SQUARE Power Management ICs 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Nominal Threshold Voltage (V)	Length	Adjustable Threshold	Maximum Input Voltage
TPS3619-33DGKG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY	.04 mA		1	1	CMOS		GULL WING		3.3 V	1.8/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	1.65 V	MANUAL RESET; POWER ON RESET GENERATOR; VOLTAGE MONITOR FOR POWER-FAIL OR LOW-BATTERY MONITORING		e4	30		260	+2.93V	3 mm	NO
BQ24075QRGTRQ1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	1.5 mA		1	1			NO LEAD		5 V	4.5/6.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Power Management Circuits	.5 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N16	3	6.4 V	1 mm	3 mm	Not Qualified	4.35 V	ALSO OPERATES WITH BUS VOLT OF 4.35V TO 6.4V		e4	30		260	+6.6V	3 mm	YES
LTC4367CDD#PBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	COMMERCIAL	8	HVSON	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD		5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	70 Cel		0 Cel	MATTE TIN		DUAL	S-PDSO-N8		60 V	.8 mm	3 mm		2.5 V			e3					3 mm	YES
LTC4367HDD-1#PBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	8	HVSON	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD		5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel		-40 Cel	MATTE TIN		DUAL	S-PDSO-N8		60 V	.8 mm	3 mm		2.5 V			e3					3 mm	YES
MCP73871-2AAI/ML	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	20	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	3.75 mA		1	1			NO LEAD		5.2 V	5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed		QUAD	S-PQCC-N20	1	6 V	1 mm	4 mm	Not Qualified	4.479 V			e3	40		260	+4.2V	4 mm	YES
PAC1954T-E/4MX	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT		16	QCCN	SQUARE	YES		UNSPECIFIED	.495 mA		1	4			NO LEAD		3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel		-40 Cel			QUAD	S-PQCC-N16		5.5 V	.9 mm	3 mm		2.7 V								3 mm	YES
MIC2025-2YMM-TR	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY	.16 mA		1	1		TS 16949	GULL WING		5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP8,.19,26		.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-G8	2	5.5 V	1.1 mm	3 mm	Not Qualified	2.7 V	Undervoltage Lockout threshold is 2.3 for vin falling		e4			260	+2.5V, +2.3V	3 mm	NO
INA238AQDGSRQ1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	10	TSSOP	SQUARE	YES		PLASTIC/EPOXY			1	1		AEC-Q100	GULL WING		3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20		.5 mm	125 Cel		-40 Cel	MATTE TIN		DUAL	S-PDSO-G10	2	5.5 V	1.1 mm	3 mm		2.7 V			e3	30		260	+52V	3 mm	YES
LTC4151IMS#PBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	TSSOP	SQUARE	YES		PLASTIC/EPOXY			1	1	CMOS		GULL WING		48 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.5 mm	85 Cel		-40 Cel	MATTE TIN		DUAL	S-PDSO-G10	1	80 V	1.1 mm	3 mm	Not Qualified	7 V			e3	30		260		3 mm	NO
STC3100IST	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY	.1 mA		1	1			GULL WING		3.6 V	2.7/4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	2.7 V			e4	30		260		3 mm	NO
BQ7695204PFBR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	48	TFQFP	SQUARE	YES		PLASTIC/EPOXY			1	16			GULL WING		59.2 V			FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ		.5 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQFP-G48	2	80 V	1.2 mm	7 mm		4.7 V			e4	30		260		7 mm	YES
PBQ76952PFBT	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	48	TFQFP	SQUARE	YES		PLASTIC/EPOXY			1	2			GULL WING		59.2 V			FLATPACK, THIN PROFILE, FINE PITCH			.5 mm	85 Cel		-40 Cel			QUAD	S-PQFP-G48		80 V	1.2 mm	7 mm		4.7 V								7 mm	YES
TPS386596L33DGKR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY	.022 mA		1	4			GULL WING		3.3 V	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-G8	2	6.5 V	1.1 mm	3 mm	Not Qualified	1.8 V			e4	30		260	2.9	3 mm	YES
