HVQCCN Switching Regulators & Controllers 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Total Dose (V)	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	Technology	Screening Level	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Control Mode	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Nominal Input Voltage	Additional Features	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Length	Nominal Output Voltage	Maximum Input Voltage
V62/07622-03XE	Texas Instruments	SWITCHING REGULATOR	MILITARY	16	HVQCCN	SQUARE	YES		1100 kHz	PLASTIC/EPOXY		1.5 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	125 Cel	5 V	VOLTAGE-MODE	-55 Cel	NICKEL PALLADIUM GOLD	5 V	QUAD	S-PQCC-N16	2		1 mm	4 mm	Not Qualified		12 V	PFM CONTROL TECHNIQ IS ALSO AVAILABLE	3.1 V	e4	30	1	260	4 mm		17 V
UCD7232RTJ	Texas Instruments	SWITCHING CONTROLLER	AUTOMOTIVE	20	HVQCCN	SQUARE	YES		2000 kHz	PLASTIC/EPOXY			1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel			-40 Cel			QUAD	S-PQCC-N20			.8 mm	4 mm			12 V		2.2 V					4 mm		15 V
DPA02257RGBR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	20	HVQCCN	RECTANGULAR	YES		1000 kHz	PLASTIC/EPOXY		6 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	Switching Regulator or Controllers	.5 mm	85 Cel	.6 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	2 V	QUAD	R-PQCC-N20	2		1 mm	3.5 mm	Not Qualified		5 V	ALSO REQ VIN FROM -0.1 TO 6.5V; ADJUSTABLE OUTPUT MODE FROM 0.6 TO 2 V	1 V	e4	30		260	4 mm		6 V
HPA00835RTER	Texas Instruments	SWITCHING REGULATOR	AUTOMOTIVE	16	HVQCCN	SQUARE	YES		2000 kHz	PLASTIC/EPOXY		4 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	150 Cel	.8 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	4.5 V	QUAD	S-PQCC-N16	2		.8 mm	3 mm			5 V		3 V	e4	30	1	260	3 mm		6 V
HPA01188RGBR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	20	HVQCCN	RECTANGULAR	YES		1000 kHz	PLASTIC/EPOXY			1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	.6 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	2 V	QUAD	R-PQCC-N20	2		1 mm	3.5 mm			5 V	OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 2V, ALSO REQUIRE INPUT VOLTAGE -0.1 TO 6.5	4.5 V	e4	NOT SPECIFIED		260	4 mm		6.5 V
LM21305SQX/NOPB	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	28	HVQCCN	SQUARE	YES		1500 kHz	PLASTIC/EPOXY		5 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	Switching Regulator or Controllers	.5 mm	85 Cel	.6 V	CURRENT-MODE	-40 Cel	MATTE TIN	.6 V	QUAD	S-PQCC-N28	2A		.8 mm	5 mm	Not Qualified		12 V	5 VOLT REGULATING OUTPUT ALSO AVAILABLE	3 V	e3	30	1	260	5 mm	2.5 V	18 V
FX003	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	16	HVQCCN	SQUARE	YES		670 kHz	PLASTIC/EPOXY		20 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	.5 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	2 V	QUAD	S-PQCC-N16	2		.8 mm	3 mm			5 V	OUTPUT VOLTAGE RANGE 0.5 TO 2V	4.5 V	e4	NOT SPECIFIED	1	260	3 mm	1 V	5.5 V
UCD7242MRSJREP	Texas Instruments	DUAL SWITCHING CONTROLLER	MILITARY	32	HVQCCN	SQUARE	YES			PLASTIC/EPOXY		10 A	1			NO LEAD	PULSE WIDTH MODULATION	12 V	12		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32(UNSPEC)	Power Management Circuits	.5 mm	125 Cel			-55 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N32	1	18 V	.9 mm	6 mm		2.2 V				e4	30	2	260	6 mm
