Texas Instruments Power Management ICs 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Nominal Input Voltage	Additional Features	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Nominal Threshold Voltage (V)	Length	Adjustable Threshold	Maximum Input Voltage
TPS2051BDBVTG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.07 mA		1	1			GULL WING		3.3 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		.95 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	2.7 V		UNDERVOLTAGE LOCKOUT		e4	NOT SPECIFIED		260		2.9 mm	NO
TPS3106K33DBVR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.027 mA		1	1	CMOS		GULL WING		3.3 V	0.4/3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G6	1	3.6 V	1.45 mm	1.6 mm	Not Qualified	.9 V		RESET THRESHOLD VOLTAGE IS 2.941V; POWER ON RESET GENERATOR		e4	30		260	+2.941V	2.9 mm	NO
TPS3823-33DBVR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.025 mA		1	1	CMOS		GULL WING		3.3 V	2.5/5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	1.1 V		RESET THRESHOLD VOLTAGE IS 2.93V		e4	NOT SPECIFIED		260	+2.93V	2.9 mm	NO
TL7705AIDR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	3 mA		1	1	BIPOLAR		GULL WING		5 V	3.5/18		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G8	1	18 V	1.75 mm	3.9 mm	Not Qualified	3.5 V		THRESHOLD VOLTAGE IS 4.55V		e4	NOT SPECIFIED		260	4.55	4.9 mm	NO
TPS2115APWR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.09 mA		1	1			GULL WING		2.8 V	1.8/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP8,.25,25	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	5.5 V	1.2 mm	3 mm	Not Qualified	1.5 V		CAN SWITCH A VOLTAGE AS LOW AS 1.5V AS LONG AS THERE IS A MIN OF 2.8V AT ONE OF THE I/P POWER PINS		e4	30		260		4.4 mm	YES
BQ25505RGRT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	20	HVQCCN	SQUARE	YES	1000 kHz	PLASTIC/EPOXY			1	1			NO LEAD	PULSE FREQUENCY MODULATION			BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N20	1	5.1 V	1 mm	3.5 mm		.6 V			.1 V	e4	30		260		3.5 mm	YES	5.1 V
TPS2044BD	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.14 mA		1	4			GULL WING		3.3 V			SMALL OUTLINE			1.27 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	2.7 V		UNDERVOLTAGE LOCKOUT		e4	NOT SPECIFIED		260		9.9 mm	NO
BQ24450DWTR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	OTHER	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY		.08 A	1	1			GULL WING		10 V		SINGLE	SMALL OUTLINE			1.27 mm	70 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	2	40 V	2.65 mm	7.5 mm	Not Qualified	5 V	10 V		5 V	e4	30		260		10.3 mm	NO	40 V
LM5060QDGSRQ1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	10	TSSOP	SQUARE	YES		PLASTIC/EPOXY		500 A	1	1			GULL WING		14 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.5 mm	125 Cel		-40 Cel	MATTE TIN		DUAL	S-PDSO-G10	1	65 V	1.1 mm	3 mm		5.5 V				e3	30		260		3 mm	YES
UCD90160ARGCT	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE	64	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD		3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N64	3	3.6 V	1 mm	9 mm		3 V				e4	30		260		9 mm	YES
TPS3106K33DBVRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.027 mA		1	1	CMOS		GULL WING		3.3 V	0.4/3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G6	1	3.6 V	1.45 mm	1.6 mm	Not Qualified	.9 V		RESET THRESHOLD VOLTAGE IS 2.941V; POWER ON RESET GENERATOR		e4	30		260	+2.941V	2.9 mm	NO
TPS3813K33QDBVRQ1	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.025 mA		1	1			GULL WING		3.3 V	2/6		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	125 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G6	1	6 V	1.45 mm	1.6 mm	Not Qualified	2 V		DETECTION THRESHOLD VOLTAGE IS 2.93V; POWER ON RESET GENERATOR		e4	NOT SPECIFIED		260	+2.93V	2.9 mm	NO
BQ78350DBTR-R1A	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	30		RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING		2.5 V							85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G30	2	2.6 V				2.4 V				e4	30		260			YES
TPS22950YBHR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	6	VFBGA	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			BALL		5 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,16		.4 mm	125 Cel		-40 Cel	TIN SILVER COPPER		BOTTOM	R-PBGA-B6	1	5.5 V	.4 mm	.706 mm		1.8 V				e1	30		260	0.044	1.106 mm	YES
TPS2557DRBR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	SQUARE	YES		PLASTIC/EPOXY	.12 mA		1	1			NO LEAD		5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	S-PDSO-N8	2	6.5 V	1 mm	3 mm	Not Qualified	2.5 V				e4	NOT SPECIFIED		260		3 mm	YES
INA230AIDGST	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT		10	TSSOP	SQUARE	YES		PLASTIC/EPOXY			1	1			GULL WING		3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20		.5 mm	125 Cel		-40 Cel	MATTE TIN		DUAL	S-PDSO-G10	2	5.5 V	1.1 mm	3 mm		2.7 V				e3			260		3 mm	YES
BQ40Z50RSMR-R2	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	32	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	4			NO LEAD		14.4 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N32	2	26 V	1 mm	4 mm		2.2 V				e4	30		260		4 mm	YES
