Maxim Integrated Switching Regulators & Controllers 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	Technology	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Control Mode	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width (mm)	Qualification	Nominal Input Voltage	Additional Features	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Nominal Output Voltage	Maximum Input Voltage
MAX1687EUE-T	Maxim Integrated	SWITCHING REGULATOR	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		.9 A	1	CMOS	GULL WING	HYSTERETIC CURRENT MODE			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Power Management Circuits	.65 mm	85 Cel	CURRENT-MODE	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified	3 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 1.212 TO 6 V	2.7 V	e0			5 mm		6 V
MAX1719EUT	Maxim Integrated	SWITCHED CAPACITOR CONVERTER	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	200 kHz	PLASTIC/EPOXY		.025 A	1	CMOS	GULL WING				DOUBLER INVERTER	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Other Analog ICs	.95 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	1	1.45 mm	1.625 mm	Not Qualified	5 V		1.6 V	e0	20	240	2.9 mm	-5.5 V	5.5 V
MAX16932CATIU/V+	Maxim Integrated	DUAL SWITCHING CONTROLLER	AUTOMOTIVE	28	HVQCCN	SQUARE	YES	2420 kHz	UNSPECIFIED			1	BICMOS	NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	CURRENT-MODE	-40 Cel	MATTE TIN	QUAD	S-XQCC-N28	1	.8 mm	5 mm		14 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 1 TO 10V, ALSO AVAILABLE VOUT=3.3V	3.5 V	e3	30	260	5 mm	5 V	36 V
MAX630CSA-T	Maxim Integrated	SWITCHING REGULATOR	COMMERCIAL	8	SOP	RECTANGULAR	YES	75 kHz	PLASTIC/EPOXY	.2 mA	.525 A	1	CMOS	GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	70 Cel	VOLTAGE-MODE	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified	6 V		1.9 V	e0			4.9 mm	1.31 V	16.5 V
MAX782RCBX	Maxim Integrated	DUAL SWITCHING CONTROLLER	COMMERCIAL	36	SSOP	RECTANGULAR	YES	330 kHz	PLASTIC/EPOXY	.3 mA		1	BICMOS	GULL WING	PULSE WIDTH MODULATION	15 V	15	PUSH-PULL	SMALL OUTLINE, SHRINK PITCH	SOP36,.4,32	Switching Regulator or Controllers	.8 mm	70 Cel	CURRENT-MODE	0 Cel	TIN LEAD	DUAL	R-PDSO-G36	1	2.64 mm	7.495 mm	Not Qualified	15 V		5.5 V	e0			15.415 mm	5.08 V	30 V
MAX1765EEE-T	Maxim Integrated	SWITCHING REGULATOR	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		1.3 A	1		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Switching Regulator or Controllers	.635 mm	85 Cel	VOLTAGE-MODE	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	1.73 mm	3.9 mm	Not Qualified			.7 V	e0			4.89 mm		5.5 V
MAX5988AETP+	Maxim Integrated	SWITCHING REGULATOR	INDUSTRIAL	20	QCCN	SQUARE	YES		PLASTIC/EPOXY	4.5 mA			BICMOS	NO LEAD		48 V	48		CHIP CARRIER	LCC20,.16SQ,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	MATTE TIN	QUAD	S-PQCC-N20	1			Not Qualified				e3	30	260
