28 Power Management ICs 809

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Terminal Form	Control Technique	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Control Mode	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Nominal Input Voltage	Additional Features	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Adjustable Threshold	Maximum Input Voltage
MAX5916UUI+T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	OTHER	28	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	5 mA	1	3	BICMOS	GULL WING		-12 V	12 V	+-12		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Power Management Circuits	.65 mm	85 Cel		0 Cel	MATTE TIN	DUAL	R-PDSO-G28	1	13.2 V	1.1 mm	4.4 mm	Not Qualified	10.8 V				e3			9.7 mm	YES
MAX1645AEEI	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	28	SOP	RECTANGULAR	YES	400 kHz	PLASTIC/EPOXY		1			GULL WING	CONSTANT OFF TIME				BOOST	SMALL OUTLINE			.635 mm	85 Cel	CURRENT-MODE	-40 Cel	TIN LEAD	DUAL	R-PDSO-G28	1		1.75 mm	3.9 mm	Not Qualified		18 V		8 V	e0		245	9.89 mm		28 V
MAX1601EAI+	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	28	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.1 mA	1	2		GULL WING			3.3 V			SMALL OUTLINE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G28	1	5.5 V	1.99 mm	5.29 mm	Not Qualified	3 V				e3	30	260	10.2 mm	NO
DS1212	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	COMMERCIAL	28	DIP	RECTANGULAR	NO		PLASTIC/EPOXY	80 mA	1	3	CMOS	THROUGH-HOLE			5 V	5		IN-LINE	DIP28,.6	Power Management Circuits	2.54 mm	70 Cel		0 Cel	TIN LEAD	DUAL	R-PDIP-T28	1	5.5 V	5.08 mm	15.24 mm	Not Qualified	4.5 V				e0			36.83 mm	NO
MAX1601EAI+T	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	28	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.1 mA	1	2		GULL WING			3.3 V			SMALL OUTLINE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G28	1	5.5 V	1.99 mm	5.29 mm	Not Qualified	3 V				e3			10.2 mm	NO
MAX1600EAI	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	28	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.15 mA	1	2		GULL WING			3.3 V	3.3/12		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Power Management Circuits	.65 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G28	1	5.5 V	1.99 mm	5.29 mm	Not Qualified	3 V				e0			10.2 mm	NO
MAX5915AEUI	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	28	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	5 mA	1	3	BICMOS	GULL WING			12 V	3.3,5,+-12		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Power Management Circuits	.65 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G28	1	13.2 V	1.1 mm	4.4 mm	Not Qualified	10.8 V				e0		245	9.7 mm	YES
DS1874T+T&R	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	28	HVQCCN	SQUARE	YES		UNSPECIFIED		1	1		NO LEAD						CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	95 Cel		-40 Cel	MATTE TIN	QUAD	S-XQCC-N28	1	3.9 V	.8 mm	5 mm	Not Qualified	2.85 V				e3	30	260	5 mm	YES
DS1262	Maxim Integrated		COMMERCIAL	28	DIP	RECTANGULAR	NO		PLASTIC/EPOXY	100 mA				THROUGH-HOLE			5 V	5		IN-LINE	DIP28,.6	Power Management Circuits	2.54 mm	70 Cel		0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T28					Not Qualified					e0
MAX1601C/D	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	COMMERCIAL	28	DIE	RECTANGULAR	YES		UNSPECIFIED	.3 mA	1	2		NO LEAD			3.3 V	3.3/12		UNCASED CHIP	DIE OR CHIP	Power Management Circuits		70 Cel		0 Cel	TIN LEAD	UPPER	R-XUUC-N28		5.5 V			Not Qualified	3 V				e0				NO
MAX1604EAI+	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	28	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.1 mA	1	2		GULL WING						SMALL OUTLINE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G28	1	5.5 V	1.99 mm	5.29 mm	Not Qualified	3 V				e3	30	260	10.2 mm	NO
DS2790E+	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	OTHER	28	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	3.3 mA	1	1		GULL WING			3.7 V	3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Power Management Circuits	.65 mm	70 Cel		-20 Cel	MATTE TIN	DUAL	R-PDSO-G28	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	2.5 V				e3			9.7 mm	YES
