTIC/EPOXY	2.2 mA			1	1	CMOS		GULL WING	PULSE WIDTH MODULATION	5 V		BUCK	SMALL OUTLINE			1.27 mm	70 Cel			0 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	4.5 V	5 V		4.5 V	e4	30		260		10.3 mm	NO	5.5 V
TPS2211IDBREP	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY				1	2	BICMOS		GULL WING		3.3 V			SMALL OUTLINE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified	0 V		ALSO REQUIRES 5V AND 12V		e4					6.2 mm	NO
BQ2004HSNG4	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	16	SOP	RECTANGULAR	YES	300 kHz	PLASTIC/EPOXY				1		CMOS		GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE			1.27 mm	70 Cel		CURRENT-MODE	-20 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	1		1.75 mm	3.9 mm	Not Qualified		5 V		4.5 V	e4	30		260		9.9 mm		5.5 V
TL7770-5Y	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	COMMERCIAL	16	DIE	UNSPECIFIED	YES		UNSPECIFIED	5 mA			1	2			NO LEAD		5 V			UNCASED CHIP				70 Cel			0 Cel			UPPER	X-XUUC-N		18 V			Not Qualified	3.5 V		POWER ON RESET GENERATOR								NO
TPS2053ADG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	OTHER	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY				3				GULL WING					SMALL OUTLINE			1.27 mm					NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	1		1.75 mm	3.9 mm	Not Qualified					e4	30		260		9.9 mm
BQ2011JPN	Texas Instruments		COMMERCIAL	16	DIP	RECTANGULAR	NO		PLASTIC/EPOXY	.25 mA					CMOS		THROUGH-HOLE			3/6.5		IN-LINE	DIP16,.3	Power Management Circuits	2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T16					Not Qualified
UC2834NG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	DIP	RECTANGULAR	NO		PLASTIC/EPOXY				1	1	BIPOLAR		THROUGH-HOLE		15 V			IN-LINE			2.54 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDIP-T16		35 V	5.08 mm	7.62 mm	Not Qualified	5 V		UNDER AND OVER-VOLTAGE FAULT ALERT WITH PROGRAMMABLE DELAY		e4					19.305 mm	NO
TPS2043DRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.02 mA			1	3			GULL WING		3.3 V	3/5		SMALL OUTLINE	SOP16,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	1	5.5 V	1.75 mm	3.905 mm	Not Qualified	2.7 V				e4	30		260		9.9 mm	NO
TPS65562RGTT	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY		3 A		1				NO LEAD	PULSE WIDTH MODULATION			SINGLE	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		CURRENT-MODE	-35 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N16	2		1 mm	3 mm	Not Qualified		3 V		2.7 V	e4	30		260		3 mm		4 V
BQ2011SN-D118TRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	COMMERCIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY				1	1			GULL WING		4.25 V			SMALL OUTLINE			1.27 mm	70 Cel			0 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	2	6.5 V	1.75 mm	3.9 mm	Not Qualified	3 V				e4	30		260		9.9 mm	NO
UCC2919PWG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	1.5 mA			1	1	BICMOS		GULL WING		5 V	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Power Management Circuits	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	2	8 V	1.2 mm	4.4 mm	Not Qualified	3 V				e4	30		260		5 mm	YES
TPS65510RGTRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	OTHER	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	.35 mA			1	1			NO LEAD		3.6 V	3/5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Power Management Circuits	.5 mm	85 Cel			-35 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N16	2	5.5 V	1 mm	3 mm	Not Qualified	2.65 V				e4	30		260		3 mm	NO
BQ2202SN-N	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	6 mA			1	1	CMOS		GULL WING		5 V	5		SMALL OUTLINE	SOP16,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G16		5.5 V	1.778 mm	3.94 mm	Not Qualified	4.5 V					NOT SPECIFIED		NOT SPECIFIED		9.9695 mm	YES
TPS2048AD	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	OTHER	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY				1	4			GULL WING		3.3 V			SMALL OUTLINE			1.27 mm	85 Cel			0 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	2.7 V				e4	30		260		9.9 mm	NO
BQ2058TSNXXXX	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	OTHER	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY				1	2			GULL WING					SMALL OUTLINE			1.27 mm	70 Cel			-30 Cel			DUAL	R-PDSO-G16		9 V	1.75 mm	3.9 mm	Not Qualified	4 V									9.9 mm	NO
BQ2212SN	Texas Instruments		COMMERCIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	6 mA					CMOS		GULL WING		5 V	5		SMALL OUTLINE	SOP16,.25	Power Management Circuits	1.27 mm	70 Cel			0 Cel			DUAL	R-PDSO-G16					Not Qualified