UCD7232RTJT	Texas Instruments	SWITCHING CONTROLLER	AUTOMOTIVE	20	HVQCCN	SQUARE	YES		2000 kHz	PLASTIC/EPOXY	10 mA	6 A	1			NO LEAD	PULSE WIDTH MODULATION	12 V		SINGLE	CHIP CARRIER			.5 mm	125 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N20	2	15 V	.8 mm	4 mm	Not Qualified	4.7 V	12 V		4.7 V	e4	30	1	260	4 mm		15 V
LM21305SQ	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	28	HVQCCN	SQUARE	YES		1500 kHz	UNSPECIFIED		10.2 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		CURRENT-MODE	-40 Cel			QUAD	S-XQCC-N28			.8 mm	5 mm			12 V	ALSO OPERATES IN ADJUSTABLE MODE AS LOW AS 0.598V; 5 VOLT OUTPUT ALOS AVAILABLE	3 V					5 mm	2.5 V	18 V
UCD8220RSAR	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	16	HVQCCN	SQUARE	YES		2000 kHz	PLASTIC/EPOXY		4 A	1			NO LEAD	PULSE WIDTH MODULATION			PUSH-PULL	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Switching Regulator or Controllers	.65 mm	105 Cel		VOLTAGE-MODE	-40 Cel			QUAD	S-PQCC-N16			1 mm	4 mm	Not Qualified		12 V	CAN ALSO BE CONFIGURED IN CURRENT MODE	4.5 V					4 mm		15.5 V
UCD3040RGCR	Texas Instruments	SWITCHING CONTROLLER	AUTOMOTIVE	64	HVQCCN	SQUARE	YES		2000 kHz	PLASTIC/EPOXY	80 mA		1			NO LEAD	PULSE WIDTH MODULATION	3.3 V	3.3	SINGLE	CHIP CARRIER	LCC64,.35SQ,20	Power Management Circuits	.5 mm	125 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	S-PQCC-N64	3		1 mm	9 mm	Not Qualified		3.3 V		3 V	e4	NOT SPECIFIED	8	260	9 mm	3.3 V	3.6 V
HPA02165RGTR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	16	HVQCCN	SQUARE	YES		700 kHz	PLASTIC/EPOXY		2.75 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	.75 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5 V	QUAD	S-PQCC-N16	2		1 mm	3 mm			12 V	ALSO REQUIRE VCC 4.5 TO 18 V	2 V	e4	NOT SPECIFIED	1	260	3 mm		18 V
V62/13607-01XE	Texas Instruments	SWITCHING REGULATOR	MILITARY		HVQCCN	RECTANGULAR	YES		600 kHz	PLASTIC/EPOXY		20 A	1			NO LEAD	PULSE WIDTH MODULATION				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				125 Cel	.6 V	VOLTAGE-MODE	-55 Cel	NICKEL PALLADIUM GOLD	57 V	QUAD	R-PQCC-N20	2		1 mm						4.5 V	e4	30	1	260		3.3 V	60 V
LM3311SQX	Texas Instruments	SWITCHING REGULATOR	AUTOMOTIVE	24	HVQCCN	SQUARE	YES		1280 kHz	UNSPECIFIED		2.6 A	1			NO LEAD	PULSE WIDTH MODULATION			BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Switching Regulator or Controllers	.5 mm	125 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		QUAD	S-XQCC-N24	1		.8 mm	4 mm	Not Qualified		2.5 V		2.5 V	e0			260	4 mm		7 V
FX033	Texas Instruments	SWITCHING REGULATOR	OTHER	28	HVQCCN	RECTANGULAR	YES		800 kHz	PLASTIC/EPOXY		13.5 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.14X.18,16	Switching Regulator or Controllers	.4 mm	85 Cel		VOLTAGE-MODE	-10 Cel	MATTE TIN		QUAD	R-PQCC-N28	2		1 mm	3.5 mm	Not Qualified		12 V	ALSO REQ SUPPLY V5 FROM 4.6 TO 5.5 V; OUTPUT VOLTAGE RANGE FROM -0.1 TO 5.5V	3 V	e3	30		260	4.5 mm		22 V
FX007	Texas Instruments	DUAL SWITCHING CONTROLLER	OTHER	48	HVQCCN	SQUARE	YES		600 kHz	PLASTIC/EPOXY		20 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	105 Cel	.25 V	VOLTAGE-MODE	-10 Cel	NICKEL PALLADIUM GOLD	1.52 V	QUAD	S-PQCC-N48	3		1 mm	6 mm			3.3 V	ALSO OPERATES IN 5 VOLT NOMINAL SUPPLY VOLTAGE	3 V	e4	30	2	260	6 mm		28 V
