40 Switching Regulators & Controllers 769

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	Technology	Screening Level	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Control Mode	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Nominal Input Voltage	Additional Features	Minimum Input Voltage	Maximum Negative Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Length	Nominal Output Voltage	Maximum Input Voltage
ISL6353IRTZ-T	Renesas Electronics	SWITCHING CONTROLLER	INDUSTRIAL	40	HVQCCN	SQUARE	YES	500 kHz	PLASTIC/EPOXY			1			NO LEAD	PULSE WIDTH MODULATION			PHASE-SHIFT	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel			-40 Cel	MATTE TIN		QUAD	S-PQCC-N40	3		.8 mm	5 mm			5 V		4.5 V		e3	30		260	5 mm		25 V
LTM8045MPY#PBF	Analog Devices	SWITCHING CONTROLLER	MILITARY	40	BGA	RECTANGULAR	YES	2200 kHz	PLASTIC/EPOXY			1			BALL	PULSE WIDTH MODULATION			BUCK-BOOST	GRID ARRAY			1.27 mm	125 Cel		CURRENT-MODE	-55 Cel	TIN SILVER COPPER		BOTTOM	R-PBGA-B40	3		5.12 mm	6.25 mm			12 V	ALSO OPERATES IN ADJUSTABLE MODE FROM -2.5V TO 2.5V AND -15V TO 15V	2.8 V		e1	30		250	11.25 mm		18 V
LTC3853EUJ#TRPBF	Analog Devices	DUAL SWITCHING CONTROLLER	OTHER	40	HVQCCN	SQUARE	YES	830 kHz	PLASTIC/EPOXY		.15 A	1	CMOS		NO LEAD	PULSE WIDTH MODULATION			PHASE-SHIFT	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		CURRENT-MODE	0 Cel	MATTE TIN		QUAD	S-PQCC-N40	1		.8 mm	6 mm	Not Qualified		15 V		4.5 V		e3	30		260	6 mm	5 V	24 V
NCP81232MNTXG	Onsemi	SWITCHING REGULATOR	AUTOMOTIVE	40		SQUARE	YES	1320 kHz	UNSPECIFIED			1			NO LEAD	PULSE WIDTH MODULATION			BUCK	SPECIAL SHAPE				125 Cel			-40 Cel	MATTE TIN		UNSPECIFIED	S-XXSS-N40	1		1 mm	5 mm			12 V	ADJUSTABLE OUTPUT VOLTAGE RANGE FROM 0.6 V TO 5.3 V	4.5 V		e3	30		260	5 mm		20 V
IR35215MTRPBF	Infineon Technologies	DUAL SWITCHING CONTROLLER	INDUSTRIAL	40	HVQCCN	SQUARE	YES	2000 kHz	UNSPECIFIED			1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.2SQ,16		.4 mm	85 Cel			-40 Cel			QUAD	S-XQCC-N40	2		.85 mm	5 mm			3.3 V								5 mm
ISL62776IRTZ	Renesas Electronics	SWITCHING REGULATOR		40	HVQCCN	SQUARE	YES	1070 kHz	PLASTIC/EPOXY	13 mA		1			NO LEAD	PULSE WIDTH MODULATION			BUCK-BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.2SQ,16		.4 mm	100 Cel		CURRENT/VOLTAGE-MODE	-40 Cel	PURE MATTE TIN		QUAD	S-XQCC-N40	3		.85 mm	5 mm			5 V		4.75 V			30		260	5 mm		5.25 V
LTC3887EUJ#TRPBF	Analog Devices	SWITCHING CONTROLLER	AUTOMOTIVE	40	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			2	CMOS		NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20		.5 mm	125 Cel	.5 V	CURRENT-MODE	-40 Cel	Matte Tin (Sn) - annealed	5.5 V	QUAD	S-PQCC-N40	1		.8 mm	6 mm			12 V	SEATED HT-CALCULATED	4.5 V		e3			260	6 mm		24 V
NCP81611MNTXG	Onsemi	SWITCHING CONTROLLER	OTHER	40	HVQCCN	SQUARE	YES	1200 kHz	UNSPECIFIED			1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	100 Cel		CURRENT-MODE	-10 Cel	MATTE TIN		QUAD	S-XQCC-N40	1		1 mm	5 mm					4.6 V		e3	30		260	5 mm		5.4 V
TPS65250RHAT	Texas Instruments	SWITCHING REGULATOR	AUTOMOTIVE	40	HVQCCN	SQUARE	YES	2200 kHz	PLASTIC/EPOXY		3 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	Switching Regulator or Controllers	.5 mm	125 Cel	.8 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	17 V	QUAD	S-PQCC-N40	3		1 mm	6 mm	Not Qualified		12 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 17V	4.5 V		e4	30	3	260	6 mm		18 V
UCD74111RVF	Texas Instruments	SWITCHING REGULATOR	AUTOMOTIVE	40	HQCCN	RECTANGULAR	YES	2000 kHz	PLASTIC/EPOXY			1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG			.5 mm	125 Cel			-40 Cel			QUAD	R-PQCC-N40			1.52 mm	5 mm			12 V		4.7 V						7 mm		14 V
