BATTERY CHARGE CONTROLLER Switching Regulators & Controllers 685

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Control Mode	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Nominal Input Voltage	Additional Features	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Length	Nominal Output Voltage	Maximum Input Voltage
TPS61222DCKR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	2000 kHz	PLASTIC/EPOXY		.4 A	1				GULL WING	HYSTERETIC CURRENT MODE			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	5 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5 V	DUAL	R-PDSO-G6	1		1.1 mm	1.25 mm	Not Qualified		1.2 V		.7 V	e4	30	1	260	2 mm	5 V	5.5 V
TPS61200DRCR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	10	HVSON	SQUARE	YES	1650 kHz	PLASTIC/EPOXY		1.5 A	1				NO LEAD	PULSE WIDTH MODULATION	1.2 V		BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12SQ,20	Switching Regulator or Controllers	.5 mm	85 Cel	1.8 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.5 V	DUAL	S-PDSO-N10	2		1 mm	3 mm	Not Qualified		1.2 V	ADJUSTABLE VOLTAGE FROM 0.3V TO 5.5V	.3 V	e4	NOT SPECIFIED	1	260	3 mm		5.5 V
TPS61200DRCRG4	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	10	HVSON	SQUARE	YES	1650 kHz	PLASTIC/EPOXY		1.5 A	1				NO LEAD	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Switching Regulator or Controllers	.5 mm	85 Cel	1.8 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.5 V	DUAL	S-PDSO-N10	2		1 mm	3 mm	Not Qualified		1.2 V	ALSO HAS ADJUSTABLE OUTPUT VOLTAGE FROM 1.8V TO 5.5V	.3 V	e4	NOT SPECIFIED	1	260	3 mm		5.5 V
TPS61220DCKR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	2000 kHz	PLASTIC/EPOXY		.4 A	1				GULL WING	HYSTERETIC CURRENT MODE			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	1.8 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	6 V	DUAL	R-PDSO-G6	1		1.1 mm	1.25 mm	Not Qualified		1.2 V	OPERATES IN ADJUSTABLE MODE 1.8 TO 5.5V	.7 V	e4	30	1	260	2 mm		5.5 V
TPS61222DCKT	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	2000 kHz	PLASTIC/EPOXY		.4 A	1				GULL WING	HYSTERETIC CURRENT MODE			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	5 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5 V	DUAL	R-PDSO-G6	1		1.1 mm	1.25 mm	Not Qualified		1.2 V		.7 V	e4	30	1	260	2 mm	5 V	5.5 V
TPS61070DDCRG4	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	VSSOP	RECTANGULAR	YES	1440 kHz	PLASTIC/EPOXY		.7 A	1				GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSOP6,.11,37	Switching Regulator or Controllers	.95 mm	85 Cel	1.8 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	DUAL	R-PDSO-G6	1		1 mm	1.6 mm	Not Qualified		1.2 V		.9 V	e4	30	1	260	2.9 mm		5.5 V
TPS61222MDCKTEP	Texas Instruments	BATTERY CHARGE CONTROLLER	MILITARY	6	TSSOP	RECTANGULAR	YES	2000 kHz	PLASTIC/EPOXY			1				GULL WING	HYSTERETIC CURRENT MODE			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	125 Cel	4.8 V	CURRENT-MODE	-55 Cel	NICKEL PALLADIUM GOLD	5.19 V	DUAL	R-PDSO-G6	1		1.1 mm	1.25 mm			1.2 V		.7 V	e4	30	1	260	2 mm	5 V	5.5 V
TPS61221DCKR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	2000 kHz	PLASTIC/EPOXY		.4 A	1				GULL WING	HYSTERETIC CURRENT MODE			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	3.3 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	3.3 V	DUAL	R-PDSO-G6	1		1.1 mm	1.25 mm	Not Qualified		1.2 V		.7 V	e4	30	1	260	2 mm	3.3 V	5.5 V
TPS65560RGTT	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	3 mA	1.8 A	1	1			NO LEAD	PULSE WIDTH MODULATION		2.7/4	BUCK-BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Power Management Circuits	.5 mm	85 Cel			-35 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	S-PQCC-N16	2		1 mm	3 mm	Not Qualified		3 V		1.6 V	e4	NOT SPECIFIED	1	260	3 mm		12 V