V62/14611-01XE	Texas Instruments	SWITCHING REGULATOR	MILITARY	16	HVQCCN	SQUARE	YES		1200 kHz	PLASTIC/EPOXY		8.25 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK-BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	3 V	CURRENT-MODE	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	38 V	QUAD	S-PQCC-N16	2		.8 mm	3 mm			5 V	OUTPUT VOLTAGE= 2.9V TO 38V	2.9 V	e4	NOT SPECIFIED	1	260	3 mm		32 V
HPA02269RSAR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HVQCCN	SQUARE	YES			PLASTIC/EPOXY		4.5 A	1			NO LEAD	PULSE WIDTH MODULATION			BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N16	2		1 mm	4 mm			2.4 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 1.8V TO 5.5V	1.8 V	e4	30		260	4 mm		5.5 V
V62/19623-01XE	Texas Instruments	SWITCHING REGULATOR	MILITARY	30	HVQCCN	RECTANGULAR	YES	30k Rad(Si)	2200 kHz	PLASTIC/EPOXY		6 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC30,.16X.25,20		.5 mm	125 Cel	1 V	CURRENT-MODE	-55 Cel	NICKEL PALLADIUM GOLD SILVER	30.4 V	QUAD	R-PQCC-N30	3		.8 mm	4 mm			12 V	PFM CONROL ALSO POSSIBLE	3.5 V	e4	30	1	260	6 mm		32 V
LP5550SQ	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	16	HVQCCN	SQUARE	YES		1360 kHz	UNSPECIFIED		.75 A	1	NMOS		NO LEAD	PULSE WIDTH MODULATION		3.3/5	BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,20	Power Management Circuits	.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	TIN LEAD		QUAD	S-XQCC-N16	1		.8 mm	4 mm	Not Qualified		3.6 V	AUTOMATIC PWM/PFM MODE AVAILABLE	3 V	e0			260	4 mm		5.5 V
FX004Z	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	20	HVQCCN	SQUARE	YES		400 kHz	PLASTIC/EPOXY			1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.11SQ,16	Switching Regulator or Controllers	.4 mm	85 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N20	2		.8 mm	3 mm	Not Qualified		5 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.7 TO 1.8V	4.5 V	e4	30		260	3 mm		5.5 V
BQ24130RHLT	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	20	HVQCCN	RECTANGULAR	YES		700 kHz	PLASTIC/EPOXY		4 A	1			NO LEAD	PULSE WIDTH MODULATION		4.5/17	BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20/24,.14X.18,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	13.5 V	QUAD	R-PQCC-N20	2	17 V	1 mm	3.5 mm	Not Qualified	4.5 V			4.5 V	e4	NOT SPECIFIED		260	4.5 mm	6 V	17 V
HPA02256RHLR	Texas Instruments	SWITCHING REGULATOR	AUTOMOTIVE	14	HVQCCN	SQUARE	YES		900 kHz	PLASTIC/EPOXY		5 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	.8 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	15 V	QUAD	S-PQCC-N14	2		1 mm	3.5 mm			12 V	ALSO REQUIRED INPUT VOLTAGE IS 1.6 TO 17V, ALSO OPERATES IN ADJUSTABLE MODE AS LOW AS 0.8VREF	4.5 V	e4	NOT SPECIFIED	1	260	3.5 mm		17 V
FX026	Texas Instruments	SWITCHING REGULATOR	OTHER	28	HVQCCN	RECTANGULAR	YES		800 kHz	PLASTIC/EPOXY		10 A	1			NO LEAD	PULSE WIDTH MODULATION	12 V		BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.14X.18,16	Switching Regulator or Controllers	.4 mm	85 Cel	.6 V	VOLTAGE-MODE	-10 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	2 V	QUAD	R-PQCC-N28	2		1 mm	3.5 mm	Not Qualified		12 V	ALSO REQ SUPPLY 4.6 TO 5.5V; ADJUSTABLE OUTPUT MODE FROM 0.6 TO 2V	3 V	e4	NOT SPECIFIED	1	260	4.5 mm		22 V
