INDUSTRIAL Power Management ICs 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Control Mode	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Nominal Threshold Voltage (V)	Length	Adjustable Threshold
TPS3306-15DGKRG4	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY	.04 mA		1	2			GULL WING	3.3 V	3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-G8	1	6 V	1.1 mm	3 mm	Not Qualified	2.7 V	POWER-ON RESET GENERATOR	e4	30		260	+2.93,1.4V	3 mm	NO
TPS3825-33DBVTG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.025 mA		1	1			GULL WING	3.3 V	1.1/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	1.1 V	RESET THRESHOLD VOLTAGE IS 2.93V	e4	NOT SPECIFIED		260	+2.93V	2.9 mm	NO
TPS65910A1RSLR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	48	HVQCCN	SQUARE	YES	3000 kHz	PLASTIC/EPOXY		1.5 A	1	1			NO LEAD	3.6 V	3.6		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16	Power Management Circuits	.4 mm	85 Cel	.6 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	3.3 V	QUAD	S-PQCC-N48	3	5.5 V	1 mm	6 mm	Not Qualified	1.7 V		e4	NOT SPECIFIED	12	260		6 mm	YES
UC2902DTR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	10 mA	6 A	1	1	BIPOLAR		GULL WING	5 V	5	BUCK-BOOST	SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	10 V	1.75 mm	3.9 mm	Not Qualified	4 V	UNDER VOLTAGE LOCKOUT	e4	30		260	+0.7V	4.9 mm	YES
ADM6316CY29ARJZ-R7	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.02 mA		1	1	CMOS		GULL WING	3.3 V	1/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	1 V	RESET THRESHOLD VOLTAGE IS 2.93V	e3	30		260	+2.93V	2.9 mm	NO
BQ24192IRGER	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	24	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	3 mA		1	1			NO LEAD		3.9/17	BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	S-PQCC-N24	2	17 V	1 mm	4 mm	Not Qualified	3.9 V	DETECTION THRESHOLD VOLTAGE IS 3.8V	e4	NOT SPECIFIED		260	+18V	4 mm	NO
BQ29312APWRG4	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	24	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	5			GULL WING	14 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G24	1	25 V	1.2 mm	4.4 mm	Not Qualified	4.5 V		e4	30		260		7.8 mm	NO
BQ294533DRVT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	HVSON	SQUARE	YES		PLASTIC/EPOXY			1	3			NO LEAD				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-N6	1	25 V	.8 mm	2 mm		3 V	Battery over-voltage protection(Min/Max)(V) : 4.49 and 4.51	e4	30		260		2 mm	YES
BQ4050RSMR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	32	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD	14.4 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N32	2	26 V	1 mm	4 mm		2.2 V		e4	30		260		4 mm	YES
BQ7692006PW	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	50 mA		1	1			GULL WING	18 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G20	2	25 V	1.2 mm	4.4 mm		6 V	DETECTION THRESHOLD VOLTAGE= 0.7V	e4	30		260	+0.7V	6.5 mm	YES
BQ78PL116RGZT	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	48	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	2			NO LEAD	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N48	3	4.5 V	1 mm	7 mm	Not Qualified	2.5 V		e4	30		260		7 mm	YES
DS1831CS/T&R	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.1 mA		1	4	CMOS		GULL WING	2.5 V	1/5.5		SMALL OUTLINE	SOP16,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	TIN LEAD		DUAL	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	1 V		e0					9.9 mm	NO
DS1831CS+T&R	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.1 mA		1	4			GULL WING	2.5 V	1/5.5		SMALL OUTLINE	SOP16,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	1 V		e3	30		260		9.9 mm	NO
ICL7665SAIBAZA	Renesas Electronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.01 mA		1	2	CMOS		GULL WING	5 V			SMALL OUTLINE	SOP8,.25		1.27 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G8	1	16 V	1.75 mm	3.9 mm		1.8 V		e3	30		260	+1.3V	4.9 mm	YES