MAX8731ETI+T	Maxim Integrated		INDUSTRIAL	28	QCCN	SQUARE	YES		PLASTIC/EPOXY				BICMOS	NO LEAD			3.3 V	3.3		CHIP CARRIER	LCC28,.2SQ,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	Matte Tin (Sn)	QUAD	S-PQCC-N28					Not Qualified					e3
MAX5915AEUI+T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	28	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	5 mA	1	3	BICMOS	GULL WING		-12 V	12 V	+-12		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Power Management Circuits	.65 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G28	1	13.2 V	1.1 mm	4.4 mm	Not Qualified	10.8 V				e3			9.7 mm	YES
MAX1645AEEI+T	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	28	SSOP	RECTANGULAR	YES	400 kHz	PLASTIC/EPOXY		1			GULL WING	CONSTANT OFF TIME				BOOST	SMALL OUTLINE, SHRINK PITCH			.635 mm	85 Cel	CURRENT-MODE	-40 Cel	MATTE TIN	DUAL	R-PDSO-G28	1		1.75 mm	3.9 mm	Not Qualified		18 V		8 V	e3	30	260	9.89 mm		28 V
DS2790E+T&R	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	OTHER	28	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	3.3 mA	1	1		GULL WING			3.7 V	3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Power Management Circuits	.65 mm	70 Cel		-20 Cel	MATTE TIN	DUAL	R-PDSO-G28	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	2.5 V				e3			9.7 mm	YES
MAX1604EAI	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	28	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.1 mA	1	2		GULL WING						SMALL OUTLINE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G28	1	5.5 V	1.99 mm	5.29 mm	Not Qualified	3 V				e0		245	10.2 mm	NO
MAX5915AUUI+	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	OTHER	28	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	5 mA	1	3	BICMOS	GULL WING		-12 V	12 V	+-12		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Power Management Circuits	.65 mm	85 Cel		0 Cel	MATTE TIN	DUAL	R-PDSO-G28	1	13.2 V	1.1 mm	4.4 mm	Not Qualified	10.8 V				e3	30	260	9.7 mm	YES
DS1213C/H	Maxim Integrated		COMMERCIAL	28	DIP	RECTANGULAR	NO		PLASTIC/EPOXY				CMOS	THROUGH-HOLE						IN-LINE	DIP28,.6	Power Management Circuits	2.54 mm	70 Cel		0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T28					Not Qualified					e0
MAX1600EAI+T	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	28	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.15 mA	1	2		GULL WING			3.3 V	3.3/12		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Power Management Circuits	.65 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G28	1	5.5 V	1.99 mm	5.29 mm	Not Qualified	3 V				e3	30	260	10.2 mm	NO
MAX5916AUUI+T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	OTHER	28	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY		1	3	BICMOS	GULL WING			12 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel		0 Cel	MATTE TIN	DUAL	R-PDSO-G28	1	13.2 V	1.1 mm	4.4 mm	Not Qualified	10.8 V				e3			9.7 mm	YES
MAX5984DETI+T	Maxim Integrated		INDUSTRIAL	28	QCCN	SQUARE	YES		PLASTIC/EPOXY	4 mA			BICMOS	NO LEAD				32/60		CHIP CARRIER	LCC28,.2SQ,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel		QUAD	S-PQCC-N28					Not Qualified
MAX1645AEEI+	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	28	SSOP	RECTANGULAR	YES	400 kHz	PLASTIC/EPOXY		1			GULL WING	CONSTANT OFF TIME				BOOST	SMALL OUTLINE, SHRINK PITCH			.635 mm	85 Cel	CURRENT-MODE	-40 Cel	MATTE TIN	DUAL	R-PDSO-G28	1		1.75 mm	3.9 mm	Not Qualified		18 V		8 V	e3	30	260	9.89 mm		28 V
MAX5916EUI	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	28	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	5 mA	1	3	BICMOS	GULL WING			12 V	3.3,5,+-12		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Power Management Circuits	.65 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G28	1	13.2 V	1.1 mm	4.4 mm	Not Qualified	10.8 V				e0		245	9.7 mm	YES
MAX6894ETI	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	28	VQCCN	SQUARE	YES		UNSPECIFIED	1.1 mA	1	4	BICMOS	NO LEAD				3/5		CHIP CARRIER, VERY THIN PROFILE	LCC28,.2SQ,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	TIN LEAD	QUAD	S-XQCC-N28	1	5.5 V	.8 mm	5 mm	Not Qualified	2.7 V		MANUAL RESET INPUT		e0			5 mm	YES