TPS3700QDSERQ1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	6	VSON	SQUARE	YES		PLASTIC/EPOXY	.013 mA		1	2			NO LEAD		5 V			SMALL OUTLINE, VERY THIN PROFILE			.5 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD SILVER		DUAL	S-PDSO-N6	2	18 V	.8 mm	1.5 mm		1.8 V				e4	30		260		1.5 mm	YES
TL7705ACDRE4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	COMMERCIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	3 mA		1	1	BIPOLAR		GULL WING		5 V	3.5/18		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	70 Cel		0 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	18 V	1.75 mm	3.9 mm	Not Qualified	3.5 V		POWER ON RESET GENERATOR		e4	30		260	+4.55V	4.9 mm	YES
TPS2042BDG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	2			GULL WING		3.3 V			SMALL OUTLINE			1.27 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	2.7 V		UNDERVOLTAGE LOCKOUT		e4	30		260		4.9 mm	NO
TPS65023RSBR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	40	HVQCCN	SQUARE	YES	2550 kHz	PLASTIC/EPOXY	.043 mA	1.7 A	1	3			NO LEAD		3.6 V	3.6		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.2SQ,16	Power Management Circuits	.4 mm	85 Cel	.6 V	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	6 V	QUAD	S-PQCC-N40	2	6 V	.8 mm	5 mm	Not Qualified	2.5 V				e4	NOT SPECIFIED	6	260		5 mm	YES
TPS2378DDAR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HLSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.85 mA		1	1			GULL WING		1.4 V	40/57		SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)		DUAL	R-PDSO-G8	2	57 V	1.7 mm	3.9 mm	Not Qualified	0 V		RESET THRESHOLD VOLTAGE IS 3.9V		e4	NOT SPECIFIED		260	+3.9V	4.9 mm	NO
TPS2561DRCT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	VSON	SQUARE	YES		PLASTIC/EPOXY	.125 mA		1	1			NO LEAD					SMALL OUTLINE, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	S-PDSO-N10	2	6.5 V	1 mm	3 mm	Not Qualified	2.5 V				e4	NOT SPECIFIED		260		3 mm
BQ35100PWR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	14	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING		3.6 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G14	2	4.5 V	1.2 mm	4.4 mm		2.7 V				e4	30		260		5 mm	NO
TPS3823-33DBVRG4	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.025 mA		1	1	CMOS		GULL WING		3.3 V	2.5/5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	1.1 V		RESET THRESHOLD VOLTAGE IS 2.93V		e4	NOT SPECIFIED		260	+2.93V	2.9 mm	NO
TPS2044BDG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.14 mA		1	4			GULL WING		3.3 V			SMALL OUTLINE			1.27 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	2.7 V		UNDERVOLTAGE LOCKOUT		e4	NOT SPECIFIED		260		9.9 mm	NO
TPS3809K33DBVT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.025 mA		1	1			GULL WING		3.3 V	2/6		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TO-236	Power Management Circuits	.95 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G3	1	6 V	1.45 mm	1.6 mm	Not Qualified	2 V		RESET THRESHOLD VOLTAGE IS 2.93V		e4	NOT SPECIFIED		260	+2.93V	2.9 mm	NO
BQ24075RGTR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	1.5 mA		1	1			NO LEAD		5 V	4.5/6.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	S-PQCC-N16	2	26 V	1 mm	3 mm	Not Qualified	4.35 V				e4	NOT SPECIFIED		260	+6.6V	3 mm	YES
TPS65987DDKRSHR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	COMMERCIAL EXTENDED	56		SQUARE	YES		UNSPECIFIED			1	1			NO LEAD		3.3 V							75 Cel		-10 Cel	NICKEL PALLADIUM GOLD SILVER		QUAD	S-XQCC-N56	3	3.45 V				3.135 V				e4	30		260			YES
TPS2552DBVR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.14 mA		1	1			GULL WING		5 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37		.95 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G6	1	6.5 V	1.45 mm	1.6 mm	Not Qualified	2.5 V				e4	NOT SPECIFIED		260		2.9 mm	YES
BQ24074RGTR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	1.5 mA		1	1			NO LEAD		5 V	4.5/10		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	S-PQCC-N16	2	26 V	1 mm	3 mm	Not Qualified	4.35 V				e4	NOT SPECIFIED		260	+10.5V	3 mm	YES
BQ7695203PFBR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	48	TFQFP	SQUARE	YES		PLASTIC/EPOXY			1	16			GULL WING		59.2 V			FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ		.5 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQFP-G48	2	80 V	1.2 mm	7 mm		4.7 V				e4	30		260		7 mm	YES
INA225AQDGKRQ1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY	.375 mA		1	1			GULL WING		5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD SILVER		DUAL	S-PDSO-G8	2	36 V	1.1 mm	3 mm		2.7 V				e4	30		260		3 mm
INA229AQDGSRQ1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	10	TSSOP	SQUARE	YES		PLASTIC/EPOXY			1	1		AEC-Q100	GULL WING		3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20		.5 mm	125 Cel		-40 Cel	MATTE TIN		DUAL	S-PDSO-G10	2	5.5 V	1.1 mm	3 mm		2.7 V				e3	30		260	+52V	3 mm	NO
TPS26621DRCT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	10	HVSON	SQUARE	YES		PLASTIC/EPOXY		.88 A	1	1			NO LEAD		24 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	S-PDSO-N10	1	60 V	1 mm	3 mm		4.5 V				e4	30		260		3 mm	YES