TPS61032PWPR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY		4.5 A	1				GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	5 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5 V	DUAL	R-PDSO-G16	2		1.2 mm	4.4 mm	Not Qualified		2.4 V		1.8 V	e4	30	1	260	5 mm	5 V	5.5 V
TPS61220DCKT	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	2000 kHz	PLASTIC/EPOXY		.4 A	1				GULL WING	HYSTERETIC CURRENT MODE			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	1.8 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	6 V	DUAL	R-PDSO-G6	1		1.1 mm	1.25 mm	Not Qualified		1.2 V	OPERATES IN ADJUSTABLE MODE 1.8 TO 5.5V	.7 V	e4	30	1	260	2 mm		5.5 V
TPS61030PWPR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY		4.5 A	1				GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	1.8 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	DUAL	R-PDSO-G16	2		1.2 mm	4.4 mm	Not Qualified		2.4 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 1.8V TO 5.5V	1.8 V	e4	30	1	260	5 mm		5.5 V
TPS61200DRCTG4	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	10	HVSON	SQUARE	YES	1650 kHz	PLASTIC/EPOXY		1.5 A	1				NO LEAD	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Switching Regulator or Controllers	.5 mm	85 Cel	1.8 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	DUAL	S-PDSO-N10	2		1 mm	3 mm	Not Qualified		1.2 V	ALSO HAS ADJUSTABLE OUTPUT VOLTAGE FROM 1.8V TO 5.5V	.3 V	e4	30		260	3 mm		5.5 V
TPS61200DRCT	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	10	HVSON	SQUARE	YES	1650 kHz	PLASTIC/EPOXY		1.5 A	1				NO LEAD	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Switching Regulator or Controllers	.5 mm	85 Cel	1.8 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.5 V	DUAL	S-PDSO-N10	2		1 mm	3 mm	Not Qualified		1.2 V	ALSO HAS ADJUSTABLE OUTPUT VOLTAGE FROM 1.8V TO 5.5V	.3 V	e4	NOT SPECIFIED	1	260	3 mm		5.5 V
TPS61070DDCR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	VSSOP	RECTANGULAR	YES	1440 kHz	PLASTIC/EPOXY		.7 A	1				GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSOP6,.11,37	Switching Regulator or Controllers	.95 mm	85 Cel	1.8 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	DUAL	R-PDSO-G6	1		1 mm	1.6 mm	Not Qualified		1.2 V		.9 V	e4	30	1	260	2.9 mm		5.5 V
TPS61221DCKT	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	2000 kHz	PLASTIC/EPOXY		.4 A	1				GULL WING	HYSTERETIC CURRENT MODE			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	3.3 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	3.3 V	DUAL	R-PDSO-G6	1		1.1 mm	1.25 mm	Not Qualified		1.2 V		.7 V	e4	30	1	260	2 mm	3.3 V	5.5 V
BQ24618RGER	Texas Instruments	BATTERY CHARGE CONTROLLER		24	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1		NMOS		NO LEAD	PULSE WIDTH MODULATION		4.7/28	BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N24	2	28 V	1 mm	4 mm	Not Qualified	4.7 V			4.7 V	e4	30		260	4 mm		28 V
MAX16929GGUI/V+T	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	28	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY					BICMOS		GULL WING			5,12		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Power Management Circuits	.635 mm	105 Cel			-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G28	1				Not Qualified					e3
TPS61202DRCT	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	10	HVSON	SQUARE	YES	1650 kHz	PLASTIC/EPOXY		1.5 A	1				NO LEAD	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Switching Regulator or Controllers	.5 mm	85 Cel	5 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5 V	DUAL	S-PDSO-N10	2		1 mm	3 mm	Not Qualified		1.2 V		.3 V	e4	NOT SPECIFIED	1	260	3 mm	5 V	5.5 V
