AUTOMOTIVE Power Management ICs 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Main Out Ripple Voltage	Control Technique	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Control Mode	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Nominal Input Voltage	Additional Features	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Nominal Threshold Voltage (V)	Length	Adjustable Threshold	Nominal Output Voltage	Maximum Input Voltage
V62/06637-09XE	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.03 mA		1	1			GULL WING			2 V	1.8/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	125 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G5	1	6 V	1.45 mm	1.6 mm	Not Qualified	1.6 V		RESET THRESHOLD VOLTAGE IS 2.93V		e4	NOT SPECIFIED		260	2.93	2.9 mm	NO
PS37B010122DSKR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	10	HVSON	SQUARE	YES		PLASTIC/EPOXY	.0026 mA		1	1			NO LEAD			16 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE	SOLCC10,.1,20		.5 mm	125 Cel			-40 Cel			DUAL	S-PDSO-N10		65 V	.8 mm	2.5 mm		2.7 V								+0.8V	2.5 mm	YES
UCD3138RJAR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE	40	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD			3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD SILVER		QUAD	S-PQCC-N40	2	3.6 V	1 mm	6 mm		3 V				e4	30	8	260		6 mm	NO
2U3838E18QDBVRG4Q1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.025 mA		1	1		AEC-Q100	GULL WING			1.8 V	1.8		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G5	1	6 V	1.45 mm	1.6 mm	Not Qualified	1.6 V		RESET THRESHOLD VOLTAGE IS 1.71V		e4	30		260	+1.71V	2.9 mm	NO
LM3812MX-1.0	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING			5 V			SMALL OUTLINE			1.27 mm	125 Cel			-40 Cel			DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.9 mm		2 V		SEATED HGT-NOM							4.9 mm	NO
LM26484SQ	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	24	HVQCCN	RECTANGULAR	YES		UNSPECIFIED			1	1			NO LEAD			3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel			-40 Cel	TIN		QUAD	R-XQCC-N24	1	5.5 V	.8 mm	4 mm	Not Qualified	3 V				e3					5 mm	YES
UCD3138RGCR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE		HVQCCN	SQUARE	YES		PLASTIC/EPOXY	100 mA						NO LEAD						CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N64	2		.88 mm	9 mm						e4	30	8	260		9 mm
UCD3138064RGCR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE	64	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	100 mA		1		CMOS		NO LEAD						CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N64	3		.88 mm	9 mm						e4	30	8	260		9 mm
PS3703A4180DSERQ1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	6	VSON	SQUARE	YES		PLASTIC/EPOXY			1	1		AEC-Q100	NO LEAD			3.3 V			SMALL OUTLINE, VERY THIN PROFILE			.5 mm	125 Cel			-40 Cel			DUAL	S-PDSO-N6		5.5 V	.8 mm	1.5 mm		1.7 V		THRESHOLD VOLTAGE IS 1.8V						+1.8V	1.5 mm	NO
LM26484SQE	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	24	HVQCCN	RECTANGULAR	YES		UNSPECIFIED			1	1			NO LEAD			3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel			-40 Cel	TIN		QUAD	R-XQCC-N24	1	5.5 V	.8 mm	4 mm	Not Qualified	3 V				e3					5 mm	YES
P3703A4280DSERQ1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	6	VSON	SQUARE	YES		PLASTIC/EPOXY			1	1		AEC-Q100	NO LEAD			3.3 V			SMALL OUTLINE, VERY THIN PROFILE			.5 mm	125 Cel			-40 Cel			DUAL	S-PDSO-N6		5.5 V	.8 mm	1.5 mm		1.7 V									1.5 mm	YES
P3703A5120DSER	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	6	VSON	SQUARE	YES		PLASTIC/EPOXY	.007 mA		1	1			NO LEAD			3.3 V			SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.06,16		.5 mm	125 Cel			-40 Cel			DUAL	S-PDSO-N6		5.5 V	.8 mm	1.5 mm		1.7 V								+1.2V	1.5 mm	YES
SM72240MF-3.08/NOPB	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING			3.6 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	125 Cel			-40 Cel	Matte Tin (Sn)		DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm		1 V		RESET THRESHOLD VOLTAGE VTH= 3.08V		e3	NOT SPECIFIED		260	+3.08V	2.9 mm	NO