MCP39F511N-E/MQ	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	28	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	2		TS 16949	NO LEAD					CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20		.5 mm	125 Cel		-40 Cel	MATTE TIN		QUAD	S-PQCC-N28		3.6 V	1 mm	5 mm		2.7 V			e3					5 mm	YES
LTC4357MPMS8#PBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	MILITARY	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY			1	1	CMOS		GULL WING		20 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	125 Cel		-55 Cel	MATTE TIN		DUAL	S-PDSO-G8	1	80 V	1.1 mm	3 mm	Not Qualified	9 V			e3	30		260		3 mm	NO
BQ25505RGRT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	20	HVQCCN	SQUARE	YES	1000 kHz	PLASTIC/EPOXY			1	1			NO LEAD	PULSE FREQUENCY MODULATION			BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N20	1	5.1 V	1 mm	3.5 mm		.6 V		.1 V	e4	30		260		3.5 mm	YES	5.1 V
LT4356IMS-1#TRPBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	TSSOP	SQUARE	YES		PLASTIC/EPOXY			1	1	CMOS		GULL WING		12 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.5 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed		DUAL	S-PDSO-G10	1	80 V	1.1 mm	3 mm	Not Qualified	4 V			e3	30		260		3 mm	YES
LM5060QDGSRQ1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	10	TSSOP	SQUARE	YES		PLASTIC/EPOXY		500 A	1	1			GULL WING		14 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.5 mm	125 Cel		-40 Cel	MATTE TIN		DUAL	S-PDSO-G10	1	65 V	1.1 mm	3 mm		5.5 V			e3	30		260		3 mm	YES
PD69208MILQ-TR-LE	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	56	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	8			NO LEAD		55 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC56,.31SQ,20		.5 mm	85 Cel		-40 Cel			QUAD	S-PQCC-N56	3	57 V	1 mm	8 mm		44 V				40		260	+8V	8 mm	NO
UCD90160ARGCT	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE	64	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD		3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N64	3	3.6 V	1 mm	9 mm		3 V			e4	30		260		9 mm	YES
LTC4367CMS8#PBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	COMMERCIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY			1	1			GULL WING		5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	70 Cel		0 Cel	MATTE TIN		DUAL	S-PDSO-G8		60 V	1.1 mm	3 mm		2.5 V			e3					3 mm	YES
TPS2557DRBR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	SQUARE	YES		PLASTIC/EPOXY	.12 mA		1	1			NO LEAD		5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	S-PDSO-N8	2	6.5 V	1 mm	3 mm	Not Qualified	2.5 V			e4	NOT SPECIFIED		260		3 mm	YES
LTC4416EMS#PBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	COMMERCIAL EXTENDED	10	TSSOP	SQUARE	YES		PLASTIC/EPOXY			1	1			GULL WING		12 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.5 mm	85 Cel		0 Cel	Matte Tin (Sn) - annealed		DUAL	S-PDSO-G10	1	36 V	1.1 mm	3 mm	Not Qualified	3.6 V			e3	30		260		3 mm	NO
INA230AIDGST	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT		10	TSSOP	SQUARE	YES		PLASTIC/EPOXY			1	1			GULL WING		3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20		.5 mm	125 Cel		-40 Cel	MATTE TIN		DUAL	S-PDSO-G10	2	5.5 V	1.1 mm	3 mm		2.7 V			e3			260		3 mm	YES
BQ40Z50RSMR-R2	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	32	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	4			NO LEAD		14.4 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N32	2	26 V	1 mm	4 mm		2.2 V			e4	30		260		4 mm	YES
TPS3700QDSERQ1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	6	VSON	SQUARE	YES		PLASTIC/EPOXY	.013 mA		1	2			NO LEAD		5 V			SMALL OUTLINE, VERY THIN PROFILE			.5 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD SILVER		DUAL	S-PDSO-N6	2	18 V	.8 mm	1.5 mm		1.8 V			e4	30		260		1.5 mm	YES