UCD74111RVFR	Texas Instruments	SWITCHING REGULATOR	AUTOMOTIVE	40	HQCCN	RECTANGULAR	YES	2000 kHz	PLASTIC/EPOXY	10 mA	15 A	1			NO LEAD	PULSE WIDTH MODULATION	12 V		BUCK	CHIP CARRIER, HEAT SINK/SLUG	LCC40,.2X.28,20	Switching Regulator or Controllers	.5 mm	125 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		QUAD	R-PQCC-N40	2	14 V	1.52 mm	5 mm	Not Qualified	4.7 V	12 V		4.7 V		e4	30	1	260	7 mm		14 V
UCD74120RVFR	Texas Instruments	SWITCHING REGULATOR	AUTOMOTIVE	40	HQCCN	RECTANGULAR	YES	2000 kHz	PLASTIC/EPOXY		25 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG			.5 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	R-PQCC-N40	2	14 V	1.52 mm	5 mm		4.7 V	12 V		4.7 V		e4	30	1	260	7 mm		14 V
PM5143QRWGTQ1	Texas Instruments	DUAL SWITCHING CONTROLLER	AUTOMOTIVE	40	HVQCCN	SQUARE	YES	2500 kHz	PLASTIC/EPOXY			1		AEC-Q100	NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	150 Cel		CURRENT-MODE	-40 Cel			QUAD	S-PQCC-N40			.9 mm	6 mm			12 V	ALSO AVAILABLE VOUT= 5V; ADJ O/P VOLTAGE= 0.6V TO 55V	3.5 V						6 mm	3.3 V	65 V
UCD74120RVF	Texas Instruments	SWITCHING REGULATOR	AUTOMOTIVE	40	HQCCN	RECTANGULAR	YES	2000 kHz	PLASTIC/EPOXY			1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG			.5 mm	125 Cel			-40 Cel			QUAD	R-PQCC-N40			1.52 mm	5 mm			12 V		4.7 V						7 mm		14 V
UCD74111RVFT	Texas Instruments	SWITCHING REGULATOR	AUTOMOTIVE	40	HQCCN	RECTANGULAR	YES	2000 kHz	PLASTIC/EPOXY	10 mA	15 A	1			NO LEAD	PULSE WIDTH MODULATION	12 V		BUCK	CHIP CARRIER, HEAT SINK/SLUG	LCC40,.2X.28,20	Switching Regulator or Controllers	.5 mm	125 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		QUAD	R-PQCC-N40	2	14 V	1.52 mm	5 mm	Not Qualified	4.7 V	12 V		4.7 V		e4	30	1	260	7 mm		14 V
XPS546A24ARVFR	Texas Instruments	SWITCHING REGULATOR	AUTOMOTIVE	40	HQCCN	RECTANGULAR	YES	1500 kHz	PLASTIC/EPOXY	12 mA	10 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG	LCC40,.2X.28,20		.5 mm	150 Cel	1.49 V	CURRENT-MODE	-40 Cel		1.51 V	QUAD	R-PQCC-N40			1.52 mm	5 mm			12 V		2.95 V						7 mm	1.5 V	16 V
XPS546B24ARVFR	Texas Instruments	SWITCHING REGULATOR	AUTOMOTIVE	40	HQCCN	RECTANGULAR	YES	1500 kHz	PLASTIC/EPOXY	17 mA	20 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG				150 Cel	.25 V	CURRENT-MODE	-40 Cel		5.5 V	DUAL	R-PQCC-N40							12 V		2.95 V								18 V
UCD3028RHAT	Texas Instruments	SWITCHING CONTROLLER	AUTOMOTIVE	40	HVQCCN	SQUARE	YES	2000 kHz	PLASTIC/EPOXY	80 mA		1			NO LEAD	PULSE WIDTH MODULATION	3.3 V	3.3	SINGLE	CHIP CARRIER	LCC40,.24SQ,20	Power Management Circuits	.5 mm	125 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	S-PQCC-N40	2		1 mm	6 mm	Not Qualified		3.3 V		3 V		e4	30	8	260	6 mm	3.3 V	3.6 V
905-6525100	Texas Instruments	SWITCHING REGULATOR	AUTOMOTIVE	40	HVQCCN	SQUARE	YES	2200 kHz	PLASTIC/EPOXY		3 A	1			NO LEAD	PULSE FREQUENCY MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	.8 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	17 V	QUAD	S-PQCC-N40	3		1 mm	6 mm			12 V		4.5 V		e4	30	3	260	6 mm		18 V
UCD74120RVFT	Texas Instruments	SWITCHING REGULATOR	AUTOMOTIVE	40	HQCCN	RECTANGULAR	YES	2000 kHz	PLASTIC/EPOXY		25 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG			.5 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	R-PQCC-N40	2	14 V	1.52 mm	5 mm		4.7 V	12 V		4.7 V		e4	30	1	260	7 mm		14 V
TPS65167ARHARG4	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	40	HVQCCN	SQUARE	YES	900 kHz	PLASTIC/EPOXY		4.9 A	1			NO LEAD	PULSE WIDTH MODULATION	12 V	12	BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	Power Management Circuits	.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N40	2		1 mm	6 mm	Not Qualified		12 V		6 V		e4	30		260	6 mm		14 V