LM3812M-1.0	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING			5 V			SMALL OUTLINE			1.27 mm	125 Cel			-40 Cel			DUAL	R-PDSO-G8		5.25 V	1.75 mm	3.9 mm		2 V		SEATED HGT-NOM							4.9 mm	NO
LP3470A400DBVR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	CMOS		GULL WING			5.5 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	125 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G5	1	10 V	1.45 mm	1.6 mm		.95 V		RESET THRESHOLD VOLTAGE-NOM= 4V		e4	30		260		2.9 mm	NO
TPS3852G33DRBR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	8	HVSON	SQUARE	YES		PLASTIC/EPOXY	.019 mA		1	1			NO LEAD			5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-N8	1	6.5 V	1 mm	3 mm		1.6 V		THRESHOLD VOLTAGE IS 3.3 V		e4	30		260	+3.3V	3 mm	NO
UCD9090QRGZRQ1	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE	48	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	50 mA		1	11			NO LEAD			3.3 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	Power Management Circuits	.5 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N48	3	3.6 V	1 mm	7 mm	Not Qualified	3 V				e4	30		260		7 mm	NO
PBQ75614PAPQ1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	64	HTFQFP	SQUARE	YES		PLASTIC/EPOXY			1	1			GULL WING						FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH			.5 mm	125 Cel			-40 Cel			QUAD	S-PQFP-G64			1.2 mm	10 mm											10 mm	NO
TL7780-5DR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			2	1			GULL WING			5 V			SMALL OUTLINE			1.27 mm	125 Cel			-40 Cel			DUAL	R-PDSO-G16		18 V	1.75 mm	3.9 mm	Not Qualified	3.5 V									9.9 mm	NO
TPS2480PWR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	20	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	1 mA	500 A	1	1			GULL WING			48 V	9/80		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Power Management Circuits	.65 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G20	1	80 V	1.2 mm	4.4 mm	Not Qualified	9 V				e4	30		260		6.5 mm	YES
TPS3852H18QDRBRQ1	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE	8	HVSON	SQUARE	YES		PLASTIC/EPOXY	.019 mA		1	1			NO LEAD			5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	125 Cel			-40 Cel	MATTE TIN		DUAL	S-PDSO-N8	2	6.5 V	1 mm	3 mm		1.6 V		THRESHOLD VOLTAGE IS 1.8V		e3	30		260	+1.8V	3 mm	NO
TL7702BQDR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	3.5 mA		1	1	BIPOLAR		GULL WING			5 V	3.6/18		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	125 Cel			-40 Cel			DUAL	R-PDSO-G8		18 V	1.75 mm	3.9 mm	Not Qualified	3.6 V		POWER-ON RESET GENERATOR			NOT SPECIFIED		NOT SPECIFIED	+2.53V	4.9 mm	YES
LP873200RHDTQ1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	28	HVQCCN	SQUARE	YES	2200 kHz	PLASTIC/EPOXY		2 A	1	4			NO LEAD		PULSE WIDTH MODULATION	3.7 V		BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20		.5 mm	125 Cel	.7 V	CURRENT-MODE	-40 Cel	Matte Tin (Sn)	3.36 V	QUAD	S-PQCC-N28	2	5.5 V	1 mm	5 mm		2.8 V	3.7 V		2.8 V	e3	30	4	260	+0.36, 0.3V	5 mm	YES	1 V	5.5 V
LMG3411R050RWHR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	32	HQCCN	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD			12 V			CHIP CARRIER, HEAT SINK/SLUG				125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N32	3	18 V	.9 mm	8 mm		9.5 V				e4	30		260		8 mm	NO
TPS386020RGPT	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE	20	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	4			NO LEAD			3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N20	2	6.5 V	1 mm	4 mm	Not Qualified	1.8 V				e4	30		260		4 mm	YES
BQ24014DRCTG4	Texas Instruments		AUTOMOTIVE	10	SON	RECTANGULAR	YES		PLASTIC/EPOXY	5 mA						NO LEAD				3/16.5		SMALL OUTLINE	SOLCC10,.12,20	Power Management Circuits	.5 mm	125 Cel			-40 Cel			DUAL	R-PDSO-N10					Not Qualified						NOT SPECIFIED		NOT SPECIFIED
LM3723EM5-4.63	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING			2.5 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		.953 mm	125 Cel			-40 Cel			DUAL	R-PDSO-G5		5.5 V	1.22 mm	1.6 mm		1 V		RESET THRESHOLD VOLTAGE IS 4.63V, IT CAN ALSO OPERATE WITH 3.3 AND 5 V						+4.63V	2.92 mm	NO