LC709203FXE-03MH	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	9	VFBGA	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	CMOS		BALL	3.6 V	2.5/4.5		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA9,3X3,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	TIN SILVER COPPER		BOTTOM	R-PBGA-B9	1	4.5 V	.51 mm	1.6 mm	Not Qualified	2.5 V		e1	30		260		1.76 mm
LTC2909ITS8-5#PBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	VSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			3	2	CMOS		GULL WING	5 V			SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G8	1		1 mm	1.625 mm	Not Qualified	.5 V		e3	30		260		2.9 mm	YES
LTC2946IMS#TRPBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	3	CMOS		GULL WING	48 V			SMALL OUTLINE, THIN PROFILE	TSSOP16,.19,20		.5 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G16		100 V	1.1 mm	3 mm		4 V		e3				+1.3V	4.039 mm	YES
LTC4217IDHC#PBF	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	16	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	CMOS		NO LEAD	12 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-N16	1	26.5 V	.8 mm	3 mm	Not Qualified	2.9 V		e3	30		260		5 mm	YES
LTC4257IS8-1#PBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING				SMALL OUTLINE			1.27 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G8	1		1.752 mm	3.899 mm	Not Qualified		REQUIRES A NEGATIVE SUPPLY OF 48V	e3	30		260		4.9025 mm	NO
MAX1232EPA	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	DIP	RECTANGULAR	NO		PLASTIC/EPOXY	.2 mA		1	1	CMOS		THROUGH-HOLE	4.5 V	5		IN-LINE	DIP8,.3	Power Management Circuits	2.54 mm	85 Cel			-40 Cel	TIN LEAD		DUAL	R-PDIP-T8	1	5.5 V	4.572 mm	7.62 mm	Not Qualified	5 V	PUSHBUTTON RESET INPUT	e0				+4.37/4.62V	9.375 mm	NO
MAX1232EPA+	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	DIP	RECTANGULAR	NO		PLASTIC/EPOXY	.2 mA		1	1	CMOS		THROUGH-HOLE	4.5 V	5		IN-LINE	DIP8,.3	Power Management Circuits	2.54 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDIP-T8	1	5.5 V	4.572 mm	7.62 mm	Not Qualified	5 V	PUSHBUTTON RESET INPUT	e3	30		260	+4.37/4.62V	9.375 mm	NO
MAX4372FESA-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.06 mA		1	1	BICMOS		GULL WING	12 V	2.7/28		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	TIN LEAD		DUAL	R-PDSO-G8	1	28 V	1.75 mm	3.9 mm	Not Qualified	2.7 V		e0					4.9 mm	NO
MAX4372FESA+T	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.06 mA		1	1	BICMOS		GULL WING	12 V	2.7/28		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G8	1	28 V	1.75 mm	3.9 mm	Not Qualified	2.7 V		e3	30		260		4.9 mm	NO
MAX6301ESA	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.007 mA		1	1	CMOS		GULL WING	5 V	2/5.5		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	TIN LEAD		DUAL	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	1.2 V	ADJUSTABLE WATCHDOG TIMEOUT, OPEN-DRAIN OUTPUT	e0	20		240		4.9 mm	YES
MAX6301ESA+	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.007 mA		1	1	CMOS		GULL WING	5 V	2/5.5		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	1.2 V	ADJUSTABLE WATCHDOG TIMEOUT, OPEN-DRAIN OUTPUT	e3	30		260		4.9 mm	YES
MC32PF1510A6EPR2	NXP Semiconductors	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	40	HVQCCN	SQUARE	YES		UNSPECIFIED			1	8			NO LEAD	5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.2SQ,16		.4 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-XQCC-N40	3	7 V	.9 mm	5 mm		3.8 V		e4	40		260		5 mm	YES
P9242-RNDGI8	Renesas Electronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	48	HVQCCN	SQUARE	YES		UNSPECIFIED			1	10			NO LEAD	5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16		.4 mm	85 Cel			-40 Cel	Tin (Sn)		QUAD	S-XQCC-N48	3	21 V	1 mm	6 mm		4.25 V		e3	NOT SPECIFIED		260		6 mm	YES