TPS51621RHA	Texas Instruments	DUAL SWITCHING CONTROLLER	OTHER	40	HVQCCN	SQUARE	YES	500 kHz	PLASTIC/EPOXY			1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	105 Cel			-10 Cel			QUAD	S-PQCC-N40			1 mm	6 mm			5 V		4.5 V			NOT SPECIFIED		NOT SPECIFIED	6 mm		5.5 V
TPS65167RHAT	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	40	HVQCCN	SQUARE	YES	900 kHz	PLASTIC/EPOXY		4.9 A	1			NO LEAD	PULSE WIDTH MODULATION	12 V	12	BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	Power Management Circuits	.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N40	2		1 mm	6 mm	Not Qualified		12 V		6 V		e4	30		260	6 mm		14 V
TPS53661RSBR	Texas Instruments	SWITCHING CONTROLLER	OTHER	40	HVQCCN	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		240 A	1			NO LEAD					CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	105 Cel	.5 V		-10 Cel	NICKEL PALLADIUM GOLD	2.5 V	QUAD	S-PQCC-N40	2		.8 mm	5 mm					4.5 V		e4	30	1	260	5 mm		20 V
TPS53667RTAT	Texas Instruments	SWITCHING CONTROLLER	AUTOMOTIVE	40	HVQCCN	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		420 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	.5 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	2.5 V	QUAD	R-PQCC-N40	2		.8 mm	6 mm			12 V	ADJUSTABLE OUTPUT VOLATGE RANGE FROM 0.5 TO 2.5V	4.5 V		e4	30	1	260	6 mm		17 V
TPS40422RHAT	Texas Instruments	DUAL SWITCHING CONTROLLER	AUTOMOTIVE	40	HVQCCN	SQUARE	YES	1000 kHz	UNSPECIFIED		60 A	1			NO LEAD	PULSE WIDTH MODULATION			PHASE-SHIFT	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	.6 V	VOLTAGE-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.6 V	QUAD	S-XQCC-N40	3		1 mm	6 mm			12 V	OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 5.6V; 6.5 VOLT OUTPUT ALSO AVAILABLE	4.5 V		e4	NOT SPECIFIED	2	260	6 mm	3.3 V	20 V
TPS40425RHAR	Texas Instruments	DUAL SWITCHING CONTROLLER	AUTOMOTIVE	40	HVQCCN	SQUARE	YES	1500 kHz	PLASTIC/EPOXY		40 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	.6 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5 V	QUAD	S-PQCC-N40	3		1 mm	6 mm			12 V	VOUT FROM 0.6 V	4.5 V		e4	30	2	260	6 mm		20 V
TPS53622RSBT	Texas Instruments	SWITCHING CONTROLLER	AUTOMOTIVE	40	HVQCCN	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		80 A	1			NO LEAD				BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	125 Cel	.25 V		-40 Cel	NICKEL PALLADIUM GOLD SILVER	2.8125 V	QUAD	S-PQCC-N40	2		.8 mm	5 mm					4.5 V		e4	30	2	260	5 mm		17 V
TPS53681RSBT	Texas Instruments	DUAL SWITCHING CONTROLLER	AUTOMOTIVE	40	HVQCCN	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		300 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	125 Cel	.25 V		-40 Cel	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	2.8125 V	QUAD	S-PQCC-N40	2		.8 mm	5 mm			12 V	ALSO REQUIRES 3.3V NOM SUPPLY VOLTAGE	4.5 V		e4	30	2	260	5 mm		17 V
TPS65167ARHAR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	40	HVQCCN	SQUARE	YES	900 kHz	PLASTIC/EPOXY		4.9 A	1			NO LEAD	PULSE WIDTH MODULATION	12 V	12	BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	Power Management Circuits	.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	19 V	QUAD	S-PQCC-N40	2		1 mm	6 mm	Not Qualified		12 V		6 V	-2 V	e4	30		260	6 mm		14 V
TPS546C20ARVFR	Texas Instruments	SWITCHING REGULATOR	AUTOMOTIVE	40	HQCCN	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		35 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG			.5 mm	125 Cel	.35 V	VOLTAGE-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.5 V	QUAD	R-PQCC-N40	2		1.52 mm	5 mm			12 V	OUTPUT IN ADJUSTABLE MODE IS 0.35V TO 5.5V	4.5 V		e4	30	1	260	7 mm		18 V