MCP16251T-I/CH	Microchip Technology	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	575 kHz	PLASTIC/EPOXY		.1 A	1			TS 16949	GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37		.95 mm	85 Cel	1.8 V		-40 Cel	MATTE TIN	5.5 V	DUAL	R-PDSO-G6	1		1.45 mm	1.55 mm			1.5 V		.82 V	e3	40		260	2.9 mm	3.3 V
TPS61090RSARG4	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	700 kHz	PLASTIC/EPOXY		2.5 A	1				NO LEAD	PULSE WIDTH MODULATION			BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Switching Regulator or Controllers	.65 mm	85 Cel	1.8 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.5 V	QUAD	S-PQCC-N16	2		1 mm	4 mm	Not Qualified				1.8 V	e4	NOT SPECIFIED	1	260	4 mm		5.5 V
TPS61090RSAR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	700 kHz	PLASTIC/EPOXY		2.5 A	1				NO LEAD	PULSE WIDTH MODULATION			BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Switching Regulator or Controllers	.65 mm	85 Cel	1.8 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.5 V	QUAD	S-PQCC-N16	2		1 mm	4 mm	Not Qualified				1.8 V	e4	NOT SPECIFIED	1	260	4 mm		5.5 V
TPS61030RSAR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	700 kHz	PLASTIC/EPOXY		4.5 A	1				NO LEAD	PULSE WIDTH MODULATION			BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Switching Regulator or Controllers	.65 mm	85 Cel	1.8 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	QUAD	S-PQCC-N16	2		1 mm	4 mm	Not Qualified		2.4 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 1.8V TO 5.5V	1.8 V	e4	30	1	260	4 mm		5.5 V
TPS61222DCK	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY		.4 A	1				GULL WING	HYSTERETIC CURRENT MODE			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel		CURRENT-MODE	-40 Cel			DUAL	R-PDSO-G6			1.1 mm	1.25 mm	Not Qualified		1.2 V		.7 V					2 mm	5 V	5.5 V
TPS61030PWPRG4	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY		4.5 A	1				GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	1.8 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	DUAL	R-PDSO-G16	2		1.2 mm	4.4 mm	Not Qualified		2.4 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 1.8V TO 5.5V	1.8 V	e4	30	1	260	5 mm		5.5 V
TPS61030RSARG4	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	700 kHz	PLASTIC/EPOXY		4.5 A	1				NO LEAD	PULSE WIDTH MODULATION			BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Switching Regulator or Controllers	.65 mm	85 Cel	1.8 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	QUAD	S-PQCC-N16	2		1 mm	4 mm	Not Qualified		2.4 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 1.8V TO 5.5V	1.8 V	e4	30	1	260	4 mm		5.5 V
TPS61071DDCR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	VSSOP	RECTANGULAR	YES	1440 kHz	PLASTIC/EPOXY		.7 A	1				GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSOP6,.11,37	Switching Regulator or Controllers	.95 mm	85 Cel	1.8 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	DUAL	R-PDSO-G6	1		1 mm	1.6 mm	Not Qualified		1.2 V		.9 V	e4	30	1	260	2.9 mm		5.5 V
LT1513IR#PBF	Analog Devices	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	7	TO-263	RECTANGULAR	YES	580 kHz	PLASTIC/EPOXY	5.5 mA	5.4 A	1				GULL WING				SINGLE	SMALL OUTLINE			1.27 mm	125 Cel		CURRENT-MODE	-40 Cel	MATTE TIN OVER NICKEL		SINGLE	R-PSSO-G7	1		4.877 mm	8.89 mm	Not Qualified		5 V		2.7 V	e3	30		260	10.2235 mm	1.245 V	25 V
MAX713CPE	Maxim Integrated	BATTERY CHARGE CONTROLLER	COMMERCIAL	16	DIP	RECTANGULAR	NO		PLASTIC/EPOXY	10 mA	.1 A	1		CMOS		THROUGH-HOLE		5 V	5	SINGLE	IN-LINE	DIP16,.3	Power Management Circuits	2.54 mm	70 Cel		CURRENT-MODE	0 Cel	TIN LEAD		DUAL	R-PDIP-T16	1		4.572 mm	7.62 mm	Not Qualified		5 V		4.5 V	e0				19.175 mm		5.5 V