5962-8774201VEA	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	MILITARY	16	DIP	RECTANGULAR	NO		CERAMIC, GLASS-SEALED		.4 A	NO	1	1	BIPOLAR	MIL-PRF-38535 Class V	THROUGH-HOLE		15 V			IN-LINE			2.54 mm	125 Cel	1.485 V		-55 Cel	TIN LEAD	1.515 V	DUAL	R-GDIP-T16		35 V	5.08 mm	7.62 mm	Qualified	5 V		UNDER AND OVER-VOLTAGE FAULT ALERT WITH PROGRAMMABLE DELAY		e0		1		+0.15V	19.56 mm	YES
BQ2050PN-N	Texas Instruments		INDUSTRIAL	16	DIP	RECTANGULAR	NO		PLASTIC/EPOXY	.25 mA					CMOS		THROUGH-HOLE			2.5/6.5		IN-LINE	DIP16,.3	Power Management Circuits	2.54 mm	85 Cel			-40 Cel			DUAL	R-PDIP-T16					Not Qualified
TL7770-12MJB	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	MILITARY	16	DIP	RECTANGULAR	NO		CERAMIC, GLASS-SEALED	6.5 mA			1	2	BIPOLAR		THROUGH-HOLE		5 V	3.5/18		IN-LINE	DIP16,.3	Power Management Circuits	2.54 mm	125 Cel			-55 Cel			DUAL	R-GDIP-T16		18 V	5.08 mm	7.62 mm	Not Qualified	3.5 V		POWER ON RESET GENERATOR			NOT SPECIFIED		NOT SPECIFIED	+10.9V		NO
TPS2549IRTETQ1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY				1	1			NO LEAD		5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	S-PQCC-N16	2	6.5 V	.8 mm	3 mm		4.5 V				e4	30		260		3 mm	YES
TPS657095YFFT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	VFBGA	SQUARE	YES		UNSPECIFIED		.1 A		1	1			BALL		5 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel			-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)		BOTTOM	S-XBGA-B16	1	6 V	.625 mm	1.688 mm		3.7 V				e1	30	2	260		1.688 mm	NO
TL7770-5CDWE4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	COMMERCIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	6.5 mA			1	2	BIPOLAR		GULL WING		5 V	3.5/18		SMALL OUTLINE	SOP16,.4	Power Management Circuits	1.27 mm	70 Cel			0 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	1	18 V	2.65 mm	7.5 mm	Not Qualified	3.5 V		POWER ON RESET GENERATOR		e4	30		260	+4.55V	10.3 mm	NO
BQ2054SNG4	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	16	SOP	RECTANGULAR	YES	100 kHz	PLASTIC/EPOXY		.005 A		1				GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE			1.27 mm	70 Cel		CURRENT/VOLTAGE-MODE	-20 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	1		1.78 mm	3.935 mm	Not Qualified		5 V		4.5 V	e4	30		260		9.97 mm		5.5 V
TL7770-15Y	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	COMMERCIAL	16	DIE	UNSPECIFIED	YES		UNSPECIFIED	5 mA			1	2			NO LEAD					UNCASED CHIP				70 Cel			0 Cel			UPPER	X-XUUC-N16		18 V			Not Qualified	3.5 V										NO
TL7770-12QDWR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	6.5 mA			1	2			GULL WING		5 V			SMALL OUTLINE			1.27 mm	125 Cel			-40 Cel			DUAL	R-PDSO-G16		18 V	2.65 mm	7.5 mm	Not Qualified	3.5 V									10.3 mm	NO
TL7780-15DR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY				2	1			GULL WING		5 V			SMALL OUTLINE			1.27 mm	125 Cel			-40 Cel			DUAL	R-PDSO-G16		18 V	1.75 mm	3.9 mm	Not Qualified	3.5 V									9.9 mm	NO
BQ2011KSN-D121TR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	COMMERCIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY				1	1			GULL WING		4.25 V			SMALL OUTLINE			1.27 mm	70 Cel			0 Cel	TIN LEAD		DUAL	R-PDSO-G16	1	6.5 V	1.75 mm	3.9 mm	Not Qualified	3 V				e0					9.9 mm	NO
TPS2057DR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY				1	3			GULL WING		3.3 V			SMALL OUTLINE			1.27 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	2.7 V				e4	30		260		9.9 mm	NO
TPS2054AD	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	OTHER	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY				1	4			GULL WING		3.3 V			SMALL OUTLINE			1.27 mm	85 Cel			0 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	2.7 V				e4	30		260		9.9 mm	NO
BQ2011SNN	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.25 mA			1	1	CMOS		GULL WING		4.25 V	3/6.5		SMALL OUTLINE	SOP16,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G16		6.5 V	1.75 mm	3.9 mm	Not Qualified	3 V									9.9 mm	NO
BQ2058WSN	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	OTHER	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY				1	4			GULL WING					SMALL OUTLINE			1.27 mm	70 Cel			-30 Cel			DUAL	R-PDSO-G16		18 V	1.75 mm	3.9 mm	Not Qualified	4 V									9.9 mm	NO
BQ2010SN-D107TR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	COMMERCIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY				1	1			GULL WING		4.25 V			SMALL OUTLINE			1.27 mm	70 Cel			0 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	2	6.5 V	1.75 mm	3.9 mm	Not Qualified	3 V				e4	30		260		9.9 mm	YES