TPS544B25RVFR	Texas Instruments	SWITCHING REGULATOR	AUTOMOTIVE	40	HQCCN	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		20 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG			.5 mm	125 Cel	.5 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	QUAD	R-PQCC-N40	2		1.52 mm	5 mm			12 V	OUTPUT VOLTAGE RANGE: 0.5 V TO 5.5 V	4.5 V		e4	30	1	260	7 mm		18 V
TPS53631RSBR	Texas Instruments	SWITCHING CONTROLLER	OTHER	40	HVQCCN	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		120 A	1			NO LEAD					CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	105 Cel	.5 V		-10 Cel	NICKEL PALLADIUM GOLD	2.5 V	QUAD	S-PQCC-N40	2		.8 mm	5 mm					4.5 V		e4	30	1	260	5 mm		20 V
TPS59620RHAT	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	40	HVQCCN	SQUARE	YES	500 kHz	PLASTIC/EPOXY		60 A	1			NO LEAD					CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	105 Cel	.3 V		-40 Cel	NICKEL PALLADIUM GOLD	1.5 V	QUAD	S-PQCC-N40	2		1 mm	6 mm					3 V		e4	30	1	260	6 mm		28 V
TPS53622RSBR	Texas Instruments	SWITCHING CONTROLLER	AUTOMOTIVE	40	HVQCCN	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		80 A	1			NO LEAD				BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	125 Cel	.25 V		-40 Cel	NICKEL PALLADIUM GOLD SILVER	2.8125 V	QUAD	S-PQCC-N40	2		.8 mm	5 mm					4.5 V		e4	30	2	260	5 mm		17 V
TPS40425RHAT	Texas Instruments	DUAL SWITCHING CONTROLLER	AUTOMOTIVE	40	HVQCCN	SQUARE	YES	1500 kHz	PLASTIC/EPOXY		40 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	.6 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5 V	QUAD	S-PQCC-N40	3		1 mm	6 mm			12 V	VOUT FROM 0.6 V	4.5 V		e4	30	2	260	6 mm		20 V
TPS65251-3RHAT	Texas Instruments	SWITCHING REGULATOR	AUTOMOTIVE	40	HVQCCN	SQUARE	YES	2200 kHz	PLASTIC/EPOXY		3 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	.8 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	17 V	QUAD	S-PQCC-N40	3		1 mm	6 mm			12 V	ALSO OPERATES IN PFM CONTROL TECHNIQUE; CUR LIM FOR BUCK 2 AND 3 IS 4.1 A; ADJ OUTPUT IS 0.8 TO 17V	4.5 V		e4	30	3	260	6 mm		17 V
TPS544B25RVFT	Texas Instruments	SWITCHING REGULATOR	AUTOMOTIVE	40	HQCCN	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		20 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG			.5 mm	125 Cel	.5 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	QUAD	R-PQCC-N40	2		1.52 mm	5 mm			12 V	OUTPUT VOLTAGE RANGE: 0.5 V TO 5.5 V	4.5 V		e4	30	1	260	7 mm		18 V
TPS53667RTAR	Texas Instruments	SWITCHING CONTROLLER	AUTOMOTIVE	40	HVQCCN	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		420 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	.5 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	2.5 V	QUAD	R-PQCC-N40	2		.8 mm	6 mm			12 V	ADJUSTABLE OUTPUT VOLATGE RANGE FROM 0.5 TO 2.5V	4.5 V		e4	30	1	260	6 mm		17 V
TPS53640ARSBR	Texas Instruments	SWITCHING CONTROLLER	OTHER	40	HVQCCN	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		160 A	1			NO LEAD					CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	105 Cel	.5 V		-10 Cel	NICKEL PALLADIUM GOLD	2.5 V	QUAD	S-PQCC-N40	2		.8 mm	5 mm					4.5 V		e4	30	1	260	5 mm		20 V
XTPS53689RSBT	Texas Instruments	SWITCHING CONTROLLER		40	HQCCN	SQUARE	YES	1500 kHz	PLASTIC/EPOXY		765 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG				125 Cel	.25 V		-40 Cel		5.5 V	QUAD	S-PQCC-N40									4.5 V				2				17 V