TPS3840PL28DBVR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.0007 mA		1	1			GULL WING			4.5 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SOP5,.11,37		.95 mm	125 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G5	1	10 V	1.45 mm	1.6 mm		1.5 V		THRESHOLD VOLTAGE= 2.8V		e4	NOT SPECIFIED		260	2.8	2.9 mm	NO
TPS70745PWPG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	20	HTSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	2			GULL WING						SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G20	2	6 V	1.2 mm	4.4 mm	Not Qualified	2.7 V		MANUAL RESET INPUT; POWER ON RESET GENERATOR		e4	30		260		6.5 mm	NO
BQ24314CDSGT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	8	HVSON	SQUARE	YES		PLASTIC/EPOXY	.6 mA		1	1			NO LEAD			5 V	3/30		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	Power Management Circuits	.5 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-N8	1	30 V	.8 mm	2 mm	Not Qualified	3 V		Battery over-voltage protection(Min/Max)(V) : 4.45 and 4.45		e4	30		260	+2.7V	2 mm	YES
TPS3838L30QDBVREP	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.03 mA		1	1			GULL WING			3 V	3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	125 Cel			-40 Cel			DUAL	R-PDSO-G5		6 V	1.45 mm	1.6 mm	Not Qualified	1.6 V		RESET THRESHOLD VOLTAGE IS 2.64V; MANUAL RESET; POWER-ON RESET GENERATOR						+2.64V	2.9 mm	NO
TPS389033KQDSERQ1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	6	VSON	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD			2.7 V			SMALL OUTLINE, VERY THIN PROFILE			.5 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD SILVER		DUAL	S-PDSO-N6	1	5.5 V	.8 mm	1.5 mm		1.5 V		THRESHOLD VOLTAGE IS 3.3V		e4	30		260	+3.3V	1.5 mm	NO
TPS3851H33EDRBT	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE	8	HVSON	SQUARE	YES		PLASTIC/EPOXY	.019 mA		1	1			NO LEAD			5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	125 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	S-PDSO-N8	1	6.5 V	1 mm	3 mm		1.6 V		THRESHOLD VOLTAGE IS 3.3V		e4	NOT SPECIFIED		NOT SPECIFIED	+3.3V	3 mm	NO
TPS2592ZADRCR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	10	HVSON	SQUARE	YES		PLASTIC/EPOXY	.65 mA		1	1			NO LEAD			12 V	12		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Power Management Circuits	.5 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-N10	2	18 V	1 mm	3 mm	Not Qualified	4.5 V				e4	30		260	+4.3V	3 mm	YES
BQ24013DRC	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	10	HVSON	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD			4.5 V	3/16.5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.11,20	Power Management Circuits	.5 mm	125 Cel			-40 Cel			DUAL	S-PDSO-N10		16.5 V	1 mm	3 mm	Not Qualified	3 V									3 mm	NO
BQ24032RHLRG4	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE	20	HVQCCN	RECTANGULAR	YES		PLASTIC/EPOXY	2 mA		1	1			NO LEAD				4.3/16		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20/24,.14X.18,20	Power Management Circuits	.5 mm	125 Cel			-40 Cel			QUAD	R-PQCC-N20		16 V	1 mm	3.5 mm	Not Qualified	4.35 V					NOT SPECIFIED		NOT SPECIFIED		4.5 mm	NO
TLV840MADL10DBVR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.0012 mA		1	1			GULL WING			1.5 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		.95 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G5	1	6 V	1.45 mm	1.6 mm		.7 V				e4	30		260	+1V	2.9 mm	NO
BQ50002RHBR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	32	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD			5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N32	2	5.5 V	1 mm	5 mm		4.5 V				e4	30		260		5 mm	NO
INA199B2DCKT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	6	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	5 mA		1	1			GULL WING			5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08		.65 mm	125 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G6	2	26 V	.8 mm	1.25 mm		2.7 V				e3	30		260		2 mm	NO