MAX17244ETERB+	Maxim Integrated	SWITCHING REGULATOR	INDUSTRIAL	16	HVQCCN	SQUARE	YES	2200 kHz	UNSPECIFIED		4.5 A	1	BICMOS	NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.8 mm	85 Cel	CURRENT-MODE	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	1	.8 mm	5 mm		14 V	ALSO OPERATES IN PFM CONTROL TECHNIQUE; ALSO AVAILABLE VOUT=5V	3.5 V	e3	30	260	5 mm	3.3 V	36 V
MAX733CWE+	Maxim Integrated		COMMERCIAL	16	SOP	RECTANGULAR	YES	210 kHz	PLASTIC/EPOXY		.125 A		CMOS	GULL WING					SMALL OUTLINE	SOP16,.4	Switching Regulator or Controllers	1.27 mm	70 Cel	CURRENT-MODE	0 Cel		DUAL	R-PDSO-G16				Not Qualified
MAX1717EEG-T	Maxim Integrated	SWITCHING CONTROLLER	INDUSTRIAL	24	SSOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY			1		GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE, SHRINK PITCH	SSOP24,.24	Switching Regulator or Controllers	.635 mm	85 Cel	CURRENT-MODE	-40 Cel	TIN LEAD	DUAL	R-PDSO-G24	1	1.73 mm	3.9 mm	Not Qualified	5 V	ALSO REQUIRES A BATTERY VOLTAGE FROM 2 TO 28V	4.5 V	e0		245	8.65 mm		5.5 V
MAX8805WEWEAC+T	Maxim Integrated		INDUSTRIAL	16	FBGA	SQUARE	YES	2000 kHz	PLASTIC/EPOXY		.2 A		BICMOS	BALL					GRID ARRAY, FINE PITCH	BGA16,4X4,20	Switching Regulator or Controllers	.5 mm	85 Cel	VOLTAGE-MODE	-40 Cel	MATTE TIN	BOTTOM	S-PBGA-B16	1			Not Qualified				e3
MAX8720ETX-T	Maxim Integrated	SWITCHING CONTROLLER	INDUSTRIAL	36	HVQCCN	SQUARE	YES	1000 kHz	UNSPECIFIED			1	BICMOS	NO LEAD	PULSE WIDTH MODULATION			PUSH-PULL	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC36,.25SQ,20	Switching Regulator or Controllers	.5 mm	85 Cel	CURRENT-MODE	-40 Cel	TIN LEAD	QUAD	S-XQCC-N36	1	.8 mm	6 mm	Not Qualified	5 V		4.5 V	e0			6 mm		5.5 V
MAX8809AETL+T	Maxim Integrated	POWER FACTOR CONTROLLER	INDUSTRIAL	40	HVQCCN	SQUARE	YES	1200 kHz	UNSPECIFIED			1	BICMOS	NO LEAD	PULSE WIDTH MODULATION				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.2SQ,16	Switching Regulator or Controllers	.4 mm	85 Cel	CURRENT-MODE	-40 Cel	MATTE TIN	QUAD	S-XQCC-N40	1	.8 mm	5 mm	Not Qualified	5 V		4.5 V	e3	30	260	5 mm		5.5 V
MAX1635CAI+	Maxim Integrated	DUAL SWITCHING CONTROLLER	COMMERCIAL	28	SSOP	RECTANGULAR	YES	300 kHz	PLASTIC/EPOXY	.05 mA		1	BICMOS	GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Switching Regulator or Controllers	.65 mm	70 Cel	CURRENT-MODE	0 Cel	MATTE TIN	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	15 V		4.2 V	e3	30	260	10.2 mm	12 V	30 V
MAX8664BEEP+	Maxim Integrated	DUAL SWITCHING CONTROLLER	INDUSTRIAL	20	SSOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY			1	BICMOS	GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE, SHRINK PITCH	SSOP20,.25	Switching Regulator or Controllers	.635 mm	85 Cel	VOLTAGE-MODE	-40 Cel	MATTE TIN	DUAL	R-PDSO-G20	1	1.75 mm	3.9 mm	Not Qualified	5 V		4.5 V	e3	30	260	8.65 mm		5.5 V
MAX864EEE	Maxim Integrated	SWITCHED CAPACITOR CONVERTER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	185 kHz	PLASTIC/EPOXY	18 mA		1	CMOS	GULL WING				DOUBLER INVERTER	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Other Analog ICs	.635 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified			1.75 V	e0	20	240	4.9 mm		6 V