UCD3040RGCT	Texas Instruments	SWITCHING CONTROLLER	AUTOMOTIVE	64	HVQCCN	SQUARE	YES		2000 kHz	PLASTIC/EPOXY	80 mA		1			NO LEAD	PULSE WIDTH MODULATION	3.3 V	3.3	SINGLE	CHIP CARRIER	LCC64,.35SQ,20	Power Management Circuits	.5 mm	125 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	S-PQCC-N64	3		1 mm	9 mm	Not Qualified		3.3 V		3 V	e4	NOT SPECIFIED	8	260	9 mm	3.3 V	3.6 V
UCD74106RGMT	Texas Instruments	SWITCHING REGULATOR	AUTOMOTIVE	13	HVQCCN	SQUARE	YES		2000 kHz	PLASTIC/EPOXY		6 A	1			NO LEAD	PULSE WIDTH MODULATION	12 V	12	BUCK	CHIP CARRIER	LCC13(UNSPEC)	Power Management Circuits	.5 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N13	1	18 V	1 mm	3 mm	Not Qualified	2.2 V	12 V		4.5 V	e4	30	1	260	3 mm	3.3 V	16 V
LM3310SQX	Texas Instruments	SWITCHING REGULATOR	AUTOMOTIVE	24	HVQCCN	SQUARE	YES		1500 kHz	UNSPECIFIED		.195 A	1			NO LEAD	PULSE WIDTH MODULATION			BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Switching Regulator or Controllers	.5 mm	125 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		QUAD	S-XQCC-N24	1		.8 mm	4 mm	Not Qualified			ALSO AVAILABLE ADJUSTABLE OUTPUT UPTO 20V	2.5 V	e0			260	4 mm		7 V
BQ24747RHDR	Texas Instruments	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	28	HVQCCN	SQUARE	YES		360 kHz	PLASTIC/EPOXY			1			NO LEAD	PULSE WIDTH MODULATION		7/24	PUSH-PULL	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	Power Management Circuits	.5 mm	125 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N28	2		1 mm	5 mm	Not Qualified		20 V		7 V	e4	30		260	5 mm	3.3 V	24 V
V62/19623-01XE-T	Texas Instruments	SWITCHING REGULATOR	MILITARY	30	HVQCCN	RECTANGULAR	YES	30k Rad(Si)	2200 kHz	PLASTIC/EPOXY		6 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC30,.16X.25,20		.5 mm	125 Cel	1 V	CURRENT-MODE	-55 Cel	NICKEL PALLADIUM GOLD SILVER	30.4 V	QUAD	R-PQCC-N30	3		.8 mm	4 mm			12 V	PFM CONROL ALSO POSSIBLE	3.5 V	e4	30	1	260	6 mm		32 V
HPA02240RVER	Texas Instruments	SWITCHING REGULATOR	OTHER	28	HVQCCN	RECTANGULAR	YES		800 kHz	PLASTIC/EPOXY		13.5 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel	.6 V		-10 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	2 V	QUAD	R-PQCC-N28	2		1 mm	3.5 mm			12 V	OUTPUT VOLTAGE= 0.6V TO 2V	3 V	e4	NOT SPECIFIED	1	260	4.5 mm		22 V
PM5143QRWGTQ1	Texas Instruments	DUAL SWITCHING CONTROLLER	AUTOMOTIVE	40	HVQCCN	SQUARE	YES		2500 kHz	PLASTIC/EPOXY			1		AEC-Q100	NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	150 Cel		CURRENT-MODE	-40 Cel			QUAD	S-PQCC-N40			.9 mm	6 mm			12 V	ALSO AVAILABLE VOUT= 5V; ADJ O/P VOLTAGE= 0.6V TO 55V	3.5 V					6 mm	3.3 V	65 V
LM3311SQ-HIOP	Texas Instruments	SWITCHING REGULATOR	AUTOMOTIVE	24	HVQCCN	SQUARE	YES		1500 kHz	UNSPECIFIED			1			NO LEAD	PULSE WIDTH MODULATION			BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Switching Regulator or Controllers	.5 mm	125 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		QUAD	S-XQCC-N24	1		.8 mm	4 mm	Not Qualified			ALSO OPERATES IN ADJUSTABLE MODE UP TO 20V	2.5 V	e0			260	4 mm		7 V