STM690TM6F	STMicroelectronics	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.06 mA		1	1			GULL WING	3.6 V	3.3/5		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	1.1 V	RESET THRESHOLD VOLTAGE IS 3.075V	e4	30		260	+3.075V	4.9 mm	NO
TL7705AIDG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	3 mA		1	1			GULL WING	5 V	3.5/18		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G8	1	18 V	1.75 mm	3.9 mm	Not Qualified	3.5 V	THRESHOLD VOLTAGE IS 4.55V	e4	NOT SPECIFIED		260	4.55	4.9 mm	NO
TLC7705IDR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.016 mA		1	1	BICMOS		GULL WING	2.7 V	2/6		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G8	1	6 V	1.75 mm	3.9 mm	Not Qualified	2 V	POWER-ON RESET GENERATOR	e4	NOT SPECIFIED		260	+4.55V	4.9 mm	NO
TPS3305-33DGN	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	HTSSOP	SQUARE	YES		PLASTIC/EPOXY	.04 mA		1	2	CMOS		GULL WING	5 V	2/6		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-G8	1	6 V	1.07 mm	3 mm	Not Qualified	2.7 V	RESET THRESHOLD IS 4.55V, POWER ON RESET GENERATOR	e4	30		260	+2.93V	3 mm	NO
TPS3824-30DBVR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.025 mA		1	1	CMOS		GULL WING	3.3 V	2.5/5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	1.1 V	RESET THRESHOLD VOLTAGE IS 2.63V	e4	NOT SPECIFIED		260	+2.63V	2.9 mm	NO
UCS1001-2-BP-TR	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	20	HVQCCN	RECTANGULAR	YES		UNSPECIFIED	.75 mA		1	1			NO LEAD	5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20		.5 mm	85 Cel			-40 Cel	MATTE TIN		QUAD	R-XQCC-N20	3	5.5 V	.9 mm	4 mm		4.5 V		e3	40		260	2.5	4 mm	YES
AD8280WASTZ	Analog Devices		INDUSTRIAL	48	LFQFP	SQUARE	YES		PLASTIC/EPOXY	2 mA		1	7		AEC-Q100	GULL WING		7.5/30		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Power Management Circuits	.5 mm	105 Cel			-40 Cel	MATTE TIN		QUAD	S-PQFP-G48	3	30 V	1.6 mm	7 mm	Not Qualified	6 V		e3	30		260		7 mm	YES
ADM1816-10ARTZ-RL7	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.016 mA		1	1			GULL WING	5 V	1.2/5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TO-236	Power Management Circuits	.95 mm	105 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G3	1	5.5 V	1.12 mm	1.3 mm	Not Qualified	1.2 V	RESET THRESHOLD VOLTAGE IS 2.88V	e3	40		260	+2.88V	2.9 mm	NO
ADM691AARNZ-REEL7	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.1 mA		1	3	CMOS		GULL WING	5 V	5		SMALL OUTLINE	SOP16,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	1 V	WATCH DOG TIMER; AUTOMATIC BATTERY BACK UP POWER SWITCHING	e3	30		260		9.9 mm	NO
ADM691ARZ-REEL7	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	1.95 mA		1	1	CMOS		GULL WING	5 V	5		SMALL OUTLINE	SOP16,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G16	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	4.75 V	RESET CONTROL	e3	30		260		10.25 mm	NO
ADM695ARZ	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	1.95 mA		1	1	CMOS		GULL WING	5 V	5		SMALL OUTLINE	SOP16,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G16	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	4.75 V	RESET CONTROL	e3	30		260		10.25 mm	NO
BQ25616RTWT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	24	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD	5 V		BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20		.5 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N24	1	13.5 V	.8 mm	4 mm		3.9 V		e4	30		260	+3.9V	4 mm	YES
BQ27220YZFR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	9	VFBGA	RECTANGULAR	YES		UNSPECIFIED			1	1			BALL	3.6 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	85 Cel			-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)		BOTTOM	R-XBGA-B9	1	4.5 V	.625 mm	1.58 mm		2.45 V		e1	30		260		1.6205 mm	NO