MAX736CWE	Maxim Integrated	SWITCHING REGULATOR	COMMERCIAL	16	SOP	RECTANGULAR	YES	165 kHz	PLASTIC/EPOXY	6 mA	2.5 A	1	CMOS	GULL WING	PULSE WIDTH MODULATION			BUCK-BOOST	SMALL OUTLINE	SOP16,.4	Switching Regulator or Controllers	1.27 mm	70 Cel	CURRENT-MODE	0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified			4 V	e0			10.3 mm	-12 V	8.6 V
MAX1820EUB-T	Maxim Integrated	SWITCHING REGULATOR	INDUSTRIAL	10	TSSOP	SQUARE	YES	1200 kHz	PLASTIC/EPOXY		1.55 A	1		GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Switching Regulator or Controllers	.5 mm	85 Cel	CURRENT-MODE	-40 Cel	TIN LEAD	DUAL	S-PDSO-G10		1.1 mm	3 mm	Not Qualified	3.6 V		2.6 V	e0			3 mm		5.5 V
MAX796CSE	Maxim Integrated	SWITCHING CONTROLLER	COMMERCIAL	16	SOP	RECTANGULAR	YES	330 kHz	PLASTIC/EPOXY		.05 A	1	BICMOS	GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE	SOP16,.25	Switching Regulator or Controllers	1.27 mm	70 Cel	CURRENT-MODE	0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	15 V	REGULATES POSITIVE SECONDARY VOLTAGE	4.5 V	e0		245	9.9 mm	5 V	30 V
MAX17528GTJ+T	Maxim Integrated		INDUSTRIAL	32	QCCN	SQUARE	YES	600 kHz	PLASTIC/EPOXY				BICMOS	NO LEAD					CHIP CARRIER	LCC32,.2SQ,20	Switching Regulator or Controllers	.5 mm	105 Cel	CURRENT-MODE	-40 Cel	MATTE TIN	QUAD	S-PQCC-N32	1			Not Qualified				e3	30	260
MAX724CCM	Maxim Integrated	SWITCHING REGULATOR	COMMERCIAL	7	TO-220	RECTANGULAR	NO	100 kHz	PLASTIC/EPOXY	11 mA	5.5 A	1	BIPOLAR	THROUGH-HOLE	PULSE WIDTH MODULATION			BUCK	FLANGE MOUNT	SIP7,.1,157	Switching Regulator or Controllers	4 mm	70 Cel	VOLTAGE-MODE	0 Cel	TIN LEAD	SINGLE	R-PSFM-T7				Not Qualified			8 V	e0				2.21 V	40 V
MAX851ESA-T	Maxim Integrated	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	8	SOP	RECTANGULAR	YES	120 kHz	PLASTIC/EPOXY		.005 A	1	CMOS	GULL WING				DOUBLER INVERTER	SMALL OUTLINE	SOP8,.25	Other Analog ICs	1.27 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified		ALSO OPERATES IN ADJUSTABLE MODE FROM -0.5V TO 9V	5 V	e0			4.9 mm	-4.1 V	10 V
MAX727HECK	Maxim Integrated	SWITCHING REGULATOR	INDUSTRIAL	5	TO-220	RECTANGULAR	NO	100 kHz	PLASTIC/EPOXY	12 mA	2 A	1	BIPOLAR	THROUGH-HOLE	PULSE WIDTH MODULATION			BUCK	FLANGE MOUNT	ZIP5,.15,.2,67TB	Switching Regulator or Controllers	1.7 mm	85 Cel	VOLTAGE-MODE	-40 Cel	TIN LEAD	SINGLE	R-PSFM-T5				Not Qualified			8 V	e0				5 V	60 V
MAX1653ESE	Maxim Integrated	SWITCHING CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	350 kHz	PLASTIC/EPOXY			1	BICMOS	GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE	SOP16,.25	Switching Regulator or Controllers	1.27 mm	85 Cel	CURRENT-MODE	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	15 V	PFM CONTROL TECHNIQUE IS ALSO POSSIBLEPFM CONTROL TECHNIQUE IS ALSO POSSIBLE	4.5 V	e0			9.9 mm		30 V
MAX787HEKS	Maxim Integrated	SWITCHING REGULATOR	INDUSTRIAL	4		ROUND	NO	120 kHz	METAL	12 mA	5.5 A	1	BIPOLAR	PIN/PEG	PULSE WIDTH MODULATION			BUCK	FLANGE MOUNT	CAN4/5,.45FL	Switching Regulator or Controllers		85 Cel	VOLTAGE-MODE	-40 Cel	TIN LEAD	BOTTOM	O-MBFM-P4				Not Qualified			8 V	e0				5 V	60 V
