Texas Instruments Power Management ICs 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Control Technique	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Control Mode	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Nominal Input Voltage	Additional Features	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Nominal Threshold Voltage (V)	Length	Adjustable Threshold	Maximum Input Voltage
BQ2004ESNG4	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	16	SOP	RECTANGULAR	YES	300 kHz	PLASTIC/EPOXY			1		CMOS		GULL WING	PULSE WIDTH MODULATION				PUSH-PULL	SMALL OUTLINE			1.27 mm	70 Cel		CURRENT-MODE	-20 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	1		1.78 mm	3.935 mm	Not Qualified		5 V		4.5 V	e4	30		260		9.97 mm		5.5 V
BQ24070RHLTG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	20	HVQCCN	RECTANGULAR	YES		PLASTIC/EPOXY	2 mA		1	1			NO LEAD				4.3/16		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20/24,.14X.18,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	R-PQCC-N20	2	16 V	1 mm	3.5 mm	Not Qualified	4.35 V				e4	30		260		4.5 mm	YES
BQ24083DRCRG4	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE	10	HVSON	SQUARE	YES		PLASTIC/EPOXY	2 mA		1	1			NO LEAD				4.5/6.5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Power Management Circuits	.5 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-N10	2	6.5 V	1 mm	3 mm	Not Qualified	4.5 V				e4	30		260		3 mm	YES
BQ24123RHLT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	20	HQCCN	RECTANGULAR	YES		PLASTIC/EPOXY	5 mA		1	1			NO LEAD					BUCK	CHIP CARRIER, HEAT SINK/SLUG			.5 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	R-PQCC-N20	2	16 V	1 mm	3.5 mm	Not Qualified	4.35 V				e4	30		260	+3.3V	4.5 mm	NO
BQ24296RGET	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	24	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	3000 mA		1	1			NO LEAD			5 V	3.9/6.2	BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	S-PQCC-N24	2	6.2 V	1 mm	4 mm	Not Qualified	3.9 V				e4	NOT SPECIFIED		260	+6.4V	4 mm	YES
BQ24617RGER	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	24	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	5 mA		1	1			NO LEAD				5/28	BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	S-PQCC-N24	2	24 V	1 mm	4 mm	Not Qualified	5 V				e4	NOT SPECIFIED		260	+3.85V	4 mm	YES
BQ294502DRVT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	HVSON	SQUARE	YES		PLASTIC/EPOXY	.002 mA		1	1			NO LEAD			10.8 V	3/15		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC6,.08,25	Power Management Circuits	.65 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	S-PDSO-N6	1	25 V	.8 mm	2 mm	Not Qualified	3 V		Battery over-voltage protection(Min/Max)(V) : 4.35 and 4.35		e4	NOT SPECIFIED		260		2 mm	NO
THS788PFDT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	COMMERCIAL	100	HTFQFP	SQUARE	YES		PLASTIC/EPOXY			1	4			GULL WING			3.3 V	3.3		FLATPACK	TQFP100,.63SQ	Other Analog ICs	.5 mm	70 Cel			0 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQFP-G100	4	3.465 V	1.2 mm	14 mm	Not Qualified	3.135 V				e4	30		260		14 mm	NO
TL7702AID	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	3 mA		1	1	BIPOLAR		GULL WING			5 V	3.5/18		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G8	1	18 V	1.75 mm	3.9 mm	Not Qualified	3.5 V		POWER ON RESET GENERATOR		e4	NOT SPECIFIED		260	2.53	4.9 mm	YES
TLC7701IPW	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.016 mA		1	1	BICMOS		GULL WING			2.7 V	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Power Management Circuits	.65 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G8	1	6 V	1.2 mm	3 mm	Not Qualified	2 V		POWER-ON RESET GENERATOR		e4	NOT SPECIFIED		260	+1.1V	4.4 mm	NO
TLC7701IPWG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.016 mA		1	1	BICMOS		GULL WING			2.7 V	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Power Management Circuits	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	6 V	1.2 mm	3 mm	Not Qualified	2 V		POWER-ON RESET GENERATOR		e4	30		260	+1.1V	4.4 mm	NO
TLC7701QPWR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	8	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.016 mA		1	1	CMOS		GULL WING			2.7 V	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Power Management Circuits	.65 mm	125 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G8	1	6 V	1.2 mm	3 mm	Not Qualified	2 V		POWER-ON RESET GENERATOR		e4	NOT SPECIFIED		260	+1.1V	4.4 mm	NO