LTC4121EUD#PBF	Analog Devices	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1				NO LEAD		15 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		.5 mm	125 Cel		-40 Cel	Matte Tin (Sn) - annealed		QUAD	S-PQCC-N16		40 V	.8 mm	3 mm		4.4 V			e3				+2.21V	3 mm	YES
TPS65023RSBR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	40	HVQCCN	SQUARE	YES	2550 kHz	PLASTIC/EPOXY	.043 mA	1.7 A	1	3			NO LEAD		3.6 V	3.6		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.2SQ,16	Power Management Circuits	.4 mm	85 Cel	.6 V	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	6 V	QUAD	S-PQCC-N40	2	6 V	.8 mm	5 mm	Not Qualified	2.5 V			e4	NOT SPECIFIED	6	260		5 mm	YES
TPS2561DRCT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	VSON	SQUARE	YES		PLASTIC/EPOXY	.125 mA		1	1			NO LEAD					SMALL OUTLINE, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	S-PDSO-N10	2	6.5 V	1 mm	3 mm	Not Qualified	2.5 V			e4	NOT SPECIFIED		260		3 mm
ADM1191-2ARMZ-R7	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	TSSOP	SQUARE	YES		PLASTIC/EPOXY	3 mA		1	1			GULL WING			3.15/26		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	MATTE TIN		DUAL	S-PDSO-G10	1	26 V	1.1 mm	3 mm	Not Qualified	3.15 V			e3			260		3 mm	NO
LTC2952IUF#PBF	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD					CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	MATTE TIN		QUAD	S-PQCC-N16	1	28 V	.8 mm	4 mm	Not Qualified	2.7 V			e3	30		260		4 mm	YES
BQ24075RGTR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	1.5 mA		1	1			NO LEAD		5 V	4.5/6.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	S-PQCC-N16	2	26 V	1 mm	3 mm	Not Qualified	4.35 V			e4	NOT SPECIFIED		260	+6.6V	3 mm	YES
TPS65987DDKRSHR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	COMMERCIAL EXTENDED	56		SQUARE	YES		UNSPECIFIED			1	1			NO LEAD		3.3 V							75 Cel		-10 Cel	NICKEL PALLADIUM GOLD SILVER		QUAD	S-XQCC-N56	3	3.45 V				3.135 V			e4	30		260			YES
LTC4368HMS-1#PBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	10	HTSSOP	SQUARE	YES		PLASTIC/EPOXY	.1 mA		1	1	CMOS		GULL WING		5 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20		.5 mm	125 Cel		-40 Cel	MATTE TIN		DUAL	S-PDSO-G10		60 V	1.1 mm	3 mm		2.5 V			e3					3 mm	YES
BQ24074RGTR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	1.5 mA		1	1			NO LEAD		5 V	4.5/10		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	S-PQCC-N16	2	26 V	1 mm	3 mm	Not Qualified	4.35 V			e4	NOT SPECIFIED		260	+10.5V	3 mm	YES
LTC4368CDD-2#PBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	COMMERCIAL	10	HVSON	SQUARE	YES		PLASTIC/EPOXY	.1 mA		1	1	CMOS		NO LEAD		5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20		.5 mm	70 Cel		0 Cel	MATTE TIN		DUAL	S-PDSO-N10		60 V	.8 mm	3 mm		2.5 V	SEATED HT-CALCULATED		e3					3 mm	YES
MCP73833T-FCI/MF	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	VSON	SQUARE	YES		PLASTIC/EPOXY	3 mA		1	1		TS 16949	NO LEAD		5.2 V	3.8/5.5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	MATTE TIN		DUAL	S-PDSO-N10	1	6 V	1 mm	3 mm	Not Qualified	3.75 V			e3			260		3 mm	YES
TLF35584QVVS2XUMA1	Infineon Technologies	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE	48	QCCN	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD					CHIP CARRIER				150 Cel		-40 Cel			QUAD	S-PQCC-N48										NOT SPECIFIED		NOT SPECIFIED			NO
BQ7695203PFBR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	48	TFQFP	SQUARE	YES		PLASTIC/EPOXY			1	16			GULL WING		59.2 V			FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ		.5 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQFP-G48	2	80 V	1.2 mm	7 mm		4.7 V			e4	30		260		7 mm	YES