MAX1836EUT50	Maxim Integrated	SWITCHING REGULATOR	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY		.45 A	1	BICMOS	GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Other Analog ICs	.95 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	1	1.45 mm	1.625 mm	Not Qualified	12 V		4.5 V	e0		245	2.9 mm	5 V	24 V
MAX858ESA-T	Maxim Integrated	SWITCHING REGULATOR	INDUSTRIAL	8	SOP	RECTANGULAR	YES	500 kHz	PLASTIC/EPOXY	.06 mA	.125 A	1	CMOS	GULL WING	PULSE FREQUENCY MODULATION			BOOST	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	85 Cel	CURRENT-MODE	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	2.5 V		.8 V	e0			4.9 mm	5 V	6 V
MAX1889ETE-T	Maxim Integrated	SWITCHING REGULATOR	INDUSTRIAL	16	HVQCCN	SQUARE	YES	1250 kHz	UNSPECIFIED	1 mA	2.8 A	1	BICMOS	NO LEAD	PULSE WIDTH MODULATION	3 V	3	BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.2SQ,32	Power Management Circuits	.8 mm	85 Cel	CURRENT-MODE	-40 Cel	TIN LEAD	QUAD	S-XQCC-N16	1	.8 mm	5 mm	Not Qualified	3 V	ALSO CONTAINS TWO LINEAR-REGULATOR CONTROLLERS	2.7 V	e0			5 mm		5.5 V
MAX724HEKS	Maxim Integrated	SWITCHING REGULATOR	INDUSTRIAL	2	TO-3	ROUND	NO	100 kHz	METAL	12 mA	5.5 A	1	BIPOLAR	PIN/PEG	PULSE WIDTH MODULATION			BUCK	FLANGE MOUNT	CAN4/5,.45FL	Switching Regulator or Controllers		85 Cel	VOLTAGE-MODE	-40 Cel	TIN LEAD	BOTTOM	O-MBFM-P2				Not Qualified			8 V	e0				2.21 V	60 V
MAX1556AETB	Maxim Integrated	SWITCHING REGULATOR	INDUSTRIAL	10	HVSON	SQUARE	YES	1100 kHz	UNSPECIFIED		2.25 A	1	BICMOS	NO LEAD	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Switching Regulator or Controllers	.5 mm	85 Cel	CURRENT-MODE	-40 Cel		DUAL	S-XDSO-N10	1	.8 mm	3 mm	Not Qualified	3.6 V	ALSO OPERATES IN OUTPUT VOLTAGE 3.3V, 2.5V AND 1.5V	2.6 V				3 mm	1.2 V	5.5 V
MAX1531ETJ/V+	Maxim Integrated	SWITCHING CONTROLLER	INDUSTRIAL	32	HVQCCN	SQUARE	YES	575 kHz	UNSPECIFIED			1	BICMOS	NO LEAD	PULSE WIDTH MODULATION			PUSH-PULL	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	CURRENT-MODE	-40 Cel	Matte Tin (Sn)	QUAD	S-XQCC-N32	1	.8 mm	5 mm	Not Qualified	12 V		4.5 V	e3	40	260	5 mm	1.24 V	28 V
MAX731EWE-T	Maxim Integrated	SWITCHING REGULATOR	INDUSTRIAL	16	SOP	RECTANGULAR	YES	215 kHz	PLASTIC/EPOXY	4 mA	1.5 A	1	CMOS	GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE	SOP16,.4	Switching Regulator or Controllers	1.27 mm	85 Cel	CURRENT-MODE	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		2.65 mm	7.5 mm	Not Qualified	3 V		2.5 V	e0			10.3 mm	5 V	5.25 V
MAX723CSE-T	Maxim Integrated	SWITCHING REGULATOR	COMMERCIAL	16	SOP	RECTANGULAR	YES	500 kHz	PLASTIC/EPOXY	.06 mA	1 A	1	CMOS	GULL WING	CONSTANT OFF TIME			BOOST	SMALL OUTLINE			1.27 mm	70 Cel	CURRENT-MODE	0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified		ALSO CONTAINS AN ADDITIONAL CONTROLLER	.9 V	e0			9.9 mm	5 V	5.5 V
MAX636BESA-T	Maxim Integrated	SWITCHING REGULATOR	INDUSTRIAL	8	SOP	RECTANGULAR	YES	50 kHz	PLASTIC/EPOXY	.5 mA	.525 A	1	CMOS	GULL WING	PULSE WIDTH MODULATION			BUCK-BOOST	SMALL OUTLINE			1.27 mm	85 Cel	VOLTAGE-MODE	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified			2.6 V	e0			4.9 mm	-12 V	16.5 V