BQ27421YZFR-G1A	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	9	VFBGA	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			BALL	3.6 V	3.6		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA9,3X3,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	TIN SILVER COPPER		BOTTOM	R-PBGA-B9	1	4.5 V	.625 mm	1.58 mm	Not Qualified	2.45 V		e1	30		260		1.62 mm	NO
BQ7791500PWT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	24	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.08 mA		1	6			GULL WING	20 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G24	2	25 V	1.2 mm	4.4 mm		3 V	Battery over-voltage protection(Min/Max)(V) : 3 and 4.575	e4	30		260		7.8 mm	YES
DS1233Z-10/T&R	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.05 mA		1	1	CMOS		GULL WING	5 V	5		SMALL OUTLINE	SOT-223	Power Management Circuits	2.3 mm	85 Cel			-40 Cel	Tin/Lead (Sn/Pb)		DUAL	R-PDSO-G4	1	5.5 V	1.8 mm	3.5 mm	Not Qualified	1.2 V		e0	20		240	+4.38V	6.5 mm	NO
DS1233Z-10+T&R	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.05 mA		1	1	CMOS		GULL WING	5 V	5		SMALL OUTLINE	SOT-223	Power Management Circuits	2.3 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G4	1	5.5 V	1.8 mm	3.5 mm	Not Qualified	1.2 V		e3	30		260	+4.38V	6.5 mm	NO
DS1813R-10/T&R	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.04 mA		1	1	CMOS		GULL WING		1.2/5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TO-236	Power Management Circuits	.95 mm	85 Cel			-40 Cel	Tin/Lead (Sn/Pb)		DUAL	R-PDSO-G3	1	5.5 V	1.12 mm	1.3 mm	Not Qualified	1.2 V	PUSHBUTTON RESET OPTION	e0	20		240	+4.35V	2.92 mm	NO
DS1813R-10T&R	Dallas Semiconductor	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3		RECTANGULAR	YES		PLASTIC/EPOXY	.05 mA		1	1			GULL WING	5 V			SMALL OUTLINE				85 Cel			-40 Cel			DUAL	R-PDSO-G3		5.5 V			Not Qualified	0 V								NO
DS1813R-10+T&R	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.04 mA		1	1	CMOS		GULL WING		1.2/5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TO-236	Power Management Circuits	.95 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G3	1	5.5 V	1.12 mm	1.3 mm	Not Qualified	1.2 V	PUSHBUTTON RESET OPTION	e3	30		260	+4.35V	2.92 mm	NO
HPA01065DRZR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	12	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			NO LEAD	3.6 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-N12	2	5.5 V	1 mm	2.5 mm	Not Qualified	2.7 V		e4	NOT SPECIFIED		260		4 mm	YES

Power Management ICs

Power Management ICs (PMICs) are electronic components that are used to regulate and manage the power supply in electronic systems. They are used to optimize power usage, reduce power consumption, and increase battery life in portable devices.

PMICs typically include a range of components such as voltage regulators, power switches, and battery management circuits. Voltage regulators are used to maintain a stable voltage output despite fluctuations in the input voltage or load. Power switches are used to control the flow of power in a circuit, and battery management circuits are used to monitor and manage the charging and discharging of batteries.

PMICs are used in a wide range of applications, including mobile phones, laptops, tablets, and other portable devices. They are also used in automotive electronics, power supplies, and industrial automation systems. PMICs play a critical role in managing power consumption in electronic systems, reducing energy waste and extending battery life.

One of the key advantages of PMICs is their ability to provide multiple functions in a single package, reducing the number of components needed in a system and simplifying design. They also help to improve system reliability by protecting against overvoltage, overcurrent, and overtemperature conditions.