TPS59621RHAT	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	40	HVQCCN	SQUARE	YES	500 kHz	PLASTIC/EPOXY		60 A	1			NO LEAD					CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	105 Cel	.3 V		-40 Cel	NICKEL PALLADIUM GOLD	1.5 V	QUAD	S-PQCC-N40	3		1 mm	6 mm					3 V		e4	30	1	260	6 mm		28 V
TPS65167RHAR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	40	HVQCCN	SQUARE	YES	900 kHz	PLASTIC/EPOXY		4.9 A	1			NO LEAD	PULSE WIDTH MODULATION	12 V	12	BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	Power Management Circuits	.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N40	2		1 mm	6 mm	Not Qualified		12 V		6 V		e4	30		260	6 mm		14 V
TPS53647RTAR	Texas Instruments	SWITCHING CONTROLLER	AUTOMOTIVE	40	HVQCCN	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		240 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	.5 V		-40 Cel	NICKEL PALLADIUM GOLD	2.5 V	QUAD	S-PQCC-N40	2		.8 mm	6 mm			12 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.5 TO 2.5V	4.5 V		e4	30	1	260	6 mm		17 V
TPS65288RHAT	Texas Instruments	SWITCHING CONTROLLER	AUTOMOTIVE	40	HVQCCN	SQUARE	YES	2200 kHz	PLASTIC/EPOXY		3 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	Switching Regulator or Controllers	.5 mm	125 Cel	.8 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	17 V	QUAD	S-PQCC-N40	3		1 mm	6 mm	Not Qualified		12 V	ALSO OPERATES IN PFM CONTROL TECHNIQUE; PEAK CUR FOR VOUT 2 AND 3 IS 3 AMP	4.5 V		e4	30	3	260	6 mm		18 V
TPS53640ARSBT	Texas Instruments	SWITCHING CONTROLLER	OTHER	40	HVQCCN	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		160 A	1			NO LEAD					CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	105 Cel	.5 V		-10 Cel	NICKEL PALLADIUM GOLD	2.5 V	QUAD	S-PQCC-N40	2		.8 mm	5 mm					4.5 V		e4	30	1	260	5 mm		20 V
TPS65258RHAT	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	40	HVQCCN	SQUARE	YES	2200 kHz	PLASTIC/EPOXY		3 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	.8 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	15 V	QUAD	S-PQCC-N40	3		1 mm	6 mm	Not Qualified		12 V	PFM CONTROL TECHNIQUE ALSO POSSIBLE	4.5 V		e4	30	3	260	6 mm		16 V
XTPS53688RSBT	Texas Instruments	SWITCHING CONTROLLER	AUTOMOTIVE	40	HVQCCN	SQUARE	YES	1500 kHz	PLASTIC/EPOXY		765 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.20SQ(UNSPEC)			125 Cel	.25 V		-40 Cel		5.5 V	QUAD	S-PQCC-N40									4.5 V								17 V

Switching Regulators & Controllers

Switching regulators and controllers are electronic devices used to regulate the output voltage and current of power supplies. They operate by rapidly switching a power supply circuit between on and off states, resulting in a high-frequency waveform that can be filtered and smoothed to produce a stable output voltage.

Switching regulators and controllers offer several advantages over traditional linear regulators, including higher efficiency and the ability to handle a wider range of input voltages. They are commonly used in applications such as power supplies for computers, LED lighting, and motor control.

Switching regulators and controllers come in a variety of forms, including step-up (boost), step-down (buck), and step-up/down (buck-boost) configurations. They may be designed as integrated circuits (ICs) or as standalone modules.

Switching regulators and controllers typically include feedback control circuits to adjust the output voltage and current, as well as protection circuits to prevent overvoltage, overcurrent, and overtemperature conditions. They may also include features such as soft-start to reduce inrush currents and synchronization with external clock signals.