MAX713CPE+	Analog Devices	BATTERY CHARGE CONTROLLER	COMMERCIAL	16	DIP	RECTANGULAR	NO		PLASTIC/EPOXY	10 mA	.1 A	1		CMOS		THROUGH-HOLE		5 V	5	SINGLE	IN-LINE	DIP16,.3	Power Management Circuits	2.54 mm	70 Cel		CURRENT-MODE	0 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDIP-T16	1		4.572 mm	7.62 mm	Not Qualified		5 V		4.5 V	e3	30		260	19.175 mm		5.5 V
MCP16251T-I/CHVAO	Microchip Technology	BATTERY CHARGE CONTROLLER		6	SOP	RECTANGULAR	YES	575 kHz	PLASTIC/EPOXY		.225 A	1			AEC-Q100	GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel	1.8 V		-40 Cel		5.5 V	DUAL	R-PDSO-G6			1.45 mm	1.55 mm			1.5 V	PFM CONTROL TECHNIQ IS ALSO AVAILABLE	.35 V					2.9 mm	3.3 V
TPS61202DRCR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	10	HVSON	SQUARE	YES	1650 kHz	PLASTIC/EPOXY		1.5 A	1				NO LEAD	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Switching Regulator or Controllers	.5 mm	85 Cel	5 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5 V	DUAL	S-PDSO-N10	2		1 mm	3 mm	Not Qualified		1.2 V		.3 V	e4	NOT SPECIFIED	1	260	3 mm	5 V	5.5 V
MCP16252T-I/CH	Microchip Technology	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	575 kHz	PLASTIC/EPOXY		.1 A	1			TS 16949	GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37		.95 mm	85 Cel	1.8 V		-40 Cel	MATTE TIN	5.5 V	DUAL	R-PDSO-G6	1		1.45 mm	1.55 mm			1.5 V		.82 V	e3	40		260	2.9 mm	3.3 V
TLV61225DCKR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	2000 kHz	PLASTIC/EPOXY			1				GULL WING	HYSTERETIC CURRENT MODE			BOOST	SMALL OUTLINE			.65 mm	85 Cel	3.3 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	3.3 V	DUAL	R-PDSO-G6	1		1.1 mm	1.25 mm	Not Qualified		1.2 V		.7 V	e4	30	1	260	2 mm	3.3 V	3.3 V
TPS610981DSET	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	VSON	SQUARE	YES	3000 kHz	PLASTIC/EPOXY		.65 A	1				NO LEAD	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, VERY THIN PROFILE			.5 mm	85 Cel	3.201 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	3.399 V	DUAL	S-PDSO-N6	1		.8 mm	1.5 mm			1.5 V		.7 V	e4	30	2	260	1.5 mm	3.3 V	4.5 V
FAN501AMPX	Onsemi	BATTERY CHARGE CONTROLLER		10			YES	147 kHz	PLASTIC/EPOXY													LCC10/12,.12X.16,32	Switching Regulator or Controllers				CURRENT-MODE		NICKEL PALLADIUM GOLD				1				Not Qualified					e4	30		260
TLV61225DCKT	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	2000 kHz	PLASTIC/EPOXY			1				GULL WING	HYSTERETIC CURRENT MODE			BOOST	SMALL OUTLINE			.65 mm	85 Cel	3.3 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	3.3 V	DUAL	R-PDSO-G6	1		1.1 mm	1.25 mm	Not Qualified		1.2 V		.7 V	e4	30	1	260	2 mm	3.3 V	3.3 V
LT1513-2IT7#PBF	Analog Devices	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	7		RECTANGULAR	NO	580 kHz	PLASTIC/EPOXY		5.4 A	1				THROUGH-HOLE				SINGLE	FLANGE MOUNT				125 Cel		CURRENT-MODE	-40 Cel	MATTE TIN OVER NICKEL		ZIG-ZAG	R-PZFM-T7	1				Not Qualified		5 V		2.7 V	e3						25 V
TPS61097A-33DBVT	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	2000 kHz	PLASTIC/EPOXY		.475 A	1				GULL WING	HYSTERETIC CURRENT MODE			BOOST	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel	3.3 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	3.3 V	DUAL	R-PDSO-G5	1		1.45 mm	1.6 mm			1.2 V		.9 V	e4	NOT SPECIFIED	1	260	2.9 mm	3.3 V	5.5 V
BQ24618RGET	Texas Instruments	BATTERY CHARGE CONTROLLER		24	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1		NMOS		NO LEAD	PULSE WIDTH MODULATION		4.7/28	BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N24	2	28 V	.88 mm	4 mm	Not Qualified	4.7 V			4.7 V	e4	30		260	4 mm		28 V
TPS610981DSER	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	VSON	SQUARE	YES	3000 kHz	PLASTIC/EPOXY		.65 A	1				NO LEAD	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, VERY THIN PROFILE			.5 mm	85 Cel	3.201 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	3.399 V	DUAL	S-PDSO-N6	1		.8 mm	1.5 mm			1.5 V		.7 V	e4	30	2	260	1.5 mm	3.3 V	4.5 V