TLC7701QPWRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	8	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.016 mA		1	1	CMOS		GULL WING			2.7 V	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Power Management Circuits	.65 mm	125 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G8	1	6 V	1.2 mm	3 mm	Not Qualified	2 V		POWER-ON RESET GENERATOR		e4	NOT SPECIFIED		260	+1.1V	4.4 mm	NO
TLC7701QPWRG4Q1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	8	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.016 mA		1	1	CMOS	AEC-Q100	GULL WING			2.7 V	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Power Management Circuits	.65 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	6 V	1.2 mm	3 mm	Not Qualified	2 V		RESET THRESHOLD VOLTAGE IS 1.1V; POWER-ON RESET GENERATOR		e4	30		260	+1.1V	4.4 mm	NO
TLV803EC30DBZR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	3	TSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.0012 mA		1	1			GULL WING			3.3 V			SMALL OUTLINE, THIN PROFILE	TO-236		.95 mm	125 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G3	1	6 V	1.12 mm	1.3 mm		1.7 V				e3	30		260	3.08	2.92 mm	NO
TPS2061DGN	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HTSSOP	SQUARE	YES		PLASTIC/EPOXY	.07 mA		1	1			GULL WING			3.3 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)		DUAL	S-PDSO-G8	1	5.5 V	1.07 mm	3 mm	Not Qualified	2.7 V		UNDERVOLTAGE LOCKOUT		e4	NOT SPECIFIED		260		3 mm	NO
TPS2065DGN	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HTSSOP	SQUARE	YES		PLASTIC/EPOXY	.07 mA		1	1			GULL WING			3.3 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)		DUAL	S-PDSO-G8	1	5.5 V	1.07 mm	3 mm	Not Qualified	2.7 V		UNDERVOLTAGE LOCKOUT		e4	NOT SPECIFIED		260		3 mm	NO
TPS2065DGN-1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HTSSOP	SQUARE	YES		PLASTIC/EPOXY	.07 mA		1	1			GULL WING			3.3 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD SILVER		DUAL	S-PDSO-G8	1	5.5 V	1.07 mm	3 mm	Not Qualified	2.7 V				e4	30		260		3 mm	NO
TPS2066CD	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.12 mA		1	2			GULL WING			5 V			SMALL OUTLINE			1.27 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm		4.5 V				e4	NOT SPECIFIED		260		4.9 mm	NO
TPS2069DDBVR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING			5 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	125 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G5	2	5.5 V	1.45 mm	1.6 mm		4.5 V				e4	30		260		2.9 mm	NO
TPS2114PWR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.09 mA		1	2			GULL WING			2.8 V	1.8/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Power Management Circuits	.65 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G8		5.5 V	1.2 mm	3 mm	Not Qualified	1.5 V		CAN SWITCH A VOLTAGE AS LOW AS 1.5V AS LONG AS THERE IS A MIN OF 2.8V AT ONE OF THE I/P POWER PINS			NOT SPECIFIED		NOT SPECIFIED		4.4 mm	YES
TPS22922YZPR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES		UNSPECIFIED	.00088 mA		1	1			BALL			1 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	85 Cel			-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)		BOTTOM	R-XBGA-B6	1	3.6 V	.5 mm	.9 mm	Not Qualified	.9 V				e1	NOT SPECIFIED		260		1.4 mm	NO
TPS22960RSET	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	VQCCN	SQUARE	YES		UNSPECIFIED	.0012 mA		1	2			NO LEAD			3.3 V			CHIP CARRIER, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD SILVER		QUAD	S-XQCC-N8	1	5.5 V	.6 mm	1.5 mm		1.62 V				e4	30		260		1.5 mm	NO
TPS22995HQDDCRQ1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT		6	VSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1		AEC-Q100	GULL WING			1.2 V			SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSOP6,.11,37		.95 mm	125 Cel			-40 Cel			DUAL	R-PDSO-G6	1	5.5 V	1.1 mm	1.6 mm		.8 V							260		2.9 mm	YES
TPS2376DR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.45 mA		1	1			GULL WING			48 V	48		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	57 V	1.75 mm	3.9 mm	Not Qualified	0 V				e4	30		260		4.9 mm	NO