V62/14612-01XE	Texas Instruments	SWITCHING REGULATOR	MILITARY	16	HVQCCN	SQUARE	YES		2000 kHz	PLASTIC/EPOXY		3.5 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	.8 V	CURRENT-MODE	-55 Cel	NICKEL PALLADIUM GOLD	4.5 V	QUAD	S-PQCC-N16	3		.8 mm	3 mm			5 V		2.95 V	e4	30	1	260	3 mm		6 V
UCD3020RGZR	Texas Instruments	SWITCHING CONTROLLER	AUTOMOTIVE	48	HVQCCN	SQUARE	YES		2000 kHz	PLASTIC/EPOXY	80 mA		1			NO LEAD	PULSE WIDTH MODULATION	3.3 V	3.3	SINGLE	CHIP CARRIER	LCC48,.27SQ,20	Power Management Circuits	.5 mm	125 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	S-PQCC-N48	3		1 mm	7 mm	Not Qualified		3.3 V		3 V	e4	NOT SPECIFIED	6	260	7 mm	3.3 V	3.6 V
HPA02239RUKR	Texas Instruments	DUAL SWITCHING CONTROLLER	AUTOMOTIVE	20	HVQCCN	SQUARE	YES		355 kHz	PLASTIC/EPOXY		20 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	125 Cel	4.5 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.5 V	QUAD	S-PQCC-N20	2		.8 mm	3 mm			12 V	ALSO AVAILABLE 5V OUTPUT VOLTAGE	5 V	e4	NOT SPECIFIED	4	260	3 mm	3.3 V	24 V
LM21305SQX	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	28	HVQCCN	SQUARE	YES		1500 kHz	UNSPECIFIED		10.2 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		CURRENT-MODE	-40 Cel			QUAD	S-XQCC-N28			.8 mm	5 mm			12 V	ALSO OPERATES IN ADJUSTABLE MODE AS LOW AS 0.598V; 5 VOLT OUTPUT ALOS AVAILABLE	3 V					5 mm	2.5 V	18 V
PMR43620MSC3RPERQ1	Texas Instruments	SWITCHING REGULATOR		9	HVQCCN	SQUARE	YES		2200 kHz	PLASTIC/EPOXY		2 A	1		AEC-Q100	NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC9(UNSPEC)			150 Cel	1 V	CURRENT-MODE	-40 Cel		32 V	QUAD	S-PQCC-N9			1 mm	2 mm			13.5 V		3 V			1		2 mm	3.3 V	36 V
FX004	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	20	HVQCCN	SQUARE	YES		400 kHz	PLASTIC/EPOXY			1			NO LEAD	PULSE WIDTH MODULATION	5 V		BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel	.7 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	1.8 V	QUAD	S-PQCC-N20	2		.8 mm	3 mm			5 V	OUTPUT VOLTAGE IN ADJUSTABLE MODE IS 0.7 TO 1.8V	4.5 V	e4	30		260	3 mm		5.5 V
V62/07622-02XE	Texas Instruments	SWITCHING REGULATOR	MILITARY	16	HVQCCN	SQUARE	YES		1100 kHz	PLASTIC/EPOXY		1.5 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	125 Cel	3.3 V	VOLTAGE-MODE	-55 Cel	NICKEL PALLADIUM GOLD	3.3 V	QUAD	S-PQCC-N16	2		1 mm	4 mm	Not Qualified		12 V	PFM CONTROL TECHNIQ IS ALSO AVAILABLE	3.1 V	e4	30	1	260	4 mm	3.3 V	17 V
SN1602044RHLT	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	14	HVQCCN	SQUARE	YES		1760 kHz	PLASTIC/EPOXY		17 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N14	2		1 mm	3.5 mm			12 V	ALSO REQUIRE 1.6 TO 17V INPUT	4.5 V	e4	30		260	3.5 mm		17 V
HPA00589RGCR	Texas Instruments	SWITCHING CONTROLLER	AUTOMOTIVE	64	HVQCCN	SQUARE	YES		2000 kHz	PLASTIC/EPOXY			1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N64	3		1 mm	9 mm			3.3 V		3 V	e4	30		260	9 mm		3.6 V
UCD8620RGWT	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	20	HVQCCN	SQUARE	YES		2000 kHz	PLASTIC/EPOXY		4 A	1			NO LEAD	PULSE WIDTH MODULATION			PUSH-PULL	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.20SQ,25	Switching Regulator or Controllers	.65 mm	105 Cel		VOLTAGE-MODE	-40 Cel			QUAD	S-PQCC-N20			1 mm	5 mm	Not Qualified		12 V	CAN ALSO BE CONFIGURED IN CURRENT MODE	4.5 V					5 mm		15.5 V