TPS61032RSAR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	700 kHz	PLASTIC/EPOXY		4.5 A	1				NO LEAD	PULSE WIDTH MODULATION			BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Switching Regulator or Controllers	.65 mm	85 Cel	5 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5 V	QUAD	S-PQCC-N16	2		1 mm	4 mm	Not Qualified		2.4 V		1.8 V	e4	30	1	260	4 mm	5 V	5.5 V
MAX713CSE	Maxim Integrated	BATTERY CHARGE CONTROLLER	COMMERCIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	10 mA	.1 A	1		CMOS		GULL WING		5 V	5	SINGLE	SMALL OUTLINE	SOP16,.25	Power Management Circuits	1.27 mm	70 Cel		CURRENT-MODE	0 Cel	TIN LEAD		DUAL	R-PDSO-G16	1		1.75 mm	3.9 mm	Not Qualified		5 V		4.5 V	e0			245	9.9 mm		5.5 V
MAX713CSE+	Analog Devices	BATTERY CHARGE CONTROLLER	COMMERCIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	10 mA	.1 A	1		CMOS		GULL WING		5 V	5	SINGLE	SMALL OUTLINE	SOP16,.25	Power Management Circuits	1.27 mm	70 Cel		CURRENT-MODE	0 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G16	1		1.75 mm	3.9 mm	Not Qualified		5 V		4.5 V	e3	30		260	9.9 mm		5.5 V
TPS61030PWP	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY		4.5 A	1				GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	1.8 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	DUAL	R-PDSO-G16	2		1.2 mm	4.4 mm	Not Qualified		2.4 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 1.8V TO 5.5V	1.8 V	e4	30	1	260	5 mm		5.5 V
TPS61030PWPG4	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY		4.5 A	1				GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	1.8 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	DUAL	R-PDSO-G16	2		1.2 mm	4.4 mm	Not Qualified		2.4 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 1.8V TO 5.5V	1.8 V	e4	30	1	260	5 mm		5.5 V
LTC3455EUF#PBF	Analog Devices	BATTERY CHARGE CONTROLLER	OTHER	24	HVQCCN	SQUARE	YES	1800 kHz	PLASTIC/EPOXY		4 A	1				NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		CURRENT-MODE	0 Cel	Matte Tin (Sn) - annealed		QUAD	S-PQCC-N24	1		.8 mm	4 mm	Not Qualified		3.6 V			e3	30		260	4 mm
TPS61200DRC	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	10	HVSON	SQUARE	YES	1650 kHz	PLASTIC/EPOXY		1.5 A	1				NO LEAD	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Switching Regulator or Controllers	.5 mm	85 Cel		CURRENT-MODE	-40 Cel			DUAL	S-PDSO-N10			1 mm	3 mm	Not Qualified		1.2 V	ALSO HAS ADJUSTABLE OUTPUT VOLTAGE FROM 1.8V TO 5.5V	.3 V		NOT SPECIFIED		NOT SPECIFIED	3 mm		5.5 V

Switching Regulators & Controllers

Switching regulators and controllers are electronic devices used to regulate the output voltage and current of power supplies. They operate by rapidly switching a power supply circuit between on and off states, resulting in a high-frequency waveform that can be filtered and smoothed to produce a stable output voltage.

Switching regulators and controllers offer several advantages over traditional linear regulators, including higher efficiency and the ability to handle a wider range of input voltages. They are commonly used in applications such as power supplies for computers, LED lighting, and motor control.

Switching regulators and controllers come in a variety of forms, including step-up (boost), step-down (buck), and step-up/down (buck-boost) configurations. They may be designed as integrated circuits (ICs) or as standalone modules.

Switching regulators and controllers typically include feedback control circuits to adjust the output voltage and current, as well as protection circuits to prevent overvoltage, overcurrent, and overtemperature conditions. They may also include features such as soft-start to reduce inrush currents and synchronization with external clock signals.