TPS2384PAP	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE	64	HTFQFP	SQUARE	YES		PLASTIC/EPOXY	14 mA		1	4			GULL WING			48 V	48		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	QFP64,.47SQ,20	Power Management Circuits	.5 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQFP-G64	3	57 V	1.2 mm	10 mm	Not Qualified	44 V				e4	30		260		10 mm	NO
TPS26612DDFR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	8	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	1.75 mA	.035 A	1	1			GULL WING		-15 V	15 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.11		.65 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	30 V	1.1 mm	1.6 mm		0 V				e4	30		260		2.9 mm	NO
TPS3305-18DR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.04 mA		1	2	CMOS		GULL WING			3.3 V	2/6		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	6 V	1.75 mm	3.9 mm	Not Qualified	2.7 V		RESET THRESHOLD IS 2.93V, POWER ON RESET GENERATOR		e4	30		260	+1.68V	4.9 mm	NO
TPS3306-18DGKG4	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY	.04 mA		1	2			GULL WING			3.3 V	3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-G8	1	6 V	1.1 mm	3 mm	Not Qualified	2.7 V		POWER-ON RESET GENERATOR		e4	30		260	+2.93,1.68V	3 mm	NO
TPS3306-33DGKRG4	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY	.04 mA		1	2			GULL WING			3.3 V	3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-G8	1	6 V	1.1 mm	3 mm	Not Qualified	2.7 V		POWER-ON RESET GENERATOR		e4	30		260		3 mm	NO
TPS3705-50DR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.05 mA		1	1	CMOS		GULL WING			5 V	2/6		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G8	1	6 V	1.75 mm	3.9 mm	Not Qualified	2 V		RESET THRESHOLD VOLTAGE IS 4.55V; POWER ON RESET GENERATOR; MANUAL RESET INPUT		e4	NOT SPECIFIED		260	+4.55V	4.9 mm	NO
TPS3760E012DYYR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT		14	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.0026 mA		1	1			GULL WING			16 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.13		.5 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G14	1	65 V	1.1 mm	2 mm		2.7 V				e4			260	0.8	4.2 mm	YES
TPS3809I50MDBVREP	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	MILITARY	3	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.025 mA		1	1			GULL WING			5 V	2/6		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TO-236	Power Management Circuits	.95 mm	125 Cel			-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G3	1	6 V	1.45 mm	1.6 mm	Not Qualified	2 V		RESET THRESHOLD VOLTAGE IS 4.55V		e4	NOT SPECIFIED		260	+4.55V	2.9 mm	NO
TPS3839G25DBZT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.0005 mA		1	1			GULL WING				1.2/6		SMALL OUTLINE	TO-236	Power Management Circuits	.96 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G3	1	6.5 V	1.22 mm	1.3 mm	Not Qualified	.9 V				e4	30		260	+2.325V	2.92 mm	NO
TPS3897PDRYT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	6	VSON	RECTANGULAR	YES		PLASTIC/EPOXY	.012 mA		1	1			NO LEAD			3.3 V			SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20		.5 mm	125 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-N6	1	6.5 V	.6 mm	1 mm	Not Qualified	1.7 V				e4	30		260	+0.5V	1.45 mm	YES
BQ2040SN-D111TRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	COMMERCIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING			4.25 V			SMALL OUTLINE			1.27 mm	70 Cel			0 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	2	6.5 V	1.75 mm	3.9 mm	Not Qualified	3 V				e4	30		260		9.9 mm	YES
BQ24020DRCR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	10	HVSON	SQUARE	YES		PLASTIC/EPOXY	2 mA		1	2			NO LEAD				4.5/6.5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.11,20	Power Management Circuits	.5 mm	125 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	S-PDSO-N10	2	6.5 V	1 mm	3 mm	Not Qualified	4.5 V				e4	NOT SPECIFIED		260		3 mm	NO
BQ24070RHLT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	20	HVQCCN	RECTANGULAR	YES		PLASTIC/EPOXY	2 mA		1	1			NO LEAD				4.3/16		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20/24,.14X.18,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	R-PQCC-N20	2	16 V	1 mm	3.5 mm	Not Qualified	4.35 V				e4	30		260		4.5 mm	YES