SI7661DJ	Maxim Integrated	SWITCHED CAPACITOR CONVERTER	INDUSTRIAL	8	DIP	RECTANGULAR	NO	10 kHz	PLASTIC/EPOXY	2 mA	.02 A	1	CMOS	THROUGH-HOLE				DOUBLER INVERTER	IN-LINE	DIP8,.3	Other Analog ICs	2.54 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDIP-T8	1	4.572 mm	7.62 mm	Not Qualified	15 V		4.5 V	e0			9.375 mm	-20 V	20 V
MAX1901ETJ	Maxim Integrated	DUAL SWITCHING CONTROLLER	INDUSTRIAL	32	HVQCCN	SQUARE	YES	550 kHz	UNSPECIFIED		.2 A	1	BICMOS	NO LEAD	PULSE WIDTH MODULATION			PUSH-PULL	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	Switching Regulator or Controllers	.5 mm	85 Cel	CURRENT-MODE	-40 Cel	TIN LEAD	QUAD	S-XQCC-N32	1	.8 mm	5 mm	Not Qualified	15 V		4.2 V	e0		245	5 mm		30 V
MAX16963SATED/V+	Maxim Integrated	DUAL SWITCHING CONTROLLER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES		UNSPECIFIED		1.5 A	1	BICMOS	NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	125 Cel		-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	1	.8 mm	4 mm		5 V	OUTPUT IN ADJUSTABLE MODE IS 0.8V TO 3.6V	2.7 V	e3	30	260	4 mm		5.5 V
MAX5074AUP+T	Maxim Integrated	SWITCHING REGULATOR	AUTOMOTIVE	20	HTSSOP	RECTANGULAR	YES	500 kHz	PLASTIC/EPOXY			1	BICMOS	GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	125 Cel	VOLTAGE-MODE	-40 Cel	MATTE TIN	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified	12 V		11 V	e3	30	260	6.5 mm		76 V
MAX8599ETE+T	Maxim Integrated	SWITCHING CONTROLLER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	1700 kHz	UNSPECIFIED		.035 A	1	BICMOS	NO LEAD	PULSE WIDTH MODULATION			PUSH-PULL	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Switching Regulator or Controllers	.65 mm	85 Cel	VOLTAGE-MODE	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	1	.8 mm	4 mm	Not Qualified	5 V		4.5 V	e3			4 mm		28 V
SI7661BY	Maxim Integrated	SWITCHED CAPACITOR CONVERTER	OTHER	14	SOP	RECTANGULAR	YES	10 kHz	PLASTIC/EPOXY	2 mA	.02 A	1	CMOS	GULL WING				DOUBLER INVERTER	SMALL OUTLINE	SOP14,.25	Other Analog ICs	1.27 mm	85 Cel		-25 Cel	TIN LEAD	DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified	15 V		4.5 V	e0			8.65 mm	-20 V	20 V
MAX632BMJA	Maxim Integrated	SWITCHING REGULATOR	MILITARY	8	DIP	RECTANGULAR	NO	50 kHz	CERAMIC, GLASS-SEALED	2 mA	.45 A	1	CMOS	THROUGH-HOLE	PULSE WIDTH MODULATION			BOOST	IN-LINE	DIP8,.3	Switching Regulator or Controllers	2.54 mm	125 Cel	VOLTAGE-MODE	-55 Cel	TIN LEAD	DUAL	R-GDIP-T8	1	5.08 mm	7.62 mm	Not Qualified			2.4 V	e0				12 V	16.5 V
MAX738CWE-T	Maxim Integrated	SWITCHING REGULATOR	COMMERCIAL	16	SOP	RECTANGULAR	YES	160 kHz	PLASTIC/EPOXY	3 mA	2 A	1	CMOS	GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE			1.27 mm	70 Cel	CURRENT-MODE	0 Cel		DUAL	R-PDSO-G16		2.65 mm	7.5 mm	Not Qualified			6 V		NOT SPECIFIED	NOT SPECIFIED	10.3 mm	5 V	16 V
MAX8599ETE+	Maxim Integrated	SWITCHING CONTROLLER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	1700 kHz	UNSPECIFIED		.035 A	1	BICMOS	NO LEAD	PULSE WIDTH MODULATION			PUSH-PULL	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Switching Regulator or Controllers	.65 mm	85 Cel	VOLTAGE-MODE	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	1	.8 mm	4 mm	Not Qualified	5 V		4.5 V	e3	30	260	4 mm		28 V