TPS26633RGER	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	24	HVQCCN	SQUARE	YES		PLASTIC/EPOXY		6 A	1	1			NO LEAD		24 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N24	1	60 V	1 mm	4 mm		60 V				e4	30		260		4 mm	YES
TPS2552DRVR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	HVSON	SQUARE	YES		PLASTIC/EPOXY	.14 mA		1	1			NO LEAD		5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	S-PDSO-N6	1	6.5 V	.8 mm	2 mm	Not Qualified	2.5 V				e4	NOT SPECIFIED		260		2 mm	YES
TPS259621DDAT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	8	HLSOP	RECTANGULAR	YES		PLASTIC/EPOXY		2 A	1	1			GULL WING		12 V			SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE			1.27 mm	125 Cel		-40 Cel	MATTE TIN		DUAL	R-PDSO-G8	2	19 V	1.7 mm	3.9 mm		2.7 V				e3	30		260		4.89 mm	YES
BQ40Z50RSMR-R1	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	32	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD		14.4 V	2.2/26		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.16SQ,16	Power Management Circuits	.4 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N32	2	26 V	1 mm	4 mm	Not Qualified	2.2 V				e4	30		260		4 mm	YES
TPS259472LRPWR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	10	HVQCCN	SQUARE	YES		PLASTIC/EPOXY		6 A	1	1			NO LEAD		12 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC10,.08,20			125 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N10	2	23 V	1 mm	2 mm		2.7 V				e4	30		260	+1.2V	2 mm	YES
BQ29700DSER	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	VSON	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD		3.6 V			SMALL OUTLINE, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-N6	1	8 V	.8 mm	1.5 mm		1.5 V		Battery over-voltage protection(Min/Max)(V) : 3.85 and 4.6		e4	30		260		1.5 mm	NO
TPS22918TDBVRQ1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT		6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1		AEC-Q100	GULL WING		1.2 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37		.95 mm	105 Cel		-40 Cel	MATTE TIN		DUAL	R-PDSO-G6	3	5.5 V	1.45 mm	1.6 mm		1 V					30		260		2.9 mm	NO
TPS2400DBVR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	1 mA	500 A	1	1			GULL WING		5 V	3.1/6.8		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G5	2	6.8 V	1.45 mm	1.6 mm	Not Qualified	3.1 V				e4	NOT SPECIFIED		260		2.9 mm	NO
BQ24075RGTRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	1.5 mA		1	1			NO LEAD		5 V	4.5/6.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N16	2	26 V	1 mm	3 mm	Not Qualified	4.35 V				e4	30		260	+6.6V	3 mm	YES
BQ78350DBT-R1A	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	30	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING		2.5 V			SMALL OUTLINE				85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G30	2	2.6 V				2.4 V				e4	30		260			YES
TPS2041BDGNR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HTSSOP	SQUARE	YES		PLASTIC/EPOXY	.07 mA		1	1			GULL WING		3.3 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)		DUAL	S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	2.7 V		UNDERVOLTAGE LOCKOUT		e4	NOT SPECIFIED		260		3 mm	NO
BQ21040DBVR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	OTHER	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING		5 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	125 Cel		0 Cel	MATTE TIN		DUAL	R-PDSO-G6	1	6.45 V	1.45 mm	1.6 mm		3.5 V		RECHARGE DETECTION THRESHOLD 4.105V		e3	30		260		2.9 mm	YES
TPS2552DBVT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.14 mA		1	1			GULL WING		5 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37		.95 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G6	1	6.5 V	1.45 mm	1.6 mm	Not Qualified	2.5 V				e4	NOT SPECIFIED		260		2.9 mm	YES

Power Management ICs

Power Management ICs (PMICs) are electronic components that are used to regulate and manage the power supply in electronic systems. They are used to optimize power usage, reduce power consumption, and increase battery life in portable devices.

PMICs typically include a range of components such as voltage regulators, power switches, and battery management circuits. Voltage regulators are used to maintain a stable voltage output despite fluctuations in the input voltage or load. Power switches are used to control the flow of power in a circuit, and battery management circuits are used to monitor and manage the charging and discharging of batteries.

PMICs are used in a wide range of applications, including mobile phones, laptops, tablets, and other portable devices. They are also used in automotive electronics, power supplies, and industrial automation systems. PMICs play a critical role in managing power consumption in electronic systems, reducing energy waste and extending battery life.

One of the key advantages of PMICs is their ability to provide multiple functions in a single package, reducing the number of components needed in a system and simplifying design. They also help to improve system reliability by protecting against overvoltage, overcurrent, and overtemperature conditions.