BQ24095DGQT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	OTHER	10	HTSSOP	SQUARE	YES		PLASTIC/EPOXY	1 mA		1	1			GULL WING			5 V	3.5/12		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Power Management Circuits	.5 mm	125 Cel			0 Cel	NICKEL PALLADIUM GOLD SILVER		DUAL	S-PDSO-G10	1	6.45 V	1.1 mm	3 mm	Not Qualified	4.45 V				e4	30		260	+6.65V	3 mm	YES
BQ24200DGN	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HTSSOP	SQUARE	YES		PLASTIC/EPOXY			1	1			GULL WING						SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-G8	1	13.5 V	1.07 mm	3 mm	Not Qualified	2.8 V		OPTIONAL TEMPERATURE MONITORING BEFORE AND DURING CHARGE		e4	30		260		3 mm	NO
BQ24745RHDR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	OTHER	28	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	12 mA		1	1			NO LEAD			20 V	7/24		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	Power Management Circuits	.5 mm	125 Cel			0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	S-PQCC-N28	2	24 V	1 mm	5 mm	Not Qualified	7 V				e4	NOT SPECIFIED		260	+2.4V	5 mm	YES
BQ25071DQCT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			NO LEAD			4.5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-N10	2	10.2 V	.8 mm	2 mm		3.75 V		RECHARGE DETECTION THRESHOLD IS 3.3V		e4	30		260	+3.5V	3 mm	YES
BQ27510DRZT-G1	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	12	VSON	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			NO LEAD			3.6 V			SMALL OUTLINE, VERY THIN PROFILE			.4 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-N12	2	5.5 V	1 mm	2.5 mm	Not Qualified	2.7 V				e4	30		260		4 mm
BQ29410PW	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING			14 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	110 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	25 V	1.2 mm	3 mm	Not Qualified	4 V		Battery over-voltage protection(Min/Max)(V) : 4.325 and 4.375		e4	30		260		4.4 mm	NO
O917A133TRGZTQ1	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	48	HVQCCN	SQUARE	YES	2700 kHz	PLASTIC/EPOXY		7 A	1	10			NO LEAD			3.8 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	105 Cel	.7 V		-40 Cel	NICKEL PALLADIUM GOLD	3.3 V	QUAD	S-PQCC-N48	3	5.25 V	1 mm	7 mm		3.135 V				e4	30	10	260		7 mm	YES
O917A152TRGZRQ1	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	48	HVQCCN	SQUARE	YES	2700 kHz	PLASTIC/EPOXY		7 A	1	10			NO LEAD			3.8 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	105 Cel	.7 V		-40 Cel	NICKEL PALLADIUM GOLD	3.3 V	QUAD	S-PQCC-N48	3	5.25 V	1 mm	7 mm		3.135 V				e4	30	10	260		7 mm	YES
PTPS3840DL16DBVRQ1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.0007 mA		1	1		AEC-Q100	GULL WING			4.5 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	125 Cel			-40 Cel			DUAL	R-PDSO-G5		10 V	1.45 mm	1.6 mm		1.5 V		THRESHOLD VOLTAGE= 1.6V						+1.6V	2.9 mm	NO
TPS2041BDG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.07 mA		1	1			GULL WING			3.3 V			SMALL OUTLINE			1.27 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	2.7 V		UNDERVOLTAGE LOCKOUT		e4	NOT SPECIFIED		260		4.9 mm	NO

Power Management ICs

Power Management ICs (PMICs) are electronic components that are used to regulate and manage the power supply in electronic systems. They are used to optimize power usage, reduce power consumption, and increase battery life in portable devices.

PMICs typically include a range of components such as voltage regulators, power switches, and battery management circuits. Voltage regulators are used to maintain a stable voltage output despite fluctuations in the input voltage or load. Power switches are used to control the flow of power in a circuit, and battery management circuits are used to monitor and manage the charging and discharging of batteries.

PMICs are used in a wide range of applications, including mobile phones, laptops, tablets, and other portable devices. They are also used in automotive electronics, power supplies, and industrial automation systems. PMICs play a critical role in managing power consumption in electronic systems, reducing energy waste and extending battery life.

One of the key advantages of PMICs is their ability to provide multiple functions in a single package, reducing the number of components needed in a system and simplifying design. They also help to improve system reliability by protecting against overvoltage, overcurrent, and overtemperature conditions.