LP5550SQX	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	16	HVQCCN	SQUARE	YES		1360 kHz	UNSPECIFIED		.75 A	1	NMOS		NO LEAD	PULSE WIDTH MODULATION		3.3/5	BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,20	Power Management Circuits	.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	TIN LEAD		QUAD	S-XQCC-N16	1		.8 mm	4 mm	Not Qualified		3.6 V	AUTOMATIC PWM/PFM MODE AVAILABLE	3 V	e0			260	4 mm		5.5 V
V62/13622-01XE	Texas Instruments	DUAL SWITCHING CONTROLLER	OTHER	48	HVQCCN	SQUARE	YES		2000 kHz	PLASTIC/EPOXY			1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	115 Cel		VOLTAGE-MODE	-55 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N48	3		1 mm	7 mm			3.3 V		3 V	e4	30	2	260	7 mm		3.6 V
UCD3020RGZT	Texas Instruments	SWITCHING CONTROLLER	AUTOMOTIVE	48	HVQCCN	SQUARE	YES		2000 kHz	PLASTIC/EPOXY	80 mA		1			NO LEAD	PULSE WIDTH MODULATION	3.3 V	3.3	SINGLE	CHIP CARRIER	LCC48,.27SQ,20	Power Management Circuits	.5 mm	125 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	S-PQCC-N48	3		1 mm	7 mm	Not Qualified		3.3 V		3 V	e4	30	6	260	7 mm	3.3 V	3.6 V
UCCD9112RHB	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL	32	HVQCCN	SQUARE	YES		2000 kHz	PLASTIC/EPOXY			1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Switching Regulator or Controllers	.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel			QUAD	S-PQCC-N32			1 mm	5 mm	Not Qualified		3.3 V		3.14 V					5 mm		3.6 V
LM21305SQE/NOPB	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	28	HVQCCN	SQUARE	YES		1500 kHz	PLASTIC/EPOXY		5 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	Switching Regulator or Controllers	.5 mm	85 Cel	.6 V	CURRENT-MODE	-40 Cel	MATTE TIN	.6 V	QUAD	S-PQCC-N28	2A		.8 mm	5 mm	Not Qualified		12 V	5 VOLT REGULATING OUTPUT ALSO AVAILABLE	3 V	e3	30	1	260	5 mm	2.5 V	18 V

Switching Regulators & Controllers

Switching regulators and controllers are electronic devices used to regulate the output voltage and current of power supplies. They operate by rapidly switching a power supply circuit between on and off states, resulting in a high-frequency waveform that can be filtered and smoothed to produce a stable output voltage.

Switching regulators and controllers offer several advantages over traditional linear regulators, including higher efficiency and the ability to handle a wider range of input voltages. They are commonly used in applications such as power supplies for computers, LED lighting, and motor control.

Switching regulators and controllers come in a variety of forms, including step-up (boost), step-down (buck), and step-up/down (buck-boost) configurations. They may be designed as integrated circuits (ICs) or as standalone modules.

Switching regulators and controllers typically include feedback control circuits to adjust the output voltage and current, as well as protection circuits to prevent overvoltage, overcurrent, and overtemperature conditions. They may also include features such as soft-start to reduce inrush currents and synchronization with external clock signals.