MAX727HECM	Maxim Integrated	SWITCHING REGULATOR	INDUSTRIAL	7	TO-220	RECTANGULAR	NO	100 kHz	PLASTIC/EPOXY	12 mA	2 A	1	BIPOLAR	THROUGH-HOLE	PULSE WIDTH MODULATION			BUCK	FLANGE MOUNT	SSIP7(UNSPEC)	Switching Regulator or Controllers		85 Cel	VOLTAGE-MODE	-40 Cel	TIN LEAD	SINGLE	R-PSFM-T7				Not Qualified			8 V	e0				5 V	60 V
MAX16936RAUEA/V+T	Maxim Integrated	SWITCHING REGULATOR	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	2400 kHz	PLASTIC/EPOXY		2.5 A		BICMOS	GULL WING					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.635 mm	125 Cel	CURRENT-MODE	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	1			Not Qualified				e3	30	260
MAX8716ETG+T	Maxim Integrated	DUAL SWITCHING CONTROLLER	INDUSTRIAL	24	HVQCCN	SQUARE	YES	575 kHz	UNSPECIFIED		3.3 A	1	BICMOS	NO LEAD	PULSE WIDTH MODULATION			PUSH-PULL	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Switching Regulator or Controllers	.5 mm	85 Cel	CURRENT-MODE	-40 Cel	MATTE TIN	QUAD	S-XQCC-N24	1	.8 mm	4 mm	Not Qualified	12 V		4 V	e3	30	260	4 mm		26 V
MAX1835EUT-T	Maxim Integrated	SWITCHING REGULATOR	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY		1 A	1	BICMOS	GULL WING				BOOST	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	1	1.45 mm	1.625 mm	Not Qualified	2 V		1.5 V	e0		245	2.9 mm		5.5 V
MAX1822EPA	Maxim Integrated	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	8	DIP	RECTANGULAR	NO	90 kHz	PLASTIC/EPOXY			1		THROUGH-HOLE				DOUBLER INVERTER	IN-LINE			2.54 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDIP-T8	1	4.572 mm	7.62 mm	Not Qualified	5 V		3.5 V	e0			9.375 mm		16.5 V

Switching Regulators & Controllers

Switching regulators and controllers are electronic devices used to regulate the output voltage and current of power supplies. They operate by rapidly switching a power supply circuit between on and off states, resulting in a high-frequency waveform that can be filtered and smoothed to produce a stable output voltage.

Switching regulators and controllers offer several advantages over traditional linear regulators, including higher efficiency and the ability to handle a wider range of input voltages. They are commonly used in applications such as power supplies for computers, LED lighting, and motor control.

Switching regulators and controllers come in a variety of forms, including step-up (boost), step-down (buck), and step-up/down (buck-boost) configurations. They may be designed as integrated circuits (ICs) or as standalone modules.

Switching regulators and controllers typically include feedback control circuits to adjust the output voltage and current, as well as protection circuits to prevent overvoltage, overcurrent, and overtemperature conditions. They may also include features such as soft-start to reduce inrush currents and synchronization with external clock signals.