TPS2320ID	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	1 mA	500 A		1	2			GULL WING		4.5 V	3.3/5,3/13		SMALL OUTLINE	SOP16,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	1	13 V	1.75 mm	3.9 mm	Not Qualified	3 V		REQUIRES 3V TO 5.5V SUPPLY FOR CHANNEL 2		e4	30		260		9.9 mm	YES
UC2910DTR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	OTHER	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY				1	1			GULL WING		12 V			SMALL OUTLINE			1.27 mm	85 Cel			-25 Cel			DUAL	R-PDSO-G16		13.2 V	1.75 mm	3.9 mm	Not Qualified	10.8 V					NOT SPECIFIED		NOT SPECIFIED		9.9 mm	YES
TPS7B6350QPWPRQ1	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE	16	HTSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.098 mA	.3 A	NO	1	1			GULL WING		14 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	125 Cel	3.3 V		-40 Cel	NICKEL PALLADIUM GOLD	5 V	DUAL	R-PDSO-G16	3	40 V	1.2 mm	4.4 mm		4 V				e4	30	1	260		5 mm	YES
TPS2047ADR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	OTHER	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY				1	3			GULL WING		3.3 V			SMALL OUTLINE			1.27 mm	85 Cel			0 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	2.7 V				e4	30		260		9.9 mm	NO
TL7770-5CN	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	COMMERCIAL	16	DIP	RECTANGULAR	NO		PLASTIC/EPOXY	6.5 mA			1	2	BIPOLAR		THROUGH-HOLE		5 V	3.5/18		IN-LINE	DIP16,.3	Power Management Circuits	2.54 mm	70 Cel			0 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDIP-T16		18 V	5.08 mm	7.62 mm	Not Qualified	3.5 V		POWER ON RESET GENERATOR		e4				4.55	19.305 mm	NO
TL7780-12QN	Texas Instruments		AUTOMOTIVE	16	DIP	RECTANGULAR	NO		PLASTIC/EPOXY	6.5 mA					BIPOLAR		THROUGH-HOLE			3.5/18		IN-LINE	DIP16,.3	Power Management Circuits	2.54 mm	125 Cel			-40 Cel			DUAL	R-PDIP-T16					Not Qualified						NOT SPECIFIED		NOT SPECIFIED	+10.9V		NO
TPS2320IDR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	1 mA	500 A		1	2			GULL WING		4.5 V	3.3/5,3/13		SMALL OUTLINE	SOP16,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	1	13 V	1.75 mm	3.9 mm	Not Qualified	3 V		REQUIRES 3V TO 5.5V SUPPLY FOR CHANNEL 2		e4	30		260		9.9 mm	YES
TPS2043ADR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	OTHER	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY				1	3			GULL WING		3.3 V			SMALL OUTLINE			1.27 mm	85 Cel			0 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	2.7 V				e4	30		260		9.9 mm	NO
TL7770-5MJ	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	MILITARY	16	DIP	RECTANGULAR	NO		CERAMIC, GLASS-SEALED	6.5 mA			1	2			THROUGH-HOLE		5 V			IN-LINE			2.54 mm	125 Cel			-55 Cel			DUAL	R-GDIP-T16		18 V	5.08 mm	7.62 mm	Not Qualified	3.5 V									19.56 mm	NO
LM3621M	Texas Instruments	BATTERY CHARGE CONTROLLER	COMMERCIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY				1				GULL WING				BOOST	SMALL OUTLINE			1.27 mm	70 Cel		CURRENT/VOLTAGE-MODE	0 Cel			DUAL	R-PDSO-G16			1.75 mm	3.899 mm			4.2 V	ALSO AVAILABLE 4.2 OR 4.1V SELECTABLE OUTPUT VOLTAGE	3 V						9.902 mm		5.5 V
TPS65562RGT	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY				1				NO LEAD	PULSE WIDTH MODULATION			SINGLE	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		CURRENT-MODE	-35 Cel			QUAD	S-PQCC-N16			1 mm	3 mm	Not Qualified		3 V		2.7 V						3 mm		4 V

Power Management ICs

Power Management ICs (PMICs) are electronic components that are used to regulate and manage the power supply in electronic systems. They are used to optimize power usage, reduce power consumption, and increase battery life in portable devices.

PMICs typically include a range of components such as voltage regulators, power switches, and battery management circuits. Voltage regulators are used to maintain a stable voltage output despite fluctuations in the input voltage or load. Power switches are used to control the flow of power in a circuit, and battery management circuits are used to monitor and manage the charging and discharging of batteries.

PMICs are used in a wide range of applications, including mobile phones, laptops, tablets, and other portable devices. They are also used in automotive electronics, power supplies, and industrial automation systems. PMICs play a critical role in managing power consumption in electronic systems, reducing energy waste and extending battery life.

One of the key advantages of PMICs is their ability to provide multiple functions in a single package, reducing the number of components needed in a system and simplifying design. They also help to improve system reliability by protecting against overvoltage, overcurrent, and overtemperature conditions.