TPS70702PWP	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	20	HTSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.23 mA	.25 A	1	2			GULL WING	.000065 Vrms					SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	125 Cel	1.2 V		-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	DUAL	R-PDSO-G20	2	6 V	1.2 mm	4.4 mm	Not Qualified	2.7 V		MANUAL RESET INPUT; POWER ON RESET GENERATOR		e4	30	2	260	+3.135V	6.5 mm	YES
TL7780-12QD	Texas Instruments		AUTOMOTIVE	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	6.5 mA				BIPOLAR		GULL WING				3.5/18		SMALL OUTLINE	SOP16,.25	Power Management Circuits	1.27 mm	125 Cel			-40 Cel			DUAL	R-PDSO-G16					Not Qualified						NOT SPECIFIED		NOT SPECIFIED	+10.9V		NO
TLV840CADL14DBVR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.0012 mA		1	1			GULL WING			1.5 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		.95 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G5	1	6 V	1.45 mm	1.6 mm		.7 V				e4	30		260	+1.4V	2.9 mm	NO
TLV810RDBZT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	3	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.025 mA		1	1			GULL WING			3.3 V	1.1/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TO-236	Power Management Circuits	.95 mm	125 Cel			-40 Cel	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)		DUAL	R-PDSO-G3	1	6 V	1.12 mm	1.3 mm	Not Qualified	1.1 V				e4	NOT SPECIFIED		260	+2.64V	2.92 mm	NO
PTLV803EA29DPWR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	SON	RECTANGULAR	YES		PLASTIC/EPOXY	.0012 mA		1	1			NO LEAD			3.3 V			SMALL OUTLINE				125 Cel			-40 Cel			DUAL	R-PDSO-N4		6 V				1.7 V								+2.93V		YES
TPS3702AX18DDCR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	6	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.012 mA		1	1			GULL WING			5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.95 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G6	2	18 V	1.1 mm	1.6 mm		2 V				e4	30		260	+1.91V	2.9 mm	YES
BQ24751BRHDT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	28	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD					BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N28	2	24 V	1 mm	5 mm	Not Qualified	5 V				e4	30		260		5 mm	YES
LM3724EM5X-2.32	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING			2.5 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		.953 mm	125 Cel			-40 Cel	TIN LEAD		DUAL	R-PDSO-G5	1	5.5 V	1.22 mm	1.6 mm	Not Qualified	1 V		RESET THRESHOLD VOLTAGE IS 2.32V, IT CAN ALSO OPERATE WITH 3.3 AND 5 V		e0				+2.32V	2.92 mm	NO
TPS2514ADBVT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.2 mA		1	1			GULL WING			5 V	5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	125 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G6	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	4.5 V				e4	NOT SPECIFIED		260		2.9 mm	NO

Power Management ICs

Power Management ICs (PMICs) are electronic components that are used to regulate and manage the power supply in electronic systems. They are used to optimize power usage, reduce power consumption, and increase battery life in portable devices.

PMICs typically include a range of components such as voltage regulators, power switches, and battery management circuits. Voltage regulators are used to maintain a stable voltage output despite fluctuations in the input voltage or load. Power switches are used to control the flow of power in a circuit, and battery management circuits are used to monitor and manage the charging and discharging of batteries.

PMICs are used in a wide range of applications, including mobile phones, laptops, tablets, and other portable devices. They are also used in automotive electronics, power supplies, and industrial automation systems. PMICs play a critical role in managing power consumption in electronic systems, reducing energy waste and extending battery life.

One of the key advantages of PMICs is their ability to provide multiple functions in a single package, reducing the number of components needed in a system and simplifying design. They also help to improve system reliability by protecting against overvoltage, overcurrent, and overtemperature conditions.