MAX6890ETI-T	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	28	HVQCCN	SQUARE	YES		PLASTIC/EPOXY		1	6	BICMOS	NO LEAD				3/5,6.5/13		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	TIN LEAD	QUAD	S-PQCC-N28		5.5 V	.8 mm	5 mm	Not Qualified	2.7 V				e0			5 mm	YES
MAX1600EAI-T	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	28	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.15 mA	1	2		GULL WING			3.3 V	3.3/12		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Power Management Circuits	.65 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G28	1	5.5 V	1.99 mm	5.29 mm	Not Qualified	3 V				e0			10.2 mm	NO
DS1212N	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	28	DIP	RECTANGULAR	NO		PLASTIC/EPOXY	80 mA	1	3	CMOS	THROUGH-HOLE			5 V	5		IN-LINE	DIP28,.6	Power Management Circuits	2.54 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDIP-T28	1	5.5 V	5.08 mm	15.24 mm	Not Qualified	4.5 V				e0			36.83 mm	NO
DS2790G+T&R	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	OTHER	28	HVSON	RECTANGULAR	YES		UNSPECIFIED	3.3 mA	1	1		NO LEAD			3.7 V	3/5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC28,.16,20	Power Management Circuits	.5 mm	70 Cel		-20 Cel	MATTE TIN	DUAL	R-XDSO-N28		5.5 V	.8 mm	4 mm	Not Qualified	2.5 V				e3			8 mm	YES
MAX1603EAI-T	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	28	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.15 mA	1	2		GULL WING						SMALL OUTLINE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G28	1	5.5 V	1.99 mm	5.29 mm	Not Qualified	3 V				e0			10.2 mm	NO
DS1212+	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	COMMERCIAL	28	DIP	RECTANGULAR	NO		PLASTIC/EPOXY	80 mA	1	3	CMOS	THROUGH-HOLE			5 V	5		IN-LINE	DIP28,.6	Power Management Circuits	2.54 mm	70 Cel		0 Cel	MATTE TIN	DUAL	R-PDIP-T28	1	5.5 V	5.08 mm	15.24 mm	Not Qualified	4.5 V				e3	30	260	36.83 mm	NO
MAX1600C/D	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	COMMERCIAL	28	DIE	RECTANGULAR	YES		UNSPECIFIED	.3 mA	1	2		NO LEAD			3.3 V			UNCASED CHIP				70 Cel		0 Cel	TIN LEAD	UPPER	R-XUUC-N28		5.5 V			Not Qualified	3 V				e0				NO
MAX1603EAI+TW	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	28	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY		1	2		GULL WING			3.3 V			SMALL OUTLINE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G28		5.5 V	1.99 mm	5.29 mm		3 V					NOT SPECIFIED	NOT SPECIFIED	10.2 mm	NO
MAX1604EAI-T	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	28	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.1 mA	1	2		GULL WING						SMALL OUTLINE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G28	1	5.5 V	1.99 mm	5.29 mm	Not Qualified	3 V				e0			10.2 mm	NO
MAX1603EAI+W	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	28	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY		1	2		GULL WING			3.3 V			SMALL OUTLINE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G28	1	5.5 V	1.99 mm	5.29 mm		3 V				e3	30	260	10.2 mm	NO
MAX1645EEI	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	28	SOP	RECTANGULAR	YES	400 kHz	PLASTIC/EPOXY		1			GULL WING	CONSTANT OFF TIME				BOOST	SMALL OUTLINE			.635 mm	85 Cel	CURRENT-MODE	-40 Cel	TIN LEAD	DUAL	R-PDSO-G28	1		1.75 mm	3.9 mm	Not Qualified		18 V		8 V	e0		245	9.89 mm		28 V
MAX5984CETI+	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	28	HVQCCN	SQUARE	YES		UNSPECIFIED	4 mA	1	1	BICMOS	NO LEAD			54 V	32/60		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel		QUAD	S-XQCC-N28		60 V	.8 mm	5 mm	Not Qualified	32 V					NOT SPECIFIED	NOT SPECIFIED	5 mm	NO
MAX716CPI	Maxim Integrated		COMMERCIAL	28	DIP	RECTANGULAR	NO		PLASTIC/EPOXY				BIPOLAR	THROUGH-HOLE						IN-LINE	DIP28,.3	Power Management Circuits	2.54 mm	70 Cel		0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T28										e0