INA225AQDGKRQ1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY	.375 mA		1	1			GULL WING		5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD SILVER		DUAL	S-PDSO-G8	2	36 V	1.1 mm	3 mm		2.7 V			e4	30		260		3 mm
INA229AQDGSRQ1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	10	TSSOP	SQUARE	YES		PLASTIC/EPOXY			1	1		AEC-Q100	GULL WING		3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20		.5 mm	125 Cel		-40 Cel	MATTE TIN		DUAL	S-PDSO-G10	2	5.5 V	1.1 mm	3 mm		2.7 V			e3	30		260	+52V	3 mm	NO
LTC2945IUD-1#TRPBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	12	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	1	CMOS		NO LEAD		5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	MATTE TIN		QUAD	S-PQCC-N12	1	80 V	.8 mm	3 mm		2.7 V			e3	30		260		3 mm	YES
TPS26621DRCT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	10	HVSON	SQUARE	YES		PLASTIC/EPOXY		.88 A	1	1			NO LEAD		24 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	S-PDSO-N10	1	60 V	1 mm	3 mm		4.5 V			e4	30		260		3 mm	YES
TPS26633RGER	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	24	HVQCCN	SQUARE	YES		PLASTIC/EPOXY		6 A	1	1			NO LEAD		24 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N24	1	60 V	1 mm	4 mm		60 V			e4	30		260		4 mm	YES
MMPF0100F0AEPR2	NXP Semiconductors	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	56	HVQCCN	SQUARE	YES		UNSPECIFIED			1	14	MOS		NO LEAD		3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	TIN		QUAD	S-XQCC-N56	3	4.5 V	.9 mm	8 mm		2.8 V			e3	40		260		8 mm	YES
TPS2552DRVR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	HVSON	SQUARE	YES		PLASTIC/EPOXY	.14 mA		1	1			NO LEAD		5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	S-PDSO-N6	1	6.5 V	.8 mm	2 mm	Not Qualified	2.5 V			e4	NOT SPECIFIED		260		2 mm	YES
BQ40Z50RSMR-R1	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	32	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD		14.4 V	2.2/26		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.16SQ,16	Power Management Circuits	.4 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N32	2	26 V	1 mm	4 mm	Not Qualified	2.2 V			e4	30		260		4 mm	YES
TPS259472LRPWR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	10	HVQCCN	SQUARE	YES		PLASTIC/EPOXY		6 A	1	1			NO LEAD		12 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC10,.08,20			125 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N10	2	23 V	1 mm	2 mm		2.7 V			e4	30		260	+1.2V	2 mm	YES

Power Management ICs

Power Management ICs (PMICs) are electronic components that are used to regulate and manage the power supply in electronic systems. They are used to optimize power usage, reduce power consumption, and increase battery life in portable devices.

PMICs typically include a range of components such as voltage regulators, power switches, and battery management circuits. Voltage regulators are used to maintain a stable voltage output despite fluctuations in the input voltage or load. Power switches are used to control the flow of power in a circuit, and battery management circuits are used to monitor and manage the charging and discharging of batteries.

PMICs are used in a wide range of applications, including mobile phones, laptops, tablets, and other portable devices. They are also used in automotive electronics, power supplies, and industrial automation systems. PMICs play a critical role in managing power consumption in electronic systems, reducing energy waste and extending battery life.

One of the key advantages of PMICs is their ability to provide multiple functions in a single package, reducing the number of components needed in a system and simplifying design. They also help to improve system reliability by protecting against overvoltage, overcurrent, and overtemperature conditions.