MAX5922BEUI-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	28	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	1.6 mA	1	1	BICMOS	GULL WING			48 V	48		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Power Management Circuits	.65 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G28	1	60 V	1.1 mm	4.4 mm	Not Qualified	32 V				e0			9.7 mm	YES
MAX1603EAI+	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	28	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.15 mA	1	2		GULL WING						SMALL OUTLINE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G28	1	5.5 V	1.99 mm	5.29 mm	Not Qualified	3 V				e3	30	260	10.2 mm	NO
MAX8730ETI+T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	28	HVQCCN	SQUARE	YES		UNSPECIFIED	6 mA	1	1	BICMOS	NO LEAD			18 V	8/28		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	MATTE TIN	QUAD	S-XQCC-N28	1	28 V	.8 mm	5 mm	Not Qualified	8 V				e3	30	260	5 mm	YES
MAX8903NETI+	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	28	HVQCCN	SQUARE	YES		UNSPECIFIED		1	1	BICMOS	NO LEAD			5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel		-40 Cel	MATTE TIN	QUAD	S-XQCC-N28	1	16 V	.8 mm	4 mm		4.15 V				e3	30	260	4 mm	YES
MAX847EEI-T	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	28	HSSOP	RECTANGULAR	YES		PLASTIC/EPOXY		1	1		GULL WING			1.2 V			SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH			.635 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G28	1	3.9 V	1.73 mm	3.9 mm	Not Qualified	.8 V				e0			9.89 mm	YES
MAX5916AEUI-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	28	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY		1	3	BICMOS	GULL WING			12 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G28	1	13.2 V	1.1 mm	4.4 mm	Not Qualified	10.8 V				e0			9.7 mm	YES
MAX5916AEUI+T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	28	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	5 mA	1	3	BICMOS	GULL WING		-12 V	12 V	+-12		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Power Management Circuits	.65 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G28	1	13.2 V	1.1 mm	4.4 mm	Not Qualified	10.8 V				e3			9.7 mm	YES
MAX16068ETI+T	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	28	HVQCCN	SQUARE	YES		UNSPECIFIED		1	6	BICMOS	NO LEAD			3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel		QUAD	S-XQCC-N28	1	14 V	.8 mm	5 mm		2.8 V					30	260	5 mm	YES
MAX8725ETI-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	28	HVQCCN	SQUARE	YES		UNSPECIFIED		1	2	BICMOS	NO LEAD			18 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	TIN LEAD	QUAD	S-XQCC-N28	1	28 V	.8 mm	5 mm	Not Qualified	8 V				e0			5 mm	YES
MAX8765AETI+T	Maxim Integrated		INDUSTRIAL	28	QCCN	SQUARE	YES		PLASTIC/EPOXY	6 mA			BICMOS	NO LEAD			18 V	18		CHIP CARRIER	LCC28,.2SQ,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	MATTE TIN	QUAD	S-PQCC-N28	1				Not Qualified					e3	30	260

Power Management ICs

Power Management ICs (PMICs) are electronic components that are used to regulate and manage the power supply in electronic systems. They are used to optimize power usage, reduce power consumption, and increase battery life in portable devices.

PMICs typically include a range of components such as voltage regulators, power switches, and battery management circuits. Voltage regulators are used to maintain a stable voltage output despite fluctuations in the input voltage or load. Power switches are used to control the flow of power in a circuit, and battery management circuits are used to monitor and manage the charging and discharging of batteries.

PMICs are used in a wide range of applications, including mobile phones, laptops, tablets, and other portable devices. They are also used in automotive electronics, power supplies, and industrial automation systems. PMICs play a critical role in managing power consumption in electronic systems, reducing energy waste and extending battery life.

One of the key advantages of PMICs is their ability to provide multiple functions in a single package, reducing the number of components needed in a system and simplifying design. They also help to improve system reliability by protecting against overvoltage, overcurrent, and overtemperature conditions.